Paper-based cultural relics often undergo acidification and deterioration during long-term preservation. Accurate detection of paper acidity is of great significance to assess aging status and extend the preservation lifetime of paper-based cultural relics. Rapid identification of the acidification degree and acid distribution across multiple regions of paper is essential. Inspired by fluorescent sensing technology, pH-sensitive cadmium telluride (CdTe) quantum dots (QDs) and rhodamine B (RB) fluorescent probes are synthesized and incorporated onto the nanofibers of a bacterial cellulose (BC) membrane to enable visual acidity detection of paper. Due to the complementary pH detection range of CdTe QDs and RB probes, the composite BC membrane exhibits a clear pH response across an acidic to neutral range (pH 3.0-7.5). Notably, the contrasting fluorescent colors of the two probes within the BC membrane allow for easy visualization of paper pH and acidity distribution with the naked eyes. A distinct color transition from red to green was observed on the fluorescent BC membrane when it is applied to a model paper with a gradient pH distribution. The feasibility of this method was verified by using the flat-headed pH electrode method. Additionally, common metal ions in most paper fillers, inks, pigments, as well as some sugars and amino acids showed minimal interference with the pH response of the composite BC membrane, highlighting its potential and broad applicability for visual acidity detection in paper-based cultural relics.

A highly water-soluble and fluorescent N,S-doped carbon dots/europium (N,S-CDs/Eu) was successfully synthesized via a secondary hydrothermal method. This involved surface modification of N,S-CDs derived from sunflower stem pith (SSP) with europium ions (Eu3+) doping. When excited within the range of 400-470 nm, N,S-CDs/Eu exhibited a stable and broad optimal emission wavelength ranging from 505 to 540 nm. Notably, the photoluminescence quantum yield (PLQY) of N,S-CDs/Eu is 31.4%, significantly higher than the 19.5% observed for N,S-CDs. Additionally, by dissolving N,S-CDs/Eu into polyvinyl alcohol (PVA), a uniform fluorescent anti-counterfeiting ink can be prepared. The N,S-CDs/Eu/TiO2 composite demonstrates excellent photocatalytic degradation ability towards the organic dye methylene blue (MB). N,S-CDs/Eu has potential in the field of fluorescent inks and photocatalysis due to its simple and efficient preparation and excellent properties.

The microenvironment of wound healing is susceptible to bacterial infection, chronic inflammation, oxidative stress, and inadequate angiogenesis, requiring the development of innovative wound dressings with antibacterial, anti-inflammatory, antioxidant, and angiogenic capabilities. This research crafted a new multifunctional bacterial cellulose composite membrane infused with copper-doped carbon dots (BC/Cu(II)-RCDs). Findings validated the successful loading of copper-doped carbon dots onto the BC membrane via hydrogen bonding interactions. Compared to the pure BC membrane, the BC/Cu(II)-RCDs composite membrane exhibited significantly enhanced hydrophilicity, tensile properties, and thermal stability. Diverse in vitro assays demonstrated excellent biocompatibility and antibacterial activity of BC/Cu(II)-RCDs composite membranes, alongside their ability to expedite the inflammatory phase and stimulate angiogenesis. In vivo trials corroborated the membrane\'s ability to foster epithelial regeneration, collagen deposition, and tissue regrowth in full-thickness skin wounds in rats while also curbing inflammation in infected full-thickness skin wounds. More importantly, the treatment of the BC/Cu(II)-RCDs composite membrane may result in the activation of VEGF and MAPK signaling proteins, which are key players in cell migration, angiogenesis, and skin tissue development. In essence, the developed BC/Cu(II)-RCDs composite membrane shows promise for treating infected wounds and serves as a viable alternative material for medicinal bandages.

