BACKGROUND: The material of a bandage plays an important role in wound management. Microorganisms can colonize the dressing and release toxins, which create dead cells in the wound. This allows the microorganisms to bind the dead cells and infect the wound. Thus, a dressing is needed that kills bacteria in the bandage. To combat health care-associated infections, antimicrobial treatment of medical textiles, such as gauze, uniforms, curtains, bed sheets, gowns, and masks, is required. Besides, antimicrobial resistance is another major problem of this century. Antibacterial overuse has contributed to drug-resistant bacteria. To combat these two problems, we synthesized new organo-selenium compounds that can be attached to the cotton of the dressing. We then used an in vivo wound model, which allowed us to measure the effectiveness of selenium attached to a cotton dressing, to prevent bacteria from infecting a wound.
METHODS: Organo-selenium was attached to cotton fabric, resulting in a fabric with 0.1% selenium covalently attached to it. Staphylococcus aureus (as well as methicillin-resistant S. aureus [MRSA]), Stenotrophomonas maltophilia, Enterococcus faecalis, Staphylococcus epidermidis, and Pseudomonas aeruginosa were chosen for the wound infection study. All the bacteria were enumerated in the wound dressing and in the wound tissue under the dressing. Wounds were made on the backs of mice. The material was used as a bandage over the wound. Bacteria were injected into the wound under the bandage. The amount of bacteria in the wound after 5 days was determined. A similar study was performed using dressing material that was soaked in phosphate buffered saline at 37 °C for 3 months before use.
RESULTS: Cotton dressing with selenium attached showed complete inhibition (7 logs, as compared with control dressing) of different bacterial strains, in both the dressing and \"the tissue\" of the wound. Similar results were obtained using selenium cotton dressing that was soaked for 3 months before use. Control cotton with no selenium showed complete infiltration of bacteria into the wound and the dressing. In addition, a study was performed under Food and Drug Administration standard methods to show the ability of the selenium to kill bacteria in the fabric, using material that was washed 5 times in detergent. This also showed complete killing of bacteria in the fabric.
CONCLUSIONS: The results show that the selenium remains in the dressing after washing and is able to completely protect the wound from bacterial infection. In the selenium bandage, no bacteria were found in the bandage or the wound after 5 days.

BACKGROUND Foreign body aspiration (FBA) is a common and serious problem in childhood that requires early recognition and treatment. Common complications include asphyxia, hemorrhage, infection, and pneumothorax. In severe cases of foreign body obstruction, death can result from asphyxia. We report an interesting case in which a forgotten cotton ball was inhaled into the lungs. CASE REPORT A 5-year-old boy presented to the local hospital with coughing for 6 days and fever for 4 days, without any information of foreign body aspiration upon admission. Laboratory findings indicated an elevated white blood cell; therefore, cefprozil was given as anti-infective treatment. However, the child\'s condition did not improve. A computed tomography scan showed left pulmonary atelectasis. Considering that the child\'s condition was serious, he was referred to our hospital for diagnosis and treatment. After referral, auscultation revealed decreased breath sounds over the left lung. After multidisciplinary discussion, combined with the results of auxiliary examination, the possibility of a foreign body was considered. He underwent rigid bronchoscopy, which confirmed a yellow-white foreign body in the left main bronchus that was later verified as a cotton ball. The operation was very successful. Eventually, his condition improved and he was discharged, without additional complications. CONCLUSIONS For children with unclear history of foreign body aspiration, bronchoscopy is recommended if there is recurrent pulmonary infection, low auscultation breath sounds, or abnormal imaging. The choice of surgical method depends on the location and type of foreign body and the experience of the surgeon, which is also very important.

The growing activity in the textile industry has been demanding the search for new and innovative technologies to meet consumers\' needs regarding more sustainable and ecological processes, with functionality receiving more attention. Bee products are known for their wide spectra of properties, including antioxidant and antibacterial activities. Propolis and honey are the most popular and used since ancient times for the most diverse applications due to their health benefits. With the increasing need for safer and more sustainable practices, the use of natural products for the functional finishing process can be a suitable alternative due to their safety and eco-friendly nature. For that, a biosolution, composed of a mixture of propolis and honey in water, was used to perform the functional finishing of cotton knits, both in the presence and in the absence of potassium alum as a chemical mordant. The fastness strength was also evaluated after three washing cycles. The antioxidant potential of the biosolution, assessed with the in vitro ABTS scavenging assay, provided textiles with the capacity to reduce more than 90% of the ABTS radical, regardless of the mordant presence and even after three washing cycles. Furthermore, biofunctional textiles decreased the growth of Bacillus subtilis, Propionibacterium acnes, Escherichia coli, and, particularly, Staphylococcus aureus cultures after 24 h of incubation with an increase in antibacterial activity when potassium alum was used. These findings show that bee products are promising and effective alternatives to be used in the textile industry to confer antioxidant and antibacterial properties to cotton textiles, thereby enhancing human health.

