BACKGROUND: Due to its ability to provide stable fixation and permit early mobilization, volar plating has become the recommended technique for the surgical stabilization of distal radius fractures. The extensor pollicis longus (EPL) tendon may be injured or ruptured as a result of undetected screw penetration or drill plunging. During surgery, it is critical to detect any potential screw penetration so that it can be corrected.
METHODS: A 32-year-old woman presented six weeks post-distal radius plating with an inability to extend her left thumb. Clinical examination revealed loss of extension at the interphalangeal joint, stiff wrist, tender point over the dorsal aspect of the wrist, and an intact sensory nerve function.
CONCLUSIONS: Dynamic ultrasound and magnetic resonance imaging (MRI) both revealed no evidence of tendon rupture or EPL tendon movement. X-rays revealed the distal epiphyseal screws penetrating the far cortex. Intraoperatively, the EPL tendon was found to be impinged by a screw. The tendon was released, tenolysis was performed, and the distal screws were shortened.
CONCLUSIONS: In order to assess screw penetration into the far cortex, volar plating for distal radius fractures should be performed using intraoperative imaging views such as lateral, 45-degree supination, 45-degree pronation, dorsal tangential, and skyline views. Timely interventions after distal radius fracture fixation preserve tendon function, and early detection of tendon compromise is essential to preventing additional damage.

OBJECTIVE: Volar locking plates designed for far distal radius fracture fixation can have a significant hardware removal rate and risk of tendon rupture. Plate design has a role in the rate of complications. This study assessed the hardware removal and tendon rupture rate of the Acu-Loc 2 volar distal radius (VDR) plate often used in the treatment of far distal radial fractures.
METHODS: We searched our electronic healthcare records system for all patients who had undergone fixation with an Acu-Loc 2 VDR plate (Acumed, Hillsboro, OR, USA) at a tertiary center between January 2017 and December 2021. Patients were excluded if their follow-up time was less than one year or if they could not be contacted by telephone follow-up. Pre-operative radiographs were examined for fracture classification. Follow-up time was defined as the last contact in the clinic or by telephone.
RESULTS: A total of 92 patients underwent an open reduction and internal fixation (ORIF) with an Acu-Loc 2 VDR plate. A total of 85 patients met the inclusion criteria for this study. Our cohort included 33 males (38.8%) and 52 females (61.2%). The mean age was 50 years. Twenty-seven fractures (31.0%) were extra-articular, and 60 fractures (69.0%) were intra-articular. The mean follow-up time for the patients was 593.3 days (range 369 to 1185 days). Four patients (4.7%) had their hardware removed. Three (3.5%) patients underwent removal due to tendon irritation and one patient (1.2%) due to a peri-prosthetic fracture around the plate. There were no tendon ruptures recorded.
CONCLUSIONS: The Acu-Loc 2 VDR plate had a low medium-term hardware removal rate and no tendon ruptures. These rates are lower than would be expected when compared with other far distal plate designs.

Ulnar variance is an important radiological parameter for good functional outcome after distal radius fracture osteosynthesis. Secondary loss of reduction due to radial shortening is a common complication after volar locking plate fixation. Some authors recommend beginning by placing the most ulnar epiphyseal screw, ensuring that it is positioned as close as possible to the distal radioulnar and radiocarpal joints. The hypothesis of our study was that the positioning of the ulnar epiphyseal screw relative to the distal radioulnar and radiocarpal joints influences the maintenance of reduction during follow-up. 190 distal radius fractures were treated with volar locking plate fixation and divided into two cohorts: cohort A with <2 mm and cohort B with ≥2 mm loss of ulnar variance. Minimum follow-up was 45 days. The positioning of the most ulnar epiphyseal screw was evaluated using a single variable, the ulno-distal index. Means were compared using t-tests and proportions using chi-squared tests. The alpha risk was set at 5%. The intra- and inter-observer reliability of the ulno-distal index measurement were assessed. Mean ulno-distal index was significantly lower in cohort A at 11.28 mm, compared to 13.33 mm in cohort B; p < 0.0001. Ulno-distal index <12 mm was a significant protective factor: p < 0.0001 and relative risk 0.558. No other intrinsic or extrinsic factors of secondary loss of reduction significantly influenced the risk of ulnar variance alteration. The study confirmed the hypothesis that, in distal radius fracture treated with volar locking plate fixation, the closer the ulnar epiphyseal screw to the distal radioulnar joint and radiocarpal joint, the lower the risk of ulnar variance alteration.

