OBJECTIVE: Autologous osteoperiosteal transplantation (AOPT) is one of the most feasible and effective techniques for cystic osteochondral lesions of the talus (OLT). However, few reports have been reported about the process of graft-host bone healing and bone articular surface reconstruction, which help us to further understand the actual situation of bone healing and modify surgical methods.
METHODS: We retrospectively evaluated 33 osteochondral lesions in 30 patients undertaking AOPT for OLT with subchondral cysts from December 2016 to October 2021. According to CT observation, we used 4 variables to describe the bony articular repair, including the integration of the articular surface, the height of the bone filling, the status of bone union, and the appearance of bone resorption or cystic change. We also analyzed the demographic data and clinical function. Descriptive statistics were used for demographic and clinical variables. Normally distributed data were presented as mean ± SD, and non-normally distributed data were presented as median (Q1, Q3). Associations between these variables and the primary clinical outcomes were examined using t-test or one-way ANOVA test for continuous variables.
RESULTS: The patients\' mean age was (41.7 ± 14.0) years old and the mean follow-up time was (29.6 ± 17.8) months. The chondral lesion size was (14.3 ± 4.1) mm. The cyst depth was (10.9 ± 3.7) mm. Significant improvements were observed in functional outcomes (according to the numeric rating scale for pain when walking and the American orthopedic foot and ankle society score) between the preoperative and latest follow-up evaluations, from 4.2 ± 2.1 to 2.2 ± 2.0 (p < 0.001), and from 66.8 ± 12.9 to 83.2 ± 10.4, respectively (p < 0.001). The overall satisfaction reached 8.3 of 10 points. All patients returned to sports and their median daily steps reached 8000 steps with 27 (81.8%) patients walking over 6000 steps daily. According to CT observation, \"discontinuous bony articular surface and gap > 1 mm\" was found in 27 grafts (81.8%), and \"below the level of the adjacent articular surface, ≤ 1 mm\" in a third of the grafts. Abnormal height of bone filling affected numeric rating scale score (p = 0.049) and American Orthopedic Foot and Ankle Society score (p = 0.027). Of note, bone resorption or cystic changes appeared in up to 13 autografts (39.4%).
CONCLUSIONS: AOPT is an effective and acceptable technique for cystic OLT. Bone reconstruction is essential for large cystic OLT. How to get better bony articular reconstruction and avoid cyst recurrence should still be paid more attention.

OBJECTIVE: This study aimed to evaluate the hypothesis that the utilization of percutaneous screw guides enhances the precision of screw placement in the surgical fixation of talar fractures.
METHODS: Computed tomography (CT) scans of ankle joints were obtained from 40 healthy adults and 10 cadaveric specimens between April 2019 and August 2020 at Ningbo No. 6 Hospital. The acquired CT data were imported into Materialise Interactive Medical Image Control System (MIMICS) software for processing. Three-dimensional (3D) digital models of the ankle joints were reconstructed, and relevant anatomical parameters were measured. A percutaneous screw guide (PSG) was designed and fabricated to facilitate accurate screw placement in the posterior talar process. Ten eligible cadaveric ankle joints were selected for further analysis and their 3D models were reconstructed using the MIMICS software. Screw trajectory parameters were then measured and analyzed based on these cadaveric models, forming the model group for comparative analyses. Ten cadaveric specimens were utilized in this study, equally divided into two groups: a guider group (n = 5) and a free-hand group (n = 5). In the guider group, talar posterior process screws were inserted using percutaneous screw guidance. In the free-hand group, screws were inserted into the talar posterior process without guidance. Post-operative CT scans were performed on all specimens. The following parameters were quantitatively compared between the two groups: screw trajectories, entry point distances in specimens with preselected screws, entry point distance trajectories in the 3D model, operation time, frequency of fluoroscopic imaging, and number of drilling attempts.
RESULTS: Following the generation of the 3D models from 10 cadavers, a virtual screw was digitally inserted into each model. In the model group, the preselected screw trajectory was oriented towards the medial aspect of the talar neck base, with a cephalad inclination angle (CIA) of 3.1° ± 1.5° in the transverse~plane and a medial diverge angle (MDA) of 12.0° ± 1.4° in the coronal plane. The CIA and MDA of the screw trajectory in the guider group were 2.1° ± 1.7° and 11.2° ± 1.6°, respectively, whereas the CIA and MDA in the free-hand group were 6.0° ± 2.2° and 18.8° ± 1.6°, respectively. Statistical analysis revealed significant differences in both CIA and MDA between the two groups (p < 0.05). Furthermore, the guider group yielded superior outcomes in terms of entry point distance, operation time, fluoroscopic exposure time, and number of drilling attempts compared to the free-hand group (p < 0.05).
CONCLUSIONS: Percutaneous screw guidance can improve the accuracy and safety of the posterior process of the talar screws, which can be feasible for percutaneous fixation. Further studies are required to confirm the efficacy and clinical outcomes of percutaneous screw guidance.

