Rechargeable aqueous zinc-ion batteries (AZIBs) are gaining recognition as promising next-generation energy storage solution, due to their intrinsic safety and low cost. Nevertheless, the advancement of AZIBs is greatly limited by the abnormal growth of zinc dendrites during cycling. Electrolyte additives are effective at suppressing zinc dendrites, but there is currently no effective additive screening criterion. Herein, we propose employing the interfacial electrostatic adsorption strength of zinc ions for the initial screening of additives. Subsequently, dendrite-free plating is achieved by employing the anionic surfactant sodium dodecyl benzenesulfonate (SDBS) to enhance electrostatic adsorption. The cycled zinc anode exhibited a dense plating morphology and a high (002) orientation (I002/I101 = 22). The Zn||MnO2 full cell with SDBS exhibited a capacity retention of 85% after 1000 cycles at 1 A g-1. Furthermore, an instantaneous nucleation model and continuous nucleation model (CNM) are constructed to reveal the microscale plating/stripping dynamics under the scenarios of weak adsorption and strong adsorption. The CNM accurately explains the self-optimizing reconstruction of electrodes resulting from enhanced electrostatic adsorption. Our exploration was extended to other anionic surfactants (sodium dodecyl sulfate and disodium laureiminodipropionate), confirming the effectiveness of strong electrostatic adsorption in the screening of electrolyte additives.

Some glycoside drugs can be transported through intestinal glucose transporters (IGTs). The surfactants used in oral drug preparations can affect the function of transporter proteins. This study aimed to investigate the effect of commonly used surfactants, Poloxamer 188 and Tween 80, on the drug transport capacity of IGTs. Previous studies have shown that gastrodin is the optimal drug substrate for IGTs. Gastrodin was used as a probe drug to evaluate the effect of these two surfactants on intestinal absorption in SD rats through pharmacokinetic and in situ single-pass intestinal perfusion. Then, the effects of the two surfactants on the expression of glucose transporters and tight-junction proteins were examined using RT-PCR and western blotting. Additionally, the effect of surfactants on intestinal permeability was evaluated through hematoxylin-eosin staining. The results found that all experimental for Poloxamer 188 (0.5%, 2.0% and 8.0%) and Tween 80 (0.1% and 2.0%) were not significantly different from those of the blank group. However, the AUC(0-∞) of gastrodin increased by approximately 32% when 0.5% Tween 80 was used. The changes in IGT expression correlated with the intestinal absorption of gastrodin. A significant increase in the expression of IGTs was observed at 0.5% Tween 80. In conclusion, Poloxamer 188 had minimal effect on the drug transport capacity of IGTs within the recommended limits of use. However, the expression of IGTs increased in response to 0.5% Tween 80, which significantly enhanced the drug transport capacity of IGTs. However, 0.1% and 2.0% Tween 80 had no significant effect.

Treatment of swine manure by hydrothermal carbonization (HTC) with the aid of different surfactants was first explored in this study. PEG 400 (polyethylene glycol 400) and Tween 80 facilitated the formation of bio-oil. SLS (sodium lignosulfonate) and SDS (sodium dodecyl sulfate) promoted the formation of water-soluble matters/gases. Span 80 enhanced the formation of hydrochar, which resulted in a 50.19 % mass yield, 92.39 % energy yield, and a caloric value of 28.68 MJ/kg. The hydrochar obtained with Span 80 presented a similar combustion performance to raw swine manure and the best pyrolysis performance. The use of Span 80 promoted the transfer of degradation products to hydrochar, especially hydrophobic ester and ketone compounds. Notedly, Span 80 suppressed the synthesis of PAHs during the HTC process, which was reduced to 0.92 mg/kg. Furthermore, the hydrochar produced with Span 80 contained lower contents of heavy metals. On the whole, Span 80 has shown great potential in enhancing the HTC of swine manure. The acting mechanisms of surfactants in the HTC of swine manure included adsorption, dispersion, and electrostatics repulsion.

