Rhenium(I) complexes of type [Re(CO)3(NN)Cl] (NN = α-diimine) with MLCT absorption in the orange-red region of the visible spectrum have been synthesized and fully characterized, including single crystal X-ray diffraction on two complexes. The strong bathochromic shift of MLCT absorption was achieved through extension of the π-system of the electron-poor bidiazine ligand 4,4\'-bipyrimidine by the addition of fused phenyl rings, resulting in 4,4\'-biquinazoline. Furthermore, upon anionic cyclization of the twisted bidiazine, a new 4N-doped perylene ligand, namely, 1,3,10,12-tetraazaperylene, was obtained. Electrochemical characterization revealed a significant stabilization of the LUMO in this series, with the first reduction of the azaperylene found at E1/2(0/-) = -1.131 V vs. Fc+/Fc, which is the most anodic half-wave potential observed for N-doped perylene derivatives so far. The low LUMO energies were directly correlated to the photophysical properties of the respective complexes, resulting in a strongly red-shifted MLCT absorption band in chloroform with a λmax = 586 nm and high extinction coefficients (ε586nm > 5000 M-1 cm-1) ranging above 700 nm in the case of the tetraazaperylene complex. Such low-energy MLCT absorption is highly unusual for Re(I) α-diimine complexes, for which these bands are typically found in the near UV. The reported 1,3,10,12-tetraazaperylene complex displayed the [Re(CO)3(α-diimine)Cl] complex with the strongest MLCT red shift ever reported. UV-Vis NIR spectroelectrochemical investigations gave further insights into the nature and stability of the reduced states. The electron-poor ligands explored herein open up a new path for designing metal complexes with strongly red-shifted absorption, thus enabling photocatalysis and photomedical applications with low-energy, tissue-penetrating red light in future.

Three new Pt(II) complexes [(dpp-DAD)PtCl2] (I), [(Mes-DAD(Me)2)PtCl2] (II) and [(dpp-DAD(Me)2)PtCl2] (III) were synthesized by the direct reaction of [(CH3CN)2PtCl2] and corresponding redox-active 1,4-diaza-1,3-butadienes (DAD). The compounds were isolated in a single crystal form and their molecular structures were determined by X-ray diffraction. The purity of the complexes and their stability in solution was confirmed by NMR analysis. The Pt(II) ions in all compounds are in a square planar environment. The electrochemical reduction of complexes I-III proceeds in two successive cathodic stages. The first quasi-reversible reduction leads to the relatively stable monoanionic complexes; the second cathodic stage is irreversible. The coordination of 1,4-diaza-1,3-butadienes ligands with PtCl2 increases the reduction potential and the electron acceptor ability of the DAD ligands. The synthesized compounds were tested in relation to an adenocarcinoma of the ovary (SKOV3).

A series of new charge transfer (CT) chromophores of \"α-diimine-MII-catecholate\" type (where M is 3d-row transition metals-Cu, Ni, Co) were derived from 4,4\'-di-tert-butyl-2,2\'-bipyridyl and 3,6-di-tert-butyl-o-benzoquinone (3,6-DTBQ) in accordance with three modified synthetic approaches, which provide high yields of products. A square-planar molecular structure is inherent for monomeric [CuII(3,6-Cat)(bipytBu)]∙THF (1) and NiII(3,6-Cat)(bipytBu) (2) chromophores, while dimeric complex [CoII(3,6-Cat)(bipytBu)]2∙toluene (3) units two substantially distorted heteroleptic D-MII-A (where D, M, A are donor, metal and acceptor, respectively) parts through a donation of oxygen atoms from catecholate dianions. Chromophores 1-3 undergo an effective photoinduced intramolecular charge transfer (λ = 500-715 nm, extinction coefficient up to 104 M-1·cm-1) with a concomitant generation of a less polar excited species, the energy of which is a finely sensitive towards solvent polarity, ensuring a pronounced negative solvatochromic effect. Special attention was paid to energetic characteristics for CT and interacting HOMO/LUMO orbitals that were explored by a synergy of UV-vis-NIR spectroscopy, cyclic voltammetry, and DFT study. The current work sheds light on the dependence of CT peculiarities on the nature of metal centers from various groups of the periodic law. Moreover, the \"α-diimine-MII-catecholate\" CT chromophores on the base of \"late\" transition elements with differences in d-level\'s electronic structure were compared for the first time.

