UNASSIGNED: To explore the feasibility and effectiveness of mixed reality technology for localizing perforator vessels in the repair of mandibular defects using free fibular flap.
UNASSIGNED: Between June 2020 and June 2023, 12 patients with mandibular defects were repaired with free fibular flap. There were 8 males and 4 females, with an average age of 61 years (range, 35-78 years). There were 9 cases of ameloblastomas and 3 cases of squamous cell carcinomas involving the mandible. The disease duration ranged from 15 days to 2 years (median, 14.2 months). The length of mandibular defects ranged from 5 to 14 cm (mean, 8.5 cm). The area of soft tissue defects ranged from 5 cm×4 cm to 8 cm×6 cm. Preoperative enhanced CT scans of the maxillofacial region and CT angiography of the lower limbs were performed, and the data was used to create three-dimensional models of the mandible and lower limb perforator vessels. During operation, the mixed reality technology was used to overlay the three-dimensional model of perforator vessels onto the body surface for harvesting the free fibular flap. The length of the fibula harvested ranged from 6 to 15 cm, with a mean of 9.5 cm; the size of the flap ranged from 6 cm×5 cm to 10 cm×8 cm. The donor sites were sutured directly in 7 cases and repaired with free skin grafting in 5 cases.
UNASSIGNED: Thirty perforator vessels were located by mixed reality technology before operation, with an average of 2.5 vessels per case; the distance between the exit point of the perforator vessels located before operation and the actual exit point ranged from 1 to 4 mm, with a mean of 2.8 mm. All fibular flaps survived; 1 case had necrosis at the distal end of flap, which healed after dressing changes. One donor site had infection, which healed after anti-inflammatory dressing changes; the remaining incisions healed by first intention, and the grafts survived smoothly. All patients were followed up 8-36 months (median, 21 months). The repaired facial appearance was satisfactory, with no flap swelling. Among the patients underwent postoperative radiotherapy, 2 patients had normal bone healing and 1 had delayed healing at 6 months.
UNASSIGNED: In free fibular flap reconstruction of mandibular defects, the use of mixed reality technology for perforator vessel localization can achieve three-dimensional visualization, simplify surgical procedures, and reduce errors.
UNASSIGNED: 探讨在游离腓骨皮瓣修复下颌骨缺损中，使用混合现实技术定位穿支血管的可行性和效果。.
UNASSIGNED: 2020年6月—2023年6月，采用游离腓骨皮瓣修复12例下颌骨缺损患者。男8例，女4例；年龄35～78岁，平均61岁。下颌骨成釉细胞瘤9例，侵犯下颌骨口腔鳞癌3例。病程15 d～2年，中位病程14.2个月。下颌骨缺损长度5～14 cm，平均8.5 cm；软组织缺损范围为5 cm×4 cm～8 cm×6 cm。术前均行颌面部增强CT和下肢CT血管造影检查，将所得数据制成下颌骨、下肢穿支血管三维模型。术中使用混合现实技术将穿支血管三维模型重叠于患者体表，制取游离腓骨皮瓣修复缺损。腓骨切取长度为6～15 cm，平均9.5 cm；皮瓣切取范围6 cm×5 cm～10 cm×8 cm，供区拉拢缝合（7例）或游离植皮修复（5例）。.
UNASSIGNED: 12例患者术前使用混合现实技术定位穿支血管30支，每例平均2.5支；术中测量术前定位穿支血管穿出点与实际穿出点距离为1～4 mm，平均2.8 mm。术后12例腓骨瓣顺利成活；1例皮瓣远端边缘坏死，换药后延期愈合。供区发生感染1例，经抗炎换药治疗后愈合；其余患者切口Ⅰ期愈合，植皮顺利成活。患者均获随访，随访时间8～36个月，中位时间21个月。修复面部外形好，皮瓣无臃肿。3例术后接受放化疗患者中，随访6个月时2例正常骨愈合、1例延迟愈合。.
UNASSIGNED: 在游离腓骨皮瓣修复下颌骨缺损手术中使用混合现实技术，可以实现穿支血管三维可视化，手术操作简便，误差较小。.