Background: To investigate the search for an Iliac-Talar Grafts on the iliac bone that is morphologically matched to a multiplanar injury lesion of the talus; while utilizing a bone-harvesting guide to ensure precise positioning of the Iliac-Talar Grafts. Methods: A total of twenty-two cases with both talar CT data and iliac CT data were collected from January 2019 to June 2023. One case each of talar deformity injury and bone disease were excluded, resulting in a selection of 20 cases. The medial and lateral target repair areas of the talus were formulated, and virtual surgery was performed by using digital orthopedic technology to locate an iliac-talar restoration on the iliac bone that matched the morphology of the multiplanar injury lesion of the talus. 3D chromatographic deviation analysis was used to assess the accuracy of Iliac-Talar Grafts in terms of morphometric matching and positioning, while personalized iliac bone extraction guides were designed to ensure accurate positioning of the Iliac-Talar Grafts. Results: The best fitting point for repairing the medial talar lesion is determined to be medial to the anterior iliac crest, specifically 2.935 ± 0.365 cm posterior to the anterior superior iliac spine, and 2.550 ± 0.559 cm anterior to the valgus-iliac crest point (VICP). Similarly, for the repair of the lateral talar lesion, the ideal position is found to be lateral to the posterior iliac crest, approximately 2.695 ± 0.640 cm posterior to the valgus-iliac crest point (VICP). Utilizing bone extraction guides enables precise positioning for iliac bone extraction. Conclusion: This study utilizes virtual surgery, 3D chromatographic deviation analysis, and guide plate techniques in digital orthopedics to precisely locate the Iliac-Talar Graft on the iliac bone, matching the morphology of the talar lesion; it provides a new solution for cutting the iliac bone implant that matches the the multifaceted talar lesion to be repaired.

Anterior talofibular ligament injuries and osteochondral lesions of the talus present unique challenges to orthopedic surgeons. This study aimed to investigate the relevant relationship between them by analyzing the Magnetic resonance imaging (MRI) results of clinical patients and single-cell RNA sequence (scRNA seq) results of healthy talus cartilage to discuss the risk factors. Data from 164 patients from 2018 to 2023 was retrospectively analyzed. The correlation analysis between ATFL injury grade and the Hepple stage of OLT determined by MRI was performed. Publicly available single-cell RNA datasets were collected. Single-cell RNA datasets from five volunteers of healthy talus cartilage were analyzed. ATFL injury grade was relevant with the Hepple stage of OLT (P < 0.05). The results of multivariate logistic regression analysis showed that injured area was the independent influencing factor of the incidence rate and the severity of OLT (P < 0.05). The Hepple stage of OLT was relevant with AOFAS and VAS (P < 0.05). Single-cell RNA sequence results showed that among the 9 subtypes of chondrocytes, the interaction strength between HTC-A and HTC-B is the highest. Their physical interactions are mainly achieved through the CD99 signaling pathway, and factor interactions are mainly achieved through the ANGPTL signaling pathway. Anterior talofibular ligament injury may lead to osteochondral lesions of the talus. Early medical intervention should be carried out for ligament injuries to restore joint stability and avoid cartilage damage.

