Acute myocardial infarction (AMI) has become a public health disease threatening public life safety due to its high mortality. The lateral-flow assay (LFA) of a typical cardiac biomarker, troponin I (cTnI), is essential for the timely warnings of AMI. However, it is a challenge to achieve an ultra-fast and highly-sensitive assay for cTnI (hs-cTnI) using current LFA, due to the limited performance of chromatographic membranes. Here, we propose a barbed arrow-like structure membrane (BAS Mem), which enables the unidirectional, fast flow and low-residual of liquid. The liquid is rectified through the forces generated by the sidewalls of the barbed arrow-like grooves. The rectification coefficient of liquid flow on BAS Mem is 14.5 (highest to date). Using BAS Mem to replace the conventional chromatographic membrane, we prepare batches of lateral-flow strips and achieve LFA of cTnI within 240 s, with a limit of detection of 1.97 ng mL-1. The lateral-flow strips exhibit a specificity of 100%, a sensitivity of 93.3% in detecting 25 samples of suspected AMI patients. The lateral-flow strips show great performance in providing reliable results for clinical diagnosis, with the potential to provide early warnings for AMI.

UNASSIGNED: Salidroside (SAL) is the most effective component of Rhodiola rosea, a traditional Chinese medicine. Cryptotanshinone (CT) is the main fat-soluble extract of Salvia miltiorrhiza, exhibiting considerable potential for application in osteogenesis. Herein, a polycaprolactone/gelatin nanofiber membrane loaded with CT and SAL (PSGC membrane) was successfully fabricated via coaxial electrospinning and characterized.
UNASSIGNED: This membrane capable of sustained and controlled drug release was employed in this study. Co-culturing the membrane with bone marrow mesenchymal stem cells and human umbilical vein endothelial cells revealed excellent biocompatibility and demonstrated osteogenic and angiogenic capabilities. Furthermore, drug release from the PSGC membrane activated the Wnt/β-catenin signaling pathway and promoted osteogenic differentiation and vascularization. Evaluation of the membrane\'s vascularization and osteogenic capacities involved transplantation onto a rat\'s subcutaneous area and assessing rat cranium defects for bone regeneration, respectively. Microcomputed tomography, histological tests, immunohistochemistry, and immunofluorescence staining confirmed the membrane\'s outstanding angiogenic capacity two weeks post-operation, with a higher incidence of osteogenesis observed in rat cranial defects eight weeks post-surgery.
UNASSIGNED: Overall, the SAL- and CT-loaded coaxial electrospun nanofiber membrane synergistically enhances bone repair and regeneration.

The anaerobic membrane bioreactor (AnMBR) is a promising technology for not only water reclamation but also virus removal; however, the virus removal efficiency of AnMBR has not been fully investigated. Additionally, the removal efficiency estimation requires datasets of virus concentration in influent and effluent, but its monitoring is not easy to perform for practical operation because the virus quantification process is generally time-consuming and requires specialized equipment and trained personnel. Therefore, in this study, we aimed to identify the key, monitorable variables in AnMBR and establish the data-driven models using the selected variables to predict virus removal efficiency. We monitored operational and environmental conditions of AnMBR in Sendai, Japan and measured virus concentration once a week for six months. Spearman\'s rank correlation analysis revealed that the pH values of influent and mixed liquor suspended solids (MLSS) were strongly correlated with the log reduction value of pepper mild mottle virus, indicating that electrostatic interactions played a dominant role in AnMBR virus removal. Among the candidate models, the random forest model using selected variables including influent and MLSS pH outperformed the others. This study has demonstrated the potential of AnMBR as a viable option for municipal wastewater reclamation with high microbial safety.

High-temperature polymer-electrolyte membrane fuel cells (HT-PEMFCs) are a very important type of fuel cells since they operate at 150-200 °C, making it possible to use hydrogen contaminated with CO. However, the need to improve the stability and other properties of gas-diffusion electrodes still impedes their distribution. Self-supporting anodes based on carbon nanofibers (CNF) are prepared using the electrospinning method from a polyacrylonitrile solution containing zirconium salt, followed by pyrolysis. After the deposition of Pt nanoparticles on the CNF surface, the composite anodes are obtained. A new self-phosphorylating polybenzimidazole of the 6F family is applied to the Pt/CNF surface to improve the triple-phase boundary, gas transport, and proton conductivity of the anode. This polymer coating ensures a continuous interface between the anode and proton-conducting membrane. The polymer is investigated using CO2 adsorption, TGA, DTA, FTIR, GPC, and gas permeability measurements. The anodes are studied using SEM, HAADF STEM, and CV. The operation of the membrane-electrode assembly in the H2/air HT-PEMFC shows that the application of the new PBI of the 6F family with good gas permeability as a coating for the CNF anodes results in an enhancement of HT-PEMFC performance, reaching 500 mW/cm2 at 1.3 A/cm2 (at 180 °C), compared with the previously studied PBI-O-PhT-P polymer.

