OBJECTIVE: The disinfection efficiency of disinfectants differs in specific conditions. This study aimed to investigate the disinfection efficiency of commercial hydrogen peroxide, chlorine dioxide, and chlorine disinfectant on real field surfaces and provide data for precise disinfection.
METHODS: Simulated field disinfection and field disinfection methods were conducted to quantitatively evaluate the disinfection efficiency of hydrogen peroxide, chlorine dioxide, and sodium dichloroisocyanurate. The log10 reduction of biological indicators, Escherichia coli (ATCC 8099) and Staphylococcus aureus (ATCC 6538), was calculated. Next, the reduction in natural bacteria on the surfaces of a food production and processing workshop and a biosafety laboratory was determined.
RESULTS: The 3 commercial disinfectants evaluated were effective against E coli and S aureus, with a reduction of more than 3.00 log10 colony-forming units/mL tested for an exposure time of 15 minutes with 3.5% hydrogen peroxide, 100 mg/L chlorine dioxide, and 250 mg/L sodium dichloroisocyanurate. The natural load in the food production and processing workshop decreased by more than 90% using 10.5% hydrogen peroxide with an exposure time of 30 minutes. The same disinfection level in the biosafety level 2 laboratory was achieved by 500 mg/L chlorine dioxide at an exposure time of 60 minutes and 450 mg/L sodium dichloroisocyanurate at 60 minutes.
CONCLUSIONS: This study provides a reference for precise disinfection of surfaces in the food industry and biosafety laboratories.

The increase in vegetable consumption has underlined the importance of minimizing the risks associated with microbiological contamination of fresh produce. The critical stage of the vegetable washing process has proven to be a key point for cross-contamination and the persistence of pathogens. In this context, the agri-food industry has widely adopted the use of disinfectants to reduce the bacterial load in the wash water. Therefore, we conducted laboratory-scale experiments in order to demonstrate the antimicrobial activity of disinfectants used in the wash tank of agro-food industries. Different wash water matrices of shredded lettuce, shredded cabbage, diced onion, and baby spinach were treated with sodium hypochlorite (NaClO), chlorine dioxide (ClO2), and per-oxyacetic acid (PAA) at recommended concentrations. To simulate the presence of pathogenic bacteria, a cocktail of E. coli O157:H7 was inoculated into the process water samples (PWW) to determine whether concentrations of disinfectants inhibit the pathogen or bring it to a viable non-culturable state (VBNC). Hereby, we used quantitative qPCR combined with different photo-reactive dyes such as ethidium monoazide (EMA) and propidium monoazide (PMA). The results indicated that concentrations superior to 20 ppm NaClO inhibit the pathogen E. coli O157:H7 artificially inoculated in the process water. Concentrations between 10-20 ppm ClO2 fail to induce the pathogen to the VBNC state. At concentrations of 80 ppm PAA, levels of culturable bacteria and VBNC of E. coli O157:H7 were detected in all PWWs regardless of the matrix. Subsequently, this indicates that the recommended concentrations of ClO2 and PAA for use in the fresh produce industry wash tank do not inhibit the levels of E. coli O157:H7 present in the wash water.

This prospective work focuses on the use of two different gaseous oxidants (chlorine dioxide and ozone) to remediate soil polluted with methomyl in two different applications: ex-situ and in-situ. In the first, the soil washing is integrated with the bubbling of the oxidant, while in the second, the gas was introduced by a perforated pipe located sub-superficially. Regarding the soil washing treatment, results demonstrate that direct use of ozone is not very efficient, although an important improvement is obtained following activation with hydrogen peroxide or UV light. In contrast, chlorine dioxide exhibited complete methomyl depletion from the soil, although with higher energy consumption and technical complexity compared to ozone. The direct dosing of the gaseous oxidants in perforated pipes is effective, achieving methomyl removals of 7.8 % and 9.2 % using ozone and chlorine dioxide, respectively. In these cases, soil conditions are not significantly modified, which becomes an important advantage of the technology as compared with other electrochemically assisted soil remediation process, in which large regions of the treated soil are affected by important changes in the pH or by depletion of ions. This lower impact makes these novel technologies more promising for further evaluations.

