Bory Tucholskie National Park, founded in 1996, is one of the most recently established national parks in Poland, and therefore, has not been thoroughly examined yet. The authors of the current study present results of their research concerning communities of mites from the suborder Uropodina (Acari: Mesostigmata), inhabiting bird nesting boxes within the area of Bory Tucholskie National Park. The mite community comprises two nidicolous species, i.e. Leiodinychus orbicularis (C.L. Koch, 1839) and Chiropturopoda nidiphila (Wiśniewski and Hirschmann 1993). The former is a species characteristic of various types of nests, as well as nesting boxes, where it is usually the eudominant species. The latter is an extremely rare and scarce species of Uropodina, known thus far from woodpeckers\' hollows. The population of L. orbicularis in the analysed communities in the realm of Bory Tucholskie National Park has been estimated to be over 6,000 specimens, and in the case of Ch. nidiphila - over 400 specimens.

暂无摘要。

Bio-ingestion of microplastics poses a global threat to ecosystems, yet studies within nature reserves, crucial habitats for birds, remain scarce despite the well-documented ingestion of microplastics by avian species. Located in Jiangsu Province, China, the Yancheng Wetland Rare Birds Nature Reserve is home to diverse bird species, including many rare ones. This study aimed to assess the abundance and characteristics of microplastics in common bird species within the reserve, investigate microplastic enrichment across different species, and establish links between birds\' habitat types and microplastic ingestion. Microplastics were extracted from the feces of 110 birds, with 84 particles identified from 37.27% of samples. Among 8 species studied, the average microplastic abundance ranged from 0.97 ± 0.47 to 43.43 ± 61.98 items per gram of feces, or 1.5 ± 0.87 to 3.4 ± 1.50 items per individual. The Swan goose (Anser cygnoides) exhibited the highest microplastic abundance per gram of feces, while the black-billed gull (Larus saundersi) had the highest abundance per individual. The predominant form of ingested microplastics among birds in the reserve was fibers, with polyethylene being the most common polymer type. Significant variations in plastic exposure were observed among species and between aquatic and terrestrial birds. This study represents the first quantitative assessment of microplastic concentrations in birds within the reserve, filling a crucial gap in research and providing insights for assessing microplastic pollution and guiding bird conservation efforts in aquatic and terrestrial environments.

暂无摘要。

A significant body of evidence indicates that climate change is influencing many aspects of avian ecology. Yet, how climate change is affecting, and is expected to influence some aspects of the breeding ecology of cavity-nesting birds remains uncertain. To explore the potential linkage between timing of first clutch, and the influence of ambient temperature on hatching success, we used Eastern Bluebird (Sialia sialis) nest records over a nine-year period from Alabama, USA. We investigated changes to annual clutch initiation dates, as well as variability in hatching success associated with ambient air temperatures during the incubation period. Using a simple linear model, we observed earlier annual egg laying dates over the nine years of this study with a difference of 24 days between earliest egg-laying date of the season. Daily temperature minima increased 2 °C across the nine-year time frame of this study. These data also indicate that Eastern Bluebird hatching success was the highest when mean ambient air temperature during incubation was between 19 °C and 24 °C (78%, as opposed to 69% and 68% above and below this temperature range, respectively). Our findings of increasing maxima, earlier maxima each year, and the lower minima of temperatures within our study area could expand the breadth of temperatures experienced by nesting Eastern Bluebirds possibly exposing them to temperatures outside of what promotes nesting success. These findings with a cavity-nesting bird highlight an optimal range of ambient temperatures associated with highest hatching success, conditions likely to be affected by climate change.

A black skimmer (Rynchops niger) and a brown booby (Sula leucogaster) were rescued and gross, histopathological, immunohistochemical and polymerase chain reaction evaluations were conducted to investigate the cause of death. There were neoplastic infiltrations of CD3+ PAX5- lymphocytes in the black skimmer and CD3- PAX5+ lymphocytes in the brown booby. Molecular assays for viral agents were negative in both cases. This is the first report of disseminated lymphoma as the cause of stranding and death in these species in Brazil.

