Carbon quantum dots (CQDs) are ideal fluorescent probes for rapid detection. This paper reviews the synthesis methods of CQDs, their application in the rapid detection of antibiotics and heavy metals in the environment and food, and the underlying detection mechanisms. The hydrothermal method is the most commonly used for synthesis, and CQDs doped with heteroatoms (such as N, P and S) exhibit superior fluorescence performance. In the presence of antibiotics and heavy metals, the fluorescence of CQDs can be quenched or enhanced. Single-signal and dual-signal probes can be developed using the fluorescence, phosphorescence and absorbance of CQDs, enabling rapid detection of various antibiotics (e.g., tetracycline, quinolone and beta-lactam antibiotics) and heavy metals (e.g., Cd2+, Cr6+, Fe3+, Hg2+, and Pb2+). With the combination of smartphones and fluorescent probe test strips developed based on CQDs, on-the-spot rapid detection can be realized. This review offers new insights into the rapid detection of CQDs.

The selective binding of ligand molecules towards the 5\' and 3\' ends of G-quadruplex (G4) may differentially affect the physiological function of G4s. However, there is still a lack of sensitive and low-cost approaches to accurately measure the binding preference of ligands on G4s, although multiple ways have been developed to evaluate the interaction between ligands and G4s. Here, we propose a new protocol named G4-AFQ to test the selectivity of ligands towards the two terminal G-tetrads of G4s. In this protocol, the fluorophore AMCA is respectively modified at the 5\' or 3\' end of G4, and which end of AMCA fluorescence is quenched means that the ligand binds to the G-tetrad at that end. Through G4-AFQ, the affinity constant of ligands towards the binding site can also be obtained. Compared with the commonly used nuclear magnetic resonance (NMR) method, G4-AFQ is more convenient, sensitive, cost-effective, and suitable for the measurement of the vast majority of G4 ligands, with a great potential for widespread application.

Two coordination polymers (CPs), [Zn5(L)2(phen)5](1) and [Cd2(HL)(2,2-bpy)(H2O)3](2), were synthesized by using 2\',3,3\',5,5\'-Diphenyl ether pentacarboxylic acid (H5L), phenanthroline (phen), and 2,2\'-bipyridine (2,2\'-bpy) under hydrothermal conditions. The L5- ligand adopts the μ6-к2: к2: к1: к1: к1: к1 mode in 1 and the μ5-к2: к2: к2: к2: к1 mode in 2. Sensing experiments show that 1 and 2 are fluorescence probes with high sensitivity and rapid detection of nitro explosives, antibiotics, and pesticides. In order to verify the ability of 2 to detect FLU in actual samples, we performed a spiked recovery experiment in green pepper water. The spiked recoveries were 97.77-101.18 %. Interestingly, because H5L is not completely deprotonated in 2, there is abundant hydrogen bonding, which makes the fluorescence quenching rate higher and the detection limit lower. The possible fluorescence quenching mechanism of 1 and 2 can be explained by their UV-VIS absorption spectra and orbital energy levels.

In this study, an NH2-Cu-MOF was synthesized using the one-pot method and employed as a fluorescence probe for doxorubicin (DOX) detection. The synthesized NH2-Cu-MOF exhibited remarkable fluorescence recognition capabilities for detecting DOX. Within the concentration range of 1-100 µmol/L, a linear relationship was observed between the fluorescence intensity of the NH2-Cu-MOF and the DOX concentration. Furthermore, the synthesized NH2-Cu-MOF was effectively utilized for highly selective fluorescence quenching recognition and quantitative detection of DOX in the presence of multiple metal ions and other antibiotics. Despite interference from multiple metal ions and antibiotics, DOX was identified and quantified by highly selective fluorescence quenching with a detection limit of 2.1654 µmol/L. These findings underscore the potential of NH2-Cu-MOF as a class of \"on-off\" fluorescent probes for the rapid detection of DOX.

This study employs an optimized and environmentally friendly method to extract and purify chondroitin sulfate (CS) from bovine nasal cartilage using enzymatic hydrolysis, ethanol precipitation, and DEAE Sepharose Fast Flow column chromatography. The extracted CS, representing 44.67 % ± 0.0016 of the cartilage, has a molecular weight of 7.62 kDa. Characterization through UV, FT-IR, NMR spectroscopy, and 2-aminoacridone derivatization HPLC revealed a high content of sulfated disaccharides, particularly ΔDi4S (73.59 %) and ΔDi6S (20.61 %). Interaction studies with bovine serum albumin (BSA) using fluorescence spectroscopy and molecular docking confirmed a high-affinity, static quenching interaction with a single binding site, primarily mediated by van der Waals forces and hydrogen bonding. The interaction did not significantly alter the polarity or hydrophobicity of BSA aromatic amino acids. These findings provide a strong foundation for exploring the application of CS in tissue engineering and drug delivery systems, leveraging its unique interaction with BSA for targeted delivery and enhanced efficacy.

Vitamin B is easily degraded by light and heat during storage, which results in nutritional loss of food. Whey protein is expected to protect vitamin B by forming complexes through secondary bonds. The properties of the complexes and protective effects of whey protein on vitamins B1, B2, B3 and B6 were characterized. The percentage losses of vitamin B were decreased by more than 60% with the protection of whey protein. FTIR, fluorescence spectroscopy, thermodynamic analysis and molecular docking were used to investigate the binding interaction between vitamin B and whey protein. Vitamin B quenched the intrinsic fluorescence of whey protein, mainly with a static nature (Kq > 2.0 × 1010 L/(mol·s)). The interactions between whey protein and vitamin B were mostly mediated by hydrogen bonds and van der Waals forces, as demonstrated by the thermodynamic parameters and molecular docking.