Fractures involving the lunate facet of the distal radius (commonly called the volar ulnar corner or \"critical corner\") are often difficult to recognize radiographically. \"Lunate facet escape\" refers to the displacement of this fragment after attempted distal radius fracture closed or open reduction methods. Lunate facet escape can have severe consequences including carpal collapse with pain, instability, and arthritis. Challenges to lunate facet fixation include irregular cortical contour that makes plate fixation difficult, as well as deforming forces by inserting structures. The goal of the management of a distal radius fracture with lunate facet involvement is first identification, then adequate stabilization until osseous healing occurs. However, subsequent lunate facet escape can pose a challenging clinical and surgical dilemma. Here we discuss our preferred approach to treat lunate facet escape after distal radius fracture volar locking plating failure.

Background  Open reduction and internal fixation of distal radius fractures is one of the most common procedures performed in wrist surgery. The use of volar locking plate has gained increasing interest in the past decade. Epiphyseal fixation can be done either with locking screws or smooth locking pegs, with no evidence supporting the use of one rather than the other. Purpose  The aim of this study is to compare the stability of distal radius fixation by volar locking plate using locking screws or smooth locking pegs. Methods  Adult patients with A2-A3 AO fractures treated with a volar plate with locking screws only or smooth locking pegs only were retrospectively included. Radiographic assessment was performed to evaluate extra-articular parameters in the intraoperative postreduction and fixation period and after bony healing. Forty-seven distal radius fractures were included. Results  Twenty-four fractures had fixation with locking screws and 23 had fixation with smooth locking pegs. For both groups, all radiographic parameters measured showed a statistically significant difference between the intraoperative postreduction and fixation period and the remote postoperative period after union of the fracture ( p  < 0.05) attesting a slight loss of reduction. Nevertheless, there were no significant differences between the groups in radiographic extra-articular parameters. Conclusion  This clinical study shows that there is no difference in stability fixation between locking screws or smooth locking pegs in A2-A3 distal radius fractures. Clinical Relevance  The use of smooth locking pegs only for epiphyseal fixation appears to be safe in volar plating of A2-A3 distal radius fractures in adult patients and could be an alternative to locking screws. More clinical data are needed to confirm these results. Level of Evidence  Level III; retrospective comparative study.

UNASSIGNED: We assessed factors associated with change in radiographic teardrop angle following volar locking plate (VLP) fixation of volarly displaced intra-articular distal radius fractures with volar ulnar fragments (VUF) within the ICUC database. The primary outcome was change in radiographic alignment on follow-up imaging, defined as a change in teardrop angle from intra-operative fluoroscopy greater than 5°.
UNASSIGNED: Patients with distal radius fractures treated with a VLP within the ICUC database, an international collaborative and publicly available dataset, were identified. The primary outcome was volar rim loss of reduction on follow-up imaging, defined as a change in radiographic alignment from intra-operative fluoroscopy, teardrop angle less than 50°, or loss of normal radiocarpal alignment. Secondary outcomes were final range of motion (ROM) of the affected extremity. Radiographic Soong classification was used to grade plate position. Descriptive statistics were used to assess variables\' distributions. A Random Forest supervised machine learning algorithm was used to classify variable importance for predicting the primary outcome. Traditional descriptive statistics were used to compare patient, fracture, and treatment characteristics with volar rim loss of reduction. Volar rim loss of reduction and final ROM in degrees and as compared with contralateral unaffected limb were also assessed.
UNASSIGNED: Fifty patients with volarly displaced, intra-articular distal radius fractures treated with a VLP were identified. Six patients were observed to have a volar rim loss of reduction, but none required reoperation. Volar ulnar fragment size, Soong grade 0, and postfixation axial plate position in relation to the sigmoid notch were significantly associated (P < .05) with volar rim loss of reduction. All cases of volar rim loss of reduction occurred when VUF was 10.8 mm or less.
UNASSIGNED: The size of the VUF was the most important variable for predicting volar rim loss of reduction followed by postfixation plate position in an axial position to the sigmoid notch and the number of volar fragments in the Random Forest machine learning algorithm. There were no significant differences in ROM between patients with volar ulnar escape and those without.

