This study investigated the gelling properties, rheological behaviour, and microstructure of heat-induced, low-salt myofibrillar protein (MP) gels containing different levels (2%, 4%, 6%, and 8%, w/w) of cross-linked (CTS) or acetylated (ATS) tapioca starch. The results indicated that either CTS or ATS significantly enhanced the gel strength and water-holding capacity of low-salt MP gels (P < 0.05), an outcome verified by the rheological behaviour test results under different modes. Furthermore, iodine-staining images indicated that the MP-dominated continuous phase gradually transited to a starch-dominated phase with increasing CTS or ATS levels, and 4% was the critical point for this phase transition. In addition, hydrophobic interactions and disulphide bonds constituted the major intermolecular forces of low-salt MP gels, effectively promoting phase transition. In brief, modified tapioca starches possess considerable potential application value in low-salt meat products.

The pectin was extracted using H2SO4, HNO3, and HCl from the pulp of four coffee varieties (Harar, Sidama, Jimma, and Guji) collected from different regions of Ethiopia. The effect of extraction temperature, time, solid-to-liquid ratio, types of acid and coffee varieties on the physiochemical properties and yield of pectin were studied. A maximum pectin yield, which was 12.7 %, was obtained from Harar coffee pulp treated with H2SO4. The equivalent weight of the extracted pectin varied from 1111 to 1667 g/mol. The methoxyl contents of the extracted pectin ranged from 4.23 to 7.13 %. The degrees of esterification and anhydrouronic acid of the pectin ranged from 53 to 68.5 % and 35.5 to 68.8 %, respectively. The results show the yield and physiochemical properties of the coffee pulp pectin depend on extraction parameters, acid types, and coffee varieties. Moreover, the pectin extracted from coffee pulp showed strong gelling properties.

Myofibrillar proteins (MPs) have a notable impact on the firmness and flexibility of gel-based products. Therefore, enhancing the gelation and emulsification properties of scallop MPs is of paramount significance for producing high-quality scallop surimi products. In this study, we investigated the effects of high-intensity ultrasound on the physicochemical and gelation properties of MPs from bay scallops (Argopecten irradians). The carbonyl content of MPs significantly increased with an increase in ultrasound power (150, 350, and 550 W), indicating ultrasound-induced MP oxidation. Meanwhile, high-intensity ultrasound treatment (550 W) enhanced the emulsifying capacity and the short-term stability of MPs (up to 72.05 m2/g and 153.05 min, respectively). As the ultrasound power increased, the disulfide bond content and surface hydrophobicity of MPs exhibited a notable increase, indicating conformational changes in MPs. Moreover, in the secondary structure of MPs, the α-helix content significantly decreased, whereas the β-sheet content increased, thereby suggesting the ultrasound-induced stretching and flexibility of MP molecules. Sodium-dodecyl sulfate-polyacrylamide gel electrophoresis and scanning electron microscopy analysis further elucidated that high-intensity ultrasound induced MP oxidation, leading to modification of amino acid side chains, intra- and intermolecular cross-linking, and MP aggregation. Consequently, high-intensity ultrasound treatment was found to augment the viscoelasticity, gel strength, and water-holding capacity of MP gels, because ultrasound treatment facilitated the formation of a stable network structure in protein gels. Thus, this study offers theoretical insights into the functional modification of bay scallop MPs and the processing of its surimi products.

Ulvan, a sulfated polysaccharide extracted from Ulva spp., has garnered significant attention in the food and pharmaceutical industries due to its potential health benefits. These include immunomodulation, antiviral, anti-inflammatory, anti-hyperlipidemic, and anti-cancer effects. Nonetheless, practical applications in these fields remain limited due to an incomplete understanding of its gelation mechanisms. Additionally, the underlying mechanisms of its gelation have not been completely understood and thoroughly reviewed. The primary objective is to provide current insights into ulvan\'s gelling mechanisms and potential health impacts. This review also delves into the existing applications of ulvan polysaccharides. By unraveling these aspects, the information provided in this work is expected to deepen our understanding of ulvan\'s gelation mechanisms and its prospective role in enhancing health, holding promise for advancements in the fields of food science and disease prevention. This work\'s theoretical insights contribute significantly to a deeper understanding of these aspects, which holds paramount importance in unleashing the full potential of ulvan and elevating its scientific significance.

This study investigated the effect of ultrasound (US) combined with pre- and post-addition of κ-carrageenan (KC) on the gelling properties, structural characteristics and rheological behavior of myofibrillar proteins (MP) under low-salt conditions. The results showed that US combined with either pre- or post-addition of KC rendered higher gel strength and water holding capacity (WHC) of MP gels than those treated with US alone and added with KC alone (P < 0.05). US combined with pre-addition of KC facilitated the binding between MP and KC, which enhanced the gel strength and WHC of the mixed MP gels and significantly improved the rheological behavior of MP. This was also confirmed by the highest surface hydrophobicity, disulfide bonds and β-sheet content of the MP gels with US combined with pre-addition of KC. Moreover, microstructural results reflected a denser structure for the pre-addition of KC in combination with US. However, US combined with post-addition of KC resulted in limited MP unfolding and relatively weak hydrophobic interactions in the composite gels, which were less effective in improving the gel properties of the MP gels. This study provides potential strategies for enhancing the gelling properties of low-salt meat products via application of US and KC.

