BACKGROUND: A core feature of body dysmorphic disorder (BDD) is body image disturbance. Many with BDD misperceive and are dissatisfied with the sizes and shapes of body parts, but detailed quantification and analysis of this has not yet been performed. To address this gap, we applied Somatomap 3D, a digital avatar tool, to quantify body image disturbances by assessing body size estimation (BSE) accuracy and body dissatisfaction.
METHODS: Sixty-one adults (31 with BDD, 30 healthy controls) created avatars to reflect their perceived current body and ideal body by altering 23 body part sizes and lengths using Somatomap 3D. Physical measurements of corresponding body parts were recorded for comparison. BSE accuracy (current minus actual) and body dissatisfaction (ideal minus current) were compared between groups and in relation to BDD symptom severity using generalized estimating equations.
RESULTS: Individuals with BDD significantly over- and under-estimated certain body parts compared to healthy controls. Individuals with BDD overall desired significantly thinner body parts compared to healthy controls. Moreover, those with worse BSE accuracy had greater body dissatisfaction and poorer insight.
CONCLUSIONS: In sum, this digital avatar tool revealed disturbances in body image in individuals with BDD that may have perceptual and cognitive/affective components.

OBJECTIVE: To assess the ability of the pressure gradient between breast lesions and adjacent normal tissue estimated by 3D subharmonic-aided pressure estimation (SHAPE) to characterize indeterminate breast lesions.
METHODS: This prospective study enrolled patients scheduled for ultrasound-guided needle biopsies of a breast lesion. Before the biopsy, 3D SHAPE data were collected from the breast lesion during the infusion of an ultrasound contrast agent (Definity) as well as after clearance of the agent. Direct, invasive pressure measurements in the lesion and adjacent normal tissue were then obtained using an intracompartmental pressure monitoring system (C2DX) before tissue sampling as part of the biopsy procedure. The mean SHAPE gradient and invasive measurement gradient between the lesion and adjacent normal tissue were compared to the biopsy results. The SHAPE gradients were also compared to the invasive pressure gradients.
RESULTS: There were 8 malignant and 13 benign lesions studied. The SHAPE gradients and invasive pressure gradients were significantly different between the benign and malignant lesions (2.86 ± 3.24 vs. -0.03 ± 1.72 a.u.; p = 0.03 and 9.9 ± 8.5 vs. 20.9 ± 8.0 mmHg; p = 0.008, respectively). The area under the curves, specificities, and sensitivities for detecting malignancy by SHAPE gradients and invasive pressure gradients were 0.79 and 0.88, 77% and 92%, and 88% and 50%, respectively. A weak negative correlation was found between the SHAPE and invasive pressure gradients (r = -0.2).
CONCLUSIONS: The pressure gradient between a breast lesion and adjacent normal tissue estimated by 3D SHAPE shows potential for characterizing indeterminate breast lesions.

MRI is a valuable tool for diagnosing a broad spectrum of acute and chronic ankle disorders, including ligament tears, tendinopathy, and osteochondral lesions. Traditional two-dimensional (2D) MRI provides a high image signal and contrast of anatomic structures for accurately characterizing articular cartilage, bone marrow, synovium, ligaments, tendons, and nerves. However, 2D MRI limitations are thick slices and fixed slice orientations. In clinical practice, 2D MRI is limited to 2 to 3 mm slice thickness, which can cause blurred contours of oblique structures due to volume averaging effects within the image slice. In addition, image plane orientations are fixated and cannot be changed after the scan, resulting in 2D MRI lacking multiplanar and multiaxial reformation abilities for individualized image plane orientations along oblique and curved anatomic structures, such as ankle ligaments and tendons. In contrast, three-dimensional (3D) MRI is a newer, clinically available MRI technique capable of acquiring high-resolution ankle MRI data sets with isotropic voxel size. The inherently high spatial resolution of 3D MRI permits up to five times thinner (0.5 mm) image slices. In addition, 3D MRI can be acquired image voxel with the same edge length in all three space dimensions (isotropism), permitting unrestricted multiplanar and multiaxial image reformation and postprocessing after the MRI scan. Clinical 3D MRI of the ankle with 0.5 to 0.7 mm isotropic voxel size resolves the smallest anatomic ankle structures and abnormalities of ligament and tendon fibers, osteochondral lesions, and nerves. After acquiring the images, operators can align image planes individually along any anatomic structure of interest, such as ligaments and tendons segments. In addition, curved multiplanar image reformations can unfold the entire course of multiaxially curved structures, such as perimalleolar tendons, into one image plane. We recommend adding 3D MRI pulse sequences to traditional 2D MRI protocols to visualize small and curved ankle structures to better advantage. This article provides an overview of the clinical application of 3D MRI of the ankle, compares diagnostic performances of 2D and 3D MRI for diagnosing ankle abnormalities, and illustrates clinical 3D ankle MRI applications.

