In this work, the selenylation Codonopsis pilosula polysaccharide (Se-CPPS) were synthesized using an optimized microwave-assisted method. Then, physicochemical properties, including molecular weight, particle size, valence state of selenium, antioxidant capacity, release mechanism of selenium under gastrointestinal conditions, as well as their effects on HT-29 cell viability were comprehensively investigated. The results demonstrated that Se-CPPS with the highest selenium content (21.71 mg/g) was synthesized using 0.8% nitric acid concentration under microwave conditions of 90 min at 70 °C. FTIR and XPS analysis revealed that Se was bound to the polysaccharide chain in the form of O-Se-O and O-H···Se, with a valence state of either 0 or +4. In vitro investigations on antioxidant activity and selenium release capacity indicated that selenization not only enhanced the antioxidant activity of CPPS but also endowed Se-CPPS with robust selenium release capability in simulated gastric digestion. The effects of Se-CPPS on HT-29 cells was further investigated by CCK-8 method. The results showed that the selenide modification effectively reduced the toxicity of Na2SeO3 and enhanced the viability of CPPS. The findings of this study offer valuable methodological guidance for the synthesis of Se-polysaccharides with superior functional properties.

Selenium (Se) has been mobilised by leaching from coal and associated waste rock exposed by mining activities in Western Canada, with deleterious impact on aquatic wildlife. Waste rock characterisation indicates that up to 7% of the Se, as Se(IV), may be associated with organic matter, with ≈9%, as Se(0), associated with euhedral pyrite. Small 1-2 µm mineral particles with average Se concentration of 1.0 ± 0.4 wt% account for the remaining Se with the largest components likely to be associated with Fe oxide/hydroxide/carbonate as Se(0) and framboidal pyrite as Se(IV) and Se(0). No evidence was found for the presence of Se(-I), Se(-II) or Se(VI). In the first 8 weeks of leaching Se release was not correlated to the addition of aqueous silicate, added to aid pyrite passivation, but was reduced by approximately one third when the waste was treated with manure. This suggests the primary initial source of leached Se was not pyrite. Added organic C results in increased microbial numbers, particularly aerobic microbes, and promotes the formation of extensive coating of extracellular polymeric substances resulting in depletion of O2 at particle surfaces, reducing oxidation of Se(IV) and therefore reducing the leach rate of Se. Subsequent to 8 weeks of leaching the rates of release of Se from the treated wastes were similar regardless of treatment strategy but were reduced as compared to the untreated waste rock, suggestive of partial framboidal pyrite geochemical and microbial passivation. Se leaching was not correlated to S leaching, but the source(s) of the leached S was not known as approximately half of the S within the waste rock was non-sulfidic. These results indicate that utilisation of local organic carbon-containing wastes for coverage of coal waste rock may be a cost-effective strategy to reduce Se leaching to acceptable rates of release regardless of whether the Se is associated with framboidal pyrite or organics.

The release of selenium (Se) during coal combustion can have serious impacts on the ecological environment and human health. Therefore, it is very important to study the factors that concern the release of Se from coal combustion. In this paper, the characteristics of the release of Se from coal combustion, pyrolysis, and gasification of different coal species under different conditions are studied. The results show that the amount of released Se increases at higher combustion temperatures. There are obvious increases in the amount of released Se especially in the temperature range of 300 to 800 °C. In addition, more Se is released from the coal gasification than coal combustion process, but more Se is released from coal combustion than pyrolysis. The type of coal, rate of heating, type of mineral ions, and combustion atmosphere have different effects on the released percentage of Se. Therefore, having a good understanding of the factors that surround the release of Se during coal combustion, and then establishing the combustion conditions can reduce the impacts of this toxic element to humans and the environment.