Investigating surfactant effects on the floatability of Wiser bituminous coal holds significant importance in improving coal cleanliness and utilization value. Using density functional theory and molecular dynamics simulation methods, this study constructed models of Wiser bituminous coal and examined the impact of different surfactants, including the anionic surfactant sodium dodecyl benzene sulfonate, the cationic surfactant hexadecyl trimethyl ammonium bromide (CTAB), and the non-ionic surfactant fatty alcohol ethoxylated ether. The focus was on investigating the charge distribution characteristics of these molecules and the modifying effect of binary surfactants on the hydrophobicity of bituminous coal. Results revealed that the maximum electrostatic potential was concentrated near oxygen/nitrogen/sulfur-containing functional groups like sulfonic acid groups, quaternary ammonium cations, ethylene oxide, hydroxyl groups, carboxyl groups, and sulfur bonds. These functional groups exhibited a propensity for accepting/delivering electrons to form hydrogen bonds. Among the surfactants tested, CTAB revealed the slightest difference in frontier orbital energy, measuring 3.187 eV, thereby demonstrating a superior trapping ability compared with the other two surfactants. Adsorption reactions within the system were determined to be spontaneous, with over 60% of the interaction force attributed to electrostatic forces. Moreover, the repulsive force magnitude with water molecules followed the trend: sulfonate group (2.20 Å) < ethylene oxide (2.43 Å) < quaternary ammonium cation (2.57 Å), indicating more excellent water repellency of CTAB. Findings showed that CTAE binary surfactants proved most effective in modifying the hydrophobicity of bituminous coal. This study offers valuable insights into reducing waste, pollution, and resource wastage.

Surfactants as synergistic agents are necessary to improve the stability and utilization of pesticides, while their use is often accompanied by unexpected release into the environment. However, there are no efficient strategies available for screening low-toxicity surfactants, and traditional toxicity studies rely on extensive experimentation which are not predictive. Herein, a commonly used agricultural adjuvant Triton X (TX) series was selected to study the function of amphipathic structure to their toxicity in zebrafish. Molecular dynamics (MD) simulations, transcriptomics, metabolomics and machine learning (ML) were used to study the toxic effects and predict the toxicity of various TX. The results showed that TX with a relatively short hydrophilic chain was highly toxic to zebrafish with LC50 of 1.526 mg/L. However, TX with a longer hydrophilic chain was more likely to damage the heart, liver and gonads of zebrafish through the arachidonic acid metabolic network, suggesting that the effect of surfactants on membrane permeability is the key to determine toxic results. Moreover, biomarkers were screened through machine learning, and other hydrophilic chain lengths were predicted to affect zebrafish heart health potentially. Our study provides an advanced adjuvants screening method to improve the bioavailability of pesticides while reducing environmental impacts.

OA-AP, DTAB-AP, DDBAB-AP complexes were synthesized by introducing surfactants of OA, DTAB and DDBAB into attapulgite (AP). The complexes were systematically characterized. The appearance of new diffraction peaks at low angle indicated a new lamellar structure of OA (DTAB, DDBAB)-AP complexes. Then, the pesticide avermectin (AV) composites of AV/DTAB-OA-AP, AV/DDBAB-OA-AP, sodium alginate (SA) @AV/DTAB-OA-AP and SA@AV/DDBAB-OA-AP were prepared and investigated detailedly. The basal spacings of AV/DTAB-OA-AP and AV/DDBAB-OA-AP were bigger than those of OA-AP and DTAB(DDBAB)-AP. The existences of AV, surfactants and SA molecules of the composites were further confirmed. Furthermore the effect of SA on AV release behaviors of SA@AV/DTAB (DDBAB)-OA-AP microspheres was investigated and compared. Compared to AV/DTAB (DDBAB)-OA-AP, the released rate of the microspheres decreased remarkably. The AV release behaviors of AV/DTAB (DDBAB)-OA-AP could be fitted with pseudo second-order model, while the first-order model was better to describe those of the microspheres. Finally, the bioassay of the microspheres were studied and analyzed. The microspheres had a longer duration and control effect on Mythimna separata. This study could be helpful to provide a pesticide delivery system to improve the utilization efficiency of pesticides.

