Animal-derived foods (ADFs) are a very varied group of foods, but many are nutrient rich and contain higher quality protein than provided by plant-derived foods such that a simple replacement of ADF protein is likely to lead to a reduction in overall protein quality. In addition, many ADFs are richer in some nutrients than plant-based foods (e.g. Fe, Ca) and these often have a higher bioavailability. ADFs also provide nutrients that plants cannot supply (e.g. vitamin B12) and some provide beneficial health functionality (e.g. hypotensive) which is not explained by traditional nutrition. However, there remains a good health reason to increase the proportion of plant-derived food in many diets to increase the intake of dietary fibre which is often consumed at very sub-optimal levels. It seems logical that the increased plant-derived foods should replace the ADFs that have the least benefit, the greatest risk to health and the highest environmental impact. Processed meat fits these characteristics and should be an initial target for replacement with plant-based based protein-rich foods that additionally provide the necessary nutrients and have high-quality dietary fibre. Processed meat covers a wide range of products including several traditional foods (e.g. sausages) which will make decisions on food replacement challenging. There is therefore an urgent need for research to better define the relative health risks associated with the range of processed meat-based foods. The aim of this review is to examine the evidence on the benefits and risks of this dietary transition including the absolute necessity to consider initial nutrient status before the replacement of ADFs is considered.

Bone formation is tightly modulated by genetically encoded molecular proteins that interact to regulate cellular differentiation and secretion of bony matrix. Many transcription factors are known to coordinate these events by controlling gene transcription within networks. However, not all factors involved are known. Here, we identified a novel function for Zinc Finger Homeobox 3 (Zfhx3), a gene encoding a transcription factor, as a regulator of bone metabolism. We knocked out Zfhx3 conditionally in mice in either chondrocytes or osteoblasts and characterized their bones by micro-CT in 12-week-old mice. We observed a negative effect in linear bone growth in both knockout mice but reduced bone mass only in mice with Zfhx3 deleted in osteoblasts. Loss of Zfhx3 expression in osteoblasts affected trabecular bone mass in femurs and vertebrae in both sexes but influenced cortical bone volume fraction only in females. Moreover, transcriptional analysis of femoral bones in osteoblast Zfhx3 conditional knockout mice revealed a reduced expression of osteoblast genes, and histological evaluation of trabecular bones suggests that Zfhx3 causes changes in bone formation and not resorption. The loss of Zfhx3 causes reductions in trabecular bone area and osteoid volume, but no changes in the expression of osteoclast differentiation markers or number of TRAP stained osteoclasts. These studies introduce Zfhx3 as a relevant factor toward understanding gene regulatory networks that control bone formation and development of peak bone mass.

Lithium is considered to be the most effective mood stabilizer for bipolar disorder. Evolving evidence suggested lithium can also regulate bone metabolism which may reduce the risk of fractures. While there are concerns about fractures for antipsychotics and mood stabilizing antiepileptics, very little is known about the overall risk of fractures associated with specific treatments. This study aimed to compare the risk of fractures in patients with bipolar disorder prescribed lithium, antipsychotics or mood stabilizing antiepileptics (valproate, lamotrigine, carbamazepine). Among 40,697 patients with bipolar disorder from 1993 to 2019 identified from a primary care electronic health record database in the UK, 13,385 were new users of mood stabilizing agents (lithium:2339; non-lithium: 11,046). Lithium was associated with a lower risk of fractures compared with non-lithium treatments (HR 0.66, 95 % CI 0.44-0.98). The results were similar when comparing lithium with prolactin raising and sparing antipsychotics, and individual antiepileptics. Lithium use may lower fracture risk, a benefit that is particularly relevant for patients with serious mental illness who are more prone to falls due to their behaviors. Our findings could help inform better treatment decisions for bipolar disorder, and lithium\'s potential to prevent fractures should be considered for patients at high risk of fractures.

BACKGROUND: With the progressive increase in aging populations, the use of opportunistic computed tomography (CT) scanning is increasing, which could be a valuable method for acquiring information on both muscles and bones of aging populations.
OBJECTIVE: The aim of this study was to develop and externally validate opportunistic CT-based fracture prediction models by using images of vertebral bones and paravertebral muscles.
METHODS: The models were developed based on a retrospective longitudinal cohort study of 1214 patients with abdominal CT images between 2010 and 2019. The models were externally validated in 495 patients. The primary outcome of this study was defined as the predictive accuracy for identifying vertebral fracture events within a 5-year follow-up. The image models were developed using an attention convolutional neural network-recurrent neural network model from images of the vertebral bone and paravertebral muscles.
RESULTS: The mean ages of the patients in the development and validation sets were 73 years and 68 years, and 69.1% (839/1214) and 78.8% (390/495) of them were females, respectively. The areas under the receiver operator curve (AUROCs) for predicting vertebral fractures were superior in images of the vertebral bone and paravertebral muscles than those in the bone-only images in the external validation cohort (0.827, 95% CI 0.821-0.833 vs 0.815, 95% CI 0.806-0.824, respectively; P<.001). The AUROCs of these image models were higher than those of the fracture risk assessment models (0.810 for major osteoporotic risk, 0.780 for hip fracture risk). For the clinical model using age, sex, BMI, use of steroids, smoking, possible secondary osteoporosis, type 2 diabetes mellitus, HIV, hepatitis C, and renal failure, the AUROC value in the external validation cohort was 0.749 (95% CI 0.736-0.762), which was lower than that of the image model using vertebral bones and muscles (P<.001).
CONCLUSIONS: The model using the images of the vertebral bone and paravertebral muscle showed better performance than that using the images of the bone-only or clinical variables. Opportunistic CT screening may contribute to identifying patients with a high fracture risk in the future.