Disinfection efficiency and disinfection byproduct (DBP) formation are two important aspects deserving careful consideration when evaluating different disinfection protocols. However, most of the previous studies on the selection of disinfection methods by comparing DBP formation were carried out under the same initial/residual dose and contact time of different disinfectants, and such a practice may cause overdose or underdose of a certain disinfectant, leading to the inaccurate evaluation of disinfection. In this study, a comprehensive and quantitative comparison of chlorine (Cl2) and chlorine dioxide (ClO2) disinfection was conducted with regard to their DBP formation under equal disinfection efficiency. The microbial inactivation models as well as the Cl2 and ClO2 demand models were developed. On such basis, the integral CT (ICT) values were determined and used as a bridge to connect disinfection efficiency and DBP formation. For 3-log10 and 4-log10 reductions of Pseudomonas aeruginosa, ClO2 had 1.5 and 5.8 times higher inactivation ability than Cl2, respectively. In the premise of equal disinfection efficiency (i.e., the ICT ratios of Cl2 to ClO2 = 1.5 and 5.8), the levels of total organic chlorine, total organic bromine, and total organic halogen formed in the Cl2 disinfection were significantly higher than those formed in the ClO2 disinfection. Among the 35 target aliphatic DBPs, trihalomethanes (THMs) and haloacetic acids (HAAs) were the dominant species formed in both Cl2 and ClO2 disinfection. The total THM levels formed in Cl2 disinfection were 14.6 and 30.3 times higher than those in ClO2 disinfection, respectively. The total HAA levels formed in Cl2 disinfection were 3.5 and 5.4 times higher than those in ClO2 disinfection, respectively. Formation of the target 48 aromatic DBPs was much favored in Cl2 disinfection than that in ClO2 disinfection, and the formation levels was dominated by contact time. This study demonstrated that ClO2 had significant advantages over Cl2, especially at higher microorganism inactivation and lower DBP formation requirements.

BACKGROUND: Ensuring the safety of dental unit waterlines (DUWLs) has become a pivotal issue in dental care practices, focusing on the health implications for both patients and healthcare providers. The inherent structure and usage conditions of DUWLs contribute to the risk of biofilm formation and bacterial growth, highlighting the need for effective disinfection solutions.The quest for a disinfection method that is both safe for clinical use and effective against pathogens such as Staphylococcus aureus and Escherichia coli in DUWLs underscores the urgency of this research.
METHODS: Chlorine dioxide disinfectants at concentrations of 5, 20, and 80 mg/L were used to treat biofilms of S. aureus and E. coli cultured in DUWLs. The disinfection effectiveness was assessed through bacterial counts and culturing. Simultaneously, human skin fibroblast cells were treated with the disinfectant to observe changes in cell morphology and cytotoxicity. Additionally, the study included corrosion tests on various metals (carbon steel, brass, stainless steel, aluminum, etc.).
RESULTS: Experimental results showed that chlorine dioxide disinfectants at concentrations of 20 mg/L and 80 mg/L significantly reduced the bacterial count of S. aureus and E. coli, indicating effective disinfection. In terms of cytotoxicity, higher concentrations were more harmful to cellular safety, but even at 80 mg/L, the cytotoxicity of chlorine dioxide remained within controllable limits. Corrosion tests revealed that chlorine dioxide disinfectants had a certain corrosive effect on carbon steel and brass, and the degree of corrosion increased with the concentration of the disinfectant.
CONCLUSIONS: After thorough research, we recommend using chlorine dioxide disinfectant at a concentration of 20 mg/L for significantly reducing bacterial biofilms in dental unit waterlines (DUWLs). This concentration also ensures satisfactory cell safety and metal corrosion resistance.

Owing to their lack of outer skin, Chinese bayberries are highly susceptible to mechanical damage during picking, which accelerates bacterial invasion and rotting, shortening their shelf life. In this study, montmorillonite (MMT) was used to absorb an aqueous sodium chlorite solution embedded in a carboxymethyl cellulose sodium hydrogel after freeze drying, and the hydrogel was crosslinked by Al3+ ions. Al3+ hydrolyzed to produce H+, creating an acidic environment within the hydrogel and reacting with NaClO2 to slowly release ClO2. We prepared a ClO2 slow-release hydrogel gasket with 0.5 wt% MMT-NaClO2 and investigated its storage effect on postharvest Chinese bayberries. Its inhibition rates against Escherichia coli and Listeria monocytogenes were 98.84% and 98.96%, respectively. The results showed that the gasket preserved the appearance and nutritional properties of the berries. The antibacterial hydrogel reduced hardness loss by 26.57% and ascorbic acid loss by 46.36%. This new storage method could also be applicable to other fruits and vegetables.