Poor solubility of drugs leads to poor bioavailability and therapeutic efficiency. A large proportion of drugs that are not developed and marketed for use by patients are due to their extremely low solubility. Therefore, improving the solubility of poorly water-soluble drugs is one of the most important aspects of the field of drug research. With the continuous development of more and more formulation techniques and excipient applications, the solubility of poorly water-soluble drugs can be improved to a certain extent to obtain better pharmacokinetics and pharmacodynamics, including pH microenvironment regulation technology, inclusion complex, solid dispersion, nanotechnology, and application of surfactants. However, the most widely used among them is the application of surfactants. This technique can reduce the surface tension, improve wettability, and have a remarkable solubilizing ability after forming micelles. However, surfactants have also been found to possess certain limitations in solubilization. In this review, the factors affecting the solubilization of surfactants and limiting their application have been summarized from several aspects. These factors include drugs, additives, and media. Some ideas to solve these application limitations have also been put forward, which can lay a foundation for the wider application of surfactants in the future.

There is little information on how widespread surfactants affect the adsorption of norfloxacin (NOR) onto iron oxide minerals. In order to elucidate the effects of various surfactants on the adsorption characteristics of NOR onto typical iron oxides, we have explored the different influences of sodium dodecylbenzene sulfonate (SDBS), an anionic surfactant, and didodecyldimethylammonium bromide (DDAB), a cationic surfactant, on the interactions between NOR and ferrihydrite under different solution chemistry conditions. Interestingly, SDBS facilitated NOR adsorption, whereas DDAB inhibited NOR adsorption. The adsorption-enhancement effect of SDBS was ascribed to the enhanced electrostatic attraction, the interactions between the adsorbed SDBS on ferrihydrite surfaces and NOR molecules, and the bridging effect of SDBS between NOR and iron oxide. In comparison, the adsorption-inhibition effect of DDAB owning to the adsorption site competitive adsorption between NOR and DDAB for the effective sites as well as the steric hindrance between NOR-DDAB complexes and the adsorbed DDAB on ferrihydrite surfaces. Additionally, the magnitude of the effects of surfactants on NOR adsorption declined with increasing pH values from 5.0 to 9.0, which was related to the amounts of surfactant binding to ferrihydrite surfaces. Moreover, when the background electrolyte was Ca2+, the enhanced effect of SDBS on NOR adsorption was caused by the formation of NOR-Ca2+-SDBS complexes. The inhibitory effect of DDAB was due to the DDAB coating on ferrihydrite, which undermined the cation-bridging effect. Together, the findings from this work emphasize the essential roles of widely existing surfactants in controlling the environmental fate of quinolone antibiotics.

Aflatoxin B1 (AFB1) is a common mycotoxin that is of significant global concern due to its impact on food safety. Herein, we innovatively develop a sensing platform to detect AFB1 based on evaporation of surfactant solutions on the hydrophobic surface, resulting in dried patterns with varied sizes. The surfactant CTAB solution produces a relatively large dried pattern due to the surface wetting. However, the reduction in the dried pattern size is found when the mixture of CTAB and AFB1 aptamer is tested, because the formation of CTAB/aptamer complex. Moreover, the dried pattern size of the mixture of CTAB, aptamer, and AFB1 increases due to the specific binding of AFB1 to its aptamer. Using this innovative strategy, the AFB1 detection can be fulfilled with a detection limit of 0.77 pg/mL. As a simple, convenient, inexpensive, and label-free method, the surfactant-mediated surface droplet evaporation-based biosensor is very promising for various potential applications.

In the practical application of hydraulic rotating machinery, it is essential to thoroughly explore drag reduction and rheological characteristics of drag-reducing additives to optimize machinery efficiency and reduce equipment consumption. This paper combines simulation and experimental approaches to investigate the drag-reduction performance and rheological properties of drag-reducing additives. Numerical simulations are initially conducted to investigate the shear-thinning properties of drag-reducing fluid and explore variations in drag-reduction rate. Turbulent phenomena characteristics are described by analyzing turbulent statistical quantities. Subsequently, the rheological behaviors of polyethylene oxide (PEO), cetyltrimethyl ammonium chloride (CTAC), and their mixed solutions under different conditions are scrutinized using a rotational rheometer. The findings indicate that the drag reduction effect amplifies as the rheological index n and characteristic time λ decrease. The numerical simulations show a maximum drag reduction rate of 20.18%. In rheological experiments, a three-stage viscosity variation is observed in single drag-reducing additives: shear thickening, shear thinning, and eventual stabilization. Composite drag-reducing additives significantly reduce the apparent viscosity at low shear rates, thereby strengthening the shear resistance of the system.