In this work, a moving bed biofilm reactor (MBBR) was equipped for simultaneous biodegradation of CS2 and H2S. MBBR was started up and operated with different inlet concentrations and retention time; results indicated that approximately 81.9% CS2 and 93.9% H2S could be degraded, and the maximum elimination capacities of 209.3 g/(m3·h) and 138.5 g/(m3·h) were achieved for CS2 and H2S, respectively. The biodegradation mechanisms, including mass transfer, kinetics, and electron transfer, were then investigated. The mass transfer fraction and the maximum degradation rate per unit filter volume were calculated for evaluating the characteristics of mass transfer in MBBR. The variations of extracellular polymeric substances secretion, electron transport system activity and ATP enzyme activity showed that MBBR had an excellent performance for waste gas purification. Subsequently, the recovery of sulfur was explored via morphology, crystal structure, and generation kinetics, indicating that a modified Gompertz model could precisely describe the kinetics of sulfur recovery, and the product selectivity of 51.7% was achieved for sulfur. The microbial community analysis suggested that the dominant genera for biodegradation and sulfur recovery were Acidithiobacillus and Mycobacterium. Finally, MBBR system was validated for treatment of actual waste gas; results indicated that maximum elimination capacities of 134.1 g/(m3·h) and 117.1 g/(m3·h) were obtained for CS2 and H2S, respectively, suggesting that MBBR had the potential for application.

Mg-based and Zn-based biodegradable materials have the potential to become the next-generation implant materials to treat bone diseases, because of their desired degradation and mechanical properties. This article reviews the status of these implant materials. The required properties of biodegradable materials such as biodegradability, mechanical properties, and biocompatibility for performance evaluation were briefly discussed. The influence of fabrication techniques, microstructure, alloying elements, and post-processing techniques on the properties of Mg and Zn-based materials was addressed. The degradation mechanism by dissolution, oxidation, and interaction with human body cells was discussed. The biocompatibility of Mg and Zn-based biodegradable materials was analyzed. The significance of in vitro and in vivo biocompatibility testing was highlighted, emphasizing the superiority of in vivo results over cell line studies. This article identifies the many Mg and Zn-based biodegradable materials and summarizes the key findings.

A degradation mechanism of polystyrene (PS) in mealworms reared on expanded PS (EPS) was investigated by its decrease in molecular weight and change in chemical structure. A 33% decrease in molecular weight was observed for the digested PS in the frass after 1 week of feeding to mealworms. The FT-IR and py-GC/MS spectra of the digested PS showed radical oxidative reactions taking place in the mealworm body. The presence of hydroperoxide, alcohol and phenol groups was confirmed, and dimer fragments of styrene with quinone and phenol groups were obtained. The decrease in molecular weight and the alternation of benzene rings indicated that autoxidation and quinonization via phenolic intermediates occurred simultaneously in the mealworm body. The survival rate of mealworms reared on EPS was higher than that of starved worms, indicating that EPS was a nutrient source. However, no weight gain was observed in mealworms fed EPS alone. Comparison with the mixed diets with bran or urethane foams (PU) indicated that protein, phosphorus and magnesium components absent from EPS were required for mealworm growth.

The Nanhai No. 1 shipwreck is an ancient wooden ship in the Southern Song Dynasty. Currently, serious challenges of microbial diseases exist on the hull wood. This study aimed to obtain microbial samples from the ship hull in December 2021 and analyze the microbial diseases through scanning electron microscopy and high-throughput sequencing to preserve the Nanhai No. 1 shipwreck. The biodegradation mechanism of diseased microorganisms was explored through whole genome sequencing and the detection of enzyme activity and gene expression levels of diseased microorganisms under different conditions. The results showed that there was obvious fungal colonization on the surface of the hull wood and Fusarium solani NK-NH1 was the dominant disease fungus on the surface. NK-NH1 has strong cellulose and lignin degradation ability. Its whole genome size is 52,389,955 bp, and it contains 17,402 genes. It has a variety of key enzyme genes involved in cellulose and lignin degradation. The NK-NH1 dominant degrading enzyme lignin peroxidase has the highest enzyme activity at pH = 4, NaCl concentration of 30%, and FeSO4 concentration of 50 mg/L, while laccase has the highest enzyme activity at pH = 4, NaCl concentration of 10%, and FeSO4 concentration of 100 mg/L. The above research results prove that NK-NH1 is a key fungus to the biodegradation of ship hull wood when it is exposed to air, low pH, high salt, and rich in sulfur iron compounds. This study provides a theoretical basis for the preservation of the Nanhai No. 1 shipwreck.