OBJECTIVE: The relationship between volar fragment size and postoperative volar tilt loss in complete articular distal radius fracture is not well known. In this study, we measured precise radiological parameters to help identify other factors that might contribute to volar tilt loss.
METHODS: We retrospectively reviewed the radiological examinations and charts of 256 patients with distal radial fracture who underwent volar locking plate fixation between March 2014 and July 2022. Radiological parameters were measured based on preoperative CT and immediate postoperative radiographs. Univariate and multivariate linear regression analysis was performed to identify relevant factors associated with volar tilt loss following volar locking plate fixation. The receiver operating characteristic curve was used to identify the cutoff value of the independent parameters.
RESULTS: On univariate analysis, 2 radiologic parameters on preoperative CT (volar fragment length at the lunate fossa, and teardrop angle) and 4 on immediate postoperative X-ray (radial inclination, radial length, capitate shift, and volar tilt) were significantly associated with postoperative volar tilt loss. On multivariate linear regression analysis, the risk of volar tilt loss increased as the capitate moved toward the back of the radial shaft. The cut-off for anteroposterior length in the lunate fossa was 6.5 mm.
CONCLUSIONS: AO/OTA type-C distal radius fractures with <6.5 mm anteroposterior length in the lunate fossa had significantly higher rates of malunion with dorsal deformity. In addition, preoperative teardrop angle <37.2 ° and immediate postoperative volar tilt <3.7º are also predictors of postoperative volar tilt loss.

We report the case of a 61-year-old woman with right-sided flexor pollicis longus (FPL) tendon ruptured a month after volar locking plate fixation. Five months after the initial operation, hardware removal and reconstruction of the FPL tendon with the ipsilateral palmaris longus were performed. The proximal stump of the ruptured FPL tendon was found in the space between the distal radius and plate.

Background  Volar locking plate fixation (VLP) is commonly used to treat distal radius fractures (DRF). Risk of dorsal compartment injury with distal screw hole fixation has been studied; however, the risk with proximal screw hole fixation is not well studied. Purpose  The goal of this study was to investigate the risk of dorsal structure injury from the screw holes proximal to the two distal rows. Methods  Nine cadaveric forearms were used. After volar distal radius exposure, a long VLP was applied. Kirschner wires were placed through the most proximal holes into the dorsal compartments. The extensor structures penetrated were noted and tagged with hemoclips. The distance from the dorsal cortex to the structures was measured. Results  The abductor pollicis longus (APL) and extensor pollicis brevis (EPB) muscle bodies were only penetrated; no tendons were penetrated. Proportion of muscle penetration increased with the more proximal screw holes. EPB was more likely to be penetrated distally and APL proximally; both were injured at holes 2 and 3. The extensors were 2 mm from the dorsal cortex of the radius on average; this did not decrease with compression of the forearm. Conclusions  This is the first study to examine the anatomic risk of extensor structure injury with VLP proximal screw hole penetration. No extensor tendons were penetrated by these proximal screw holes; first dorsal compartment muscle bellies may be irritated with overpenetration. Our findings suggest that proximal VLP screws do not need to be downsized if they are not over 2 mm prominent.

BACKGROUND: Volar plate malpositioning in the treatment of distal radial fracture can lead to tendinitis or even tendon tear, especially when the plate position is very distal. We studied the impact of design on plate position in the distal radius. The primary aim was to compare the position of six volar wrist plates relative to the watershed line using the Soong classification. The secondary objectives were to assess the epidemiology of volar locking plate fixation within the administrative Département of Finistère (northwestern France) and to study whether the type of fracture played a role in plate position.
OBJECTIVE: The plate design itself influences positioning relative to the watershed line on the Soong classification.
METHODS: A total of 2723 volar locking plate fixation cases were analyzed and categorized according to the Soong classification. Plates used were divided into six groups based on design: Zimmer Biomet®, Newclip Technics®, Stryker®, Synthes®, Medartis® and Medartis® Footprint. The number of Soong 0 + 1 plates (i.e., plates graded 0 and 1 taken together) was determined for each design, then compared using the Marascuilo procedure with a significance level of α = 0.05.
RESULTS: On the Marascuilo procedure, we found significant differences in the number of Soong grade 0 + 1 plates. The Zimmer Biomet and Newclip Technics® plates were significantly more often proximal to the watershed line than the Synthes and Medartis Footprint plates. Plate position with the Medartis® design was significantly more proximal to the watershed line than for its companion design, the Medartis® Footprint plate. The rate of volar locking plate fixation of distal radial fractures over the past 10 years increased in Finistère. Also, the type of fracture affected the choice of plate when different designs were available within a hospital center (Medartis® Footprint plate used in 2R3A fractures).
CONCLUSIONS: Our study highlights a significant difference in volar locking plate position relative to the watershed line between the various models available. Plate design is a deciding factor when treating distal radial fracture, to avoid impingement when implant removal is not routinely planned.
METHODS: