An electrochemical aptasensor was developed by utilizing a DNA walker driven by catalytic hairpin assembly (CHA) with kanamycin as the model analyte. Kanamycin bound to the aptamer, causes the release of DNA walker, triggers the CHA reaction, leads to the cyclic movement of the walker\'s long arm, and results in cascade amplification of the signal. The guanine-rich sequences of the double-stranded products produced by CHA were folded to form G-quadruplex structures, with electrochemical active molecules Hemin embedded, forms G-quadruplex/Hemin complexes in situ on the electrode surface, thereby achieving sensitive, efficient, and label-free detection of kanamycin with a limit of detection (LOD) of 0.27 pM (S/N = 3). Meaningfully, the aptasensor demonstrated high sensitivity and reliability in the detection of kanamycin in milk and livestock wastewater samples, suggesting that it has great potential for application in detecting antibiotics in food products and water samples from the environment.

UNASSIGNED: Methyltransferase-like 3 (METTL3), a component of the N6-methyladenosine (m6A) methyltransferase family, exhibits significant expression in HEI-OC1 cells and cochlear explants. Aminoglycoside antibiotics, known for their ototoxic potential, frequently induce irreversible auditory damage in hair cells, predominantly through oxidative stress mechanisms. However, the specific role of METTL3 in kanamycin-induced hair cell loss remains unclear.
UNASSIGNED: This study aims to elucidate the mechanisms by which METTL3 contributes to kanamycin-induced ototoxicity.
UNASSIGNED: In vivo experiments demonstrated a notable reduction in METTL3 expression within cochlear explants following kanamycin administration, concomitant with the formation of stress granules (SGs). Similarly, a 24-hour kanamycin treatment led to decreased METTL3 expression and induced SG formation both in HEI-OC1 cells and neonatal cochlear explants, corroborating the in vivo observations. Lentivirus-mediated transfection was employed to overexpress and knockdown METTL3 in HEI-OC1 cells. Knockdown of METTL3 resulted in increased reactive oxygen species (ROS) levels and apoptosis induced by kanamycin, while concurrently reducing SG formation. Conversely, overexpression of METTL3 attenuated ROS generation, decreased apoptosis rates, and promoted SG formation induced by kanamycin. Therefore, METTL3-mediated SG formation presents a promising target for mitigating kanamycin-induced ROS generation and the rate of apoptosis.
UNASSIGNED: This finding indicates that METTL3-mediated SG formation holds potential in mitigating kanamycin-induced impairments in cochlear hair cells by reducing ROS formation and apoptosis rates.

A novel \"turn-on\" aptasensor for kanamycin (Kana) detection based on a new Förster resonance energy transfer (FRET) pair is reported. A new organic small molecule was employed as a high-efficiency quencher for fluorophore. Based on specific interactions between ssDNA and the quencher, an ingenious and amplified strategy was designed. In the absence of the target, the fluorescence of the fluorophore labeled at the end of the aptamer was quenched. After the binding of the aptamer to the target, the fluorescence was recovered and amplified. The proposed aptasensor showed high specificity, selectivity, and stability in complicated systems. With the P3-based strategy, the limit of detection for Kana is estimated to be 10 nM, which is much lower than the maximum allowable concentration in milk. The recoveries of spiked Kana in milk were in the range 99.8 ~ 105.3% (n = 3). Fortunately, this novel method can be easily extended to other antibiotics such as tobramycin by simply replacing the aptamer, showing great potential as a universal platform for selective, sensitive, and rapid detection of hazardous analytes in food samples.

As a kind of aminoglycoside antibiotics, kanamycin (KAN) is widely applied to animal husbandry and aquaculture. However, the abuse of KAN causes the large-scale discharge of it into rivers, lakes and groundwater, which threatens environmental safety and human health. Therefore, it is imperative to develop a method that is applicable to detect KAN in an efficient and accurate way. The colorimetric method based on enzymes provides a feasible solution for the detection of organic pollutants. However, the extensive application of natural enzymes is constrained by high cost and low stability. Herein, a polyoxometalate-based nanozyme, namely [H7SiW9V3O40(DPA)3]·4H2O (SiW9V3/DPA) (DPA = dipyridylamine), is synthesized. As a low-cost nanozyme with high stability compared to natural enzymes, SiW9V3/DPA performs well in laccase-mimicking activity. It can be used to induce chromogenic reaction between 2,4-dichlorophenol (2,4-DP) and 4-aminoantipyrine (4-AP), which generates red products. With the addition of KAN, the color fades. That is to say, KAN can be detected with colorimetric assay in the concentration range 0.1 to 100 μM with high selectivity and low limit of detection (LOD) of 6.28 μM. Moreover, SiW9V3/DPA is applied to KAN detection in lake and river water and milk with satisfactory results. To sum up, polyoxometalate-based nanozyme is expected to provide a promising solution to the detection of organic pollutants in the aquatic environment.

Excessive use of antibiotics will enter the water environment and soil through the biological chain, and then transfer to the human body through food, resulting in drug resistance, kidney toxicity and other health problems, so it is urgent to develop highly sensitive detection methods of antibiotics. Here, we designed a dual-mode sensor platform based on closed bipolar electrode (cBPE) electroluminescence (ECL) and mobile phone imaging to detect kanamycin in seawater. The prepared CN-NV-550 displayed extremely intense ECL signal, allowing for convenient mobile phone imaging. The cBPE was combined with DNA cycle amplification technology to prevent the mutual interference between target and the luminescent material, and realized the amplification of signal. In the presence of target Kana, Co3O4 was introduced to the cBPE anode by DNA cycle amplification product, and accelerated the oxidation rate of uric acid (UA). Thus, the electroluminescence response of CN-NV-550 on cBPE cathode was much improved due to the charge balance of the cBPE, achieving both ECL detection and mobile phone imaging assay of Kana, which much improved the accuracy and efficiency of assay. The limit of detection (LOD) in this work is 0.23 pM, and LOD for mobile phone imaging is 0.39 pM. This study integrate ECL imaging visualization of CN-NV-550 and high electrocatalytic activity of Co3O4 into cBPE-ECL detection, providing a new perspective for antibiotic analysis, and has great potential for practical applications, especially in Marine environmental pollution monitoring.

UNASSIGNED: Aminoglycoside-modifying enzymes (AMEs) play an essential role in bacterial resistance to aminoglycoside antimicrobials. With the development of sequencing techniques, more bacterial genomes have been sequenced, which has aided in the discovery of an increasing number of novel resistance mechanisms.
UNASSIGNED: The bacterial species was identified by 16S rRNA gene homology and average nucleotide identity (ANI) analyses. The minimum inhibitory concentration (MIC) of each antimicrobial was determined by the agar dilution method. The protein was expressed with the pCold I vector in E. coli BL21, and enzyme kinetic parameters were examined. The whole-genome sequence of the bacterium was obtained via the Illumina and PacBio sequencing platforms. Reconstruction of the phylogenetic tree, identification of conserved functional residues, and gene context analysis were performed using the corresponding bioinformatic techniques.
UNASSIGNED: A novel aminoglycoside resistance gene, designated aph(3\')-Ie, which confers resistance to ribostamycin, kanamycin, sisomicin and paromomycin, was identified in the chromosome of the animal bacterium Citrobacter gillenii DW61, which exhibited a multidrug resistance phenotype. APH(3\')-Ie showed the highest amino acid identity of 74.90% with the functionally characterized enzyme APH(3\')-Ia. Enzyme kinetics analysis demonstrated that it had phosphorylation activity toward four aminoglycoside substrates, exhibiting the highest affinity (K m, 4.22 ± 0.88 µM) and the highest catalytic efficiency [k cat/K m, (32.27 ± 8.14) × 104] for ribomycin. Similar to the other APH(3\') proteins, APH(3\')-Ie contained all the conserved functional sites of the APH family. The aph(3\')-Ie homologous genes were present in C. gillenii isolates from different sources, including some of clinical significance.
UNASSIGNED: In this work, a novel chromosomal aminoglycoside resistance gene, designated aph(3\')-Ie, conferring resistance to aminoglycoside antimicrobials, was identified in a rabbit isolate C. gillenii DW61. The elucidation of the novel resistance mechanism will aid in the effective treatment of infections caused by pathogens carrying such resistance genes.

The abuse of kanamycin (KAN) poses an increasing threat to human health by contaminating agricultural and animal husbandry products, drinking water, and more. Therefore, the sensitive detection of trace KAN residues in real samples is crucial for monitoring agricultural pollution, ensuring food safety, and diagnosing diseases. However, traditional assay techniques for KAN rely on bulky instruments and complicated operations with unsatisfactory detection limits. Herein, we developed a novel label-free aptasensor to achieve ultrasensitive detection of KAN by constructing mesoporous DNA-cobalt@carbon nanofibers (DNA-Co@C-NFs) as the recognizer. Leveraging the extended π-conjugation structure, prominent surface area, and abundant pores, the Co@C-NFs can effectively load aptamer strands via π-π stacking interactions, serving as KAN capturer and reporter. Due to the change in DNA configuration upon binding KAN, this aptasensor presented an ultralow detection limit and ultra-wide linear range, along with favorable precision and selectivity. Using real tap water, milk, and human serum samples, the aptasensor accurately reported trace KAN levels. As a result, this convenient and rapid autosensing technique holds promise for onsite testing of other antibiotic residues in agriculture, food safety, and clinical diagnosis.

Rare earth (RE)-doped CaS phosphors have been widely used as light-emitting components in various fields. Nevertheless, the application of nanosized CaS particles is still significantly limited by their poor water resistance and weak luminescence. Herein, a lattice-matching strategy is developed by growing an inert shell of cubic NaYF4 phase on the CaS luminescent core. Due to their similarity in crystal structure, a uniform core-shell heterostructure (CaS:Ce3+@NaYF4) can be obtained, which effectively protects the CaS:Ce3+ core from degradation in aqueous environment and enhances its luminescence intensity. As a proof of concept, a label-free aptasensor is further constructed by combining core-shell CaS:Ce3+@NaYF4 and Au nanoparticles (AuNPs) for the ultrasensitive detection of kanamycin antibiotics. Based on the efficient FRET process, the detection linear range of kanamycin spans from 100 to 1000 nM with a detection limit of 7.8 nM. Besides, the aptasensor shows excellent selectivity towards kanamycin antibiotics, and has been successfully applied to the detection of kanamycin spiked in tap water and milk samples, demonstrating its high potential for sensing applications.

Herein, a new dual-model photoelectrochemical (PEC)/electrochemical (EC) sensor based on Z-scheme titanium dioxide (TiO2) disk/methylene blue (MB) sensibilization for the detection of kanamycin (Kana) was developed. Metal-organic framework-derived porous TiO2 disks were synthesized and exhibited excellent anodic photocurrent under visible light excitation. Subsequently, amino-labeled double-stranded DNA (dsDNA) was introduced into the modified electrode. Photocurrent was enhanced with MB embedded in dsDNA to form Z-scheme TiO2/MB sensibilization. When the target, Kana, was present, it specifically bound to the aptamer in the dsDNA, leading to the disruption of the dsDNA structure and the release of MB. This release of MB and the increase in target spatial resistance resulted in a significant weakening of PEC signal and a decreased oxidation peak current of MB. The PEC sensor successfully detected Kana in the range of 2-1000 pM with an LOD of 0.17 pM. Meanwhile, the EC sensor for Kana detection showed a linear range of 5-500 pM with an LOD of 1.8 pM. Additionally, the sensor exhibited excellent selectivity, reproducibility, stability, and good recoveries when applied to milk and honey samples. As a result, this method has the potential for application in ensuring food safety through the rapid determination of antibiotics in food.

BACKGROUND: Kanamycin (KAN) residues in animal-derived foods continuously enter the human body, which will pose serious threats to human health such as hearing loss, nephrotoxicity and other complications. Therefore, to sensitively detect KAN residues by a reliable technology is extremely urgent in food quality and safety. Compared with traditional methods being limited by cost and complexity, photoelectrochemical (PEC) biosensors benefit from some merits such as rapid response, excellent sensitivity and good stability. In this study, the construction of a highly efficient PEC platform to realize KAN residues detection is discussed.
RESULTS: Herein, a novel p-n heterojunction consisting of flower-like BiOI microspheres and graphite carbon nitride (g-C3N4) nanoflakes was developed to establish a PEC aptasensor for KAN detection at 0 V. The prepared g-C3N4/BiOI heterostructure showed not only significantly enhanced PEC activity due to the larger specific surface area but also greatly increased charge separation efficiency owing to the strong internal electric field. Meanwhile, using g-C3N4/BiOI as a highly efficient photoactive material for binding amine-functionalized aptamers to capture KAN, the photocurrent signals showed a \'turn off\' mode to achieve the sensitive detection of KAN. The proposed PEC aptasensor exhibited linear response for KAN from 5 × 10-9 to 3 × 10-7 mol L-1 with a low detection limit of 1.31 × 10-9 mol L-1, and satisfactory recoveries (97.44-107.38 %) were obtained in real food samples analysis.
CONCLUSIONS: This work presented a novel p-n heterojunction-based PEC aptasensor with strong selectivity and stability, rendering it allowed to detect KAN in animal-derived foods including milk, honey and pork. Additionally, the detection range satisfied the MRLs for KAN specified by the national standards, demonstrating the potential application for food analysis. The study provides a new insight into the development of efficient and practical biosensors for antibiotic residues detection.