OBJECTIVE: The purpose of this study was to study the effects of the severity of preoperative bone marrow oedema (BME) on the postoperative short-term outcomes following bone marrow stimulation (BMS) for osteochondral lesions of the talus (OLTs) and to propose a new metric that combines volume and signal density to evaluate BME.
METHODS: Sixty-five patients with symptomatic OLTs (<100 mm2) and preoperative BME, who received BMS in our institution from April 2017 to July 2021 with follow-ups of 3, 6 and 12 months, were analysed retrospectively. The area, volume and signal value of the BME were collected on preoperative magnetic resonance imaging. The enroled patients were divided into two groups according to the BME index (BMEI), which was defined as the product of oedema relative signal intensity and the relation of oedema volume to total talar volume. Visual analogue scale, American Orthopedic Foot and Ankle Society (AOFAS), Tegner, Foot and Ankle Ability Measure (FAAM)-activities of daily living (ADL) and Sports scores were assessed before surgery and at each follow-up. The relationship between the scores and the volume, relative signal intensity and BMEI was explored.
RESULTS: Sixty-five patients with preoperative BME were divided into the mild (n = 33) and severe (n = 32) groups based on the BMEI. A significant difference was found for each score with the general linear model for repeated measures through all follow-up time points (p < 0.001). For the preoperative and 12-month postoperative changes of the enroled patients, 53 patients (81.5%) exceeded the minimal clinically important difference of AOFAS and 26 (40.0%) exceeded that of FAAM-sports in this study. The mild group showed significantly more improvement in AOFAS scores at 12 months (89.6 ± 7.0 vs. 86.2 ± 6.2) and FAAM-ADL scores at 6 months (83.6 ± 7.6 vs. 79.7 ± 7.7) and 12 months (88.5 ± 8.5 vs. 84.4 ± 7.7) than the severe group (p < 0.05). No significant difference of all the scores between the groups was found at 3 months. No significant correlation was found in each group between BMEI and clinical outcomes.
CONCLUSIONS: The severity of the preoperative BME negatively affected short-term clinical outcomes following arthroscopic BMS for OLTs. Worse clinical outcomes were shown at postoperative 6 and 12 months in patients with a high preoperative BMEI, which could be a favourable parameter for assessing the severity of BME and assist in developing personalised rehabilitation plans and determining the approach and timing of surgery.
METHODS: Level III.

OBJECTIVE: The objective of this study was to provide a comprehensive review of the existing literature regarding the treatment of osteochondral lesions of the talus (OLT) using autologous matrix-induced chondrogenesis (AMIC), while also discussing the mid-long term functional outcomes, complications, and surgical failure rate.
METHODS: We searched Embase, PubMed, and Web of Science for studies on OLT treated with AMIC with an average follow-up of at least 2 years. Publication information, patient data, functional scores, surgical failure rate, and complications were extracted.
RESULTS: A total of 15 studies were screened and included, with 12 case series selected for meta-analysis and 3 non-randomized controlled studies chosen for descriptive analysis. The improvements in the Visual Analog Scale (VAS), the American Orthopaedic Foot & Ankle Society (AOFAS) ankle-hindfoot, and Tegner scores at the last follow-up were (SMD = - 2.825, 95% CI - 3.343 to  - 2.306, P < 0.001), (SMD = 2.73, 95% CI 1.60 to 3.86, P < 0.001), (SMD = 0.85, 95% CI 0.5 to 1.2, P < 0.001) respectively compared to preoperative values. The surgery failure rate was 11% (95% CI 8-15%), with a total of 12 patients experiencing complications.
CONCLUSIONS: The use of AMIC demonstrates a positive impact on pain management, functional improvement, and mobility enhancement in patients with OLT. It is worth noting that the choice of stent for AMIC, patient age, and OLT size can influence the ultimate clinical outcomes. This study provides evidences supporting the safety and efficacy of AMIC as a viable treatment option in real-world medical practice.

