The formulation and delivery of macromolecules through the oral route pose considerable challenges due to factors such as large molecular weight, pH sensitivity, and limited formulation approaches. This challenge is compounded if the drug is poorly permeable, necessitating innovative drug delivery strategies. Vancomycin, a widely prescribed glycopeptide antibiotic, has an oral bioavailability of less than 10%, leading to predominantly intravenous administration and potential patient discomfort. This study explores the potential of the buccal route as a non-invasive, highly vascularised alternative route of administration, offering a rapid onset of action while bypassing the first-pass metabolism. In this study, vancomycin was coated with L-glutamic acid using an isothermal dry particle coater to modulate permeation through the buccal cell line, TR146. Results confirm significant impact of both amino acid concentration and dry particle coating on the rate and extent of drug permeability. With the introduction of L-glutamic acid and utilisation of the isothermal dry particle coater, vancomycin\'s permeation profile increased six-fold compared to the control due to the formation of drug ion-pair complex. Imaging studies showed the presence of layered micronized glutamic acid particles on the surface of dry coated vancomycin particles which confirms the role of dry coating and amino acid concentration in modulating drug permeation. Microbiology experiments in Staphylococcus aureus, minimum inhibitory concentration and biofilm disruption studies, provided confirmatory evidence of antimicrobial activity of dry coated glutamic acid-vancomycin ion pair particulate structure. This study demonstrates, for the first-time, buccal delivery of dry coated large molecule drug, vancomycin, through controlled deposition of amino acid using innovative particle coating strategy.

Connexin hemichannels were identified as the first members of the eukaryotic large-pore channel family that mediate permeation of both atomic ions and small molecules between the intracellular and extracellular environments. The conventional view is that their pore is a large passive conduit through which both ions and molecules diffuse in a similar manner. In stark contrast to this notion, we demonstrate that the permeation of ions and of molecules in connexin hemichannels can be uncoupled and differentially regulated. We find that human connexin mutations that produce pathologies and were previously thought to be loss-of-function mutations due to the lack of ionic currents are still capable of mediating the passive transport of molecules with kinetics close to those of wild-type channels. This molecular transport displays saturability in the micromolar range, selectivity, and competitive inhibition, properties that are tuned by specific interactions between the permeating molecules and the N-terminal domain that lies within the pore-a general feature of large-pore channels. We propose that connexin hemichannels and, likely, other large-pore channels, are hybrid channel/transporter-like proteins that might switch between these two modes to promote selective ion conduction or autocrine/paracrine molecular signaling in health and disease processes.

Hydrogen diffusion and uptake in nickel Alloy 625 under cathodic protection potential (-1050 mVAg/AgCl) and temperature (10 °C) were studied using electrochemical permeation tests. It is the first time hydrogen permeation of nickel alloy at a temperature lower than room temperature was investigated. The results revealed that the effective diffusivity of hydrogen D eff at -1050 mVAg/AgCl varied from 1.81 to 2.86 × 10-15 m2/s across the temperature range of 10-23 °C. The effective subsurface hydrogen concentration C s u b was influenced by both the applied temperature and overpotential. Particularly, the change in C sub at 10 °C is dependent on the hydrogen absorption efficiency affected by the surface coverage fraction of hydrogen. Furthermore, the hydrogen fugacity on the sample surface f H 2 , the applied overpotential, and the temperature have been successfully cross correlated to interpret hydrogen evolution and adsorption. It was demonstrated that f H 2 primarily changed with the applied overpotential, while the temperature affected the gradient of f H 2 during the potential increment. The current study provides valuable insights for industries, assisting in the prediction of hydrogen absorption and hydrogen-assisted failures in subsea nickel alloy components.

