The excellent performance of electromagnetic wave absorbers primarily depends on the coordination among components and the rational design of the structure. In this study, a series of porous fibers with carbon nanotubes uniformly distributed in the shape of pine leaves are prepared through electrospinning technique, one-pot hydrothermal synthesis, and high-temperature catalysis method. The impedance matching of the nanofibers with a porous structure is optimized by incorporating melamine into the spinning solution, as it undergoes gas decomposition during high-temperature calcination. Moreover, the electronic structure can be modulated by controlling the NH4F content in the hydrothermal synthesis process. Ultimately, the Ni/Co/CrN/CNTs-CF specimen (P3C NiCrN12) exhibited superior performance, while achieving a minimum reflection loss (RLmin) of -56.18 dB at a thickness of 2.2 mm and a maximum absorption bandwidth (EABmax) of 5.76 GHz at a thickness of 2.1 mm. This study presents an innovative approach to fabricating lightweight, thin materials with exceptional absorption properties and wide bandwidth by optimizing the three key factors influencing electromagnetic wave absorption performance.

It is expected that composites made of carbon nanotubes (CNT) and copper (Cu) display both mechanical and electrical properties, but the low damage dispersion and high-quality composite of high-content CNTs have always been research difficulties. In this paper, high-content CNTs/Cu composites were prepared. The effects of the sintering method, sintering temperature, directional rolling and the CNTs\' content on the relative density, hardness and electrical conductivity of the composites were studied. The uniform dispersion of high-content CNTs in Cu matrix was achieved by ball milling, sintering and rolling, and the processes did not cause more damage to the CNTs. The properties of composites prepared by spark plasma sintering (SPS) and vacuum hot pressing sintering (HPS) were compared, and the optimum process parameters of SPS were determined. When the CNTs\' content is 2 wt.%, the hardness is 134.9 HBW, which is still 2.3 times that of pure Cu, and the conductivity is the highest, reaching 78.4%IACS. This study provides an important reference for the high-quality preparation and performance evaluation of high-content CNTs/Cu composites.

Composite plates comprising a blend of rare earth neodymium-(Nd) doped M-type barium ferrite (BaM) with CNTs (carbon nanotubes) and polyethylene WERE synthesized through a self-propagating reaction and hot-pressing treatment. The plates\' microscopic characteristics were analyzed utilizing X-ray diffraction (XRD), Fourier transform infrared spectrophotometry (FTIR), thermo-gravimetric analysis (TGA), Raman, and scanning electron microscopy (SEM) analytical techniques. Their microwave absorption performance within the frequency range of 8.2 to 18 GHz was assessed using a vector network analyzer. It showed that CNTs formed a conductive network on the surface of the Nd-BaM absorber, significantly enhancing absorption performance and widening the absorption bandwidth. Furthermore, dielectric polarization relaxation was investigated using the Debye theory, analyzing the Cole-Cole semicircle. It was observed that the sample exhibiting the best absorbing performance displayed the most semicircles, indicating that the dielectric polarization relaxation phenomenon can increase the dielectric relaxation loss of the sample. These findings provide valuable data support for the lightweight preparation of BaM-based absorbing materials.

Carbon nanomaterials are indispensable due to their unique properties of high electrical conductivity, mechanical strength and thermal stability, which makes them important nanomaterials in biomedical applications and waste management. Limitations of conventional nanomaterials, such as limited surface area, difficulty in fine tuning electrical or thermal properties and poor dispersibility, calls for the development of advanced nanomaterials to overcome such limitations. Commonly, carbon nanomaterials were synthesized by chemical vapor deposition (CVD), laser ablation or arc discharge methods. The advancement in these techniques yielded monodispersed carbon nanotubes (CNTs) and allows p-type and n-type doping to enhance its electrical and catalytic activities. The functionalized CNTs showed exceptional mechanical, electrical and thermal conductivity (3500-5000 W/mK) properties. On the other hand, carbon quantum dots (CQDs) exhibit strong photoluminescence properties with high quantum yield. Carbon nanohorns are another fascinating type of nanomaterial that exhibit a unique structure with high surface area and excellent adsorption properties. These carbon nanomaterials could improve waste management by adsorbing pollutants from water and soil, enabling precise environmental monitoring, while enhancing wastewater treatment and drug delivery systems. Herein, we have discussed the potentials of all these carbon nanomaterials in the context of innovative waste management solutions, fostering cleaner environments and healthier ecosystems for diverse biomedical applications such as biosensing, drug delivery, and environmental monitoring.