BACKGROUND: The evaluation of midpalatal suture maturation is essential to undertake the most predictable maxillary expansion approach. Several factors, such as age, gender, and facial growth patterns, seem to be involved in midpalatal suture staging and, consequently, in its opening; however, the link between these variables and the stages of midpalatal suture development remains poorly understood. Our study aimed to analyse the midpalatal suture maturation in relation to age, sex, and skeletal growth patterns by CBCT.
METHODS: We enrolled 263 patients (119 males and 144 females) aged from 8 to 20 years. The midpalatal suture maturation was defined according to Angelieri et al.\'s classification using a low-dose CBCT. The chi-square test and linear regression were applied to investigate the suture stages by age, sex, and vertical and sagittal growth patterns.
RESULTS: Stage A was present in 8- and 9-year-olds with a larger prevalence in boys, while the prevalence of stage E increased progressively with age. Stage D was the most prevalent in our sample. The statistical analysis described that stage A was more likely in the youngest subjects, and stage E in the oldest participants. The males tended to have lower maturation stages. Moreover, the hypodivergent and normodivergent subjects tended to have higher maturation stages, while Class III was more likely in subjects in stages D or E.
CONCLUSIONS: A total of 127 patients were in stages A, B, and C, showing an unfused suture. In young individuals, the opening of the midpalatal suture leads to a proper facial growth development by correcting the transverse superior hypoplasia. The midpalatal sutural maturation classification was related to age, sex, and divergence.

BACKGROUND: This study aimed to assess the effect of Low-Level Laser Therapy (LLLT) on sagittal, transverse and vertical Orthodontic miniscrew displacement.
METHODS: The study included CBCTs from the records of 12 adult patients who underwent upper first premolar extraction and canine retraction with orthodontic miniscrews for maximum anchorage. The miniscrews on one side received LLL, while the other side served as a control. The Low-Level Laser was applied to assess its effect on the displacement of the miniscrews. The used CBCTs have been taken at two-time points: immediately after miniscrew insertion (T0) and four months after the start of canine retraction (T1) with a total of 24 CBCTs. Miniscrew displacement was assessed by measuring head (HMS) and tail (TMS) displacement to the axial, coronal and mid-sagittal planes on the CBCT at the two time points. Miniscrews displacement (T1-T0) was compared between LLL side and control side. Comparisons were performed using paired samples t-test. The significance level was set at p-value < 0.05. The reproducibility of measurements was assessed by intraclass correlation coefficient (ICC).
RESULTS: After four months of canine retraction, HMS and TMS from both laser and control sides showed significant three-dimensional displacement at p < 0.05. No significant difference in mean displacement in the vertical, sagittal, nor transverse planes between both sides was elicited.
CONCLUSIONS: LLL application in the used protocol does not affect the amount of miniscrew displacement in any of the three planes of space. Miniscrew displacement was significant in both groups.

Embryology is an essential component to understanding human anatomy. It requires an in-depth understanding of 3D knowledge but is primarily taught with 2-dimensional resources. In particular, the development of the human heart is a complex process and difficult to understand using traditional teaching methods. We present here a series of heart embryology models created to supplement embryology education and aid students in understanding this complex process. Using Polydoh moldable plastic, models representing six different critical steps in heart formation are described, including: the fusing of the heart tubes (days 21-23), beginning of the cardiac loop (early day 23), fully formed cardiac loop (late day 23), four-week heart, formation of the endocardial cushions and septi (late fourth week), and heart with fully formed septi with functioning foramen ovale (sixth week). These models not only improve embryology education but also the understanding of heart pathologies. This method provides an affordable option for embryology education and provides students with learning tools that assist with the comprehension of the development of a complex organ.

OBJECTIVE: Quantitative MRI enables direct quantification of contrast agent concentrations in contrast-enhanced scans. However, the lengthy scan times required by conventional methods are inadequate for tracking contrast agent transport dynamically in mouse brain. We developed a 3D MR fingerprinting (MRF) method for simultaneous T1 and T2 mapping across the whole mouse brain with 4.3-min temporal resolution.
METHODS: We designed a 3D MRF sequence with variable acquisition segment lengths and magnetization preparations on a 9.4T preclinical MRI scanner. Model-based reconstruction approaches were employed to improve the accuracy and speed of MRF acquisition. The method\'s accuracy for T1 and T2 measurements was validated in vitro, while its repeatability of T1 and T2 measurements was evaluated in vivo (n = 3). The utility of the 3D MRF sequence for dynamic tracking of intracisternally infused gadolinium-diethylenetriamine pentaacetic acid (Gd-DTPA) in the whole mouse brain was demonstrated (n = 5).
RESULTS: Phantom studies confirmed accurate T1 and T2 measurements by 3D MRF with an undersampling factor of up to 48. Dynamic contrast-enhanced MRF scans achieved a spatial resolution of 192 × 192 × 500 μm3 and a temporal resolution of 4.3 min, allowing for the analysis and comparison of dynamic changes in concentration and transport kinetics of intracisternally infused Gd-DTPA across brain regions. The sequence also enabled highly repeatable, high-resolution T1 and T2 mapping of the whole mouse brain (192 × 192 × 250 μm3) in 30 min.
CONCLUSIONS: We present the first dynamic and multi-parametric approach for quantitatively tracking contrast agent transport in the mouse brain using 3D MRF.

