OBJECTIVE: The study aimed to assess the microleakage of nanoparticle-based (NPB) cyanoacrylate sealer and epoxy resin-based (ERB) sealer using radioisotope method and confocal laser scanning microscopy (CLSM).
METHODS: A total of 100 single-rooted teeth were collected; specimens were accessed, instrumented, and irrigated, and randomly distributed into 4 groups of 25 samples each: Group I: Positive control, group II: Negative control, group III: Obturated with NPB sealer, and group IV: Obturated with ERB sealer. All samples were immersed in 99mTc pertechnetate solution, for 3 hours after which radioactivity was estimated under a Gamma camera. The radioactivity released by specimens before and after nail varnish removal was statistically analyzed. After 2 weeks, the same samples were used for CLSM analysis. The sealer tubular penetration depth was measured at the deepest level for each group using ZEN lite 2012. Data collected was statistically evaluated.
RESULTS: The amount of radioactivity observed at first in group III and group IV was 194.76 and 599.12 units, respectively, with p-value < 0.001, indicating significant interaction, and after nail varnish removal, it was 89.68 and 468.44 units, respectively, with a p-value < 0.001; again, indicating statistical significance. Hence, the radioactivity of NPB sealer was found to be lower than ERB sealer in both cases, indicating better sealing of the former. The photomicrographs show that mean value of dye penetration in NPB sealer in first, second, and third segment from apex was 85.06, 75.73, and 66.09, respectively; while in the case of ERB sealer, those were 597.28, 461.17, and 195.68, respectively; with p-value < 0.001; signifying that NPB sealer exhibited higher resistance to microleakage than ERB sealer.
CONCLUSIONS: The NPB sealer can become a potential root canal sealer in future endodontics due to superior physiochemical properties attributed to the cyanoacrylate and incorporated nanoparticles.
CONCLUSIONS: The study clinically signifies that we can equally use the radioisotopic method along with confocal method while conducting the microleakage studies. In addition, NPB sealer can be an emerging replacement with better properties than gold standard root canal sealers for clinical use. How to cite this article: Shetty C, Qaiser S, Shetty A, et al. Evaluation of Microleakage of Nanoparticle-incorporated Cyanoacrylate Root Canal Sealer Using the Radioisotopic Method: An In Vitro Study. J Contemp Dent Pract 2024;25(4):335-341.

OBJECTIVE: This study aims to assess the synergistic effect of utilizing a bioceramic sealer, NeoPutty, with photobiomodulation (PBM) on dental pulp stem cells (DPSCs) for odontogenesis.
METHODS: Dental pulp stem cells were collected from 10 premolars extracted from healthy individuals. Dental pulp stem cells were characterized using an inverted-phase microscope to detect cell shape and flow cytometry to detect stem cell-specific surface antigens. Three experimental groups were examined: the NP group, the PBM group, and the combined NP and PBM group. A 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) experiment was conducted to assess the viability of DPSCs. The odontogenic differentiation potential was analyzed using Alizarin red staining, RT-qPCR analysis of odontogenic genes DMP-1, DSPP, and alkaline phosphatase (ALP), and western blot analysis for detecting BMP-2 and RUNX-2 protein expression. An analysis of variance (ANOVA) followed by a post hoc t-test was employed to examine and compare the mean values of the results.
RESULTS: The study showed a notable rise in cell viability when NP and PBM were used together. Odontogenic gene expression and the protein expression of BMP-2 and RUNX-2 were notably increased in the combined group. The combined effect of NeoPutty and PBM was significant in enhancing the odontogenic differentiation capability of DPSCs.
CONCLUSIONS: The synergistic effect of NeoPutty and PBM produced the most positive effect on the cytocompatibility and odontogenic differentiation potential of DPSCs.
CONCLUSIONS: Creating innovative regenerative treatments to efficiently and durably repair injured dental tissues. How to cite this article: Alshawkani HA, Mansy M, Al Ankily M, et al. Regenerative Potential of Dental Pulp Stem Cells in Response to a Bioceramic Dental Sealer and Photobiomodulation: An In Vitro Study. J Contemp Dent Pract 2024;25(4):313-319.