Cotton is used for the production of textiles, hygiene and cosmetic materials. During cultivation and technological processes, various types of substances (surfactants, softeners, lubricants, etc.) penetrate cotton, which can have a harmful effect on both the human body and the environment. The aim of this study was to analyze selected cotton products in order to identify the substances contained and to describe the potential possibilities of inducing textile contact dermatitis (CD). The impact of the identified compounds on the aquatic environment was also taken into account. Nine samples of cotton clothing and seven samples of cotton pads from various manufacturers were tested. Samples after extraction using the FUSLE (Focused Ultrasonic Liquid Extraction) technique were analyzed with GC/MS. Qualitative analysis was based on comparing mass spectra with library spectra using the following mass spectra deconvolution programs: MassHunter (Agilent), AMDIS (NIST), and PARADISE (University of Copenhagen). The parameter confirming the identification of the substance was the retention index. Through the non-target screening process, a total of 36 substances were identified, with an average AMDIS match factor of approximately 900 (\"excellent match\"). Analyzing the properties of the identified compounds, it can be concluded that most of them have potential properties that can cause CD, also due to the relatively high content in samples. This applies primarily to long-chain alkanes (C25-C31), saturated fatty acids, fatty alcohols (e.g., oleyl alcohol), and fatty acid amides (e.g., oleamide). However, there are not many reports describing cases of cotton CD. Information on the identified groups of compounds may be helpful in the case of unexplained sources of sensitization when the skin comes into contact with cotton materials. Some of the identified compounds are also classified as dangerous for aquatic organisms, especially if they can be released during laundering.

In the industrial sector, vegetable residual materials have received attention in the production of bio-colorant for textile dyeing. The current research endeavor is centered on investigating the possibility of using sugar beet leaves as a natural source of dye for the purpose of dyeing cotton fabrics. Different extraction methods were utilized to isolate the bio-colorant present in sugar beet residual material, and the most favorable colorant yield was obtained using a 5% methanolic KOH solution. For optimal dyeing results, the cotton fabric performed dyeing for a duration of 45 min at a temperature of 60 °C, using a salt solution concentration of 6 g/100 mL and 50 mL of the extracted dye solution. Characterization of dye using Fourier transform infrared spectroscopy analysis confirmed the presence of quercetin in the leaf extract. For the creation of a range of color variations, mordants that were chemical in nature, such as tannic acid, iron sulfate, potassium dichromate, and copper sulfate, as well as mordants that were bio-based, such as onion peel, pomegranate peel, henna, golden shower bark, and turmeric, were employed in harmony. In comparison, the utilization of bio-mordants resulted in darker shades that exhibited enhanced color intensity and superior color fastness properties with the value of 4-5 for wash, 4 for wet rubbing, 4-5 for dry rubbing, and 4-5 for light. The findings of this study hold significant value in terms of ecofriendly waste management and contribute to advancements in the industrial sector by utilizing waste residual materials as a natural source of colorants.

Quercetin, recognized for its antioxidant, anti-inflammatory, and antibacterial properties, faces limited biomedical application due to its low solubility. Cotton, a preferred wound dressing material over synthetic ones, lacks inherent antibacterial and wound-healing attributes and can benefit from quercetin features. This study explores the potential of overcoming these challenges through the inclusion complexation of quercetin with cyclodextrins (CDs) and the development of a nanofibrous coating on a cotton nonwoven textile. Hydroxypropyl-beta-cyclodextrin (HP-β-CD) and hydroxypropyl-gamma-cyclodextrin (HP-γ-CD) formed inclusion complexes of quercetin, with chitosan added to enhance antibacterial properties. Phase solubility results showed that inclusion complexation can enhance quercetin solubility up to 20 times, with HP-γ-CD forming a more stable inclusion complexation compared with HP-β-CD. Electrospinning of the nanofibers from HP-β-CD/Quercetin and HP-γ-CD/Quercetin aqueous solutions without the use of a polymeric matrix yielded a uniform, smooth fiber morphology. The structural and thermal analyses of the HP-β-CD/Quercetin and HP-γ-CD/Quercetin nanofibers confirmed the presence of inclusion complexes between quercetin and each of the CDs (HP-β-CD and HP-γ-CD). Moreover, HP-β-CD/Quercetin and HP-γ-CD/Quercetin nanofibers showed a near-complete loading efficiency of quercetin and followed a fast-releasing profile of quercetin. Both HP-β-CD/Quercetin and HP-γ-CD/Quercetin nanofibers showed significantly higher antioxidant activity compared to pristine quercetin. The HP-β-CD/Quercetin and HP-γ-CD/Quercetin nanofibers also showed antibacterial activity, and with the addition of chitosan in the HP-γ-CD/Quercetin system, the Chitosan/HP-γ-CD/Quercetin nanofibers completely eliminated the investigated bacteria species. The nanofibers were nontoxic and well-tolerated by cells, and exploiting the quercetin and chitosan anti-inflammatory activities resulted in the downregulation of IL-6 and NO secretion in both immune as well as regenerative cells. Overall, CD inclusion complexation markedly enhances quercetin solubility, resulting in a biofunctional antioxidant, antibacterial, and anti-inflammatory wound dressing through a nanofibrous coating on cotton textiles.

