The design and development of pharmaceutical products require specific knowledge, time, and investment. Response surface methodology (RSM) is a widely used technique in the design of experiments (DoE) to optimize various processes and products. The aim of this study was to model and produce experimental emulgels containing 1% ciclopirox olamine and to evaluate their physical, rheological, and mechanical properties and their ability to release ciclopirox olamine. The objective was to optimize the composition of the experimental emulgel containing 1% ciclopirox olamine by applying a central composite design based on selected criteria. The surfactant (polysorbate 80) had the greatest influence on the physical, rheological, and mechanical properties of the emulgels, as well as on the release of ciclopirox olamine from these systems. During the optimization process, an emulgel of optimal composition was generated containing 38.27% mineral oil, 6.56% polysorbate 80, and 55.17% hydrogel containing 1% ciclopirox olamine, meeting specified criteria (dependent variables) including the maximum flux of ciclopirox olamine, the minimum sol-gel transition temperature (Tsol/gel), and the minimum particle size of the oil phase. The oil phase particle size (D50) of this emulgel was determined to be 0.337 µm, the system Tsol/gel was 9.1 °C, and the flux of ciclopirox olamine from this gel matrix was calculated to be 1.44 mg/cm2. This emulgel of optimal composition could be used to treat fungal skin diseases.

This comprehensive review offers a chemical analysis of cutting fluids, delving into both their formulation and deformulation processes. The study covers a wide spectrum of cutting fluid formulations, ranging from simple compositions predominantly comprising oils, whether mineral or vegetable, to emulsions. The latter involves the integration of surfactants, encompassing both nonionic and anionic types, along with a diverse array of additives. Concerning oils, the current trend leans towards the use of vegetable oils instead of mineral oils for environmental reasons. As vegetable oils are more prone to oxidation, chemical alterations, the addition of antioxidant may be necessary. The chemical aspects of the different compounds are scrutinized, in order to understand the role of each component and its impact on the fluid\'s lubricating, cooling, anti-wear, and anti-corrosion properties. Furthermore, the review explores the deformulation methodologies employed to dissect cutting fluids. This process involves a two-step approach: separating the aqueous and organic phases of the emulsions by physical or chemical treatments, and subsequently conducting a detailed analysis of each to identify the compounds. Several analytical techniques, including spectrometric or chromatographic, can be employed simultaneously to reveal the chemical structures of samples. This review aims to contribute to the improvement of waste treatment stemming from cutting fluids. By gathering extensive information about the formulation, deformulation, and chemistry of the ingredients, there is a potential to enhance the waste management and disposal effectively.

BACKGROUND: Mineral oil aromatic hydrocarbon (MOAH) analysis in foods is a major analytical challenge. Quantification is associated with a high uncertainty. The sources of uncertainty are multiple, but the major one is related to data interpretation and integration, which is partially derived from insufficiently efficient sample preparation. Recently, an updated ISO method for the analysis of mineral oil in fats and oils and a standard operating procedure for infant formula analysis have been published. Both methods reported significantly different (up to 1.25) distributions of the internal standards used for quantification (i.e., tri-tert-butyl benzene (TBB) and 2-methyl naphthalene (2-MN)) over the different solvent phases used in the saponification step.
RESULTS: In this work, a microwave-assisted saponification and extraction method was optimized for MOAH analysis to solve the problem related to the MOAH internal standards partition. The paper examines the impact of the solvent mixture used, the concentration of KOH on the partition of TBB and 2-MN, and the effect of the matrix and the washing step to extract the unsaponifiable fraction containing the mineral oils.
CONCLUSIONS: The optimized procedure achieved a TBB/2-MN ratio of 1.05 ± 0.01 tested in five different fats and oils, namely, sunflower, rapeseed, coconut, palm, and extra virgin olive oils. The method can significantly contribute to reducing the uncertainty of the MOAH quantification when saponification is applied.