UNASSIGNED: Bone marrow stimulation (BMS) is presently considered first-line surgical treatment for osteochondral lesions of the talus (OLTs); however, some patients still experience pain or dysfunction after surgery, and the reasons for success or failure remain somewhat unclear. This study aimed to investigate the effect of smoking on postoperative outcomes after arthroscopic BMS for OLTs.
UNASSIGNED: Consecutive patients with OLTs who underwent BMS between January 2017 and January 2020 were included. Smokers were defined as patients who actively consumed cigarettes before surgery and postoperatively, whereas nonsmokers were patients who never smoked. Visual analog scale (VAS), American Orthopaedic Foot & Ankle Society ankle hindfoot score (AOFAS), Karlsson-Peterson, and Tegner scores were assessed preoperatively and at follow-up. Additionally, a general linear model (GLM) was performed, followed by the interaction analysis to explore the potential influence of smoking.
UNASSIGNED: The study enrolled 104 patients with a mean follow-up of 30.91 ± 7.03 months, including 28 smokers and 76 nonsmokers. There were no significant differences in patient age (35.2 ± 10.0 years vs 37.6 ± 9.7 years, P = .282) or OLT area (63.7 ± 38.7 mm2 vs 52.8 ± 37.0 mm2, P = .782). Both univariate analysis and GLM revealed that smoking was associated with worse postoperative pain levels, Karlsson-Peterson, and AOFAS scores (P < .05). The interaction analysis showed a significant interaction between smoking and OLT area for postoperative Karlsson-Peterson scores (general ankle function) (P = .031). Simple main effects analysis revealed that the negative effect of smoking on Tegner score significantly increased among patients >32 years old or with OLT area>50 mm2 (P < .05).
UNASSIGNED: Smoking was associated with worse clinical outcomes following BMS of OLTs. As the size of OLTs increased, the difference in general ankle function between smokers and nonsmokers also increased. Furthermore, smokers who were older than 32 years or had larger OLTs were less likely to resume participation in high-level activities.

BACKGROUND: Talar fractures often require osteotomy during surgery to achieve reduction and screw fixation of the fractured fragments due to limited visualization and operating space of the talar articular surface. The objective of this study was to evaluate the horizontal approach to the medial malleolus facet by maximizing exposure through dorsiflexion and plantarflexion positions.
METHODS: In dorsiflexion, plantarflexion, and functional foot positions, we respectively obtained the anterior and posterior edge lines of the projection of the medial malleolus on the medial malleolar facet. The talar model from Mimics was imported into Geomagic software for image refinement. Then Solidworks software was used to segment the medial surface of the talus and extend the edge lines from the three positions to project them onto the \"semicircular\" base for 2D projection. The exposed area in different positions, the percentage of total area it represents, and the anatomic location of the insertion point at the groove between the anteroposternal protrusions of the medial malleolus were calculated.
RESULTS: The mean total area of the \"semicircular\" region on the medial malleolus surface of the talus was 542.10 ± 80.05 mm2. In the functional position, the exposed mean area of the medial malleolar facet around the medial malleolus both anteriorly and posteriorly was 141.22 ± 24.34 mm2, 167.58 ± 22.36mm2, respectively. In dorsiflexion, the mean area of the posterior aspect of the medial malleolar facet was 366.28 ± 48.12 mm2. In plantarflexion, the mean of the anterior aspect of the medial malleolar facet was 222.70 ± 35.32 mm2. The mean overlap area of unexposed area in both dorsiflexion and plantarflexion was 23.32 ± 5.94 mm2. The mean percentage of the increased exposure area in dorsiflexion and plantarflexion were 36.71 ± 3.25% and 15.13 ± 2.83%. The mean distance from the insertion point to the top of the talar dome was 10.69 ± 1.24 mm, to the medial malleolus facet border of the talar trochlea was 5.61 ± 0.96 mm, and to the tuberosity of the posterior tibiotalar portion of the deltoid ligament complex was 4.53 ± 0.64 mm.
CONCLUSIONS: Within the 3D model, we measured the exposed area of the medial malleolus facet in different positions and the anatomic location of the insertion point at the medial malleolus groove. When the foot is in plantarflexion or dorsiflexion, a sufficiently large area and operating space can be exposed during surgery. The data regarding the exposed visualization area and virtual screws need to be combined with clinical experience for safer reduction and fixation of fracture fragments. Further validation of its intraoperative feasibility will require additional clinical research.