Although conventional nanofiltration (NF) membrane is widely applied in water treatment, it faces the challenges of insufficient selectivity toward emerging contaminants, low permeability and non-sustainable fouling control. Herein, a novel electroactive metal-organic frameworks/carbon nanotubes membrane was constructed by facile and green nanobubbles-mediated non-solvent-induced phase separation (NIPS) strategy for ultrafast antibiotics removal. It presented 3-fold to 100-fold higher permeability (101.3-105.7 L·h-1·m-2·bar-1) without compromising rejection (71.8 %-99.3 %) of common antibiotics (tetracycline, norfloxacin, sulfamethoxazole, sulfamethazine) than most commercial and state-of-the-art NF membranes. The separation mechanism was due to the synergy of loose selective layer with three-dimensional interconnected networks and UiO-66/CNTs with unique pore sieving and charge property. It also presented excellent antibiotics selectivity with high NaCl/tetracycline separation factor of 194 and CuCl2/tetracycline separation factor of 316 for remediation of antibiotics and heavy metal combined pollution. Meanwhile, it possessed efficient anti-fouling, antibacterial and electro-driven self-cleaning ability, which enabled sustainable fouling control and disinfection with short process, low energy and chemical consumption. Furthermore, potential application of UiO-66/CNTs membrane in wastewater reclamation was demonstrated by stable antibiotics rejection, efficient flux recovery and long-term stability over 260 h. This study would provide useful insights into removal of emerging contaminants from water by advanced NF membrane.

Membrane bioreactors (MBRs) are well-established and widely utilized technologies with substantial large-scale plants around the world for municipal and industrial wastewater treatment. Despite their widespread adoption, membrane fouling presents a significant impediment to the broader application of MBRs, necessitating ongoing research and development of effective antifouling strategies. As highly promising, efficient, and environmentally friendly chemical methods for water and wastewater treatment, advanced oxidation processes (AOPs) have demonstrated exceptional competence in the degradation of pollutants and inactivation of bacteria in aqueous environments, exhibiting considerable potential in controlling membrane fouling in MBRs through direct membrane foulant removal (MFR) and indirect mixed-liquor improvement (MLI). Recent proliferation of research on AOPs-based antifouling technologies has catalyzed revolutionary advancements in traditional antifouling methods in MBRs, shedding new light on antifouling mechanisms. To keep pace with the rapid evolution of MBRs, there is an urgent need for a comprehensive summary and discussion of the antifouling advances of AOPs in MBRs, particularly with a focus on understanding the realizing pathways of MFR and MLI. In this critical review, we emphasize the superiority and feasibility of implementing AOPs-based antifouling technologies in MBRs. Moreover, we systematically overview antifouling mechanisms and strategies, such as membrane modification and cleaning for MFR, as well as pretreatment and in-situ treatment for MLI, based on specific AOPs including electrochemical oxidation, photocatalysis, Fenton, and ozonation. Furthermore, we provide recommendations for selecting antifouling strategies (MFR or MLI) in MBRs, along with proposed regulatory measures for specific AOPs-based technologies according to the operational conditions and energy consumption of MBRs. Finally, we highlight future research prospects rooted in the existing application challenges of AOPs in MBRs, including low antifouling efficiency, elevated additional costs, production of metal sludge, and potential damage to polymeric membranes. The fundamental insights presented in this review aim to elevate research interest and ignite innovative thinking regarding the design, improvement, and deployment of AOPs-based antifouling approaches in MBRs, thereby advancing the extensive utilization of membrane-separation technology in the field of wastewater treatment.

Nanofiltration (NF) is a promising technology in the treatment of microelectronic wastewater. However, the treatment of concentrate derived from NF system remains a substantial technical challenge, impeding the achievement of the zero liquid discharge (ZLD) goal in microelectronic wastewater industries. Herein, a ZLD system, coupling a two-stage NF technology with anaerobic biotechnology was proposed for the treatment of tetramethylammonium hydroxide (TMAH)-contained microelectronic wastewater. The two-stage NF system exhibited favorable efficacy in the removal of conductivity (96 %), total organic carbon (TOC, 90 %), and TMAH (96 %) from microelectronic wastewater. The membrane fouling of this system was dominated by organic fouling, with the second stage NF membrane experiencing a more serious fouling compared to the first stage membrane. The anaerobic biotechnology achieved a near-complete removal of TMAH and an 80 % reduction in TOC for the first stage NF concentrate. Methyloversatilis was the key genus involved in the anaerobic treatment of the microelectronic wastewater concentrate. Specific genes, including dmd-tmd, mtbA, mttB and mttC were identified as significant players in mediating the dehydrogenase and methyl transfer pathways during the process of TMAH biodegradation. This study highlights the potential of anaerobic biodegradation to achieve ZLD in the treatment of TMAH-contained microelectronic wastewater by NF system.