BACKGROUND: Posttreatment changes after orthodontic treatment are challenging. One of the main reasons for such a phenomenon is the lack of patient compliance with removable retainers especially in the maxillary arch, due to palatal coverage, deterioration of speech, decreased masticatory efficiency, and loss of retainers. Fixed retainers have been introduced to overcome patient compliance and provide longer stable results. However, teeth still show movements when a six-unit fixed retainer is in place. Thus, in this study, an eight-unit fixed retainer was evaluated in an attempt to eliminate unwanted movements. THE AIM OF THIS RESEARCH: was to assess short-term positional changes associated with an eight-unit extended maxillary fixed retainer.
METHODS: A single-arm clinical trial was conducted to address the aim of the study. This research was approved by the institutional review board of the Faculty of Dentistry, Alexandria University (IORG:0008839, No-0479-8/2022). The registration date of this study was 5/06/2023. Twenty-eight patients (19.8 ± 4.5 years) who had finished the active orthodontic phase and started retention had an eight-unit extended maxillary fixed retainer that was bonded to the palatal surface of the maxillary incisors, canines, and the first premolars or the second premolars. Pre-retention and one-year post-retention intra-oral scans were made to produce STL files that were superimposed to determine the amount of tooth change. Additionally, analysis of digital casts and lateral cephalometric radiographs was performed.
RESULTS: Statistically significant changes in all planes and the rotation of teeth after one year of retention were found. The upper right lateral incisor exhibited the most evident change in the vertical plane, while the upper right central incisor exhibited the greatest change overall. Minimal changes in the cast measurements were observed. Lateral cephalometric measurements showed minimal changes after one year of retention, and these changes were not statistically significant except in the interincisal angle and the angle between the upper incisor and the line connecting the A-point to the pogonion.
CONCLUSIONS: Increasing the extension of maxillary fixed retainers did not eliminate unwanted tooth movement in the first year of retention.

BACKGROUND: Temporal bone dissection is overwide recognized as an ideal training method for otologic surgeons. The knowledge of temporal bone anatomy and especially of the course of infratemporal facial nerve is pivotal in practice. The 3D exoscope is an innovative and promising tool, that was recently introduced in ear surgery.
METHODS: A high-definition 3D exoscope (3D VITOM®) mounted on the VERSACRANETM holding system (Karl Storz) was used to perform two temporal bone dissection, with the aim to study the anatomy of infratemporal facial nerve. The 3D endoscope (TIPCAM®1 S 3D ORL, Karl Storz) was used in combination to provide a close-up high-quality view and to provide a different angle of view on fine anatomical relationships.
RESULTS: The high-definition 3D exoscope allowed to conduct the dissection with high quality visualization and to share the same surgical field with trainees. Moreover, it showed a high interchangeability with the 3D endoscope.
CONCLUSIONS: 3D 4 K Exo-endoscopic temporal bone dissection seems to have benefits in terms of educational purpose, especially concerning anatomy understanding. The superiority in teaching value of this tool should be further investigated in cohort studies.

UNASSIGNED: Right ventricle-pulmonary arterial (RV-PA) coupling is considered the gold standard for assessing right ventricular (RV) function and can be evaluated noninvasively by echocardiography. The ratios of tricuspid annular plane systolic excursion/pulmonary artery systolic pressure (TAPSE/PASP), RV global longitudinal strain (G-RVLS)/PASP, and stroke volume/end-systolic volume (SV/ESV) have been proposed as surrogates of RV-PA coupling. The relationship of these parameters remains incompletely understood in patients with volume and pressure loading conditions. We aimed to compare these parameters and evaluate their relationship with 3D RV data in patients with RV pressure and volume overload.
UNASSIGNED: This study was performed on 110 individuals who underwent 2D and 3D echocardiography. Fifty-four patients had RV volume overload (atrial septal defect (ASD) group), 34 patients had RV pressure overload (pulmonary hypertension (PH) group), and 22 were controls. TAPSE/PASP, G-RVLS/PASP and SV/ESV ratios were calculated. Correlations between parameters of RV-PA coupling and 3D data were assessed using general linear mixed models.
UNASSIGNED: Compared with the ASD group, the PH group had lower TAPSE/PASP and G-RVLS/PASP ratios. The SV/ESV ratio had a strong correlation with right ventricle ejection fraction (RVEF) in both ASD and PH patients (r = 0.8703, p < 0.001 and r = 0.9388, p < 0.001, respectively). The G-RVLS/PASP ratio showed a strong or moderately negative relationship with end-diastolic volume (EDV), ESV and SV (r = -0.7768, p = 0.001; r = -0.7327, p = 0.0005 and r = -0.6816, p = 0.0018, respectively) in PH patients. The TAPSE/PASP ratio showed moderately negative correlations with EDV and ESV (r = -0.5712, p = 0.0012 and r = -0.5594, p = 0.0016, respectively) in PH patients.
UNASSIGNED: Non-invasive RV-PA coupling parameters derived from echocardiography appear similar, but not identical to profiles in pressure-overloaded and volume-overloaded patients. The correlations between non-invasive RV-PA coupling parameters and 3D data displayed various degrees of correlation.