Electrochromic devices (ECDs), which are capable of modulating optical properties in the visible and long-wave infrared (LWIR) spectra under applied voltage, are of great significance for military camouflage. However, there are a few materials that can modulate dual frequency bands. In addition, the complex and specialized structural design of dual-band ECDs poses significant challenges. Here, we propose a novel approach for a bendable ECD capable of modulating LWIR radiation and displaying multiple colors. Notably, it eliminates the need for a porous electrode or a grid electrode, thereby improving both the response speed and fabrication feasibility. The device employs multiwalled carbon nanotubes (MWCNTs) as both the transparent electrode and the LWIR modulator, polyaniline (PANI) as the electrochromic layer, and ionic liquids (HMIM[TFSI]) as the electrolyte. The ECD is able to reduce its infrared emissivity (Δε = 0.23) in a short time (resulting in a drop in infrared temperature from 50 to 44 °C) within a mere duration of 0.78 ± 0.07 s while changing its color from green to yellow within 3 s when a positive voltage of 4 V is applied. In addition, it exhibits excellent flexibility, even under bending conditions. This simplified structure provides opportunities for applications such as wearable adaptive camouflage and multispectral displays.

Electroactive coatings for smart wearable textiles based on a furan bio-epoxy monomer (BOMF) crosslinked with isophorone diamine (IPD) and additivated with carbon nanotubes (CNTs) are reported herein. The effect of BOMF/IPD molar ratio on the curing reaction, as well as on the properties of the crosslinked resins was first assessed, and it was found that 1.5:1 BOMF/IPD molar ratio provided higher heat of reaction, glass transition temperature, and mechanical performance. The resin was then modified with CNT to prepare electrically conductive nanocomposite films, which exhibited conductivity values increased by eight orders of magnitude upon addition of 5 phr of CNTs. The epoxy/CNT nanocomposites were finally applied as coatings onto a cotton fabric to develop electrically conductive, hydrophobic and breathable textiles. Notably, the integration of CNTs imparted efficient and reversible electrothermal behavior to the cotton fabric, showcasing its potential application in smart and comfortable wearable electronic devices.

Carbon nanotube (CNT) has fostered research as a promising nanomaterial for a variety of applications due to its exceptional mechanical, optical, and electrical characteristics. The present article proposes a novel and comprehensive micromechanical framework to assess the viscoelastic properties of a multiscale CNT-reinforced two-dimensional (2D) woven hybrid composite. It also focuses on demonstrating the utilisation of the proposed micromechanics in the dynamic analysis of shell structure. First, the detailed constructional attributes of the proposed trans-scale composite material system are described in detail. Then, according to the nature of the constructional feature, mathematical modelling of each constituent phase or building block\'s material properties is established to evaluate the homogenised viscoelastic properties of the proposed composite material system. To highlight the novelty of this study, the viscoelastic characteristics of the modified matrix are developed using the micromechanics method of Mori-Tanaka (MT) in combination with the weak viscoelastic interphase (WI) theory. In the entire micromechanical framework, the CNTs are considered to be randomly oriented. The strength of the material (SOM) approach is used to establish mathematical frameworks for the viscoelastic characteristics of yarns, whereas the unit cell method (UCM) is used to determine the viscoelastic properties of the representative unit cell (RUC). Different numerical results have been obtained by varying the CNT composition, interface conditions, agglomeration, carbon fibre volume percentage, excitation frequency, and temperature. The influences of geometrical parameters like yarn thickness, width, and the gap length to yarn width ratio on the viscoelasticity of such composite material systems are also explored. The current study also addresses the issue of resultant anisotropic viscoelastic properties due to the use of dissimilar yarn thickness. The results of this micromechanical analysis provide valuable insights into the viscoelastic properties of the proposed composite material system and suggest its potential applications in vibration damping. To demonstrate the application of developed novel micromechanics in vibration analysis, as one of the main contributions, comprehensive numerical experiments are conducted on a shell panel. The results show a significant reduction in vibration amplitudes compared to traditional composite materials in the frequency response and transient response analyses. To focus on the aspect of micromechanical behaviour on dynamic response and for the purpose of brevity, only linear strain displacement relationships are considered for dynamic analysis. These insights could inform future research and development in the field of composite materials.

