Dynamic in vitro absorption systems and mechanistic absorption modeling via PBPK have both shown promise in predicting human oral absorption, although these efforts have been largely separate; this work aimed to integrate knowledge from these approaches to investigate the oral absorption of a RET inhibitor, pralsetinib, with BCS Class II properties. Tiny-TIM (TIM B.V., Weteringbrug​, The Netherlands) is a dynamic in vitro model with close simulation of the successive physiological conditions of the human stomach and small intestine. Tiny-TIM runs with pralsetinib were performed at doses of 200 mg and 400 mg under fasting conditions. Mechanistic modeling of absorption was performed in Simcyp V21 (Certara, Manchester, UK). Pralsetinib fasted bioaccessibility in the Tiny-TIM system was 63% at 200 mg and 53% at 400 mg; a 16% reduction at 400 mg was observed under elevated gastric pH. Maximum pralsetinib solubility from the small intestinal compartment in Tiny-TIM directly informed the supersaturation/precipitation model parameters. The PBPK model predicted a similar fraction absorbed at 200 mg and 400 mg, consistent with the dose proportional increases in observed pralsetinib exposure. Integrating dynamic in vitro systems with mechanistic absorption modeling provides a promising approach for understanding and predicting human absorption with challenging low solubility compounds.

We extended a mechanistic, physics-based framework of the dry down process, previously developed for liquids and electrolytes, to solids and coded it into the latest UB/UC/P&G skin permeation model, herein renamed DigiSkin. The framework accounts for the phase change of the permeant from dissolved in a solvent (liquid) to precipitated on the skin surface (solid). The evaporation rate for the solid is reduced due to lower vapor pressure for the solid state versus subcooled liquid. These vapor pressures may differ by two orders of magnitude. The solid may gradually redissolve and penetrate the skin. The framework was tested by simulating the in vitro human skin permeation of the 38 cosmetically relevant solid compounds reported by Hewitt et al., J. Appl. Toxicol. 2019, 1-13. The more detailed handling of the evaporation process greatly improved DigiSkin evaporation predictions (r2 = 0.89). Further, we developed a model reliability prediction score classification using diverse protein reactivity data and identified that 15 of 38 compounds are out of model scope. Dermal delivery predictions for the remaining chemicals have excellent agreement with experimental data. The analysis highlighted the sensitivity of water solubility and equilibrium vapor pressure values on the DigiSkin predictions outcomes influencing agreement with the experimental observations.

A new regression model is presented which offers flexibility, freedom from subjective determinations of linear range, and very wide applicability to measurement systems of industrial importance. This \"progressive decay\" model starts as a deceptively simple ordinary differential equation. We show here that its solution faithfully describes real but seemingly unconnected data from a plate-based assay for quantitation of RNA with RiboGreen® and dissolution data for a triple fixed-dose combination solid oral dosage form.

Covalent organic framework (COF) aerogels with functional groups offer exceptional processability and functionality for various applications. These hierarchical porous materials combine the advantages of COFs with the benefits of aerogels, overcoming the limitations of conventional insoluble and nonfusible COF powders. However, achieving both high crystallinity and shape retention remains a challenge for functionalized COF aerogels. In this work, we develop a novel and general solvent substitution method for the one-step synthesis of formyl-functionalized COF aerogels without harsh vacuum conditions. These aerogels exhibit excellent processing capabilities, superior mechanical strength, and enhanced functionality. As a proof-of-concept, they were used in adsorption and lithium metal battery applications, significantly maximizing the structural advantages of COFs, e.g.: (i) the hierarchical porous structure is fully wetted by the electrolyte to form continuous transport channels; (ii) the polar groups, which are easier to be acquired, help in desolvation and transfer of Li+; (iii) the regular pore structures stabilize deposition of Li+ and inhibit the growth of lithium dendrites. These combined benefits contribute to a lighter battery with improved energy density and enhanced safety.