Phthalic acid esters (PAEs) plasticizers are virulent endocrine disruptors that are mixed into plastics while fabricating and can filter out once they release into the surrounding environments. Plastic surfaces serve as new habitats for microorganisms, referred to as \'plastisphere\'. Previous metagenomic investigations of the \'plastisphere\' indicated that marine plastic surfaces may harbor microbes that degrade PAEs plasticizers. To our knowledge, the potential of microorganisms in the marine \'plastisphere\' to metabolize PAEs is poorly understood. In this study, by screening the natural microbial community on plastic debris that had been deployed in situ for up to 20 months, a novel marine bacterium, Microbacterium esteraromaticum DEHP-1, was successfully isolated, which could degrade and mineralize 10-200 mg/L dibutyl phthalate (DBP) and bis(2-ethylhexyl) phthalate (DEHP). According to the results of gas chromatography-mass spectrometry (GC-MS) and whole genome mining of strain DEHP-1, we found that strain DEHP-1 may metabolize DBP by successive removal of the ester side chain by esterase 2518 to produce mono-butyl phthalate (MBP) and phthalic acid (PA), whereas the degradation of DEHP may take place by the direct action of monooxygenase 0132 on the fatty acid side chain of the DEHP molecule to produce di-n-hexyl phthalate (DnHP) and DBP, and then the subsequent hydrolysis of DBP by de-esterification to PA and finally into the tricarboxylic acid (TCA) cycle. Non-targeted metabolomics results showed that intracellular degradation of PAEs did not happen. However, exposure to PAEs was found to significantly affect pathways such as arginine and proline, riboflavin, glutathione and lysine degradation. Therefore, the intracellular metabolic behavior of strain DEHP-1 exposed to PAEs was proposed for the first time. This study sheds light on the metabolic capacity and strategies of bacteria in the marine \'plastisphere\' to effectively degrade PAEs and highlights the importance of marine microbes in mitigating plastic poisonousness.

The extensive utilization and inadequate handling of plastics have resulted in severe environmental ramifications. In particular, plastics composed solely of a carbon-carbon (C-C) backbone exhibit limited degradation due to the absence of hydrolyzable functional groups. Plastics with enduring longevity in the natural environment are susceptible to environmental factors and their intrinsic properties, subsequently undergoing a series of aging processes that culminate in biodegradation. This article focuses on polystyrene (PS), which constitutes 20% of total plastic waste, as a case study. Initially, the application of PS in life and the impacts it poses are introduced. Following that, the key factors influencing the aging of PS are discussed, primarily encompassing its properties (e.g., surface characteristics, additives) and environmental factors (e.g., water matrices, biofilms). Lastly, an overview of microbial degradation of PS is provided, including potential microorganisms involved in PS degradation (bacteria, fungi, algae, and insects), four processes of microbial degradation (colonization, bio-fragmentation, assimilation, and mineralization), and potential mechanisms of microbial degradation. This study provides a comprehensive understanding of the multifaceted influences affecting the aging and biodegradation mechanisms of PS, thereby contributing valuable insights for the future management of plastic pollution.

Microbial co-culture has been proven as an effective technique for environmental remediation. In this study, co-culture mechanism of Rhodococcus ruber HJM-8 and Paracoccus communis YBH-X during N,N-dimethylacetamide (DMAC) degradation was studied. The comparison of degradation performance in monoculture and co-culture was presented; due to the efficient cooperation between the two strains via parallel and cascaded degradation, the removal efficiency of total nitrogen (TN) in co-culture could reach 90.1%, which was 1.35 and 1.21 times higher than that of HJM-8 and YBH-X, respectively. Then the communication mode of co-culture during DMAC degradation was determined as contact-independent and contact-dependent interactions between microorganisms. Meanwhile, intercellular nanotube between HJM-8 and YBH-X was found as a unique contact-dependent interaction. The cell staining experiments and RNA sequencing analyses revealed that the nanotube could be used as a bridge to exchange cytoplasmic molecules, and thus improved material transfer and enhanced cell connection in co-culture. The results of KEGG pathway showed that differentially expressed genes in co-culture have an association with cell metabolism, nanotube generation, and genetic material transfer. Furthermore, a mechanism diagram of DMAC biodegradation was proposed for co-culture, indicating that bidirectional cooperation was established between HJM-8 and YBH-X which was mediated by the conversions of acetate and nitrogen. Finally, the co-culture system was validated for treatment of an actual wastewater; results indicated that removal efficiencies of 100% and 68.2% were achieved for DMAC and TN, respectively, suggesting that co-culture had the potential for application.