Knowledge regarding the denaturation process and control methods for depolymerized sol-state myofibrillar proteins (MPs) during freezing remains scant. This study investigated the effects of protein cross-linking treatment before freezing on physicochemical and subsequent gelation properties of MPs sol subjected to freeze-thaw (F-T) cycles. Results indicated that after five F-T cycles, cross-linked MPs sols showed increased high molecular weight polymers and bound water (T21a and T21b) mobility, suggesting enhanced protein-protein interactions at the expense of protein-water interactions. Upon heating after F-T cycles, gels formed from cross-linked sols exhibited significantly higher hardness, springiness, and cooking loss (P < 0.05), alongside more contracted gel networks. Correlation analysis revealed that the formation and properties of thermal gel after freezing closely relate to changes in molecular conformation and chemical bonds of cross-linked MPs sol during freezing. This study provides new insights into regulating the freezing stability and post-thawed thermal processing properties of sol-based surimi products.

Frozen surimi quality generally correlates with oxidation, but impacts of protein oxidation on salt-dissolved myofibrillar protein (MP) sol in surimi remain unclear. Hence, physicochemical and gelling properties of MP sol with different oxidation degrees were investigated subjected to freeze-thaw cycles. Results showed that mild oxidation (≤1 mmol/L) improved unfrozen MP gel quality with lowest cooking loss (3.29 %) and highest hardness (829.76 N). Whereas, oxidized sol suffering freeze-thawing degenerated severely, showing reduction of 23.85 % of salt soluble protein contents with H2O2 concentrations of 10 mmol/L. Shearing before heating influenced gelling properties of freeze-thawed sol, depending on oxidation levels. Oxidized gel with shearing displayed disorganized network structures, whereas gel without shearing displayed relatively complete appearances without holes under high oxidation condition (10 mmol/L). Overall, freeze-thaw process aggravated denaturation extents of MP sol subjected to oxidation, further causing high water loss and yellow color of heat-induced gel, especially to gel with shearing.

This study investigated impact of high-density lipoprotein (HDL) on thermal aggregation and gelling behavior of myosin in relation to varied pHs. Results revealed that HDL modified myosin structure before and after heating, with distinct effects observed at varied pH. Under pH 5.0, both myosin and HDL-MS exhibited larger aggregates and altered microstructure; at pH 7.0 and 9.0, HDL inhibited myosin aggregation, resulting in enhanced solubility, reduced turbidity and particle size. Comparative analysis of surface hydrophobicity, free sulfhydryl groups and secondary structure highlighted distinct thermal aggregation behavior between MS and HDL-MS, with the latter showing inhibitory effects under neutral or alkaline conditions. Gelation behavior was enhanced at pH 7.0 with maximum strength, hardness, water-holding capacity and rheological properties. Under acidic pH, excessive protein aggregation resulted in increased whiteness and rough microstructure with granular aggregates. Under alkaline pH, gel network structure was weaker, possibly due to higher thermal stability of protein molecules. Scanning electron microscopy revealed expanded HDL protein particles at pH 7.0, accounting for decreased gel strength and altered rheological properties compared with myosin gel. Overall, the results indicated a positive role of HDL at varied pH in regulating thermal aggregation of myosin and further impacting heat-induced gel characteristics.

This study investigated the effects of ultrasound-assisted phosphorylation on gelling properties of fish gelatin (FG). Ultrasound-assisted phosphorylation (UP) for 60, 90, and 120 min resulted in >6.54% increase of phosphorylation degree and decreased zeta potential of FG. Atomic force microscopy revealed that UP-FGs showed larger aggregates than P-FGs (normal phosphorylation FGs). Low frequent-NMR and microstructure analysis revealed that phosphorylation enhanced water-binding capability of FG and improved the gel networks. However, UP60 had the highest gel strength (340 g), gelling (17.96 °C) and melting (26.54 °C) temperature while UP90 and UP120 showed slightly lower of them. FTIR analysis indicated thatβ-sheet and triple helix content increased but random coil content decreased in phosphorylated FGs. Mass spectrometry demonstrated phosphate groups mainly bound to serine, threonine and tyrosine residues of FG and UP-FG exhibited more phosphorylation sites. The study showed that mild phosphorylation (UP60) could be applied to improve FG gel properties.

The purpose of the present study was to investigate the gelling properties and in vitro digestibility of myofibrillar protein (MP) gels under low-salt condition as mediated by different concentrations of thermo-reversible curdlan gels (TRC) or thermo-irreversible curdlan gels (TIRC). The results showed that the incorporation of TRC or TIRC obviously improved the gel strength and water holding capacity of MP gels (P < 0.05). Those properties were most improved by adding 0.3 % TRC or TIRC with gel strength of 0.18 N or 0.17 N and WHC of 54.85 % or 49.05 %. Meanwhile, both TRC and TIRC promoted the transformation of α-helix into β-sheet, as well as hydrophobic interactions and disulfide bonds, which are the main forces for the maintenance of the MP gels. The microstructure revealed that the formation of dense and uniform protein network structures can be promoted by the addition of TRC or TIRC. The different modes of interaction between TRC or TIRC and MP resulted in different microstructures of the MP gels. Furthermore, incorporation of TRC or TIRC significantly reduced in vitro protein digestibility, especially for the 0.3 % (w/w) form (P < 0.05). Meanwhile, MP gels had the lowest in vitro protein digestibility after the addition of TRC (66.67 %) compared to the form of TIRC (70.93 %). Therefore, our present study indicated that incorporation form of TRC or TIRC have distinct implications on regulating the gelling properties and in vitro digestibility of MP gels under low-salt condition.