Nose-to-brain delivery (NTBD) offering potential benefits for treating Alzheimer\'s disease. In previous research, insulin dry powder (IDP) formulation for NTBD was developed, exhibiting favorable stability. This study aims to conduct in vitro and ex vivo assessment of release, permeation, mucoadhesion and histopathology, as well as an in vivo biodistribution study to produce IDP for NTBD and evaluate brain biodistribution. Spray-freeze-dried IDP formulations with varying weight ratios of trehalose-to-inulin were produced and analyzed. The release study was carried out in PBS with a pH of 5.8 stirred at 50 rpm and maintained at 37 °C ± 0.5 °C. Goat nasal mucosa was used for ex vivo permeation and mucoadhesion testing under similar conditions. An ex vivo histopathological examination and an in vivo study using enzyme-linked immunosorbent assay, were also performed. The IDP dissolution study demonstrated complete release of all IDPs within 120 min. The permeation study indicated that steady-state conditions were observed between 30 and 240 min. The mucoadhesion study unveiled that IDP F5 exhibited the fastest mucoadhesion time and the least force required within the fastest time of 43.60 ± 2.57 s. The histopathological study confirmed that none of the tested IDPs induced irritation in the nasal mucosa. Furthermore, the biodistribution study demonstrated the absence of detectable insulin in the plasma, while IDP F3 exhibited the highest deposited concentration of insulin within both the olfactory bulb and the whole brain. The extensive evaluation of the IDP formulations through in vitro, ex vivo, and in vivo studies implies their strength non-invasive NTBD. IDP F3, with a 1:1 wt ratio of trehalose to inulin, exhibited favorable brain biodistribution outcomes and was recommended for further investigation and development in the context of NTBD.

Hydrogen atoms can enter into metallic materials through penetration and diffusion, leading to the degradation of the mechanical properties of the materials, and the application of hydrogen barrier coatings is an effective means to alleviate this problem. Zirconia coatings (ZrO2) have been widely studied as a common hydrogen barrier coating, but zirconia undergoes a crystalline transition with temperature change, which can lead to volumetric changes in the coating and thus cause problems such as cracking and peeling of the coating. In this work, ZrO2 coating was prepared on a Q235 matrix using a sol-gel method, while yttria-stabilized zirconia (YSZ) coatings with different contents of rare earth elements were prepared in order to alleviate a series of problems caused by the crystal form transformation of ZrO2. The coating performances were evaluated by the electrochemical hydrogen penetration test, pencil hardness test, scratch test, and high-temperature oxidation test. The results show that yttrium can improve the stability of the high-temperature phase of ZrO2, alleviating the cracking problem of the coating due to the volume change triggered by the crystalline transition; improve the consistency of the coating; and refine the grain size of the oxide. The performance of YSZ coating was strongly influenced by the yttria doping mass, and the coating with 10 wt% yttria doping had the best hydrogen barrier performance, the best antioxidant performance, and the largest adhesion. Compared with the matrix, the steady-state hydrogen current density of the YSZ coating decreased by 72.3%, the antioxidant performance was improved by 65.8%, and the ZrO2 coating hardness and adhesion levels were B and 4B, respectively, while YSZ coating hardness and adhesion were upgraded to 2H and 5B. With the further increase in yttrium doping mass, the hardness of the coating continued to improve, but the defects of the coating increased, resulting in a decrease in the hydrogen barrier performance, antioxidant performance, and adhesion. In this work, the various performances of ZrO2 coating were significantly improved by doping with the rare earth element, which provides a reference for further development and application of oxide coatings.

UNASSIGNED: \"Quality by Design\" (QbD) is a novel approach to product development that involves understanding the product and process, as well as the relationship between critical quality attributes (CQA) and critical process parameters (CPP). This study aimed to optimize the gabapentin-loaded solid lipid nanoparticle formulation (GP-SLN) using a QbD approach and evaluate in vitro and ex vivo performance.
UNASSIGNED: The GP-SLN formulation was created using the microemulsion method by combining Gelucire 48/16, Tween 80, and Plurol Oleique CC 497. The Box-Behnken experimental design was adopted to investigate the effects of independent factors on dependent factors. The GP-SLN formulation was assessed based on particle size and distribution, zeta potential, morphology, entrapment efficiency, release kinetics, permeation parameters, stability, and nasal toxicity.
UNASSIGNED: The nanoparticles had a cubical shape with a particle size of 185.3±45.6 nm, a zeta potential of -24±3.53 mV, and an entrapment efficiency of 82.57±4.02%. The particle size and zeta potential of the GP-SLNs remained consistent for 3 months and followed Weibull kinetics with a significantly higher ex vivo permeability (1.7 fold) than a gabapentin solution (GP-SOL). Histopathology studies showed that intranasal administration of the GP-SLN formulation had no harmful effects.
UNASSIGNED: The current study reports the successful development of a GP-SLN formulation using QbD. A sustained release of GP was achieved and its nasal permeability was increased. Solid lipid nanoparticles with optimum particle size and high entrapment efficiency may offer a promising approach for the intranasal delivery of drugs.