Antibiotic resistance residual in piggery wastewater poses serious threat to environment and human health. Biological treatment process is commonly installed to remove nutrient from piggery wastewater and also effective in removing antibiotics to varying degrees. But the specific pathways and mechanisms involved in the removal of antibiotic resistance are not yet well-understood. An integrated anaerobic-aerobic biofilm reactor (IAOBR) has been demonstrated efficient in removing conventional nutrients. It is here shown that the IAOBR effectively removed 79.0% of Sulfonamides, 55.7% of Tetracyclines and 53.6% of Quinones. Antibiotic resistance bacteria (ARB) were simultaneously inactivated by ~0.5 logs. Antibiotic resistance genes (ARGs) and mobile genetic elements (MGEs) were decreased by 0.51 logs and 0.42 logs, respectively. The antibiotics were mainly removed through aerobic compartments of the IAOBR. The mass loss of antibiotics in the reactor was achieved by biodegradation and adsorption, accounting for 52.1% and 47.9%, respectively. An obvious accumulation of ARGs was observed in the activated sludge. The potential host of ARGs was analyzed via microbial community and network. Partial least squares-structural equation model and correlation analysis revealed that the enrichment of ARGs was positively affected by MGEs, followed by bacterial community and ARBs, but the effect of antibiotics on ARGs was negative. Outcomes of this study provide valuable insights into the mechanisms of antibiotic resistance removal in biological treatment processes.

As the ecological niche most closely associated with polymers, microorganisms in the \'plastisphere\' have great potential for plastics degradation. Microorganisms isolated from the \'plastisphere\' could colonize and degrade commercial plastics containing different additives, but the observed weight loss and surface changes were most likely caused by releasing the additives rather than actual degradation of the plastics itself. Unlike commercial plastics that contain additives, whether marine microorganisms in the \'plastisphere\' have adapted to additive-free plastics as a surface to colonize and potentially degrade is not yet known. Herein, a novel marine bacterium, Exiguobacterium marinum a-1, was successfully isolated from mature \'plastisphere\' that had been deployed in situ for up to 20 months. Strain a-1 could use additive-free polypropylene (PP) films as its primary energy and carbon source. After strain a-1 was incubated with additive-free PP films for 80 days, the weight of films decreased by 9.2%. The ability of strain a-1 to rapidly form biofilms and effectively colonize the surface of additive-free PP films was confirmed by Scanning Electron Microscopy (SEM), as reflected by the increase in roughness and visible craters on the surface of additive-free PP films. Additionally, the functional groups of -CO, -C-H, and -OH were identified on the treated additive-free PP films according to Fourier Transform Infrared (FTIR). Genomic data from strain a-1 revealed a suite of key genes involved in biosurfactant synthesis, flagellar assembly, and cellular chemotaxis, contributing to its rapid biofilm formation on hydrophobic polymer surfaces. In particular, key enzymes that may be responsible for the degradation of additive-free PP films, such as glutathione peroxidase, cytochrome p450 and esterase were also recognized. This study highlights the potential of microorganisms present in the \'plastisphere\' to metabolize plastic polymers and points to the intrinsic importance of the new strain a-1 in the mitigation of plastic pollution.

Antibiotic residues in aquatic environments pose a potential hazard, and microbes, which play important roles in aquatic ecosystems, are vulnerable to the impacts of antibiotics. This study aimed to analyze the research progress, trends, and hot topics of the impact of antibiotics on microbial community and biodegradation mechanism using bibliometric analysis. An in-depth analysis of the publication characteristics of 6143 articles published between 1990 and 2021 revealed that the number of articles published increased exponentially. The research sites have been mainly concentrated in the Yamuna River, Pearl River, Lake Taihu, Lake Michigan, Danjiangkou Reservoir, etc., illustrating that research around the world is not even. Antibiotics could change the diversity, structure, and ecological functions of bacterial communities, stimulate a widespread abundance of antibiotic-resistant bacteria and antibiotic-resistant genes, and increase the diversity of eukaryotes, thus triggering the shift of food web structure to predatory and pathogenic. Latent Dirichlet allocation theme model analysis showed three clusters, and the research hotspots mainly included the effect of antibiotics on the denitrification process, microplastics combined with antibiotics, and methods for removing antibiotics. Furthermore, the mechanisms of microbe-mediated antibiotic degradation were unraveled, and importantly, we provided bottlenecks and future research perspectives on antibiotics and microbial diversity research.