BACKGROUND: Curcumin has been used in traditional medicine because of its pharmacological activity, including antioxidant, antibacterial, anticancer, and anticarcinogenic properties. Therefore, sensitive and selective monitoring of curcumin is highly demand for practical application.
RESULTS: In this study, we describe the construction of a fluorescence method for curcumin assay based on nitrogen-doped MoS2 quantum dots (N-MoS2 QDs). The N-MoS2 QDs are constructed by a solvothermal method using sodium molybdate and Cys as precursors. With the addition of curcumin, the bright blue fluorescence of N-MoS2 QDs is quenched by the inner filter effect (IFE). The QDs emitted bright blue fluorescence and could be quenched by the addition of curcumin via IFE. The dynamic range is the range of 0.1-10 μM for curcumin detection, with a detection limit of 59 nM. N-MoS2 QDs were applied for curcumin assay in real samples with good recovery. In addition, the N-MoS2 QDs exhibited relative low cytotoxicity and could be applied for fluorescence-based imaging in biological samples.
CONCLUSIONS: Our study indicates that the sensor possesses good selectivity to monitor curcumin in water samples, human urine samples, ginger powder samples, mustard samples, and curry samples with satisfactory recoveries. The N-MoS2 QDs possess less cytotoxicity with excellent biocompatibility and were applied for in vitro cell imaging.

Okadaic acid (OA), a predominant toxic entity in Diarrhetic Shellfish Poisoning (DSP), carries substantial significance for both marine ecosystems and human well-being. The nascent organic photoelectrochemical transistor (OPECT) biosensor has emerged as a promising biometric methodology, poised to offer a fresh realm for the detection of marine biotoxins. In this work, a biosensor utilizing signal amplification based on Cd0.5Zn0.5S/ZnIn2S4 quantum dots (CZS/ZIS QDs) in OPECT was proposed for OA detection, where ZIS QDs were labeled on aptamer and a substantial quantity of QDs were generated via cyclic shearing facilitated through target-induced Exo I enzyme. Owing to the sensitizing influence of ZIS QDs on CZS, the photoelectric conversion efficiency was augmented, culminating in a notable anodic photocurrent upon exposure to light, thereby inducing a transformation in the channel state of the polymer poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) and consequently producing a remarkable modification in the channel current. The detection limit of the biosensor as low as 12.5 pM and a superior stability and specificity was confirmed, which also showed commendable outcomes in actual samples testing. Consequently, this study not only introduces a novel pathway for swift OA detection, but unveils a novel perspective for future expedited and convenient on-site detection of marine biotoxins.

The perovskite materials are broadly incorporated into optoelectronic devices due to a number of advantages. Their rapid technological progress is related to the relatively simple fabrication process, low production cost and high efficiency. Significant improvement is made in the light emitting, detection performance and device design especially operating in the visible and near-infrared regions. This review presents the status and possible future development of the perovskite devices such as solar cells, photodetectors, and light-emitting diodes. The fundamental properties of perovskite materials related to their effective device applications are summarized. Since the development of the perovskite technology is mainly driven by the revolutionary evolution of the semiconductor perovskite solar cell as a robust candidate for next-generation solar energy harvesting, this topic is considered first. The device engineering of various perovskite photodetector structures, including perovskite quantum dot photodetectors, is then discussed in detail. Their performance is compared with the current commercial photodetectors available on the global market together with their challenges. Finally, the considerable progress in the fabrication of the perovskite light-emitting diodes with external quantum efficiency exceeding 20% is presented. The paper is completed in an attempt to determine the development of perovskite optoelectronic devices in the future.

Materials with circularly polarized luminescence (CPL) exhibit great application potential in biological scenes such as cell imaging, optical probes, etc. However, most developed materials are non-aqueous and toxic, which seriously restricts their compatibility with the life systems. Thus, it is necessary to explore a water-based CPL system with high biocompatibility so that to promote the biologic application process. Herein, a facile and efficient route to achieve the CPL properties of a functional aqueous solution is demonstrated by the combination of 0D quantum dots (QDs) and 2D chiral nanosheets. Benefited by the specific absorption ability of nanosheets for left/right-handed CPL, the QDs adsorbed onto the surface of nanosheets through hydrogen bond interactions showed apparent CPL features. In addition, this system has a good extensibility as the CPL property can be effectively regulated by changing the kind of emissive QDs. More importantly, this water-based nano-composite with facile fabrication process (one-step mixing) is suitable for the real applications, which is undoubtedly beneficial for the further progress of functional CPL materials.

