The electrokinetic (EK) process has been proposed for soil decontamination from heavy metals and organic matter. The advantages of the EK process include the low operating energy, suitability for fine-grained soil decontamination, and no need for excavation. During the last three decades, enhanced and hybrid EK systems were developed and tested for improving the efficiency of contaminants removal from soils. Chemically enhanced-EK processes exhibited excellent efficiency in removing contaminants by controlling the soil pH or the chemical reaction of contaminants. EK hybrid systems were tested to overcome environmental hurdles or technical drawbacks of decontamination technologies. Hybridization of the EK process with phytoremediation, bioremediation, or reactive filter media (RFM) improved the remediation process performance by capturing contaminants or facilitating biological agents\' movement in the soil. Also, EK process coupling with solar energy was proposed to treat off-grid contaminated soils or reduce the EK energy requirements. This study reviews recent advancements in the enhancement and hybrid EK systems for soil remediation and the type of contaminants targeted by the process. The study also covered the impact of operating parameters, imperfect pollution separation, and differences in the physicochemical characteristics and microstructure of soil/sediment on the EK performance. Finally, a comparison between various remediation processes was presented to highlight the pros and cons of these technologies.

The electrokinetic process has been proposed for in-situ soil remediation to minimize excavation work and exposure to hazardous materials. The precipitation of heavy metals in alkaline pH near the cathode is still challenging. Reactive filter media and enhancement agents have been used in electrokinetics to enhance the removal of heavy metals. This study investigated coupling industrial iron slag waste and iron slag-activated carbon reactive filter media with electrokinetic for a single and mixture of heavy metals treatment. Instead of using acid enhancement agents, the anolyte solution was recycled to neutralize the alkaline front at the cathode, reducing the operation cost and chemical use. Experiments were conducted for 2 and 3 weeks at 20 mA electric current. Copper removal increased from 3.11 % to 23 % when iron slag reactive filter media was coupled with electrokinetic. Copper removal increased to 70.14 % in the electrokinetic experiment with iron slag-activated carbon reactive filter media. The copper removal increased to 89.21 % when the anolyte solution was recycled to the cathode compartment. Copper removal reached 93.45 % when the reactive filter media-electrokinetic process with anolyte recirculation was extended to 3 weeks. The reactive filter media- an electrokinetic process with anolyte recycling was evaluated for removing copper, nickel, and zinc mixture, and results revealed 81.1 % copper removal, 89.04 % nickel removal, and 92.31 % zinc removal in a 3-week experiment. The greater nickel and zinc removal is attributed to their higher solubility than copper. The results demonstrated the cost-effectiveness and efficiency of the electrokinetic with iron slag-activated carbon reactive filter media with anolyte recirculation for soil remediation from heavy metals.

Soil contamination is increasingly a global problem with serious implications for human health. Among different soil decontamination approaches, electrokinetic (EK) remediation is a relatively new technology for treating organic and inorganic contaminants in soil. This research aims to develop an enhanced EK treatment method incorporating a compost-based reactive filter media (RFM) with the advantages of low-cost and strong affinity for heavy metals and test and improve the treatment efficiency for multiple heavy metals in natural soil. A series of EK operations were performed to investigate the performance of EK-RFM under different operating conditions such as the electric current and voltage, processing time, and the amount of RFM. The electric current and treatment time demonstrated a significant positive impact on removing Zn, Cd and Mn ions while changing the amount of RFM had an insignificant impact on the efficiency of heavy metals removal. Overall, 51.6%-72.1% removal of Zn, Cd, and Mn was achieved at 30.00 mA of electric current and 14 days of treatment duration. The energy consumption of the EK process was 0.17 kWh kg-1. The soil organic matter adversely affected the mobilization and migration of heavy metals such as Cu and Pb during EK treatment. The results are valuable in optimizing the design of the EK-RFM system, which will extend its application to field-scale soil decontamination practices.