The disturbance of infrastructures may affect biological communities that are exposed to them. This study assesses the impact of high-speed (highway and railway) infrastructures in a protected study site, the Natural Reserve Fontanili di Corte Valle Re (Emilia-Romagna, Italy). We compared bird diversity with sound intensity and frequency in three sampling areas, increasingly distant from the infrastructures at the border with the reserve, during the last 4 years (2019-2022), monitoring sedentary, nesting, and migratory bird species. We hypothesize a decreasing diversity closer to the source of disturbance, which is mostly attributable to noise pollution. Our findings confirmed this trend, and we show that, in particular, disturbance seems to influence species richness more than the total abundance of birds. We also discovered that highway disturbance was much higher than railway in terms of frequency and duration. In light of these results, we suggest that some species, which have a behavioral ecology strongly based on singing to communicate with each other for their reproductive and defensive strategies, may suffer more from constant acoustic disturbance. The installation of effective noise barriers to shield the sound produced by the highways should be considered a mandatory request not only in proximity to houses but also in the vicinity of protected areas.

Infectious disease agents can influence each other\'s dynamics in shared host populations. We consider such influence for two mosquito-borne infections where one pathogen is endemic at the time that a second pathogen invades. We regard a setting where the vector has a bias towards biting host individuals infected with the endemic pathogen and where there is a cost to co-infected hosts. As a motivating case study, we regard Plasmodium spp., that cause avian malaria, as the endemic pathogen, and Usutu virus (USUV) as the invading pathogen. Hosts with malaria attract more mosquitoes compared to susceptible hosts, a phenomenon named vector bias. The possible trade-off between the vector-bias effect and the co-infection mortality is studied using a compartmental epidemic model. We focus first on the basic reproduction number R0 for Usutu virus invading into a malaria-endemic population, and then explore the long-term dynamics of both pathogens once Usutu virus has become established. We find that the vector bias facilitates the introduction of malaria into a susceptible population, as well as the introduction of Usutu in a malaria-endemic population. In the long term, however, both a vector bias and co-infection mortality lead to a decrease in the number of individuals infected with either pathogen, suggesting that avian malaria is unlikely to be a promoter of Usutu invasion. This proposed approach is general and allows for new insights into other negative associations between endemic and invading vector-borne pathogens.

Birds are excellent bioindicators of environmental pollution, and blood provides information on contaminant exposure, although its analysis is challenging because of the low volumes that can be sampled. The objective of the present study was to optimize and validate a miniaturized and functional extraction and analytical method based on gas chromatography coupled to Orbitrap mass spectrometry (GCOrbitrap-MS) for the trace analysis of contaminants in avian blood. Studied compounds included 25 organochlorine pesticides (OCPs), 6 polychlorinated biphenyls (PCBs), 8 polybrominated diphenyl ethers (PBDEs) and 15 polycyclic aromatic hydrocarbons (PAHs). Four extraction and clean-up conditions were optimized and compared in terms of efficiency, accuracy, and uncertainty assessment. Extraction with hexane:dichloromethane and miniaturized Florisil pipette clean-up was the most adequate considering precision and accuracy, time, and costs, and was thereafter used to analyse 20 blood samples of a pelagic seabird, namely the Bermuda petrel (Pterodroma cahow). This species, endemic to the Northwest Atlantic, is among the most endangered seabirds of the region that in the \'60 faced a decrease in the breeding success likely linked to a consistent exposure to dichloro-diphenyl-trichloroethane (DDT). Indeed, p,p\'-DDE, the main DDT metabolite, was detected in all samples and ranged bewteen 1.13 and 6.87 ng/g wet weight. Other ubiquitous compounds were PCBs (ranging from 0.13 to 6.76 ng/g ww), hexachlorobenzene, and mirex, while PAHs were sporadically detected at low concentrations, and PBDEs were not present. Overall, the extraction method herein proposed allowed analysing very small blood volumes (∼ 100 µL), thus respecting ethical principles prioritising the application of less-invasive sampling protocols, fundamental when studying threatened avian species.

Regardless of the species, birds are exposed to injuries that lead to amputation of part of the body structure and often euthanasia. Based on the need for new technologies that improve the quality of life of birds with locomotor problems, the present case reports aimed to describe the development of custom-made three-dimensional (3D) prostheses for domestic and wild birds that suffered amputation or malformation of the hind limb. Using the measurements of the bird, a digital model was created for 3D printing using fused deposition modeling technology (FDM) by the Brazilian company 3D Medicine. In this study we report the use of 3D prosthesis for the rehabilitation of three birds with locomotor disorders in Brazil, the animals adapted to the custom-made prosthesis with an improvement in quality of life, better distribution of body weight, locomotion, and landing. This study describes the development of 3D prostheses for birds in Brazil, the first report of this technology for these species, and the pioneering development of socket prostheses for small birds. 3D prostheses offer a high-efficiency solution to improve the quality of life of animals with amputations and malformations of the hind limbs. In addition, 3D technology provides valuable tools for veterinary medicine, developing custom-made models for the most different anatomical demands of animal patients.