Stereology and semiautomated binary image histomorphometry are two common methods used for morphometry of nerve fibres. Nucleator probe can be used for the estimation of morphometric parameters like diameter, perimeter, area and volume of a structure that is approximately either a circle or a sphere. In this study, we estimated these parameters with the help of ImageJ software on calibrated transmission electron micrographs. We procured samples of the cochlear nerve (CN) during winter months, within 6-12 hours of death, to reduce post-mortem autolytic changes. The temporal bones containing the CN were fixed by immersion in chilled paraformaldehyde. After dissecting out from the petrous part of the temporal bone, the CN were osmicated and processed for embedding in resin. From the resin blocks, silver coloured (70 nm) ultrathin sections were cut and picked on 300-mesh copper grids, stained with uranyl acetate and lead citrate and viewed under Tecnai G2-20 transmission electron microscope. The transmission electron micrographs had scale bars embedded into them by the software at the time of imaging, and the morphometric parameters of randomly selected nerve fibres were measured using the ImageJ software. The ImageJ software could become a low-cost and dependable tool for nerve fibre morphometry.•Nucleator probe is used for the estimation of morphometric parameters like diameter, perimeter, area or volume•Morphometric parameters were estimated by the ImageJ software on calibrated transmission electron micrographs•The ImageJ software could become a low-cost and dependable tool for nerve fibre morphometry.

One route of human exposure to environmental chemicals is oral uptake. This is primarily true for chemicals that may leach from food packaging materials, such as bisphenols and phthalate esters. Upon ingestion, these compounds are transported along the intestinal tract, from where they can be taken up into the blood stream or distributed to mucosal sites. At mucosal sites, mucosal immune cells and in the blood stream peripheral immune cells may be exposed to these chemicals potentially modulating immune cell functions. In the present study, we investigated the impact of three common bisphenols and two phthalate esters on mucosal-associated invariant T (MAIT) cells in vitro, a frequent immune cell type in the intestinal mucosae and peripheral blood of humans. All compounds were non-cytotoxic at the chosen concentrations. MAIT cell activation was only slightly affected as seen by flow cytometric analysis. Phthalate esters did not affect MAIT cell gene expression, while bisphenol-exposure induced significant changes. Transcriptional changes occurred in ∼ 25 % of genes for BPA, ∼ 22 % for BPF and ∼ 8 % for BPS. All bisphenols down-modulated expression of CCND2, CCL20, GZMB and IRF4, indicating an effect on MAIT cell effector function. Further, BPA and BPF showed a high overlap in modulated genes involved in cellular stress response, activation signaling and effector function suggesting that BPF may not be safe substitute for BPA.

The emerging disciplines of lipidomics and metabolomics show great potential for the discovery of diagnostic biomarkers, but appropriate pre-analytical sample-handling procedures are critical because several analytes are prone to ex vivo distortions during sample collection. To test how the intermediate storage temperature and storage period of plasma samples from K3EDTA whole-blood collection tubes affect analyte concentrations, we assessed samples from non-fasting healthy volunteers (n = 9) for a broad spectrum of metabolites, including lipids and lipid mediators, using a well-established LC-MS-based platform. We used a fold change-based approach as a relative measure of analyte stability to evaluate 489 analytes, employing a combination of targeted LC-MS/MS and LC-HRMS screening. The concentrations of many analytes were found to be reliable, often justifying less strict sample handling; however, certain analytes were unstable, supporting the need for meticulous processing. We make four data-driven recommendations for sample-handling protocols with varying degrees of stringency, based on the maximum number of analytes and the feasibility of routine clinical implementation. These protocols also enable the simple evaluation of biomarker candidates based on their analyte-specific vulnerability to ex vivo distortions. In summary, pre-analytical sample handling has a major effect on the suitability of certain metabolites as biomarkers, including several lipids and lipid mediators. Our sample-handling recommendations will increase the reliability and quality of samples when such metabolites are necessary for routine clinical diagnosis.

The layer-by-layer application of biopolymeric coatings to mandarin fruits as a postharvest treatment to improve fruit coating efficacy has been reported. A single 1 % (w/v) chitosan application was evaluated, and polyelectrolyte complexes such as 1.5 % (w/v) alginate/chitosan, 1 % (w/v) hydroxypropyl methylcellulose/chitosan, and 0.2 % (w/v) locust bean gum/chitosan were applied to mandarin fruits. The quality of coated mandarin fruits was observed at temperatures: 20 ± 2 °C (up to 10 days) and 5 °C (up to 28 days). Changes in the fruit metabolism were observed by evaluating bioactive compounds (polyphenolic compounds and flavonoids), antioxidant activity, and organic acids during the preservation of mandarin fruits. All of the tested combinations of layer-by-layer coatings significantly impacted the quality of mandarin fruits throughout storage, both at room temperature and cold storage, respectively. The overall best performance was observed for a layer-by-layer hydroxypropyl methylcellulose/chitosan coating in terms of visual aspects, bioactive compounds, antioxidant activity, and organic acids content.