Global ornamental fish transportation ranging from hours to days can produce multiple stress factors impact fish health and cause mortality. Clownfish, particularly Amphiprion ocellaris, are among the most traded saltwater ornamental fish. Vibrio includes several pathogenic strains that affect aquatic animals. Consequently, prophylactic treatment of the water or fish is recommended. In this study, six Vibrio strains including V. alginolyticus, V. parahaemolyticus and V. harveyi isolated from sick A. ocellaris and one V. harveyi strain from a sick East Asian fourfinger threadfin (Eleutheronema rhadinum) were tested for their sensitivity to a popular disinfectant, chlorine dioxide (ClO2). The results showed that 0.25 ppm ClO2 effectively suppressed five of the seven tested Vibrio strains for 24 h; however, 0.1 ppm ClO2 is safer for A. ocellaris. Meanwhile, ClO2 2.5 ppm reduced the bacterial counts to below 3.3 × 105 CFU/mL for 24 hours. The LC50 of ClO2 for A. ocellaris was 0.87 ppm at 10 min and 0.72 ppm at 24 h post treatment. Mild changes in water quality, including dissolved oxygen (DO), temperature and pH, were recorded during the trial. More research is necessary to understand the sensitivity of various aquatic animal pathogens to ClO2 and its toxicity to different aquatic animals.

[This corrects the article DOI: 10.3389/fpls.2022.887179.].

Aerosols carrying viruses that are released from the oral cavity of infected individuals are the primary, if not the only, means of transmission during viral respiratory disease epidemics. This makes crowded rooms and tiny, enclosed public areas like bathrooms prime environments for the transmission of diseases. Volatile organic compounds (VOCs) and formaldehyde are two contaminants that pose serious threats to human health and well-being in indoor environments. The varied disinfectant properties of chlorine dioxide (ClO2) make it a key player in treating a range of air quality issues. To balance effectiveness and safety, however, the careful application of chlorine dioxide is essential to achieving the best results in air quality while preserving human health and well-being. This study explores the many functions of chlorine dioxide, including the prevention of the spread of viruses, the elimination of harmful gases like ammonia and hydrogen sulfide, and its effects on formaldehyde and total volatile organic compounds (TVOCs) in indoor environments using BT100. The results indicate a reduction of 98.5%, 81.01%, 62.22%, 46.5%, and 63.84% in minimizing aerosolized viruses, ammonia, and hydrogen sulfide gas in addition to formaldehyde and total volatile organic compounds.

N-phenyl-N\'-(1,3-dimethyl butyl)-p-phenylenediamine-quinone (6PPDQ) currently arouses broad concerns because of its acute lethality to coho salmon and rainbow trout at environmentally relevant concentrations and the wide occurrence in runoff-impacted water. Investigation on the fate and transformation of 6PPDQ in various treatment processes is necessary for its risk assessment and control. Here, we explored the transformation of 6PPDQ during disinfection with its precursor 6PPD as a reference, focusing on kinetics, products, and toxicity variation. 6PPDQ readily reacted with hypochlorite and chlorine dioxide with second-order rate constants of 2580 ± 143 M-1 s-1 and 614 ± 52 M-1 s-1 (pH 7.0 and 25 °C), which are slightly lower than the reactions of 6PPD. We tentatively identified thirteen transformation products for 6PPDQ and eight for 6PPD in reaction with the two disinfectants. It seems that the quinone ring of 6PPDQ and the p-phenylenediamine moiety of 6PPD are reactive sites. The transformation of these compounds probably proceeds through Cl-substitution, ring cleavage, hydroxylation, and amine oxidation and hydrolysis. Tests with zebrafish embryos revealed that the transformation products of 6PPDQ could have higher eco-toxicity than the parent compound, while the toxicity of the 6PPD products remained nearly unchanged. The increased toxicity of 6PPDQ during disinfection highlights the necessity to substantially reduce its content before the disinfection of runoff-impacted water.