UNASSIGNED: Curcumin, known for its anti-inflammatory properties, was selected for the developing consumer friendly film forming spray that offers precise delivery of curcumin and and improves patient adherence.
UNASSIGNED: An optimized film-forming solution was prepared by dissolving curcumin (1%), Eudragit RLPO (5%), propylene glycol (1%), and camphor (0.5%) in ethanol: acetone (20:80) as the solvent. The solution was filled in a spray container which contained 70% solutions and 30% petroleum gas. In-vitro characterization was performed.
UNASSIGNED: Potential anti-inflammatory phytoconstituents were extracted from the PubChem database and prepared as ligands, along with receptor molecules (nsp10-nsp16), for molecular docking using Autodock Vina. The docking study showed the lowest binding energy of -8.2 kcal/mol indicates better binding affinities. The optimized formulation consisted of ethanol:acetone (20:80) as the solvent, Eudragit RLPO (5%) as the polymer, propylene glycol (1%) as the plasticizer, and camphor oil (0.5%) as the penetration enhancer. The optimized formulation exhibited pH of 5.8 ± 0.01, low viscosity, low film formation time (19.54 ± 0.78 sec), high drug content (8.243 ± 0.43 mg/mL), and extended ex vivo drug permeation (85.08 ± 0.09%) for nine hours. Consequently, the formulation was incorporated into a container using 30% liquefied petroleum gas, delivering 0.293 ± 0.08 mL per actuation, containing 1.53 ± 0.07 mg of the drug. The film-forming spray exhibited higher cumulative drug permeation (83.94 ± 0.34%) than the marketed cream formulation and pure drug solution after 9 h, with an enhancement ratio of 14. Notably, the film-forming spray exhibited no skin irritation and remained stable for over three months.
UNASSIGNED: The developed curcumin film-forming system is promising as a carrier for wound management because of its convenient administration and transport attributes. Further in vivo studies are required to validate its efficacy in wound management.

Lidocaine is the most commonly used local anesthetic worldwide, known for its rapid onset and moderate duration of anesthesia. However, it is short-lived and does not effectively promote effective topical anesthesia in the oral cavity when used alone. Our aim was to investigate whether an approximate 50% encapsulation of lidocaine in poly(ε-caprolactone) nanocapsules (LDC-Nano) would be able to increase its permeation and analgesic efficacy and reduce cytotoxicity. In this study, we characterized LDC-Nano and conducted MTT tests with HaCaT cells to assess their in vitro cytotoxicity. Additionally, in vitro permeation assays across the pig esophageal epithelium and the anesthetic efficacy of the hind paw incision model in rats were performed. Plain lidocaine (LDC) was compared with LDC-Nano and lidocaine hydrochloride plus epinephrine (LDC-Epi). The physicochemical characteristics of LDC-Nano were satisfactory (pH: 8.1 ± 0.21; polydispersity index: 0.08 ± 0.01; mean diameter (nm): 557.8 ± 22.7; and encapsulation efficiency (%): 51.8 ± 1.87) and remained stable for up to 4 months. LDC-Nano presented similar in vitro cytotoxicity to LDC but was higher than LDC-Epi (LD50: LDC = 0.48%; LDC-Nano = 0.47%; and LDC-Epi = 0.58%; p < 0.0001). Encapsulation increased the permeability coefficient about 6.6 times and about 7.5 the steady-state flux of lidocaine across the mucosal epithelium. Both encapsulation and epinephrine improved anesthesia duration, with epinephrine demonstrating superior efficacy (100% of animals were anesthetized up to 100, 30, and 20 min when LDC-Epi, LDC-nano, and LDC were used, respectively). Although LDC-Epi demonstrated superior in vivo anesthetic efficacy, the in vitro permeation and cytotoxicity of LDC-Nano indicate promising avenues for future research, particularly in exploring its potential application as a topical anesthetic in the oral cavity.

