Human health hazards appear in wine production. Wineries have implemented food safety management systems to control food hazards through Hazard Analysis Critical Control Point (HACCP). Wine-making industry applies HACCP by evaluating Critical Control Points (CCPs). One of the CCPs that exhibits inadequate control is the potential contamination risk of arsenic, cadmium, and lead throughout the winemaking procedure. Wineries performance level about controlling CCPs related to contamination risk by arsenic, cadmium and lead in the winemaking were analyzed. A sixteen-question questionnaire was made to achieve this research. Three indicators were calculated for training, legislation, and analysis performance components in CCPs control. Results revealed that wineries fault in analysis and legislation components. Identification and updating of legislation about As, Cd and Pb contamination risk is in starting performance level for wineries that produce less than 250,000 L/year wineries. Analysis performance level is even lower than legislation. Only one out of every three wineries possess information regarding the concentrations of arsenic, cadmium, and lead in the soils of vineyards where grapes are cultivated. Furthermore, the availability of data on their available concentrations in the soil solution is even more limited. Those wineries that controlled As, Cd and Pb concentrations make it according to official recommendations using techniques based on atomic absorption spectrometry. However, there is a lack of this spectrometry equipment in the wineries own laboratories.

Improperly practiced postharvest procedures can pose mycotoxin-related risks during medicinal herb production. As a health food material with pharmacological activities, Angelicae Gigantis Radix (AGR) has been extensively used in oriental medicine or functional foods. Compared with the official protocol, conventional practices were investigated for provisional critical control points (CCPs) in terms of ochratoxin A (OTA) contamination. Conventional practices include field-drying, which was associated with increased fungal exposure. Compared with conventional methods, the washing process in the official protocol was not advantageous for reducing OTA contamination in final products. Instead, drying was examined to assess the fungal growth risk during AGR production. To reduce the energy cost, product overload and shortened drying time could lead to failure in controlling fungal overgrowth and subsequent OTA production. In particular, inner parts of the load contained a higher OTA content than outer parts close to the heat outlet of the dryer. Improper thermal drying of loads allowed the growth of ochratoxigenic species during AGR production. Collectively, non-field-drying and optimally loaded thermal drying are easy preventive actions in key CCPs that need to be well maintained to attenuate any further microbial risk. These assessments provide insights into good practice-based mycotoxin risk management in producing herbal medicinal crops and new cost-efficient appropriate interventions for small-scale farms.

UNASSIGNED: Enterohemorrhagic Escherichia coli (O157:H7) is the primary cause of bloody diarrhea or hemorrhagic colitis. The study was carried out with to determine the epidemiology and antimicrobial resistance pattern of E. coli O157:H7 along the dairy supply chains in Akaki Kaliti sub-city of Addis Ababa, Bishoftu and Sululta towns of central Ethiopia.
UNASSIGNED: A cross-sectional study design with random sampling methods was employed. Thus, a total of 450 raw cow milk (294), milker hand swab (65) and water (91) samples were collected from dairy farms, milk collection centers and Cafeterias and processed according to the standards to isolate and identify E. coli O157:H7. The samples were initially enriched in buffered peptone water, then plated onto Sorbitol MacConkey agar. Consequently, the suspected non-sorbitol fermenting colonies were confirmed as E. coli biochemically and serological test using latex agglutination tests.
UNASSIGNED: Out of the total 450 samples examined, 6.0% were found to be contaminated by E. coli O157:H7. Accordingly, 9.89% of water, 9.23% of milker hand swab and 4.08% of raw milk samples were contaminated by the pathogen. Furthermore, the prevalence of E. coli O157:H7 was 7.79%, 6.21% and 3.97% in Akaki kaliti sub-city, Sululta and Bishoftu towns, respectively. The result of Fisher exact analysis revealed a significant difference observed (p < 0.05) between the occurrence of the pathogen and the source of sample, sources of water used, sampled material and type of containers. The study also revealed that varying level of resistance of E. coli O157:H7 isolates against nine antimicrobial discs tested and 100% (n = 27) of the isolates showed multidrug-resistance comprising from two up to seven antimicrobial drugs.
UNASSIGNED: In conclusion, this study has indicated the occurrence of E. coli O157:H7 and its multiple drug-resistant profiles in milk samples along the dairy supply chains and its risk to public health and food safety. Therefore, proper hygienic practices from dairy farms to fork and rational drug usage are recommended.

Food manufacturers are required to obtain scientific and technical evidence that a control measure or combination of control measures is capable of reducing a significant hazard to an acceptable level that does not pose a public health risk under normal conditions of distribution and storage. A validation study provides evidence that a control measure is capable of controlling the identified hazard under a worst-case scenario for process and product parameters tested. It also defines the critical parameters that must be controlled, monitored, and verified during processing. This review document is intended as guidance for the food industry to support appropriate validation studies, and aims to limit methodological discrepancies in validation studies that can occur among food safety professionals, consultants, and third-party laboratories. The document describes product and process factors that are essential when designing a validation study, and gives selection criteria for identifying an appropriate target pathogen or surrogate organism for a food product and process validation. Guidance is provided for approaches to evaluate available microbiological data for the target pathogen or surrogate organism in the product type of interest that can serve as part of the weight of evidence to support a validation study. The document intends to help food manufacturers, processors, and food safety professionals to better understand, plan, and perform validation studies by offering an overview of the choices and key technical elements of a validation plan, the necessary preparations including assembling the validation team and establishing prerequisite programs, and the elements of a validation report.

Hazard analyses were conducted at several cooked food vending operations in a large city in Zambia, near a downtown bus park and at a large market. Samples of raw, processed, and cooked foods sold on streets or by small food shops were collected and tested for common foodborne pathogens and indicator organisms. Results showed that some raw foods (ground meat, chicken, chicken intestine) or processed foods (dried minnows; kapenta) were contaminated by salmonellae or contained high populations of Staphylococcus aureus (pasteurized milk) or Bacillus cereus (caterpillars). Cooking usually gave time-temperature exposures that would have been lethal for vegetative forms of foodborne pathogens. Holding of foods other than nshima often provided time-temperature exposures conducive to microbial growth, particularly in foods held overnight. Large populations of aerobic mesophilic organisms, thermotolerant coliform bacteria, and sometimes Escherichia coli were recovered from these foods. Ten million Clostridium peifringens per gram were isolated from a sample of leftover beef stew. Large populations (> 105) of S. aureus were recovered from a sample of leftover chicken, and large populations of B. cereus (> 107) were isolated from leftover rice. Time-temperature exposures during reheating had variable effects in terms of killing the microorganisms that germinated from surviving spores or that reached the foods after cooking, but heat-stable toxins would not have been inactivated.

Decision trees have been used as an aid to selection of critical control points as part of the development of hazard analysis critical control point (HACCP) systems. The background for those in existence is described. Another decision-tree approach that follows the logic in the IAMFES manual Procedures to Implement the Hazard Analysis Critical Control Point Approach is presented. It takes into consideration impending hazards, the effect of actions exercised at the operation in question, whether control actions should be taken at this or subsequent operations and whether the CCP will be monitored and corrections made. Further, guidelines are given for selecting an operation as a critical control point. A decision tree to aid in the evaluation of risks is presented, considering whether illness will result, the severity of the illness and the likely occurrence of this outcome, based upon epidemiologic or challenge study of related events. These decision trees provide additional tools to aid in the development of HACCP systems.