UNASSIGNED: Microplastics from plastic materials can affect human health. This study aimed to assess their presence in nasal irrigation fluids obtained from reused bottles based on usage duration.
UNASSIGNED: Readily available nasal irrigation bottles made of polypropylene were purchased. Unused irrigation bottles served as controls. Bottles mimicking 1-, 3-, and 6-month reuse were prepared as test samples. Nasal irrigation fluid samples (n=12) were collected from each set of irrigation bottles: three from new control bottles and nine from bottles mimicking 1-, 3-, and 6-month reuse. Raman spectroscopy was employed to detect microplastics in the nasal irrigation samples; the results were compared according to the bottle use duration.
UNASSIGNED: An average of 33.00±20.42 (ea/300 mL) microplastic particles was detected in the nasal irrigation fluid from the control bottles relative to an average of 68.66±30.07, 261.66±20.59, and 204.33±52.16 (ea/300 mL) from bottles used for 1, 3, and 6 months, respectively. The majority of the detected microplastics were 10-100 μm in size and fragmentshaped in form. The predominant microplastic was polypropylene, indicating direct release from irrigation bottles.
UNASSIGNED: We found microplastics in nasal irrigation fluids, likely originating from the repeated use of nasal irrigation bottles. The quantity of microplastics was notably elevated in the samples obtained from bottles simulating 3 months of use compared to those in the control samples. Thus, we propose developing guidelines regulating the duration of nasal irrigation bottle usage to mitigate microplastic infiltration into the body through the sinonasal cavity.

A wide range of active agents, synthetic and natural agents such as essential oils, chitosan and polyphneols consisting of curcumin, gallic acid, anthocyanins, and catechins have been used in order to develop antimicrobial packaging systems, and among them, natural polyphenolic compounds, specially curcumin (Cur) has great potential due to effective biological activities in developing food packaging material. Quercetin (Quer) is also the mostly studied flavonol as a color-changing indicator in the food industry and has been already developed as a realistic alternative for smart and active food packaging. The reason for choosing these two polyphenolic compounds is that they simultaneously possess many beneficial properties such as antioxidant, antibacterial, antiviral, antitumoral, and anti-inflammatory effects. Additionally, the main objective of the study is to combine polypropylene (PP), which is the most preferred and cost-effective polymer in the packaging industry, with these active ingredients, rather than using more expensive polymer types. In this context, PP-Quer or PP-Cur membranes, which are new experiences based on these literatures were chemically characterized by Fourier transform infrared spectroscopy, and the surface morphology of these composite membranes was characterized by scanning electron microscopy. The antibacterial response against gram-positive (Staphylococcus aureus) and gram-negative (Escherichia coli) bacteria species was investigated. Furthermore, the reactive oxygen species generation and anticancer activity of these composite membranes using human colorectal adenocarcinoma (HT-29) were observed. We proposed that PP-Quer or PP-Cur composite membranes can be a potential candidate as active packaging material in the food industry.

BACKGROUND: Polypropylene material is commonly used for posterior wall reconstruction in hernia repair, in contrast with the classically described stainless-steel wire used at Shouldice Hospital. This study was conducted to evaluate possible differences in Shouldice Repair outcomes using polypropylene or stainless-steel wire sutures.
METHODS: A prospective follow-up of consecutive patients who underwent elective unilateral Shouldice primary inguinal hernia repair at Shouldice Hospital between December 6, 2021, and September 1, 2022, was conducted. Data was collected from follow-up telephone calls as well as manually reviewing patient\'s charts. The primary objective was to determine whether the use of polypropylene was non-inferior to the use of stainless-steel wire, regarding the recurrence rate reported by the patients with a minimum follow-up of 1 year after Shouldice primary inguinal hernia repair.
RESULTS: A total of 1120 patients were contacted by telephone (polypropylene: 560; stainless-steel wire: 560). The median follow-up period was 16 months (interquartile range: 15-18). In 22 (1.96%) cases a surgical site infection was diagnosed. There was a total of 18 recurrences reported by the patients (1.6%). There was no statistical difference between the groups (polypropylene: 7 (1.25%) vs. stainless steel wire: 11 (1.96%), p > 0.05) for the recurrence rate.
CONCLUSIONS: The use of polypropylene is non-inferior to the use of stainless-steel wire regarding recurrence rate at a median follow-up period of 16 months after elective unilateral Shouldice primary inguinal hernia repair. This finding may encourage other centers where stainless-steel wire is not easily available to perform the Shouldice Repair.