UNASSIGNED: Chicken bones, a by-product of the poultry industry, can directly or indirectly enter the food chain. Bone meal and bone products could be sources of many contaminants. Considering the wide range of uses made of bones in the culinary and food industries, this material needs to be safe and antibiotic residue-free. To determine if such is the case, the concentration of doxycycline in chicken bones was investigated, this antimicrobial being one of the most commonly used in poultry production.
UNASSIGNED: Ross 308 broilers were grouped into three experimental and one control group. Doxycycline was administered in drinking water at therapeutic and sub-therapeutic doses, as well as via spray treatment. The concentration of doxycycline in bones was determined post slaughter by ultra-high performance liquid chromatography-tandem mass spectrometry.
UNASSIGNED: Doxycycline was quantified at 135 μg/kg 22 days after the last day of antibiotic administration at therapeutic doses; 2,285 μg/kg after sub-therapeutic treatment for 27 days and 9.62 μg/kg 22 days after the end of spray application.
UNASSIGNED: High concentrations and long persistence of doxycycline in bones were found in this study. Doxycycline can contaminate all bone-derived products in the food and fertiliser industries.

Millions of children and adults worldwide suffer from undiagnosed and untreated celiac disease (CeD). The clinical picture of CeD is highly heterogeneous and comprises manifestations that can affect almost the whole body. This narrative overview is aimed at characterizing diseases and complaints that are associated with unrecognized CeD and that frequently involve sites other than the gastrointestinal (G.I.) tract, i.e., dental, otorhinolaryngological, and ocular complications; skin and hair abnormalities; afflictions of the bones, joints, and muscles; cardiovascular affectations; kidney diseases; neuro-psychiatric disorders; and gynecological-obstetrical manifestations. The association between CeD and extra-GI manifestations is frequently overlooked, which leads to a delay in diagnosis. Most CeD-mediated disorders can be treated with a strict gluten-free diet (GFD), but some of them are irreversible unless CeD is diagnosed in time. Some manifestations can be classified as risk factors for CeD, and CeD screening tests for affected patients should be selectively considered. Apart from gastroenterologists, specialists in other medical disciplines can play an important role in identifying people with unrecognized CeD and may help prevent its progress and long-term complications. Further comprehensive investigations are necessary to clarify the pathogenesis of extra-GI manifestations and the effect of a GFD.

Bones and teeth represent a common finding in ancient DNA studies and in forensic casework, even after a long burial. Genetic typing is the gold standard for the personal identification of skeletal remains, but there are two main factors involved in the successful DNA typing of such samples: (1) the set-up of an efficient DNA extraction method; (2) the identification of the most suitable skeletal element for the downstream genetic analyses. In this paper, a protocol based on the processing of 0.5 g of bone powder decalcified using Na2EDTA proved to be suitable for a semi-automated DNA extraction workflow using the Maxwell® FSC DNA IQ™ Casework Kit (Promega, Madison, WI, USA). The performance of this method in terms of DNA recovery and quality was compared with a full demineralisation extraction protocol based on Qiagen technology and kits. No statistically significant differences were scored according to the DNA recovery and DNA degradation index (p-values ≥ 0.176; r ≥ 0.907). This new DNA extraction protocol was applied to 88 bone samples (41 femurs, 19 petrous bones, 12 metacarpals and 16 molars) allegedly belonging to 27 World War II Italian soldiers found in a mass grave on the isle of Cres (Croatia). The results of the qPCR performed by the Quantifiler Human DNA Quantification kit showed values above the lowest Limit of Quantification (lLOQ; 23 pg/µL) for all petrous bones, whereas other bone types showed, in most cases, lower amounts of DNA. Replicate STR-CE analyses showed successful typing (that is, >12 markers) in all tests on the petrous bones, followed by the metacarpals (83.3%), femurs (52.2%) and teeth (20.0%). Full profiles (22/22 autosomal markers) were achieved mainly in the petrous bones (84.2%), followed by the metacarpals (41.7%). Stochastic amplification artefacts such as drop-outs or drop-ins occurred with a frequency of 1.9% in the petrous bones, whereas they were higher when the DNA recovered from other bone elements was amplified (up to 13.9% in the femurs). Overall, the results of this study confirm that petrous bone outperforms other bone elements in terms of the quantity and quality of the recovered DNA; for this reason, if available, it should always be preferred for genetic testing. In addition, our results highlight the need for accurate planning of the DVI operation, which should be carried out by a multi-disciplinary team, and the tricky issue of identifying other suitable skeletal elements for genetic testing. Overall, the results presented in this paper support the need to adopt preanalytical strategies positively related to the successful genetic testing of aged skeletal remains in order to reduce costs and the time of analysis.