The purpose of this study was to enhance the topical delivery of 5-Fluorouracil (5-FU), a cancer treatment, by developing a nanoemulgel formulation. Glycyrrhizin (GLY), a natural penetration enhancer has been investigated to exhibit synergistic effects with 5-FU in inhibiting melanoma cell proliferation and inducing apoptosis, Hence, GLY, along with suitable lipids was utilized to create an optimized nanoemulsion (NE) based gel. Solubility studies and ternary phase diagram revealed isopropyl myristate (IPM), Span 80, Tween 80 as Smix and Transcutol P as co-surfactant. IPM demonstrates excellent solubilizing properties facilitates higher drug loading, ensuring efficient delivery to the target site.,The optimized formulation consisting of 40 % IPM, 30 % of mixture of Tween80: Span80 (Smix) and 15 % Transcutol P provides with a nanometric size of 64.1 ± 5.13 nm and drug loading of 97.3 ± 5.83 %. The optimized formulation observed with no creaming and breakeing of NE and found thermodynamically stable during different stress conditions (temperatures of 4.0 °C and 45.0 °C) and physical thawing (-21.0 ± 0.50 °C to 20.0 ± 0.50 °C). The NE was then transformed into a nanoemulgel (NEG) using 1.5 % w/w Carbopol base and 0.1 % w/w glycyrrhizin. The ex vivo permeability studies showed significant enhancements in drug permeability with the GLY-based 5-FU-NEG formulation compared to pure 5-FU gel in excised pig skin upto1440 min in PBS 7.4 as receptor media. The IC50 values for Plain 5-FU gel, 5-FU-NEG, and GLY-based 5-FU-NEG were found to be 20 µg/mL, 1.1 µg/mL, and 0.1 µg/mL, respectively in B16F10 cell lines. The percentage intracellular uptake of GLY-5-FU-NEG and 5-FU-NEG was found to be 44.3 % and 53.6 %, respectively. GLY-based 5-FU-NEG formulation showed alterations in cell cycle distribution, in compared to 5-FU-NE gel. The overall findings suggest that the GLY-based 5-FU-NEG holds promise for improving anti-melanoma activity.

The carboxysome is a bacterial microcompartment (BMC) which plays a central role in the cyanobacterial CO2-concentrating mechanism. These proteinaceous structures consist of an outer protein shell that partitions Rubisco and carbonic anhydrase from the rest of the cytosol, thereby providing a favorable microenvironment that enhances carbon fixation. The modular nature of carboxysomal architectures makes them attractive for a variety of biotechnological applications such as carbon capture and utilization. In silico approaches, such as molecular dynamics (MD) simulations, can support future carboxysome redesign efforts by providing new spatio-temporal insights on their structure and function beyond in vivo experimental limitations. However, specific computational studies on carboxysomes are limited. Fortunately, all BMC (including the carboxysome) are highly structurally conserved which allows for practical inferences to be made between classes. Here, we review simulations on BMC architectures which shed light on (1) permeation events through the shell and (2) assembly pathways. These models predict the biophysical properties surrounding the central pore in BMC-H shell subunits, which in turn dictate the efficiency of substrate diffusion. Meanwhile, simulations on BMC assembly demonstrate that assembly pathway is largely dictated kinetically by cargo interactions while final morphology is dependent on shell factors. Overall, these findings are contextualized within the wider experimental BMC literature and framed within the opportunities for carboxysome redesign for biomanufacturing and enhanced carbon fixation.