Detection of florfenicol (FF) residues in animal-derived foods, as one of the most widely used antibiotics, is critically important to food safety. The fluorescent molecularly imprinted polymer (MIP) was synthesized by surface-initiated atom transfer radical polymerization technique with poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) microspheres, 4-vinylpyridine, ethylene glycol dimethacrylate, and FF as the matrix, functional monomer, crosslinker, and template molecule, respectively. Meanwhile, N-S co-doped carbon dot (CD) was synthesized with triammonium citrate and thiourea as precursors under microwave irradiation at 400 W for 2.5 min and then integrated into FF-MIP to obtain CD@FF-MIP. For comparison, non-imprinted polymer (NIP) without FF was also prepared. The adsorption capacity of CD@FF-MIP to FF reached 53.1 mg g-1, which was higher than that of FF-MIP (34.7 mg g-1), whereas the adsorption capacity of NIP was only 17.3 mg g-1. The adsorption equilibrium of three materials was reached within 50 min. Particularly, CD@FF-MIP exhibited an excellent fluorescence quenching response to FF in the concentration range of 3-50 µmol L-1. As a result, CD@FF-MIP was successfully utilized to extract FF in milk samples, which were analyzed by high-performance liquid chromatography. The standard recoveries were 95.8%-98.2%, and the relative standard deviation was 1.6%-4.2%. The method showed the advantages of simple operation, high sensitivity, excellent selectivity, and low cost, and also demonstrated a great application prospect in food detection.

To investigate the structural characteristics of cell wall pectic polysaccharides from wampee, water soluble pectin (WSP), chelator-soluble pectin (CSP) and sodium carbonate-soluble pectin (SSP) were purified. And the inhibitory effects of wampee polyphenol (WPP) on pectinase when these cell wall pectic polysaccharides were used as substrates were also explored. Purified WSP (namely PWSP) had the lowest molecular weight (8.47 × 105 Da) and the highest GalA content (33.43%). While purified CSP (called PCSP) and SSP contained more abundant rhamnogalacturonan I side chains. All of them were low-methoxy pectin (DE < 50%). Enzyme activity and kinetics analysis showed that the inhibition of pectinase by wampee polyphenol was reversible and mixed type. When SSP was used as the substrate, WPP had the strongest inhibition (IC50 = 1.96 ± 0.06 mg/mL) on pectinase. Fluorescence quenching results indicated that WPP inhibited enzyme activity by interacting with substrates and enzymes. Therefore, WPP has the application potential in controlling softening of fruits and vegetables.

BACKGROUND: Nitroaromatic compounds are inherently hazardous and explosive, so convenient and rapid detection strategies are needed for the sake of human health and the environment. There is an urgent demand for chemical sensing materials that offer high sensitivity, operational simplicity, and recognizability to effectively monitor nitroaromatic residues in industrial wastewater. Despite its importance, the mechanisms underlying fluorescence quenching or enhancement in fluorescent sensing materials have not been extensively researched. The design and synthesis of multiresponsive fluorescent sensing materials have been a great challenge until now.
RESULTS: In this study, a one-dimensional Cd-based fluorescent porous coordination polymer (Cd-CIP-1) was synthesized using 5-(4-cyanobenzyl)isophthalic acid (5-H2CIP) and 4,4\'-bis(1-imidazolyl)biphenyl (4,4\'-bimp) and used for the selective detection of nitrobenzene in aqueous solution by fluorescence quenching, with a limit of detection of 1.38 × 10-8 mol L-1. The presence of aniline in the Cd-CIP-1 solution leads to the enhancement of fluorescence property. Density functional theory and time-dependent density functional theory calculations were carried out to elucidate the mechanisms of the fluorescence changes. This study revealed that the specific pore size of Cd-CIP-1 facilitates analyte screening and enhances host-guest electron coupling. Furthermore, π-π interactions and hydrogen bond between Cd-CIP-1 and the analytes result in intermolecular orbital overlap and thereby boosting electron transfer efficiency. The different electron flow directions in NB@Cd-CIP-1 and ANI@Cd-CIP-1 lead to fluorescence quenching and enhancement.
UNASSIGNED: The multiresponsive coordination polymer (Cd-CIP-1) can selectively detect nitrobenzene and recognize aniline in aqueous solutions. The mechanism of fluorescence quenching and enhancement has been thoroughly elucidated through a combination of density functional theory and experimental approaches. This study presents a promising strategy for the practical implementation of a multiresponsive fluorescent chemical sensor.

Dissolved organic matter (DOM) plays an important role in metal migration and transformation within inland surface waters. In our study, spectroscopic and dialysis equilibrium analysis were combined to characterize the binding properties between DOM and Fe(II)/Mn(II). Four different type of DOM including two commercial DOM: humic acid、fulvic acid, and two natural dissolved organic matter collected from macrophyte-dominant region (MDR) and algae-dominated region (ADR) of Taihu Lake. Steady state/time resolved fluorescence spectroscopy indicated that the fluorescence intensity of DOM was quenched by Fe(II)/Mn(II) through a static quenching process. The adsorption isotherm shows that the adsorption capacity of DOM from Taihu Lake for metal ions is significantly higher than that of commercial humic acid. Simultaneously, the combination of MDR and Fe(II) has the highest adsorption capacity at 110.950 mg/g among all combinations. Furthermore, the Pseudo-second-order kinetic model and Elovich model were found to be superior in describing the adsorption process, with chemical adsorption controlling the rate of the adsorption reaction. The results of this study show that potentially toxic elements (PETs) pollution in eutrophic shallow lakes may become more serious due to the excessive expansion of algae dominant regions and the reduction of macrophyte dominant regions. In addition, risk analysis and assessment of PETs should consider the contribution of metal binding capabilities.