Fibula transplantation plays an irreplaceable role in restoring the function and morphology of the defected mandible. However, the complex load-bearing environment of the mandible makes it urgent to accurately reconstruct the mandible, ensure the position of the condyle after surgery, and restore the patient\'s occlusal function and contour. The intervention of digital design and three-dimensional (3D) printed titanium mesh provides a more efficient method and idea to solve this problem. Digital design guides the accurate positioning, osteotomy, and simultaneous implant placement during surgery, and 3D printed titanium mesh ensures stable condyle position after surgery, restoring good mandibular function. The double-layer folded fibula maintains the vertical height of the mandible and a good facial contour, and simultaneous implant placement can establish a good occlusal relationship. This study conducted a retrospective analysis of five patients with jaw defects who underwent digital fibula reconstruction over the past 3 years. It was found that the surgical protocol combining digital design, 3D printed intraoperative guides, 3D printed titanium mesh, free fibula flap, immediate implant, and occlusal reconstruction to repair jaw defects had more ideal facial appearance and biological function. It will provide a more reliable surgical protocol for clinical management of large mandibular defects.

Calcifying Epithelial Odontogenic Tumor (CEOT), also known as Pindborg tumor, is a rare odontogenic benign tumor. It was first reported by Thoma and Goldman in 1946 and defined as an independent tumor by Pindborg in 1957. Herein, we reported a CEOT case involving most of the mandible after I-125 implantation in a 53-year-old man. We cooperated with governmental and hospital departments to resect the tumors, reconstruct the mandible with a fibular flap graft, and properly dispose of the radioactive particles.

As maxillofacial surgical techniques have advanced, vascularized bone free flap transplantation has become the standard treatment for repairing maxillofacial defects. In this meta-analysis, we summarize the survival rates of implants after VBFF surgery for maxillary and mandibular reconstructions and investigate the factors affecting patient outcomes.
The PubMed, Embase, and Wanfang databases were searched up to May 31, 2022. The results of the treatment effect are presented as the risk ratio or odds ratio, using 95% confidence intervals. Statistical significance was calculated at α = 0.05 (two-tailed z tests).
35 studies were included in our analysis. The results revealed a 3-year and 5-year implant survival rate of 95.2% and 85.4% in VBFFs, respectively. The location of jaw defects (maxilla or mandible) or timing of implantation was not found to have a statistically significant influence on the survival rate. However, statistically significant differences were observed in the failure of implants placed in irradiated bone tissue.
Statistically significant differences were not found in the implant survival rate between simultaneous and delayed implantation, or between maxillary and mandibular defects. However, dental implants placed in irradiated flaps tended to have a lower survival rate than those surgically placed in non-irradiated flaps.

A new individualized, cost-effective, modified semi-computer-assisted surgery (MSCAS) concept for free fibular flap mandibular reconstruction is reported and compared with the computer-assisted surgery (CAS) concept. Patients were divided into two groups and retrospectively reviewed. In the MSCAS and CAS groups, intraoperative guides were created using computer-aided design with manual fabrication and computer-aided design and manufacturing, respectively. Differences in specific linear and angular parameters on pre- and postoperative computed tomography scans were calculated for morphometric comparison, and clinical parameters and efficiency were analysed. RESULTS: Eighteen patients (CAS, 7; MSCAS, 11), were included. The morphometric comparison showed no significant differences between the groups. The mean deviation of the mandibular ramus length, body length, width 1 and width 2 was 0.82 ± 0.29 mm, 1.84 ± 0.43 mm, 1.89 ± 0.61 mm and 1.45 ± 0.61 mm in the CAS group versus 1.56 ± 0.54 mm, 1.72 ± 0.33 mm, 2.24 ± 0.55 mm and 2.36 ± 0.50 mm in the MSCAS group (p = 0.7804, p = 0.9997, p = 0.9814 and p = 0.6334). The mean deviation of the sagittal, axial and coronal mandibular angles was 1.56 ± 0.48°, 1.93 ± 0.50° and 2.15 ± 0.72° in the CAS group versus 2.19 ± 0.35°, 1.86 ± 0.35° and 1.94 ± 0.55° in the MSCAS group (p = 0.7594, p = 0.9996 and p = 0.9871). There were no significant differences in clinical parameters, efficiency or postoperative complications between the groups. CONCLUSION: The accuracy and operative efficiency of the MSCAS concept are comparable to those of the more expensive CAS concept. Therefore, in times of increasing clinical costs, this concept might be an adequate and inexpensive alternative to preoperative CAS.