Non-degradable plastic mulch films used in agriculture are polluting the environment by leaving residues and microplastics in the soil. They are also difficult to recycle due to contamination during their use. Biodegradable mulch films are needed as alternatives so that they can be used effectively during the growing season and later be ploughed to be degraded in soil. However, market-available so-called biodegradable mulch films are very slow to degrade in the natural environment and thus do not fit with crop rotation demands or annual cultivation. In this study, we have developed mulch films from cotton gin trash (CGT) and/or gin motes (GM) in combination with biodegradable polycaprolactone and demonstrated their effectiveness over 3 months in outdoor conditions. Both the stability and degradation behaviours of mulch film samples were observed when they were placed on top of the soil and buried in the soil, respectively. Pesticide residue analysis also was carried out on CGT powder to identify and quantify individual pesticides against a matrix of known pesticides. The mulch films prepared in this study showed comparable and stable mechanical properties compared to commercial biodegradable mulch film, though were much quicker to degrade when buried in the soil. No pesticides were detected in the CGT samples. The films produced were vapour-permeable and may be useful in practical agricultural settings by being able to maintain consistent soil moisture and allowing precipitation to penetrate gradually. The lab-scale production cost for the film was 98.8 AUD/kg, which could be lowered by integrating a continuous film line in large-scale production.

Cotton plays a crucial role in the progress of the textile industry and the betterment of human life by providing natural fibers. In our study, we explored the genetic determinants of cotton architecture and fiber yield and quality by crossbreeding Gossypium hirsutum and Gossypium barbadense, creating a recombinant inbred line (RIL) population. Utilizing SNP markers, we constructed an extensive genetic map encompassing 7,730 markers over 2,784.2 cM. We appraised two architectural and seven fiber traits within six environments, identifying 58 QTLs, of which 49 demonstrated stability across these environments. These encompassed QTLs for traits such as lint percentage (LP), boll weight (BW), fiber strength (STRENGTH), seed index (SI), and micronaire (MIC), primarily located on chromosomes chr-A07, chr-D06, and chr-D07. Notably, chr-D07 houses a QTL region affecting SI, corroborated by multiple studies. Within this region, the genes BZIP043 and SEP2 were identified as pivotal, with SEP2 particularly showing augmented expression in developing ovules. These discoveries contribute significantly to marker-assisted selection, potentially elevating both the yield and quality of cotton fiber production. These findings provide valuable insights into marker-assisted breeding strategies, offering crucial information to enhance fiber yield and quality in cotton production.

Transformation of a fibrous mat into a three-dimensional (3D) scaffold opens up abundant innovative prospects in biomedical research, particularly for studying both soft as well as hard tissues. Electrospun nanofibers, which mimic the extracellular matrix have attracted significant attention in various studies. This research focuses on rapidly converting a fibrous mat made of polycaprolactone (PCL)/pluronic F-127 (PF-127) with different percentages of monetite calcium phosphate (MCP) into desirable 3D matrix cotton using a unique gas foaming technology. These matrix cottons possess biomimetic properties and have oriented porous structures. Using this innovative technique, various shapes of 3D matrix cotton, such as squares, hollow tubes, and other customizable forms, were successfully produced. Importantly, these 3D matrix cottons showed a consistent distribution of monetite particles with total porosity ranging from 90% to 98%. The structure of the 3D matrix cotton, its water/blood absorption capacity, the potential for causing non-hemolysis, and rapid hemostatic properties were thoroughly investigated. Additionally, periodontal cells were cultured on the 3D matrix cotton to assess their viability and morphology, revealing promising results. Furthermore, a coculture study involving NIH-3T3 and MG-63 cells on the 3D matrix cotton showed spheroidal formation within 24 h. Notably, in vitro assessments indicated that the matrix cotton containing 15% monetite (PCL-MMC15%) exhibited superior absorbent capabilities, excellent cell viability, and rapid hemostatic characteristics. Subsequently, the effectiveness of PCL-MMC15% in promoting mandibular bone regeneration was evaluated through an in vivo study on rabbits using a mandibular injury model. The results demonstrated that PCL-MMC15% facilitated the resolution of defects in the mandibular region by initiating new bone formation. Therefore, the presented 3D matrix cotton (PCL-MMC15%) shows significant promise for applications in both mandibular bone regeneration and hemostasis.

This work aims to investigate the effects of deep eutectic solvents (DES) on the chemical and physical structure of cellulose. Choline chloride-oxalic acid and choline chloride-oxalic acid-glycerol were selected as solvents and cotton fibers was sued as raw materials to explore the difference between cotton fibers treated separately with two different DES. According to yield analysis, ternary solvents alleviated the degradation of cellulose when comparing to binary solvents, resulting in over 90 % of cellulose being obtained. Particularly, there is an esterification reaction of cellulose during treatment with the DES system, which also affects the performance of the subsequent products. Through the simple use of mechanical foaming with polyvinyl alcohol and the palm wax impregnation process, foams with a water contact angle greater than 140° and excellent mechanical properties can be obtained. The resultant foam material has 5 % linear elastic area, and prominent compressive strength providing potential use in the packaging industry in the replacement of plastic.