Methyl mercaptan is a typical volatile organosulfur pollutant contained in many gases emitted by urban waste treatment, various industries, natural gas handling, refining processes, and energy production. This work is a comprehensive overview of the scientific and practical aspects related to the management of methyl mercaptan pollution. The main techniques, including absorption, adsorption, oxidation, and biological treatments, are examined in detail. For each method, its capability as well as the technical advantages and drawbacks have been highlighted. The emerging methods developed for the removal of methyl mercaptan from natural gas are also reviewed. These methods are based on the catalytic conversion of CH3SH to hydrocarbons and H2S.

[This corrects the article DOI: 10.3389/fphar.2018.00249.].

Quercetin and its glycosides (QG), vitally natural flavonoid, have been popular for health benefits. However, the absorption and metabolism affect their bioavailability, and the metabolic transformation alters their biological activities. This review systematically summarizes the bioavailability and pathways for the absorption and metabolism of quercetin/QG in vivo and in vitro, the biological activities and mechanism of quercetin/QG and their metabolites in treating glucolipid metabolism are discussed. After oral administration, quercetin/QG are mainly absorbed by the intestine, undergo phase II metabolism in the small intestine and liver to form conjugates and are metabolized into small phenolic acids by intestinal microbiota. Quercetin/QG and their metabolites exert beneficial effects on regulating glucolipid metabolism disorders, including improving insulin resistance, inhibiting lipogenesis, enhancing thermogenesis, modulating intestinal microbiota, relieving oxidative stress, and attenuating inflammation. This review enhances understanding of the mechanism of quercetin/QG regulate glucolipid metabolism and provides scientific support for the development of functional foods.

Following up on the first PBPK model for an oral vaccine built for alpha-tocopherol, three peptides are explored in this article to verify if they could support an oral vaccine formulation as adjuvants using the same PBPK modeling approach. A literature review was conducted to verify what peptides have been used as adjuvants in the last decades, and it was noticed that MDP derivatives have been used, with one of them even being commercially approved and used as an adjuvant when administered intravenously in oncology. The aim of this study was to build optimized models for three MDP peptides (MDP itself, MTP-PE, and murabutide) and to verify if they could act as adjuvants for an oral vaccine. Challenges faced by peptides in an oral delivery system are taken into consideration, and improvements to the formulations to achieve better results are described in a step-wise approach to reach the most-optimized model. Once simulations are performed, results are compared to determine what would be the best peptide to support as an oral adjuvant. According to our results, MTP-PE, the currently approved and commercialized peptide, could have potential to be incorporated into an oral formulation. It would be interesting to proceed with further in vivo experiments to determine the behavior of this peptide when administered orally with a proper formulation to overcome the challenges of oral delivery systems.

This study presents the design, preparation, and characterization of thirty new medium-entropy alloys (MEAs) in three systems: Al-Ti-Nb-Zr, Al-Ti-Nb-V, and Al-Ti-Nb-Hf. The hardness of the alloys ranged from 320 to 800 HV0.3. Among the alloys studied, Al15Ti40Nb30Zr15 exhibited the highest-reversible hydrogen storage capacity (1.03 wt.%), with an H/M value of 0.68, comparable to LaNi5, but with a reduced density (5.11 g·cm-3) and without rare earth elements. This study further reveals a strong correlation between hardness and hydrogen absorption/desorption; higher hardness is responsible for reduced hydrogen uptake. This finding highlights the interplay between a material\'s properties and hydrogen storage behavior in MEAs, and has implications for the development of efficient hydrogen storage materials.

Whispering-gallery-mode (WGM) resonators are powerful instruments for single-molecule sensing in biological and biochemical investigations. WGM sensors leveraged by plasmonic nanostructures, known as optoplasmonic sensors, provide sensitivity down to single atomic ions. In this article, we describe that the response of optoplasmonic sensors upon the attachment of single protein molecules strongly depends on the intensity of WGM. At low intensity, protein binding causes red shifts of WGM resonance wavelengths, known as the reactive sensing mechanism. By contrast, blue shifts are obtained at high intensities, which we explain as thermo-optoplasmonic (TOP) sensing, where molecules transform absorbed WGM radiation into heat. To support our conclusions, we experimentally investigated seven molecules and complexes; we observed blue shifts for dye molecules, amino acids, and anomalous absorption of enzymes in the near-infrared spectral region. As an example of an application, we propose a physical model of TOP sensing that can be used for the development of single-molecule absorption spectrometers.