The optical properties of polyvinylidene fluoride (PVDF) polymer nanocomposite films incorporating SrTiO3/carbon nanotubes (CNTs) as nanofillers are investigated. PVDF/SrTiO3/CNTs films were prepared by the solution casting technique. X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) analyses confirmed the incorporation of SrTiO3/CNTs into the PVDF matrix. The addition of nanofillers influenced the crystalline structure, morphology, and optical properties of the films. SEM images showed spherulite morphology, which is a spherical aggregate of crystalline polymer chains. The addition of a SrTiO3/CNTs nanofiller modified the polymer\'s electronic structure, causing a variation in the energy gap. The addition of SrTiO3/CNTs at 0.1 wt% increased the band gap, refractive index, and nonlinear optical properties of the PVDF films. These improvements indicate the potential of these nanocomposite films in optoelectronic applications such as solar cells, image sensors, and organic light-emitting diodes.

Na3V2(PO4)3 (NVP) encounters significant obstacles, including limited intrinsic electronic and ionic conductivities, which hinder its potential for commercial feasibility. Currently, the substitution of V3+ with Mn2+ is proposed to introduce favorable carriers, enhancing the electronic conductivity of the NVP system while providing structural support and stabilizing the NASICON framework. This substitution also widens the Na+ migration pathways, accelerating ion transport. Furthermore, to bolster stability, Al2O3 coating is applied to suppress the dissolution of transition metal Mn in the electrolyte. Notably, the Al2O3 coating serves a triple role in reducing HClO4 concentration in the electrolyte, inhibiting Mn dissolution, and functioning as the ion-conducting phase. Likewise, carbon nanotubes (CNTs) effectively hinder the agglomeration of active particles during high-temperature sintering, thereby optimizing the conductivity of NVP system. In addition, the excellent structural stability is investigated by in situ XRD measurement, effectively improving the volume collapse during Na+ de-embedding. Moreover, the Na3V5.92/3Mn0.04(PO4)3/C@CNTs@1wt.%Al2O3 (NVMP@CNTs@1wt.%Al2O3) possesses unique porous structure, promoting rapid Na+ transport and increasing the interface area between the electrolyte and the cathode material. Comprehensively, the NVMP@CNTs@1wt.%Al2O3 sample demonstrates a remarkable reversible specific capacity of 122.6 mAh/g at 0.1 C. Moreover, it maintains a capacity of 115.9 mAh/g at 1 C with a capacity retention of 90.2 mAh/g after 1000 cycles. Even at 30 C, it achieves a capacity of 87.9 mAh/g, with a capacity retention rate of 84.87 % after 6000 cycles. Moreover, the NVMP@CNTs@1wt.%Al2O3//CHC full cell can deliver a high reversible capacity of 205.5 mAh/g at 0.1 C, further indicating the superior application potential in commercial utilization.

Occurrence of contaminants in water is one of the major global concerns humanity is still facing today: most of them are extremely toxic and dangerous for human health, obliging their removal for a proper and correct process of sanitation. Among wastewater treatment technologies, in the view of development of sustainable and environmentally friendly processes, membrane adsorption has proved to be a fast and simple method in the removal of pollutants, offering great contaminants recovery percentages, fast adsorbent regeneration and recycle, and easy scale-up. Due to their large surface area and tunable chemistry, carbon nanotubes (CNTs)-based materials revealed to be extraordinary adsorbents, exceeding by far performances of ordinary organic and inorganic membranes such as polyethersulfone, polyvinylidene fluoride, polytetrafluoroethylene, ceramics, currently employed in membrane technologies for wastewater treatment. In consideration of this, the review aims to summarize recent developments in the field of carbon nanotubes-based materials for pollutants recovery from water through adsorption processes. After a brief introduction concerning what adsorption phenomenon is and how it is performed and governed by using carbon nanotubes-based materials, the review discusses into detail the employment of three common typologies of CNTs-based materials (CNTs powders, CNTs-doped polymeric membranes and CNTs membranes) in adsorption process for the removal of water pollutants. Particularly focus will be devoted on the emergent category of self-standing CNTs membranes (buckypapers), made entirely of carbon nanotubes, exhibiting superior performances than CNTs and CNTs-doped polymeric membranes in terms of preparation strategy, recovery percentages of pollutants and regeneration possibilities. The extremely encouraging results presented in this review aim to support and pave the way to the introduction of alternative and more efficient pathways in wastewater treatment technologies to contrast the problem of water pollution.