BACKGROUND: Gutta-percha (GP) combined with an endodontic sealer is still the core material most widely used for tridimensional obturation. The sealer acts as a bonding agent between the GP and the root dentinal walls. However, one of the main drawbacks of GP core material is the lack of adhesiveness to the sealer. ZnO thin films have many remarkable features due to their considerable bond strength, good optical quality, and excellent piezoelectric, antibacterial, and antifungal properties, offering many potential applications in various fields. This study aimed to explore the influence of GP surface\'s functionalization with a nanostructured ZnO thin film on its adhesiveness to endodontic sealers.
METHODS: Conventional GP samples were divided randomly into three groups: (a) Untreated GP (control); (b) GP treated with argon plasma (PT); (c) Functionalized GP (PT followed by ZnO thin film deposition). GP\'s surface functionalization encompassed a multi-step process. First, a low-pressure argon PT was applied to modify the GP surface, followed by a ZnO thin film deposition via magnetron sputtering. The surface morphology was assessed using SEM and water contact angle analysis. Further comprehensive testing included tensile bond strength assessment evaluating Endoresin and AH Plus Bioceramic sealers\' adhesion to GP. ANOVA procedures were used for data statistical analysis.
RESULTS: The ZnO thin film reproduced the underlying surface topography produced by PT. ZnO thin film deposition decreased the water contact angle compared to the control (p < 0.001). Endoresin showed a statistically higher mean bond strength value than AH Plus Bioceramic (p < 0.001). There was a statistically significant difference between the control and the ZnO-functionalized GP (p = 0.006), with the latter presenting the highest mean bond strength value.
CONCLUSIONS: The deposition of a nanostructured ZnO thin film on GP surface induced a shift towards hydrophilicity and an increased GP\'s adhesion to Endoresin and AH Bioceramic sealers.

This case presents clinical techniques and materials that may be applied in the management of internal tunnelling root resorption, a rare condition which has little published literature.A 25-year-old woman was referred to a specialist centre by her general dental practitioner following an incidental finding of a radiographic radiolucency, suggestive of root resorption associated with tooth 21. A provisional diagnosis of external cervical resorption was made, and following cone beam computed tomography (CBCT), a definitive diagnosis of internal tunnelling root resorption given. Non-surgical endodontic treatment was completed using continuous wave compaction with a calcium-silicate based sealer. No further intervention has been required.A summary of the histology, aetiology, prevalence, diagnosis, management and prognosis of internal tunnelling root resorption is provided. The benefits of CBCT for diagnosing and managing internal tunnelling resorption defects and using continuous wave compaction with a calcium-silicate based sealer, compared to cold obturation techniques, are discussed.

Background and Objectives: In teeth with open apices, performing single session apexification is a challenging treatment due to the difficulty in handling mineral trioxide aggregate (MTA). Minimally invasive approaches in dentistry have also influenced the cavity designs in endodontics. Until now, different techniques have not been investigated in addition to manual condensation during the process of placing MTA in traditional (TradACs) or conservative (ConsACs) endodontic access cavities. The aim of this in vitro study was to compare and evaluate the obturation quality of MTA apical plugs placed with different techniques in TradACs or ConsACs. Materials and Methods: Sixty upper central teeth were divided into two main groups based on cavity design, and then each main group was further divided into three subgroups according to MTA placement techniques (n = 10): TradAC-manual, TradAC-manual + indirect ultrasonic activation, TradAC-manual + XP-endo Shaper (XPS), ConsAC-manual, ConsAC-manual + indirect ultrasonic activation, and ConsAC-manual + XPS. Subsequently, the porosity percentages in the MTA apical plug were analyzed using micro-computed tomography. The statistical analysis was performed using the Kruskal-Wallis H test and Mann-Whitney U test. Statistical significance was set at p < 0.05. Results: There were differences in volume of porosity percentages (%) according to cavity designs and MTA application techniques (p < 0.05). Except for the XPS group, more porosity was observed in ConsACs compared to TradACs. In TradACs, the significantly lowest open and total porosity was observed in the manual, ultrasonic, and XPS techniques, respectively. In ConsACs, the significantly lowest porosity was observed in the manual, XPS, and ultrasonic techniques, respectively (p < 0.05). Conclusions: In MTA obturation, cavity designs and application techniques had an impact on the MTA porosity. Creating an apical plug in ConsACs may result in more porosity compared to TradACs, especially when manual or indirect ultrasonic activation is preferred. Opting for the manual technique alone may be considered sufficient for controlling porosity for both TradACs and ConsACs.

