OBJECTIVE: To three-dimensionally assess differences in craniomaxillofacial skeletal development in patients with operated unilateral cleft lip and palate (UCLP) treated with/without presurgical nasoalveolar molding (PNAM) with a mean age of 5 years.
METHODS: Cone-beam CT radiographs of 30 patients with UCLP who had undergone PNAM and 34 patients with UCLP who did not receive PNAM were analyzed. The data were stored in DICOM file format and were imported into the Dolphin Imaging program for 3D image reconstruction and landmark identification. 33 landmarks, 17 linear and three angular variables representing craniofacial morphology were analyzed and compared by using the Mann-Whitney U tests.
RESULTS: The vast majority of linear variables and 3D coordinates of landmark points reflecting craniofacial skeletal symmetry were not significantly different between the two groups. In terms of craniofacial skeletal development, the PNAM group had a significantly smaller anterior nasal spine offset in the midsagittal plane and a greater maxillary length compared to the non-PNAM group.
CONCLUSIONS: Evaluations performed in early childhood showed that treatment with/without PNAM in the neonatal period was not a major factor influencing craniomaxillofacial hard tissue development in patients with UCLP; moreover, PNAM treatment showed significant correction of skeletal deviation at the base of the nose.
CONCLUSIONS: Follow-up in early childhood has shown that PNAM treatment administered during the neonatal stage does not impede maxillary development and has benefits in correcting nasal floor deviation. It is a viable option for improving nasal deformity in children with unilateral cleft lip and palate.

OBJECTIVE: To investigate the differences of the nasal soft and hard tissue asymmetry in postoperative patients with unilateral cleft lip and palate (UCLP) between adolescence and adulthood, and to explore the correlation of nasal soft and hard tissue asymmetry.
METHODS: CT data from 47 repaired UCLP patients were included and divided into two groups:1. adolescent group: 23 patients (15 males, 8 females; age: 10-12 years old). 2. adult group: 24 patients (16 males, 8 females; age:18-32 years old). The three-dimensional asymmetry in nasal soft and hard tissues was analyzed. Additionally, the correlation between nasal soft and hard tissue asymmetry was also analyzed.
RESULTS: Both the adolescent group and adult group showed asymmetries in nasal soft and hard tissues. Compared to the adolescent group, the adult group had a significantly increased horizontal asymmetry of nasal soft tissues Sbal (P < 0.05). Furthermore, the sagittal asymmetry of soft tissue Glat (P < 0.05), Sbal (P < 0.001), Sni (P < 0.001) and hard tissue LPA (P < 0.05) also increased significantly. In the adult group, there were more landmarks with a correlation between the asymmetry of nasal hard tissue and soft tissue compared to the adolescent group. There were moderate to strong correlations between nasal hard and soft tissue symmetries in the horizontal and sagittal directions (0.444 < r < 764), but no correlation in the vertical direction in the adult group (P > 0.05).
CONCLUSIONS: The asymmetry of nasal soft and hard tissues in patients with repaired UCLP becomes more apparent in the horizontal and sagittal dimensions from adolescence to adulthood. The correlation between the asymmetry of nasal hard tissue and soft tissue becomes stronger in the horizontal and sagittal dimensions. These factors should be taken into account when performing treatment for repaired UCLP patients in adolescence and adulthood.

Machine learning based auto-segmentation of 3D images has been developed rapidly in recent years. However, the application of this new method in the research of patients with unilateral cleft lip and palate (UCLP) is very limited. In this study, a machine learning algorithm utilizing 3D U-net was used to automatically segment the maxilla, fill the cleft and evaluate the alveolar bone graft in UCLP patients. Cleft related factors and the surgery impact on the development of maxilla were analyzed.
Preoperative and postoperative computed tomography images of 32 patients (64 images) were obtained. The deep-learning-based protocol was used to segment the maxilla and defect, followed by manual refinement. Paired t-tests and Mann-Whitney tests were performed to reveal the changes of the maxilla after surgery. Two-factor, two-level analysis for repeated measurement was used to examine the different trends of growth on the cleft and non-cleft sides of the maxilla. Pearson and Spearman correlations were used to explore the relationship between the defect and the changes of the maxillary cleft side.
One-year after the alveolar bone grafting surgery, different growth amount was found on the cleft and non-cleft sides of maxilla. The maxillary length (from 34.64 ± 2.48 to 35.67 ± 2.45 mm) and the alveolar length (from 36.58 ± 3.21 to 37.63 ± 2.94 mm) increased significantly only on the cleft side while the maxillary anterior width (from 11.61 ± 1.61 to 12.01 ± 1.41 mm) and posterior width (from 29.63 ± 2.25 to 30.74 ± 2.63 mm) increased significantly only on the non-cleft side after surgery. Morphology of the cleft was found to be related to the pre-surgical maxillary dimension on the cleft side, while its correlation with the change of the maxilla after surgery was low or not statistically significant.
The auto-segmentation of the maxilla and the cleft could be performed very efficiently and accurately with the machine learning method. Asymmetric growth was found on the cleft and non-cleft sides of the maxilla after alveolar bone graft in UCLP patients. The morphology of the cleft mainly contributed to the pre-operation variance of the maxilla but had little impact on the maxilla growth after surgery.

