CA125 (carbohydrate antigen 125) is an important biomarker of ovarian cancer, so developing effective method for its detection is of great significance. In the present work, a novel sandwich-like electrochemical immunosensor (STEM) of CA125 was constructed by preparing nanoribbon-like Ti3C2Tx MXenes (Ti3C2TxNR) to immobilize primary antibody (PAb) of CA125 and UIO-66-NH2 MOFs structure to immobilize second antibody (SAb) and electroactive toluidine blue (Tb) probe. In this designed STEM assay, the as-prepared Ti3C2TxNR nanohybrid offers the advantages in large surface area and conductivity as carrier, and UIO-66-NH2 provided an ideal platform to accommodate SAb and a large number of Tb molecules as signal amplifier. In the presence of CA125, the peak currents of Tb from the formed STEM structure increase with the increase of CA125 level. After optimizing the related control conditions, a wide linear range (0.2-150.0 U mL-1) and a very low detection limit (0.05 U mL-1) of CA125 were achieved. It\'s thus expected the developed STEM strategy has important applications for the detection of CA125.

Unique structure and ability to control the surface termination groups of MXenes make these materials extremely promising for solid lubrication applications. Due to the challenging delamination process, the tribological properties of two-dimensional MXenes particles have been mostly investigated as additive components in the solvents working in the macrosystem, while the understanding of the nanotribological properties of mono- and few-layer MXenes is still limited. Here, we investigate the nanotribological properties of mono- and double-layer Ti3C2Tx MXenes deposited by the Langmuir-Schaefer technique on SiO2/Si substrates. The friction of all of the samples demonstrated superior lubrication properties with respect to SiO2 substrate, while the friction force of the monolayers was found to be slightly higher compared to double- and three-layer flakes, which demonstrated similar friction. The coefficient of friction was estimated to be 0.087 ± 0.002 and 0.082 ± 0.003 for mono- and double-layer flakes, respectively. The viscous regime was suggested as the dominant friction mechanism at high scanning velocities, while the meniscus forces affected by contamination of the MXenes surface were proposed to control the friction at low sliding velocities.

As a typical family of two-dimensional (2D) materials, MXenes present physiochemical properties and potential for use in energy storage applications. However, MXenes suffer some of the inherent disadvantages of 2D materials, such as severe restacking during processing and service and low capacity of energy storage. Herein, a MXene@N-doped carbonaceous nanofiber structure is designed as the anode for high-performance sodium- and potassium-ion batteries through an in situ bioadsorption strategy; that is, Ti3C2Tx nanosheets are assembled onto Aspergillus niger biofungal nanoribbons and converted into a 2D/1D heterostructure. This microorganism-derived 2D MXene-1D N-doped carbonaceous nanofiber structure with fully opened pores and transport channels delivers high reversible capacity and long-term stability to store both Na+ (349.2 mAh g-1 at 0.1A g-1 for 1000 cycles) and K+ (201.5 mAh g-1 at 1.0 A g-1 for 1000 cycles). Ion-diffusion kinetics analysis and density functional theory calculations reveal that this porous hybrid structure promotes the conduction and transport of Na and K ions and fully utilizes the inherent advantages of the 2D material. Therefore, this work expands the potential of MXene materials and provides a good strategy to address the challenges of 2D energy storage materials.