Effective electron supply to produce ammonia in photoelectrochemical nitrogen reduction reaction (PEC NRR) remains challenging due to the sluggish multiple proton-coupled electron transfer and unfavorable carrier recombination. Herein, InP quantum dots decorated with sulfur ligands (InP QDs-S2-) bound to MIL-100(Fe) as a benchmark catalyst for PEC NRR is reported. It is found that MIL-100(Fe) can combined with InP QDs-S2- via Fe─S bonds as bridge to facilitate the electron transfer by experimental results. The formation of Fe─S bonds can facilitate electron transfer from inorganic S2- ligands of InP QDs to the Fe metal sites of MIL-100(Fe) within 52 ps, ensuring a more efficient electron transfer and electron-hole separation confirmed by the time-resolved spectroscopy. More importantly, the process of photo-induced carrier transfer can be traced by in situ attenuated total reflection surface-enhanced infrared tests, certifying that the effective electron transfer can promote N≡N dissociation and N2 hydrogenation. As a result, InP QDs-S2-/MIL-100(Fe) exhibits prominent performance with an outstanding NH3 yield of 0.58 µmol cm-2 h-1 (3.09 times higher than that of MIL-100(Fe)). This work reveals an important ultrafast dynamic mechanism for PEC NRR in QDs modified metal-organic frameworks, providing a new guideline for the rational design of efficient MOFs photocathodes.

Tannic acid (TA)-derived carbon dots (TACDs) were synthesized for the first time via a solvothermal method using TA as one of the raw materials, which may effectively inhibit amyloid fibril aggregation and disaggregate mature fibril. The fluorescent property of TACDs were modulated by adjusting the ratio of TA to o-phenylenediamine (oPD), and TACDs fabricated with the precursor ratio as 1:1 showed the best fluorescent property. Circular dichroism spectra (CD) showed that the structure of β-sheet decreased as the concentration of TACDs increased. The inhibition efficiency, as confirmed by thioflavin T (ThT) and transmission electron microscopy (TEM), is extraordinary at 98.16%, whereas disaggregation efficiency is noteworthy at 97.97%, and the disaggregated lysozyme fibrils did not reaggregate after 7 days. More critically, TACDs can also alleviate the cellular toxicity caused by Aβ fibrils and improve cell viability. This work offers a new perspective on the design of scavengers for amyloid plaques.

UNASSIGNED: The formation of adhesion after tendon injury represents a major obstacle to tendon repair, and currently there is no effective anti-adhesion method in clinical practice. Oxidative stress, inflammation, and fibrosis can occur in tendon injury and these factors can lead to tendon adhesion. Antioxidant carbon dots and ursolic acid (UA) both possess antioxidant and anti-inflammatory properties. In this experiment, we have for the first time created RCDs/UA@Lipo-HAMA using red fluorescent carbon dots and UA co-encapsulated liposomes composite hyaluronic acid methacryloyl hydrogel. We found that RCDs/UA@Lipo-HAMA could better attenuate adhesion formation and enhance tendon healing in tendon injury.
UNASSIGNED: RCDs/UA@Lipo-HAMA were prepared and characterized. In vitro experiments on cellular oxidative stress and fibrosis were performed. Reactive oxygen species (ROS), and immunofluorescent staining of collagens type I (COL I), collagens type III (COL III), and α-smooth muscle actin (α-SMA) were used to evaluate anti-oxidative and anti-fibrotic abilities. In vivo models of Achilles tendon injury repair (ATI) and flexor digitorum profundus tendon injury repair (FDPI) were established. The major organs and blood biochemical indicators of rats were tested to determine the toxicity of RCDs/UA@Lipo-HAMA. Biomechanical testing, motor function analysis, immunofluorescence, and immunohistochemical staining were performed to assess the tendon adhesion and repair after tendon injury.
UNASSIGNED: In vitro, the RCDs/UA@Lipo group scavenged excessive ROS, stabilized the mitochondrial membrane potential (ΔΨm), and reduced the expression of COL I, COL III, and α-SMA. In vivo, assessment results showed that the RCDs/UA@Lipo-HAMA group improved collagen arrangement and biomechanical properties, reduced tendon adhesion, and promoted motor function after tendon injury. Additionally, the expression of nuclear factor erythroid 2-related factor 2 (Nrf2) and heme oxygenase 1 (HO-1) in the RCDs/UA@Lipo-HAMA group increased; the levels of cluster of differentiation 68 (CD68), inducible Nitric Oxide Synthase (iNOS), COL III, α-SMA, Vimentin, and matrix metallopeptidase 2 (MMP2) decreased.
UNASSIGNED: In this study, the RCDs/UA@Lipo-HAMA alleviated tendon adhesion formation and enhanced tendon healing by attenuating oxidative stress, inflammation, and fibrosis. This study provided a novel therapeutic approach for the clinical treatment of tendon injury.