UNASSIGNED: Induction of potent, HBV-specific immune responses is crucial to control and finally cure HBV. The therapeutic hepatitis B vaccine TherVacB combines protein priming with a Modified Vaccinia virus Ankara (MVA)-vector boost to break immune tolerance in chronic HBV infection. Particulate protein and vector vaccine components, however, require a constant cooling chain for storage and transport, posing logistic and financial challenges to vaccine applications. We aimed to identify an optimal formulation to maintain stability and immunogenicity of the protein and vector components of the vaccine using a systematic approach.
UNASSIGNED: We used stabilizing amino acid (SAA)-based formulations to stabilize HBsAg and HBV core particles (HBcAg), and the MVA-vector. We then investigated the effect of lyophilization and short- and long-term high-temperature storage on their integrity. Immunogenicity and safety of the formulated vaccine was validated in HBV-naïve and adeno-associated virus (AAV)-HBV-infected mice.
UNASSIGNED: In vitro analysis proved the vaccine\'s stability against thermal stress during lyophilization and the long-term stability of SAA-formulated HBsAg, HBcAg and MVA during thermal stress at 40 °C for 3 months and at 25 °C for 12 months. Vaccination of HBV-naïve and AAV-HBV-infected mice demonstrated that the stabilized vaccine was well tolerated and able to brake immune tolerance established in AAV-HBV mice as efficiently as vaccine components constantly stored at 4 °C/-80 °C. Even after long-term exposure to elevated temperatures, stabilized TherVacB induced high titre HBV-specific antibodies and strong CD8+ T-cell responses, resulting in anti-HBs seroconversion and strong suppression of the virus in HBV-replicating mice.
UNASSIGNED: SAA-formulation resulted in highly functional and thermostable HBsAg, HBcAg and MVA vaccine components. This will facilitate global vaccine application without the need for cooling chains and is important for the development of prophylactic as well as therapeutic vaccines supporting vaccination campaigns worldwide.
UNASSIGNED: Therapeutic vaccination is a promising therapeutic option for chronic hepatitis B that may enable its cure. However, its application requires functional cooling chains during transport and storage that can hardly be guaranteed in many countries with high demand. In this study, the authors developed thermostable vaccine components that are well tolerated and that induce immune responses and control the virus in preclinical mouse models, even after long-term exposure to high surrounding temperatures. This will lower costs and ease application of a therapeutic vaccine and thus be beneficial for the many people affected by hepatitis B around the world.

UNASSIGNED: Optimizing antimicrobial therapy to attain drug exposure that limits the emergence of resistance, effectively treats the infection, and reduces the risk of side effects is of a particular importance in critically ill patients, in whom normal functions are augmented or/and are infected with pathogens less sensitive to treatment. Achievement of these goals can be enhanced by therapeutic drug monitoring (TDM) for many antibiotics. A liquid chromatography tandem mass spectrometry (LC-MS/MS) method is presented here for simultaneous quantification of ten antimicrobials: cefazolin (CZO), cefepime (CEP), cefotaxime (CTA), ceftazidime (CTZ), ciprofloxacin (CIP), flucloxacillin (FLU), linezolid (LIN), meropenem (MER), piperacillin (PIP) and tazobactam (TAZ) in human plasma.
UNASSIGNED: Plasma samples were precipitated with acetonitrile and injected into the LC-MS/MS. Chromatographic separation was on a Waters Acquity BEH C18 column. Compounds were eluted with water and acetonitrile containing 0.1 % formic acid, using a gradient (0.5-65 % B), in 3.8 min. The flow rate was 0.4 mL/min, and the run time was 5.8 min.
UNASSIGNED: The calibration curves were linear across the tested concentration ranges (0.5-250, CZO, CEP, CTA, CTZ and FLU; 0.2-100, MER and TAZ; 0.1-50, CIP and LIN and 1-500 mg/L, PIP). The intra and inter-day imprecision was < 11 %. Accuracy ranged from 95 to 114 %. CTZ and MER showed ionization suppression while CIP showed ionization enhancement, which was normalized with the use of the internal standard.
UNASSIGNED: An LC-MS/MS method for simultaneous quantification of ten antimicrobials in human plasma was developed for routine TDM.