On-line coupled high performance liquid chromatography-gas chromatography-flame ionisation detection (HPLC-GC-FID) was used to compare the effect of hydrogen, helium and nitrogen as carrier gases on the chromatographic characteristics for the quantification of mineral oil hydrocarbon (MOH) traces in food related matrices. After optimisation of chromatographic parameters nitrogen carrier gas exhibited characteristics equivalent to hydrogen and helium regarding requirements set by current guidelines and standardisation such as linear range, quantification limit and carry over. Though nitrogen expectedly led to greater peak widths, all required separations of standard compounds were sufficient and humps of saturated mineral oil hydrocarbons (MOSH) and aromatic mineral oil hydrocarbons (MOAH) were appropriate to enable quantitation similar to situations where hydrogen or helium had been used. Slightly increased peak widths of individual hump components did not affect shapes and widths of the MOSH and MOAH humps were not significantly affected by the use of nitrogen as carrier gas. Notably, nitrogen carrier gas led to less solvent peak tailing and smaller baseline offset. Overall, nitrogen may be regarded as viable alternative to hydrogen or helium and may even extend the range of quantifiable compounds to highly volatile hydrocarbon eluting directly after the solvent peak.

Three-dimensionally printed parts are increasingly used in industry for quick repairs. They are often operated in the presence of grease, oil, and others. This article describes the effect of engine mineral oil on the fatigue life of 3D-printed FDM plastic samples. For this reason, this article aimed to investigate the influence of oil on the fatigue life of materials made using this technology. Samples made of ABA, ASA, PLA, and HIPS materials were printed with 100% fill. Divided into groups, they were stored for 15, 30, and 60 days in an oil bath at a room temperature of 23 °C and an increased temperature of 70 °C. To compare the effect of storage in oil, static tests were performed to determine the tensile strength of the specimens and to determine the load levels for the cyclic tests. Cyclic tests were performed to determine the effect of oil and temperature on the fatigue life. Internal structure studies of the specimens were performed using computed microtomography to determine the changes in the porosity of the specimens under the influence of oil. In the case of ABS, the oil-bathed samples showed a clear increase in the fatigue life, especially at 23 °C. For the ASA specimens, an increase was also evident, especially for the lower stress value. For HIPS and PLA, no clear effect of the oil bath on the fatigue life value of the samples was determined. Porosity studies using computed microtomography showed a clear decrease in the porosity of the samples as a result of the oil bath for all of them.

Onion thrips (Thrips tabaci) can pose a significant threat to onion crops, causing leaf damage, reduced bulb size and quality, and yield loss during severe infestations. Conventional insecticide use has been the primary method for managing this pest species, but the efficacy of this approach is inconsistent. Furthermore, emerging pest resistance is a growing concern in some regions. This two-year field study aimed to assess the effectiveness of several pest management strategies in controlling onion thrips populations and limiting their impact on onion yields. The strategies tested consisted of habitat manipulations (including flower strips and straw mulch), biological control agents (Stratiolaelaps scimitus, Neoseiulus cucumeris, Amblyseius swirskii, and Beauveria bassiana), as well as physical barrier control methods (exclusion nets, kaolin, and mineral oil). Habitat manipulation techniques, particularly the use of flower strips, reduced thrips populations by up to 50% and increased onion yields by 25%. In contrast, exclusion nets had a detrimental effect on onion yields, and the other alternative control methods produced results comparable to those obtained for untreated controls. When used alone, biological control agents were not effective at maintaining thrips populations below economically damaging levels. This study offers valuable insights into effective and sustainable pest management practices for the onion industry.

This study aims to optimize the matrix formulation for the hot-melt pressure-sensitive adhesive plaster of personalized traditional Chinese medicine(TCM) preparations and verify the applicability of the formulation. The central composite design in JMP Pro 16.1.0 was employed to optimize the dosages of styrene-isoprene-styrene triblock copolymer(SIS), hydrogenated petroleum resin, and lightweight liquid paraffin, with the fine powder of Yipifang as the model drug(drug loading of 10%) and the sensory score and objective evaluation as the comprehensive evaluation indicators. The quality evaluation system of hot-melt pressure-sensitive adhesive plaster of personalized TCM preparations was established. The applicability of the optimized matrix formulation of hot-melt pressure-sensitive adhesive plaster was verified with 16 TCM preparations for external application. Furthermore, the applicability of the matrix formulation was investigated with different drug loadings. The general molding matrix formulation was SIS∶hydrogenated petroleum resin∶lightweight liquid paraffin 3∶3∶5. The optimized matrix formulation showed good molding properties and high quality scores for 16 TCM preparations and were suitable for the plastering of finely powdered decoction pieces with a loading capacity of 10% to 30%. The results suggest that the optimized matrix formulation has good applicability and is suitable for TCM preparations. The findings lay a foundation for the application and promotion of the hot-melt pressure-sensitive adhesive plasters of personalized TCM preparations.