This retrospective case-series study aimed to elucidate the three-dimensional attachment morphometric features and to quantify the volumetric changes of the masticatory muscles following free fibular flap reconstruction of the mandibular condyle. Navigation software (iPlan, version 3.0; Brainlab) was used to perform delineation and volumetric measurement of the masticatory muscles using DICOM data. In total, 30 patients were included in this retrospective case series. In 25 cases (83.33%), the lateral pterygoid muscle achieved reattachment within 6 months postoperatively. The medial pterygoid muscles on the affected side achieved ectopic attachment in all cases. However, masseter reattachment on the affected side was achieved in only three cases. On the normal side, the volumes of lateral pterygoid muscle, medial pterygoid muscle, and masseter had recovered to almost preoperative levels at 1 year postoperatively. On the affected side, the volume of medial pterygoid muscle had decreased significantly (p = 2.4e-04) at 3 months postoperatively. The volumes of lateral pterygoid muscle and masseter showed mild decreases at 3 months postoperatively, but these were not significant (p = 0.52 and p = 0.05 for the pterygoid muscle and masseter, respectively). At 6 months after surgery, with the exception of the volume of the lateral pterygoid muscle (p = 0.06), the total volume of the masticatory muscles decreased significantly on the affected side. The volumes of lateral pterygoid muscle, medial pterygoid muscle, and masseter showed significant decreases at 1 year postoperatively (p = 0.03, p = 4.7e-08, and p = 1.1e-05, respectively) on the affected side. The postoperative volumes of the masseter, medial pterygoid, and lateral pterygoid muscles showed significant decreases due to the loss of reattachment. The results of this study may not help to ascertain whether reattachment of masticatory muscles will lead to better function. As a consequence, clinical trials of higher quality are needed.

Objective:To investigate the application of free fibular flap based on digital technology in mandibular defects. Method:Eight cases of mandibular defects underwent virtual surgery and guide plate design before operation. The mandibular osteotomy guide plate, fibula plastic guide plate and mandibular reconstruction model were prepared by rapid prototyping technology. The individualized reconstruction titanium plates were prefabricated on the mandibular reconstruction model. Based on the guide plates and the individualized reconstruction titanium plates, the mandibular defects were repaired accurately. At the same time, CT angiography was used to observe the variation of peroneal artery. For patients with soft tissue defects, the superficial position of the point going out muscle of perforator vessels was located, and the skin flaps were designed to repair the soft tissue defect. Result:The free fibular flaps survived in all patients. The guide plates were successfully implanted, the position of the individualized reconstruction titanium plates were accurate, and the occlussions were well recovered. Preoperative CT angiography was carried out without complication in all patients, the desired anatomy was adequately demonstrated in all patients. The superficial position of the point going out muscle of perforator vessels during operation were basically in accordance with those detected by CT angiography. Conclusion:The free fibular flaps based on digital technology can successfully repair mandibular defects with good aesthetic and functional results.
目的：探讨基于数字化技术的游离腓骨肌皮瓣在下颌骨缺损中的应用价值。 方法：8例拟行游离腓骨肌皮瓣修复手术的患者，术前行虚拟手术及导板设计，利用快速成型技术制备下颌骨截骨导板、腓骨塑形导板以及下颌骨修复后模型，在下颌骨修复后模型上预制个体化重建钛板，术中根据导板和个体化重建钛板，完成对下颌骨缺损的精确修复。同时通过术前下肢CT血管造影观察腓动脉有无变异，对合并软组织缺损的患者，定位穿支血管出肌点的体表位置，以其为中心设计皮瓣，完成软组织缺损的修复。 结果：8例患者术后移植游离腓骨肌皮瓣均成活，导板术中就位顺利，个体化重建钛板位置准确，患者咬合关系恢复良好。术前CT血管造影检查顺利，CT血管造影可以准确显示腓动脉的解剖位置，定位穿支血管出肌点的体表位置与术中所见完全吻合。 结论：基于数字化技术的游离腓骨肌皮瓣能够成功修复下颌骨缺损，获得良好的美观和功能效果。.

BACKGROUND: Vascularized free fibular flaps have been the \"workhorses\" for reconstruction of many kinds of bone defects. Nevertheless, there is no consensus regarding the optimal wound closure method for fibular donor sites. This study aimed to compare prognostic outcomes of primarily closures (PC) and skin grafts (SG) for fibular donor sites.
METHODS: Studies regarding donor-site outcomes of PC versus SG in patients undergoing free fibular flap procedures were included. Two authors individually searched PubMed, Web of Science, EMBASE, Cochrane Library and clinicaltrials.gov up to February 2019, extracted the data and assessed quality of each selected article. Ultimately, The incidences of donor-site morbidities were evaluated.
RESULTS: Five studies with a total of 119 patients were included in our analysis. No significant differences were found with respect to the rates of donor-site problems between the PC and SG groups.
CONCLUSIONS: Fibular flap patients undergoing PC and SG wound closures may have similar donor-site outcomes. Additional large-scale studies are necessary to draw a solid conclusion.