Food safety has garnered global attention, necessitating advanced methods for the quick and accurate detection of contaminants. Sensors, notable for their ease of use, high sensitivity, and fast analysis, are prominent. Two-dimensional (2D) nanomaterials have been employed to improve sensor performance. Particularly, black phosphorus (BP) stands out with its multifunctional capabilities, attributed to unique layered structure, ultra-high charge mobility, easy surface functionalization, enhanced optical absorption, and tunable direct bandgap. These characteristics suggest that BP could significantly enhance sensor selectivity, sensitivity, and response speed for contaminant detection. Despite numerous studies on BP-based sensors in food safety, few reviews have been comprehensively summarized. Moreover, challenges in BP\'s preparation and stability restrict its wider use. This paper reviews recent research on BP\'s role in food safety, covering preparation, passivation, and applications. Through analysis of challenges and prospects, this review aims to provide insightful guidance for upcoming research in this area.

Food safety and authenticity analysis play a pivotal role in guaranteeing food quality, safeguarding public health, and upholding consumer trust. In recent years, significant social progress has presented fresh challenges in the realm of food analysis, underscoring the imperative requirement to devise innovative and expedient approaches for conducting on-site assessments. Consequently, cellulose paper-based devices (PADs) have come into the spotlight due to their characteristics of microchannels and inherent capillary action. This review summarizes the recent advances in cellulose PADs in various food products, comprising various fabrication strategies, detection methods such as mass spectrometry and multi-mode detection, sampling and processing considerations, as well as applications in screening food safety factors and assessing food authenticity developed in the past 3 years. According to the above studies, cellulose PADs face challenges such as limited sample processing, inadequate multiplexing capabilities, and the requirement for workflow integration, while emerging innovations, comprising the use of simplified sample pretreatment techniques, the integration of advanced nanomaterials, and advanced instruments such as portable mass spectrometer and the innovation of multimodal detection methods, offer potential solutions and are highlighted as promising directions. This review underscores the significant potential of cellulose PADs in facilitating decentralized, cost-effective, and simplified testing methodologies to maintain food safety standards. With the progression of interdisciplinary research, cellulose PADs are expected to become essential platforms for on-site food safety and authentication analysis, thereby significantly enhancing global food safety for consumers.

Conductive hydrogels, known for their flexibility, biocompatibility, and conductivity, have found extensive applications in fields such as healthcare, environmental monitoring, and soft robotics. Recent advancements in 3D printing technologies have transformed the fabrication of conductive hydrogels, creating new opportunities for sensing applications. This review provides a comprehensive overview of the advancements in the fabrication and application of 3D-printed conductive hydrogel sensors. First, the basic principles and fabrication techniques of conductive hydrogels are briefly reviewed. We then explore various 3D printing methods for conductive hydrogels, discussing their respective strengths and limitations. The review also summarizes the applications of 3D-printed conductive hydrogel-based sensors. In addition, perspectives on 3D-printed conductive hydrogel sensors are highlighted. This review aims to equip researchers and engineers with insights into the current landscape of 3D-printed conductive hydrogel sensors and to inspire future innovations in this promising field.

The analysis of biomedical signals is a very challenging task. This review paper is focused on the presentation of various methods where biomedical data, in particular vital signs, could be monitored using sensors mounted to beds. The presented methods to monitor vital signs include those combined with optical fibers, camera systems, pressure sensors, or other sensors, which may provide more efficient patient bed monitoring results. This work also covers the aspects of interference occurrence in the above-mentioned signals and sleep quality monitoring, which play a very important role in the analysis of biomedical signals and the choice of appropriate signal-processing methods. The provided information will help various researchers to understand the importance of vital sign monitoring and will be a thorough and up-to-date summary of these methods. It will also be a foundation for further enhancement of these methods.

Living organisms in nature possess diverse and vibrant structural colors generated from their intrinsic surface micro/nanostructures. These intricate micro/nanostructures can be harnessed to develop a new generation of colorful materials for various fields such as photonics, information storage, display, and sensing. Recent advancements in the fabrication of photonic crystals have enabled the preparation of structurally colored materials with customized geometries using 3D printing technologies. Here, a comprehensive review of the historical development of fabrication methods for photonic crystals is provided. Diverse 3D printing approaches along with the underlying mechanisms, as well as the regulation methods adopted to generate photonic crystals with structural color, are discussed. This review aims to offer the readers an overview of the state-of-the-art 3D printing techniques for photonic crystals, present a guide and considerations to fabricate photonic crystals leveraging different 3D printing methods.