OBJECTIVE: The treatment of talar neck and/or body fractures is known to be difficult and challenging, with significant impact on the long-term functional outcome for the patient. The optimal management, including the choice of surgical approaches and implants, are still under constant discussion. The purpose of the study was to investigate the clinical effects of lateral mini-plate combined with medial lag screws for the treatment of complicated central talar fractures.
METHODS: The data of eight patients with complex central talus fractures treated between June 2019 and January 2021 were retrospectively analyzed. There were six males and two females, ranging in age from 15 to 66 years, with an average age of 37.4 years. There were three cases on the left and five cases on the right. All fractures were comminuted, including talar neck with talar body fracture in seven cases and talar body comminuted with subluxation of subtalar joint in one case. All patients were treated with the anteromedial combined anterolateral approach, lateral talar mini-plate fixation and medial lag screw fixation. Fracture reduction quality, union time, and complications were recorded, and functional outcomes were evaluated using the American Orthopedic Foot & Ankle Society (AOFAS) scoring system.
RESULTS: The time from injury to surgery was 1-6 days, with an average of 3.38 days. The follow-up period was 34-53 months (mean 44.88 months). All fractures healed with a mean healing time of 16.75 weeks (13-23 weeks). Anatomical reduction was observed in six cases and near in two cases. After operation, there was no loosening or breakage of implant, loss of fracture reduction, and irritation of skin and soft tissue by internal fixation. The average AOFAS score was 87.38 (48-100), with excellent five cases, good two cases and poor one case, and the excellent and good rate was 87.5%. Superficial skin necrosis in one surgical incision healed after dressing exchange. No deep infection occurred. One case (1/8, 12.5%) developed avascular necrosis of the talus without collapse. Posttraumatic arthritis was found in four cases (4/8, 50%).
CONCLUSIONS: The utilization of lateral mini-plates in combination with medial screws for treating complex central talar fractures results in satisfactory reduction and stable fixation, mitigating complications associated with poor reduction. However, due to the absence of an anatomical mini-plate, pre-contouring is necessary when applying the lateral plate. This demands a surgeon\'s thorough familiarity with the anatomical morphology of the talus and proficiency in surgical techniques. Posttraumatic arthritis is the most common complication of complex central talar fractures.

BACKGROUND: Talar malignant tumor is extremely rare. Currently, there are several alternative management options for talus malignant tumor including below-knee amputation, tibio-calcaneal arthrodesis, and homogenous bone transplant while their shortcomings limited the clinical application. Three-dimensional (3D) printed total talus prosthesis in talus lesion was reported as a useful method to reconstruct talus, however, most researches are case reports and its clinical effect remains unclear. Therefore, the current study was to explore the application of 3D printed custom-made modular prosthesis in talus malignant tumor.
METHODS: We retrospectively analyzed the patients who received the 3D printed custom-made modular prosthesis treatment due to talus malignant tumor in our hospital from February 2016 to December 2021. The patient\'s clinical data such as oncology outcome, operation time, and volume of blood loss were recorded. The limb function was evaluated with the Musculoskeletal Tumor Society 93 (MSTS-93) score, The American Orthopedic Foot and Ankle Society (AOFAS) score; the ankle joint ranges of motion as well as the leg length discrepancy were evaluated. Plain radiography and Tomosynthesis-Shimadzu Metal Artefact Reduction Technology (T-SMART) were used to evaluate the position of prosthesis and the osseointegration. Postoperative complications were recorded.
RESULTS: The average patients\' age and the follow-up period were respectively 31.5 ± 13.1 years; and 54.8 months (range 26-72). The medium operation time was 2.4 ± 0.5 h; the intraoperative blood loss was 131.7 ± 121.4 ml. The mean MSTS-93 and AOFAS score was 26.8 and 88.5 respectively. The average plantar flexion, dorsiflexion, varus, and valgus were 32.5, 9.2, 10.8, and 5.8 degree respectively. One patient had delayed postoperative wound healing. There was no leg length discrepancy observed in any patient and good osseointegration was observed on the interface between the bone and talus prosthesis in all subjects.
CONCLUSIONS: The modular structure of the prosthesis developed in this study seems to be convenient for prosthesis implantation and screws distribution. And the combination of solid and porous structure improves the initial stability and promotes bone integration. Therefore, 3D printed custom-made modular talus prosthesis could be an alternative option for talus reconstruction in talus malignant tumor patients.