Electrokinetic (EK) remediation is a promising technology for soil decontamination, although basic pH in the soil close to cathode has constrained EK effectiveness due to heavy metal precipitation. This study aimed to enhance copper removal from kaolinite soil by integrating EK with compost (C) as recyclable reactive filter media (RFM) for the first time. Compost placed near the cathode served as an adsorbent to bind copper ions while buffering the advancement of the alkaline front in soil. The total copper removal rate increased from 1.03% in EK to 45.65% in EK-100%C under an electric potential of 10 V. Further experiments conducted by using biochar (BC) and compost/biochar (C + BC) mixture RFM at different ratios showed total Cu removal efficiency decreasing as EK-100%C > EK-(10%BC + 90%C) > EK-(20%BC + 80%C) > EK-(30%BC + 70%C) > EK. The application of a constant electric current of 20.00 mA further enhanced copper removal to 84.09% in EK-100%C although did not show significant enhancement in EK-(BC + C). The compost RFM was regenerated by acid extraction and then reused twice, achieving a total removal of 74.11%. The findings demonstrated compost as a promising and reusable RFM for the efficient removal of copper in contaminated soil.

Electrokinetic (EK) remediation has been used in the removal of metal ions from contaminated soil. This study focused on integrating the EK technique with different reactive filter media (RFM) of activated carbon (AC) and biochar (BC) for the first time without adding chemicals to facilitate the removal of copper ions from the contaminated kaolinite soil. Tests based on EK, EK coupled with AC (EK-AC), and EK combined with BC (EK-BC) were performed under an electric potential of 10 V, and the overall removal efficiency of copper ions decreased as EK-BC > EK-AC > EK. The results show that 27% of copper in the soil was captured by BC, compared with only 10% by AC. Additional EK-BC test performed under a constant current (20 mA) revealed that the acid front swept across the soil, resulting in 70.6-95.0% copper removal from soil sections 4 to 1 close to the anode region with more copper accumulation in section 5. Similar to the EK-BC test under a fixed voltage, 26% of copper in the soil was captured by BC during EK-BC treatment under a constant current although with a higher energy consumption. Moreover, RFM was regenerated by flushing with an acid solution, achieving 99.3% of copper recovery in BC and 78.4% in AC. Although the permeability of AC-RFM was higher than that of BC-RFM, copper contaminant was more easily leached out from the BC-RFM. The findings demonstrated the feasibility of contaminant entrapment in BC-RFM and recovery by acid leaching, with potential for sustainable soil remediation.

Sand and gravel are widely applied for filtering pre- or primary-treated wastewater in small-scale wastewater treatment (SWT) systems. However, ecological materials continue to attract increasing interest in use as retrofits for achieving better performance in removing dissolved contaminants and recovering nutrients from wastewater. In this study, we assessed the plant availability and leachability of phosphorus (P) from sand (Sa) and gas concrete (GC) media previously fortified with biochar (BC) and used for phosphorus (P) removal in laboratory-scale packed bed reactors and field-scale constructed filter beds. Batch and leaching experiments were conducted, with distilled water and ammonium lactate (AL) solutions (1:20 solid-liquid (w/v) ratio) applied as extractants. In the findings, reference (Sa) and fortified (Sa-BC) sand filters leached 11.2 and 20.5 mg P kg-1 respectively, to percolating water while the P seemed less likely to leach from GC systems. Extraction with AL showed that P retained in GC was plant-available and that GC could release up to 90 mg kg-1 of the bound mass. These findings highlight the need to evaluate risks of nutrient leaching from filter media for SWT systems especially where groundwater and surface water are final recipients of such effluents. For greater sustainability of use of the media, the weakly bound P in media such as Sa and BC and strongly bound in media such as GC types of materials may be recovered by recycling the spent material to agriculture. However, this may require re-design of the treatment system especially with respect to particle size to make recycling technically feasible.