This work reports the production of nanoplastics (NPs) from polypropylene (PP) free of the antioxidant Irgafos® 168 (IRG) and alkane oligomers (ALK). PP pellets were milled into a powder with particle sizes in the 100-500 μm range. Additives and oligomers were removed using dichloromethane, and the powder exposed to UV irradiation, followed by filtration through 1 μm filters. PP suspensions, free of antioxidant and oligomers, were reloaded with IRG and ALK to their original commercial concentrations. This approach allowed testing the aquatic toxicity of IRG at concentrations compromised by water solubility limits. Toxicity assays using the cladoceran Daphnia magna with 24-48 h immobilization of neonates as endpoint showed toxicity for NPs containing IRG, with EC20 (48 h) in the 1.8-3.5 mg/L range, that corresponded to IRG exposure <1.2 μg/L. Suspensions of PP containing ALK, but not IRG, exhibited low toxicity (EC20 > 20 mg/L). The results allowed estimating the toxicity of IRG with a EC50 value of 3.3 ± 1.1 μg/L. Assays with different proportions of IRG and its oxidized form showed no differences. This work demonstrated the aquatic toxicity of IRG, for which there were no previous data, and developed a method for testing the toxicity of non-polar additives without being limited by their solubility.

The extensive use of polypropylene (PP) in various industries has heightened interest in developing efficient methods for recycling and optimising its mixtures. This study focuses on formulating predictive models for the Melt Flow Rate (MFR) and shear viscosity of PP blends. The investigation involved characterising various grades, including virgin homopolymers, copolymers, and post-consumer recyclates, in accordance with ISO 1133 standards. The research examined both binary and ternary blends, utilising traditional mixing rules and symbolic regression to predict rheological properties. High accuracy was achieved with the Arrhenius and Cragoe models, attaining R2 values over 0.99. Symbolic regression further enhanced these models, offering significant improvements. To mitigate overfitting, empirical noise and variable swapping were introduced, increasing the models\' robustness and generalisability. The results demonstrated that the developed models could reliably predict MFR and shear viscosity, providing a valuable tool for improving the quality and consistency of PP mixtures. These advancements support the development of recycling technologies and sustainable practices in the polymer industry by optimising processing and enhancing the use of recycled materials.

The effect of contamination of polypropylene (PP) with selected polymers is studied to simulate the effect of mis-sorting in recycling streams. Polystyrene (PS), polyethylene terephthalate (PET), polycarbonate (PC), acrylonitrile butadiene styrene (ABS), and polylactic acid (PLA) were compounded with PP at different concentrations varying between 3 and 10%. Infrared spectroscopy proved the absence of chemical bonds between the constituents. Generally, melt flowability, except for the PP/PLA blend, and crystallinity were only slightly affected by the incorporation of the contaminating polymers. Samples of the polymer blends were injection moulded and further tested for their tensile and impact properties. Critical behaviour was induced by the introduction of a weld line as a result of the application of multiple gating points during injection moulding. Results generally show the applicability of PP mixtures within the investigated range of contamination, without much sacrifice in mechanical performance. However, in the case of ABS and PLA, more care should be taken when designing complex parts with weld lines, due to reduced toughness.