Nanofiltration (NF) has been proven to be with great potential for the separation of morpholines with molecular weight less than 200 Da in refining reverse osmosis concentrate (ROC), but its application is significantly restricted by the membrane fouling, which can reduce the rejection and service time. To enable the long-term operation stability of nanofiltration, this work focuses on the fouling behavior of each substance in the hydrosaline organic solution on nanofiltration membrane, aiming to give insight into the fouling mechanism. To this end, in this work, the effects of salts (i.e NaCl and Na2SO4), organic substances (including N-(2-hydroxypropyl)morpholine(NMH) and 4-morpholineacetate(MHA)) and representative divalent ions (Ca2+ and Mg2+) on the performance and physicochemical properties of DK membrane were systematically investigated. The results show that both salts and organics can induce DK membrane swelling, leading to an increase of the mean effective pore size. After the filtration of Na2SO4-NaCl-H2O, the mean pore size increased by 0.002 nm, resulting in the decrease of the removal ratio of NMH and MHA for 3.82% and 13.10%, respectively. With static adsorption of NMH and MHA, the mean pore size of DK membrane increased by 0.005 and 0.003 nm. The swelling slowed the entrance of more organic molecules into membrane pores. Among them, MHA led to the terrible irreversible pore blocking. As the concentration of Ca2+ increased, gypsum scaling was formed on the membrane surface. During this process, NMH and MHA played different roles, i.e. NMH accelerated the CaSO4 crystallization while MHA inhibited. As a conclusion, the fouling behavior of substances in the high saline organic wastewater on DK membrane were systematically revealed with the fouling mechanisms proposed, which could provide an insightful guidance for membrane fouling control and cleaning in the treatment of high salinity and organic wastewater.

This study examines the impact of incorporating a mobile bed into a membrane bioreactor (MBR) system on the treatment efficiency of dairy industry effluents. Initially, a conventional MBR system was operated for 60 days, followed by a modification that included a support material and ran for another 60 days under identical conditions. Performance was evaluated based on the removal efficiencies for soluble chemical oxygen demand (CODs), phenolic compounds, and oils and greases (OG), alongside measurements of solid content, dissolved oxygen, temperature, mixed liquor pH, and transmembrane pressure (TMP). The introduction of the mobile bed led to an increase in removal efficiencies for COD and phenolic compounds from 94.4 and 92.7% to 98 and 94.4%, respectively, marking statistically significant improvements (p < 0.05), while OG removal remained the same in both strategies (87.7%) (p > 0.05). Moreover, the modified system showed a more stable TMP profile, reducing the need for cleaning interventions compared to the conventional system, which experienced a notable TMP increase requiring cleaning at a 0.6 bar threshold. The findings suggest that integrating a mobile bed into MBR systems significantly enhances the treatment of dairy effluents, presenting an interesting solution for the upgrade of this type of system.

This paper centers on the preparation and characterization of both a clay support and a faujasite zeolite membrane. Additionally, the study explores the development of bacterial media to assess the performance of these prepared membranes. The faujasite zeolite membrane was created using the hydrothermal method, involving the deposition of a faujasite layer to fine-tune the pore sizes of the clay support. The clay supports were crafted from clay which was sieved to particle size Φ ≤ 63 μm, and compacted with 3.0 wt.% activated carbon, then sintered at 1,000 °C. Distilled water fluxes revealed a decrease from 1,500 L m-2 h-1 to a minimum of 412 L m-2 h-1 after 180 min of filtration. Both membranes were characterized by XRF, XRD, FTIR, adsorption-desorption of nitrogen (N2), and SEM-EDS. PCR technique was used for the identification of the isolated Arthrobacter sp., and the retention of the bacteria on the clay support and the faujasite zeolite membrane were found to be 96 and 99%, respectively. The results showed that the faujasite zeolite membrane passed the clay support due to a narrow pore size of the faujasite zeolite membrane of 2.28 nm compared to 3.55 nm for the clay supports.