The field of the Internet of Things (IoT) is dominating various areas of technology. As the number of devices has increased, there is a need for efficient communication with low resource consumption and energy efficiency. Low Power Wide Area Networks (LPWANs) have emerged as a transformative technology for the IoT as they provide long-range communication capabilities with low power consumption. Among the various LPWAN technologies, Long Range Wide Area Networks (LoRaWAN) are widely adopted due to their open standard architecture, which supports secure, bi-directional communication and is particularly effective in outdoor and complex urban environments. This technology is helpful in enabling a variety of IoT applications that require wide coverage and long battery life, such as smart cities, industrial IoT, and environmental monitoring. The integration of Machine Leaning (ML) and Artificial Intelligence (AI) into LoRaWAN operations has further enhanced its capability and particularly optimized resource allocation and energy efficiency. This systematic literature review provides a comprehensive examination of the integration of ML and AI technologies in the optimization of LPWANs, with a specific focus on LoRaWAN. This review follows the PRISMA model and systematically synthesizes current research to highlight how ML and AI enhance operational efficiency, particularly in terms of energy consumption, resource management, and network stability. The SLR aims to review the key methods and techniques that are used in state-of-the-art LoRaWAN to enhance the overall network performance. We identified 25 relevant primary studies. The study provides an analysis of key findings based on research questions on how various LoRaWAN parameters are optimized through advanced ML, DL, and RL techniques to achieve optimized performance.

Hyperspectral imaging has emerged as an effective powerful tool in plentiful military, environmental, and civil applications over the last three decades. The modern remote sensing approaches are adequate for covering huge earth surfaces with phenomenal temporal, spectral, and spatial resolutions. These features make HSI more effective in various applications of remote sensing depending upon the physical estimation of identical material identification and manifold composite surfaces having accomplished spectral resolutions. Recently, HSI has attained immense significance in the research on safety and quality assessment of food, medical analysis, and agriculture applications. This review focuses on HSI fundamentals and its applications like safety and quality assessment of food, medical analysis, agriculture, water resources, plant stress identification, weed & crop discrimination, and flood management. Various investigators have promising solutions for automatic systems depending upon HSI. Future research may use this review as a baseline and future advancement analysis.

In recent years, advancements in the Internet of Things (IoT), manufacturing processes, and material synthesis technologies have positioned flexible sensors as critical components in wearable devices. These developments are propelling wearable technologies based on flexible sensors towards higher intelligence, convenience, superior performance, and biocompatibility. Recently, two-dimensional nanomaterials known as MXenes have garnered extensive attention due to their excellent mechanical properties, outstanding electrical conductivity, large specific surface area, and abundant surface functional groups. These notable attributes confer significant potential on MXenes for applications in strain sensing, pressure measurement, gas detection, etc. Furthermore, polymer substrates such as polydimethylsiloxane (PDMS), polyurethane (PU), and thermoplastic polyurethane (TPU) are extensively utilized as support materials for MXene and its composites due to their light weight, flexibility, and ease of processing, thereby enhancing the overall performance and wearability of the sensors. This paper reviews the latest advancements in MXene and its composites within the domains of strain sensors, pressure sensors, and gas sensors. We present numerous recent case studies of MXene composite material-based wearable sensors and discuss the optimization of materials and structures for MXene composite material-based wearable sensors, offering strategies and methods to enhance the development of MXene composite material-based wearable sensors. Finally, we summarize the current progress of MXene wearable sensors and project future trends and analyses.

Graphene, a 2D nanomaterial, has garnered significant attention in recent years due to its exceptional properties, offering immense potential for revolutionizing various technological applications. In the context of the Internet of Things (IoT), which demands seamless connectivity and efficient data processing, graphene\'s unique attributes have positioned it as a promising candidate to prevail over challenges and optimize IoT systems. This review paper aims to provide a brief sketch of the diverse applications of graphene in IoT, highlighting its contributions to sensors, communication systems, and energy storage devices. Additionally, it discusses potential challenges and prospects for the integration of graphene in the rapidly evolving IoT landscape.

Pelvic floor dysfunction is a common problem in women and has a negative impact on their quality of life. The aim of this review was to provide a general overview of the current state of technology used to assess pelvic floor functionality. It also provides literature research of the physiological and anatomical factors that correlate with pelvic floor health. This systematic review was conducted according to the PRISMA guidelines. The PubMed, ScienceDirect, Cochrane Library, and IEEE databases were searched for publications on sensor technology for the assessment of pelvic floor functionality. Anatomical and physiological parameters were identified through a manual search. In the systematic review, 114 publications were included. Twelve different sensor technologies were identified. Information on the obtained parameters, sensor position, test activities, and subject characteristics was prepared in tabular form from each publication. A total of 16 anatomical and physiological parameters influencing pelvic floor health were identified in 17 published studies and ranked for their statistical significance. Taken together, this review could serve as a basis for the development of novel sensors which could allow for quantifiable prevention and diagnosis, as well as particularized documentation of rehabilitation processes related to pelvic floor dysfunctions.