The remaining filling material after retreatment can harbor bacteria and organic tissues that can influence the outcome of the therapy.
OBJECTIVE: The aim of this study was to evalúate, by micro-CT, the amount of filling material remaining in the root canal after its removal using WaveOne Gold or ProDesign RT.
METHODS: Forty human mandibular canines were instrumented with the ProTaper Next system up to the X2 instrument (25.06) and filled with gutta-percha cones and AHPlus. Teeth were divided into 2 groups (n=20): WaveOne Gold 25.07 (WOG) and ProDesign RT 25.08 (PRT) for filling removal, after which they were scanned in a micro-CT device to quantify the volume of remaining filling material. The data were subjected to log 10 transformation, Student \'s t-test was performed to account for multiple observationsper sample, significance was set at 5%.
RESULTS: Student \'s t-test showed that there was no difference between the two systems regarding the volume of remaining filling material in the thirds: apical (p = 0.392), middle (p = 0.065), or cervical (p = 0.918).
UNASSIGNED: Remaining filling material was present in all groups and both systems were similar in removing root filling material in mandibular canines.
A permanencia de material obturador após o retratamento pode abrigar bactérias e tecidos orgánicos que podem influenciar o resultado da terapia.
OBJECTIVE: O objetivo deste estudo foi avaliar, por micro-CT, a quantidade de material obturador remanescente no canal radicular após a desobturagdo com WaveOne Gold e ProDesign RT.
UNASSIGNED: Quarenta caninos inferiores humanos foram instrumentados com o sistema ProTaper Next até o instrumento X2 (25.06) e obturados com cones de guta-percha e AHPlus. Os dentes foram divididos em dois grupos (n=20): WaveOne Gold 25.07 (WOG) e ProDesign RT 25.08 (PRT) e escaneados em micro-CT para quantificagdo do volume de material obturador remanescente. Os dados foram submetidos á transformando log 10, o teste t de Student foi realizado para contabilizar múltiplas observagoes por amostra, a significáncia foi fixada em 5%.
RESULTS: O teste t de Student mostrou que ndo houve diferenga no volume de material obturador remanescente entre os dois sistemas nos tergos: apical (p = 0,392), médio (p = 0,065) ou cervical (p = 0,918).
UNASSIGNED: O material obturador remanescente estavapresente em todos os grupos e ambos os sistemas foram semelhantes na remogdo do material obturador radicular nos caninos inferiores.

BACKGROUND: The study aims to compare the detection of the middle mesial canal (MMC) in mandibular molar teeth using cone beam computed tomography (CBCT) with different voxel sizes when the mesiobuccal (MB) and mesiolingual (ML) canals have three distinct phases (unpreparation, preparation and obturation and the removal of the obturation and repreparation).
METHODS: Two hundred forty-two extracted human mandibular molars were collected and kept in a physiological saline solution prior to use. 0.2-, 0.28- and 0.35-mm voxel sizes CBCT (n = 242) were performed in three phases (Ph): Ph1, no MB and ML canal preparation or obturation; Ph2, after MB and ML canals preparation and obturation; and Ph3, after the removal of the obturation of MB and ML canals and canals repreparation. Images were analyzed using OnDemand3D® software. After the CBCT acquisition in Ph3, all the samples were clarified to visualize the presence of the MMC directly. A blinded, previously calibrated examiner analyzed all the images.
RESULTS: The MMC was detected in 15 of the 242 teeth after the clearing technique. The lowest MMC detection rate was observed at 0.35-mm voxel size regardless of the ML and MB canal condition, while the highest was observed at 0.2-mm voxel size (P < 0.05). There is no statistically significant difference between 0.2-mm and 0.28-mm voxel sizes (P > 0.05). In all voxel sizes, the highest rate of detectability of the MMC was seen in Phase 1, while the lowest was in Phase 2.
CONCLUSIONS: It may be appropriate to take a 0.20-mm voxel size CBCT image, especially after the removal of root canal filling.
CONCLUSIONS: An appropriate CBCT voxel size and the absence of root canal filling in the root canal system help to detect the missing MMC.