UNASSIGNED: Despite the groundbreaking research by Judet and Letournel in the 1960s, the specific equipment, surgical approach, fixation strategy, and post-operative course for treating acetabular fractures have not been standardized. Therefore, this study aimed to compare technological resources, operative procedures, and post-operative complications between patients treated for acetabular fractures in Romania and the United States (U.S.).
UNASSIGNED: Between February 2011 and August 2018, a total of 116 Romanian patients and 373 U.S. patients underwent open reduction and internal fixation for acetabular fractures. Data were collected prospectively for Romania and retrospectively for the U.S. The authors used T-tests, Fisher\'s exact tests, and odds ratios to analyze categorical data while ordinal date were assessed using logistic regression.
UNASSIGNED: U.S. patients had higher comorbidity rates for diabetes, obesity, and hypertension. However, the initial quality of reduction, graded with Matta\'s criteria, was similar between American and Romanian patients. Post-operatively, U.S. patients had significantly higher Brooker criteria scores for heterotopic ossification. Rates of deep vein thrombosis, infections, sciatic nerve lesions, and loss of reduction between the two countries were not significantly different.
UNASSIGNED: Given the similar initial reduction quality despite technological differences, the authors suggest that fundamental factors, such as surgeon training and experience, may have a greater impact than the availability of technologically advanced operative resources. Future research focusing on the efficacy of these advanced resources for acetabular fracture fixation could help determine their true impact on patient outcomes and improve the cost-effectiveness of this surgery.

UNASSIGNED: Clinically recognizing the changes in carpal bone volumes and understanding their implications in predicting osteoarthritis (OA) is crucial in clinical practice This study aimed to explore age-related differences in carpal bone volumes across genders, leveraging computed tomography (CT) wrist scans to create 3D surface models of these bones.
UNASSIGNED: Carpal bone volumes were calculated using the 3D Slicer software from CT scans obtained from Frankston Hospital and additional datasets from Brown and Auckland Universities. The data were statistically processed using Stata V13. Double-sided P-values < .05 were considered statistically significant. The study was conducted in accordance with the ethical standards laid out in the Declaration of Helsinki.
UNASSIGNED: A total of 181 patients were analyzed, and 48% of whom were female. A statistically significant positive Spearman correlation (rho = 0.37-0.611, P <.05) was observed between increasing age and the volume of all surveyed carpal bones (scaphoid, lunate, triquetrum, pisiform, hamate, capitate, and trapezium) across genders. Intrauser and interuser reliabilities for 3D Slicer-generated volumes of trapezium and pisiform bones were statistically significant, with Interclass Correlation Coefficient (ICC) values of 0.86 and 0.95, respectively.
UNASSIGNED: Trapezial volumes increase with age, potentially due to the presence of OA and consequent osteophyte formation. This pattern is more prevalent among older individuals and women. However, the positive correlation between carpal bone volume and age was consistent across all carpal bones and both genders, regardless of OA presence. These findings suggest that carpal bone volume may naturally increase with age, independent of OA-related changes.
UNASSIGNED: III, cohort study.

The oldest extant anatomy textbooks compiled in ancient Rome were by Galen who described in writing most of the various parts and organs of the body. History tells us that ever since the time of Galen, anatomical terminology would be a necessary and beneficial feature, but it also brought unexpected and annoying consequences into the field. The benefits are readily apparent in the case of muscle terminology. Galen identified more than 150 different kinds of skeletal muscles, most of which were unnamed, hence difficult to identify without professional knowledge of anatomy. Vesalius introduced detailed anatomical illustrations in Fabrica (1543), which made the identification of the muscles easier. Bauhin then introduced proper descriptive names for the muscles in Theatrum anatomicum (1605), which enabled the identification of the muscles without illustrations. After the terminology became complex and diverse, a logically consistent standard nomenclature was established by Nomina anatomica (1895). The unexpected consequences may be found in the terminology of bones and joints. Galen gave 39 proper names for individual bones, and classified and termed the types of bony joints. Many of these terms have survived in modern anatomy as literal translations of the bone terms, as well as the joint terms. The annoying consequences may be found in the terminology of intestines. Galen divided the small and large intestines into three portions, such that the major part of the small intestine suspended by the mesentery was divided into two without sufficient reason. The Latin translations of jejunum and ileum were, respectively assigned to them by Mondino in his Anatomia written in 1316.