Scabies is considered an external parasite notorious for its high prevalence causing severe and contagious skin lesions in humans and animals worldwide. This study has introduced a medicine to treat dogs infested with scabies (variants of Demodex, Sarcoptes, Psoroptes, Otodectes, etc.). The present study offers a no-side-effect herbal formulation to treat dogs infested with scabies. Unlike oral and injectable medicines, which take the form of an ointment and are topically applied on-site, this medicinal formulation can be easily used without concerns over its side effects or consumption dosages. This medicinal formulation requires no skin rinsing due to its herbal and high skin absorption properties, as recovery may take less than a month with a maximum of two times of application. To carry out the experiment, 25 sick dogs with various breeds and ages suspected of scabies were gathered. Following accurate morphological examinations of all the samples, a deep skin chip of the lesion site was provided, which was examined by a microscope. Then, 13 dogs (Mix, Terrier, Pug, Husky, Spitz) were infested with Demodex scabies and 12 dogs (Pittbull, Mix, Shih Tzu, Terrier, Boxer, Setter) with Sarcoptic scabies. The prepared product was topically administered at a constant 2% dosage to the bodies of all the samples. To prepare the ointment, 1 g of Borax (Na2B4O7·10H2O) was first dissolved in 35 g deionized water and heated to 70°C. Then, 45 g of liquid paraffin (CnH2n+2) was mixed with 1 g of Carvacrol (C10H14O) and 1 g of geranium (C10H18O) and stirred well to become a phase. Later, 17 g of the melted beeswax (C15H31COOC30H61) was added to the liquid paraffin compound. In the end, the aqueous phase was added to the oil phase, and the mixture process immediately began in one direction with a glass stirrer and continued until the product cooled down. Essential oils (EO) was obtained by steam distillation of fresh Thyme and Rose-Acented Geranium in a stainless steel distillation apparatus (alembic) for 3 h. The main components of the essential oils used in the formulation were performed using a Hewlett-Packard GC system interfaced with a mass spectrometer equipped with an HP5-MS capillary column (30 m, 0.32 mm, 0.25 µm film thicknesses). For GC-MS detection, electron ionization with ionization energy of 70 eV was used. To examine the presence of scabies, weekly skin sampling was performed, and the treatment continued until 30 days, when no skin chip of the scabies was noted. The findings revealed that the formulation developed no side effects and removed the daily use, as it could be administered once or twice a week. Also, complete recovery of scabies in all the breeds was found to be less than a month at most. This medicinal formulationcan be easily used without concerns over its side effects or consumption dosages. This study introduced a herbal formulation with effective herbal ingredients without any side effects to treat the sarcoptes and demodex parasites; unlike other chemical compounds, this medicinal formulation has no side effects, while some other formulations could develop side effects.

Selection of adjuvant to be combined with the antigen is an extremely important point for formulating effective vaccines. The aim of this study was to evaluate reactogenicity, levels of IgM, IgG and subclasses (IgG1, IgG2b and IgG3), and protection elicited by vaccine formulations with association of chitosan coated alginate or Montanide ISA 61 with γ-irradiated Brucella ovis. The alginate/chitosan biopolymers as well as the Montanide ISA 61 emulsion elicited intense and long-lasting local response, especially when associated with the antigen. However, Montanide ISA 61 induced less intense reactogenicity when compared to alginate/chitosan. Furthermore, γ-irradiated B. ovis with Montanide ISA 61 induced higher levels of IgG2b an important marker of cellular immune response. In conclusion, Montanide ISA 61 resulted in milder reactogenicity when compared to the alginate/chitosan, while it induced a high IgG2b/IgG1 ratio compatible with a Th1 profile response.

BACKGROUND: This case report describes a case of exogenous lipoid pneumonia (ELP) resulting from the inhalation of a lipoid substance. Lipoid pneumonia, also known as cholesterol pneumonia or golden pneumonia, is an uncommon inflammatory lung disease characterized by the presence of lipid-laden macrophages in the alveolar walls and lung interstitial tissue. Exogenous lipoid pneumonia occurs when substances containing lipids enter the airways through aspiration or inhalation, triggering an inflammatory response.
METHODS: The patient in this case study was an 83-year-old woman with hypertension and diabetes mellitus who had been using paraffin oil as a mouthwash for an extended period. The diagnosis of exogenous lipoid pneumonia was established based on the patient\'s history of exposure to liquid paraffin oil, typical radiological findings, and histopathological examination.