Tumour development and progression is dependent upon tumour cell interaction with the tissue stroma. Bioengineering the tumour-stroma microenvironment (TME) into 3D biomimetic models is crucial to gain insight into tumour cell development and progression pathways and identify therapeutic targets. Ameloblastoma is a benign but locally aggressive epithelial odontogenic neoplasm that mainly occurs in the jawbone and can cause significant morbidity and sometimes death. The molecular mechanisms for ameloblastoma progression are poorly understood. A spatial model recapitulating the tumour and stroma was engineered to show that without a relevant stromal population, tumour invasion is quantitatively decreased. Where a relevant stroma was engineered in dense collagen populated by gingival fibroblasts, enhanced receptor activator of nuclear factor kappa-B ligand (RANKL) expression was observed and histopathological properties, including ameloblastoma tumour islands, developed and were quantified. Using human osteoblasts (bone stroma) further enhanced the biomimicry of ameloblastoma histopathological phenotypes. This work demonstrates the importance of the two key stromal populations, osteoblasts, and gingival fibroblasts, for accurate 3D biomimetic ameloblastoma modelling.

Irinotecan (CTP-11) is one of the standard therapies for colorectal cancer (CRC). CTP-11 is enzymatically converted to the hydrophobic 7-ethyl-10-hydroxycamptothecin (SN38), a one hundred-fold more active metabolite. Conjugation of hydrophobic anticancer drugs to nanomaterials is a strategy to improve their solubility, efficacy, and selectivity. Carbon dots (CDs) have garnered interest for their small sizes (<10 ​nm), low toxicity, high water solubility, and bright fluorescence. This paper describes the use of CDs to improve drug vehiculation, stability, and chemotherapeutic efficiency of SN38 through a direct intracellular uptake in CRC. The covalent conjugation of SN38 to CDs via a carbamate bond provides a CD-SN38 hybrid material for slow, sustained, and pH-responsive drug release. CD-SN38 successfully penetrates the CRC cells with a release in the nucleus affecting first the cell cycle and then the cytoskeleton. Moreover, CD-SN38 leads to a deregulation of the extracellular matrix (ECM), one of the major components of the cancer niche considered a possible target therapy for reducing the cancer progression. This work shows the combined therapeutic and imaging potential of CD-based hybrid materials for the treatment of CRC. Future efforts for targeted therapy of chronic diseases characterized by altered ECM deposition, such as chronic kidney disease and chronic allograft nephropathy in kidney transplant patients are envisaged.

Biofilm at water-oil interface of hypoxic water columns of microcosms, prepared from a lacustrine sample, that used diesel as a carbon source was found to show electrogenic properties. These microcosms named, Liquid Microbial Fuel Cells (L-MFCs) were electrically characterized using a custom electronic analyzer; accurate determination of voltage (V), power density (W/m 2), and current density (A/m2) for both charge and discharge phases was carried out. The instrument made it possible to carry out cell characterizations using resistive loads between 0 Ω (Ohm) and 10 kΩ. During the hypoxic and electrogenic phase, the synthesis of a system of \"bacterial piping induction\", produced filaments of hundreds of micrometers in which the microbial cells are hosted. Ultrastructural microscopy collected by scanning (SEM), transmission (TEM), immunofluorescence, Thunder Imager 3D, confocal laser scanning (CLSM) microscopy revealed a \"myelin like\" structure during filamentation processes; this \"myelin like\" structure exhibited cross-reactivity towards different epitopes of the myelin basic protein (MBP) and Claudin 11 (O4) of human oligodendrocytes. The disclosure of these filamentation processes could be helpful to describe further unconventional microbial structures in aquatic ecosystems and of the animal world. The data that support the findings of this study are openly available in at https://data.mendeley.com/datasets/7d35tj3j96/1.

Anthocyanin-rich strawberry model solutions were co-pigmented with rooibos phenolics to enhance color and heat stability. The addition of green and fermented rooibos extracts at pigment-to-co-pigment molar ratios of 1:10, 1:50, and 1:100 pelargonidin-3-glucoside equivalents: orientin equivalents induced hyper- and bathochromic shifts at room temperature and during thermal processing at 80 °C for an hour. Co-pigmentation effects on hyperchromic shift were up to 96%, and bathochromic shift reached 19 nm when adding flavonoid-rich fractions of green rooibos phenolics. Following the co-pigmentation tests with rooibos extracts, selected pure phenolic co-pigments were tested for their monomeric contribution to the observed co-pigmentation effects. Orientin was identified as a potent co-pigment for pelargonidin-3-glucoside, showing stronger co-pigmentation effects than that of its aglycon luteolin. Additionally, orientin had the most pronounced bathochromic shift in heat-treated solutions. Rooibos extracts, particularly flavonoid-rich fractions composed of luteolin, apigenin, and quercetin glycosides, are suggested as color enhancers and stabilizers for strawberry products.