Patients with unilateral cleft lip and palate were associated with different nasomaxillary complex from the normal population. Although the biomechanical effects of conventional rapid palatal expansion (Hyrax expansion) and bone-borne rapid palatal expansion (micro-implant-assisted expansion) in non-cleft patients have been identified by multiple studies, little is known in patients with unilateral cleft lip and palate. The purpose of this study was to investigate and compare the biomechanical effects of the conventional and bone-borne palatal expanders in a late adolescence with unilateral cleft lip and palate.
A cone beam CT scan of a late adolescence with unilateral cleft lip and palate was selected to construct the three-dimensional finite element models of teeth and craniofacial structures. The models of conventional and born-borne palatal expanders were established to simulate the clinical maxillary expansion. The geometric nonlinear theory was applied to evaluate the Von Mises stress distribution and displacements in craniofacial structures and teeth.
Bone-borne palatal expander achieved more transverse movement than conventional palatal expander in the whole mount of craniofacial regions, and the maximum amount of expansion was occurred anteriorly along the alveolar ridge on cleft-side. The expanding force from born-borne palatal expander resulted in more advancement in nasomaxillary complex than it in conventional palatal expander, especially in the anterior area of the minor segment of maxilla. Stresses from the both expanders distributed in similar patterns, but larger magnitudes and ranges were generated using the bone-borne expander around the maxillary buttresses and pterygoid plates of sphenoid bone. The maximum expanding stresses from born-borne palatal expander were concentrated on palatal slope supporting minscrews, whereas those from conventional palatal expander were concentrated on the anchoring molars. In addition, the buccal tipping effect of teeth generated using the bone-borne expander was less than it using the conventional palatal expander.
Bone-borne expander generated enhanced skeletal expansion at the levels of alveolar and palate in transversal direction, where the miniscrews contributed increased expanding forces to maxillary buttresses and decreased forces to buccal alveolar. Bone-borne expanders presented a superiority in correcting the asymmetric maxilla without surgical assistant in late adolescence with unilateral cleft lip and palate.

To investigate and compare the effects of maxillary protraction therapy on Class III patients with unilateral cleft lip and palate (UCLP) and Class III patients with noncleft.
Prospective controlled clinical trial.
Twenty-six Class III patients with UCLP (mean age: 10.32 ± 1.29 years) and 26 Class III patients with noncleft (mean age: 9.82 ± 1.03 years) were included and treated with maxillary protraction therapy.
Maxillary protraction therapy was performed with an intraoral Hyrax appliance and extraoral facemask. Cone beam computed tomography scans were taken before and after treatment. Pretreatment skeletal and dental characteristics and treatment changes were analyzed and compared.
The average treatment duration was 18.44 ± 4.16 months in the UCLP group, which was substantially longer than the 12.46 ± 4.03-month average treatment duration in the noncleft group (P < .001). No significant difference was found in the maxillary changes (length, advancement of point A, and SNA angle) and improvement of intermaxillary relationship (ANB angle) between the 2 groups. The UCLP group had 1.40° more mandibular clockwise rotation (P = .034). Regarding dental changes, the UCLP group had more upper incisor proclination (P = .006) and less lower incisor retroclination (P = .023).
Approximately extended maxillary protraction therapy in patients with UCLP could be as effective as in patients with noncleft. Further study is required to follow patients until completion of growth to elucidate the long-term stability of the treatment.