Two heteroleptic NiII complexes combined the redox-active catecholate and 2,2\'- bipyridine ligand platforms were synthesized to observe a photoinduced intramolecular ligand-to-ligand charge transfer (LL\'CT, HOMOcatecholate → LUMOα-diimine). A molecular design of compound [NiII(3,6-Cat)(bipy)]∙CH3CN (1) on the base of bulky 3,6-di-tert-butyl-o-benzoquinone (3,6-DTBQ) was an annelation of the ligand with an electron donor glycol fragment, producing derivative [NiII(3,6-Catgly)(bipy)]∙CH2Cl2 (2), in order to influence the energy of LL\'CT transition. A substantial longwave shift of the absorption peak was observed in the UV-Vis-NIR spectra of 2 compared with those in 1. In addition, the studied NiII derivatives demonstrated a pronounced negative solvatochromism, which was established using a broad set of solvents. The molecular geometry of both compounds can be ascribed as an insignificantly distorted square-planar type, and the π-π intermolecular stacking of the neighboring α-diimines is realized in a crystal packing. There is a lamellar crystal structure for complex 1, whereas the perpendicular T-motifs with the inter-stacks attractive π-π interactions form the packing of complex 2. The redox-active nature of ligand systems was clearly shown through the electrochemical study: a quasi-reversible one-electron reduction of 2,2\'-bipyridine and two reversible successive one-electron oxidative conversations (\"catecholate dianion-o-benzosemiquinonato radical anion-neutral o-benzoquinone\") were detected.

The reaction of the redox active 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene (dpp-BIAN) and iron(II) iodide in acetonitrile led to a new complex [(dpp-BIAN)FeIII2] (1). Molecular structure of 1 was determined by the single crystal X-ray diffraction analysis. The spin state of the iron cation in complex 1 at room temperature and the magnetic behavior of 1 in the temperature range of 2-300 K were studied using Mossbauer spectroscopy and magnetic susceptibility measurements, respectively. The neutral character of dpp-BIAN in 1 was confirmed by IR and UV spectroscopy. The electrochemistry of 1 was studied in solution and solid state using cyclic voltammetry. The generation of the radical anion form of the dpp-BIAN ligand upon reduction of 1 in a CH2Cl2 solution was monitored by EPR spectroscopy.

Sterically bulky diarylmethyl-based ligands have received increasing attention in the field of late-transition-metal catalyzed olefin polymerization. Ortho-substituents may have a significant impact on the performance of diarylmethyl-based α-diimine Pd catalysts. In this contribution, a series of α-diimine Pd catalysts bearing ortho-methoxyl/hydroxyl functionalized dibenzhydryl units were prepared, characterized, and investigated in ethylene polymerization and copolymerization with methyl acrylate (MA). The catalytic performances were improved by introducing more ortho-substituents. The catalysts exhibited good thermal stabilities at high temperatures, producing branched polyethylenes. The catalysts bearing hydroxyl groups possessing intramolecular H-bonding, resulted in slightly higher incorporation ratios of MA unit when compared with the catalysts bearing methoxyl groups.

The synthesis and characterization of a series of dibenzhydryl-based α-diimine Ni(II) complexes bearing a range of electron-donating or -withdrawing groups are described. Polymerization with ethylene is investigated in detail, involving the activator effect, influence of polymerization conditions on catalyst activity, thermal stability, polymer molecular weight and melting point. All of these Ni(II) complexes show great activity (up to 6 × 10⁶ g of PE (mol of Ni)-1·h-1), exceptional thermal stability (stable at up to 100 °C) and generate polyethylene with very high molecular weight (Mn up to 1.6 × 10⁶) and very narrow molecular weight distribution. In the dibromo Ni(II) system, the electronic perturbations exhibit little variation on the ethylene polymerization. In the Ni(acac) system, dramatic ligand electronic effects are observed in terms of catalytic activity and polyethylene molecular weight.

In this work, we studied propylene polymerization using some α-diimine palladium catalysts with systematically varied ligand sterics. In propylene polymerization, the ligand steric effect exhibits significant variations on the catalytic activity, polymer molecular weight, and branching density. However, the regio control for the polymer microstructure is poor. Furthermore, copolymerization of 1-octene with the highly challenging and biorenewable comonomer acrylic acid was investigated. High copolymer molecular weights and high comonomer incorporation ratios could be achieved in this system. This study provides a novel access for the direct synthesis of branched carboxylic acid functionalized polyolefins.

Cobalt dialkyl complexes bearing α-diimine ligands proved to be active precatalysts for the nondirected, C(sp3)-H selective hydrogen isotope exchange (HIE) of alkylarenes using D2 gas as the deuterium source. Alkylarenes with a variety of substitution patterns and heteroatom substituents on the arene ring were successfully labeled, enabling high levels of incorporation into primary, secondary, and tertiary benzylic C(sp3)-H bonds. In some cases, the HIE proceeded with high diastereoselectivity and application of the cobalt-catalyzed method to enantioenriched substrates with benzylic stereocenters provided enantioretentive hydrogen isotope exchange at tertiary carbons.