The present study aimed to compare postoperative pain in teeth with symptomatic and asymptomatic apical periodontitis (AP) following a single-visit endodontic treatment using BioRoot™ RCS or AH Plus at 8 h, 24 h and 48 h postoperatively. Postgraduate students performed endodontic treatment on 101 teeth with AP, randomised into two obturation groups. A 100-mm Visual Analog Scale was used to document the intensity of pain at preoperative, 8-h, 24-h and 48-h intervals. The Kolmogorov-Smirnov test was used for normality, and the median and interquartile ranges were compared using the Mann-Whitney U test. Preoperative pain (1.90 ± 3.50) was more frequent in teeth with symptomatic AP (p < 0.05). However, no significant differences were observed in postoperative pain at the 8-h, 24-h and 48-h intervals. Pre and postoperative pain were directly associated (p < 0.05). Single-visit root canal treatment in teeth with AP using both sealers resulted in similar levels of postoperative pain.

To investigate the efficacy of 3 root canal sealants such as AH Plus, GuttaFlow and iRoot SP combined with warm gutta-percha vertical compression technique in the treatment of dental pulp disease. This was a single-center retrospective study. 180 patients with dental pulp disease were divided into AH Plus group (n = 60), GuttaFlow group (n = 60) and iRoot SP group (n = 60) according to the different treatment methods. Patients in different groups were treated with corresponding root canal sealant combined with warm gutta-percha vertical compression technique. The quality of root canal filling, filling time, filling area ratio, the incidence of pain after operation, serum interleukin-6 (IL-6) and tumor necrosis factor-α (TNF-α) and efficacy at 6 months after operation were compared among the 3 groups, respectively. The filling time in the GuttaFlow group and the iRoot SP group was significantly shorter than that in the AH Plus group (P < .001). There were significant differences in pain grade (P = .015) and pain rate (P = .016) among the 3 groups, and the pain rate in the GuttaFlow group and the iRoot SP group was significantly lower than that in the AH Plus group (P = .016). The time-point effect, intergroup effect and time-groups effect of serum TNF-α and IL-6 were significantly different (P < .001), and the levels of the 3 groups after treatment were significantly lower than those before treatment (P < .05), and the levels were significantly lower in the GuttaFlow group and the iRoot SP group (P < .05). There were significant differences in efficacy grading and effective rate among the 3 groups (P = .028), and the effective rate of iRoot SP group was significantly higher than that of AH Plus group (P < .05). The iRoot SP or GuttaFlow as root canal sealant combined with warm gutta-percha vertical compression technique in the treatment of dental pulp disease is better than AH Plus, and the former one can shorten the filling time, relieve the postoperative pain and improve the inflammatory response, but the long-term apical sealing effect of iRoot SP is better than GuttaFlow.

BACKGROUND: In this study, we aimed to compare the effectiveness of various chelating agents, ethilenediaminetetraacetic acid (EDTA), citric acid (CA), and etidronic acid (HEDP) mixed in two different forms, in removing the smear layer and promoting the penetration of an endodontic sealer into the dentinal tubules of extracted single-rooted teeth.
METHODS: The study used 75 teeth divided into five groups: 17% EDTA, 10% CA, 9% HEDP + NaOCl, 9% HEDP + distilled water (DW), and a control (DW) group. Scanning electron microscopy was used to assess smear layer removal and confocal laser microscopy was used to evaluate tubular sealer penetration at different depths from the apical tip.
RESULTS: Sealer penetration was highest with 17% EDTA and 10% CA as compared with the other agents (p<0.001). At the cervical third, the sealer penetration for EDTA, HEDP + NaOCl, and HEDP + DW groups were significantly different than those in DW (p = 0.020). For the middle third, EDTA, CA, and HEDP + NaOCl groups were significantly higher than those of the DW group (p<0.001). Cervical-level values were significantly higher than apical-level values for HEDP + NaOCl, HEDP + DW, and DW (p<0.001). Smear layer removal was lower with 9% HEDP + DW than with 17% EDTA and 10% CA at all depths (p<0.001). A significancy in smear layer removal was observed between 10% CA and control (p = 0.015) in middle depth.
CONCLUSIONS: Within the limitations of this study, highest values were seen in EDTA and CA in terms of sealer penetration and smear layer removal. In the light of these findings, the use of strong chelating agents highlights better clinical efficiency than dual-rinse or single HEDP irrigation.