In the present work, short glass fiber is superficially modified with different concentrations of polyhedral oligomeric silsesquioxanes (Trisilanol-Isobutyl, TSI-POSS) for processing as a filler in a polypropylene matrix (PP). It is observed that increasing the amount of TSI-POSS increases the fracture point and tensile strength; the opposite is the case for the strength impact property. The behaviors of both dynamic mechanical and thermal analyses are also observed. The flame behavior, i.e., the burning rate, decreases with increasing TSI-POSS in the polymers.

A new two-step method for developing a nanocomposite of polypropylene (PP) decorated with photocatalytically active TiO2 nanoparticles (nTiO2) is proposed. This method involves the low-temperature plasma functionalization of polypropylene followed by the ultrasound-assisted anchoring of nTiO2. The nanoparticles, polymeric substrate, and resultant nanocomposite were thoroughly characterized using nanoparticle tracking analysis (NTA), microscopic observations (SEM, TEM, and EDX), spectroscopic investigations (XPS and FTIR), thermogravimetric analysis (TG/DTA), and water contact angle (WCA) measurements. The photocatalytic activity of the nanocomposites was evaluated through the degradation of methyl orange. The individual TiO2 nanoparticles ranged from 2 to 6 nm in size. The oxygen plasma treatment of PP generated surface functional groups (mainly -OH and -C=O), transforming the surface from hydrophobic to hydrophilic, which facilitated the efficient deposition of nTiO2. Optimized plasma treatment and sonochemical deposition parameters resulted in an active photocatalytic nTiO2/PP system, degrading 80% of the methyl orange under UVA irradiation in 200 min. The proposed approach is considered versatile for the functionalization of polymeric materials with photoactive nanoparticles and, in a broader perspective, can be utilized for the fabrication of self-cleaning surfaces.

Predicting the mechanical properties of polymer materials using machine learning is essential for the design of next-generation of polymers. However, the strong relationship between the higher-order structure of polymers and their mechanical properties hinders the mechanical property predictions based on their primary structures. To incorporate information on higher-order structures into the prediction model, X-ray diffraction (XRD) can be used. This study proposes a strategy to generate appropriate descriptors from the XRD analysis of the injection-molded polypropylene samples, which were prepared under almost the same injection molding conditions. To this end, first, Bayesian spectral deconvolution is used to automatically create high-dimensional descriptors. Second, informative descriptors are selected to achieve highly accurate predictions by implementing the black-box optimization method using Ising machine. This approach was applied to custom-built polymer datasets containing data on homo- polypropylene and derived composite polymers with the addition of elastomers. Results show that reasonable accuracy of predictions for seven mechanical properties can be achieved using only XRD.
This study proposes a strategy to generate appropriate descriptors, which realize highly accurate predictions of mechanical properties via machine learning from the XRD analysis of the molded polypropylene samples.

BACKGROUND: Due to the ability of metal ions to cross the blood-brain barrier, there has been interest in analyzing cerebrospinal fluid (CSF) for trace element concentrations to investigate possible correlations with neurodegenerative diseases. In this study, Sarstedt polypropylene CSF collection tubes were analyzed to determine the contamination levels of aluminum, titanium, chromium, manganese, cobalt, nickel, molybdenum, gadolinium, vanadium, arsenic, cadmium, mercury, lead, thallium, selenium, copper, zinc, and iron.
METHODS: Sarstedt polypropylene CSF collection tubes from 2 separate lots (n = 10 per lot) were filled with a 2 mL aliquot of a CSF pool with known element concentrations. After 24 hours of leaching at room temperature, all 18 elements were analyzed via inductively coupled plasma mass spectrometry (ICP-MS). Results were subtracted from the initial pool concentration to determine contamination levels.
RESULTS: No detectable contamination above the assay limit of detection was found in 11 analytes. Molybdenum and selenium contamination was measured in all tubes, and aluminum, titanium, manganese, thallium, and zinc had minimal levels of sporadic detectable contamination in 25% or fewer of the tubes tested.
CONCLUSIONS: Sarstedt polypropylene CSF tubes are an acceptable collection tube for the analysis of most assessed metals in CSF.