The restoration of endodontically treated teeth (ETT) remains a significant challenge in modern dentistry. These teeth often suffer from substantial structural damage due to both the original pathology and the invasive nature of endodontic procedures. Consequently, ETT are more susceptible to fractures compared to vital teeth, necessitating restorative strategies that can effectively restore both function and aesthetics while minimizing the risk of failure. In recent years, advances in adhesive dentistry and the development of high-strength ceramics have further expanded the restorative options for ETT. Bonded restorations have gained popularity as they preserve more tooth structure and enhance the overall strenght of the tooth-restoration complex. The choice of restorative material and technique is influenced by numerous factors, including the amount of remaining tooth structure, the functional requirements of the tooth, and the aesthetic demands of the patient. Despite the plethora of available materials and techniques, the optimal approach to restoring ETT remains a topic of ongoing research and debate. In this comprehensive review, the current state of and recent advances in restoring damaged endodontically treated teeth are explored. Numerous therapeutic options exist, involving a wide range of materials. This article aims to present the biomaterial advancements of the past decade and their applications, offering alternative approaches to treating damaged ETT with the goal of prolonging their retention on the dental arch and serving as a valuable resource for dental practitioners who face this issue daily.

Laser, an acronym for Light Amplification by Stimulated Emission of Radiation, is a powerful tool with diverse applications in modern dentistry. It emits monochromatic, coherent light resulting from photon-induced chain reactions. Available dental lasers include diode, argon, Er,Cr:YSGG, Er:YAG, Nd:YAG, and CO2. The unique property of these lasers, allowing them to be effectively used on both soft and hard tissues based on the operational parameters, positions them as particularly suited for a wide range of dental procedures. Compared to traditional methods, lasers offer advantages such as improved hemostasis and quicker wound healing. Such benefits stress the shift towards laser technology in dental treatment. In the realm of dental prosthodontics, which focuses on esthetics, functionality, and the physiological aspects of dental prostheses, lasers provide promising outcomes. Among the prosthetic options, fixed partial dentures stand out for their ability to mimic natural teeth, offering both esthetic and functional features, leading to satisfactory long-term outcomes if managed properly. This review paper delves into the specific application of laser technology in the context of prosthetic rehabilitation involving fixed partial dentures. By investigating intraoral laser procedures, it contributes to understanding laser\'s role in improving patients\' satisfaction and clinical efficiency in this field.

To review the developments in intraoral scanner (IOS) technologies applied in implant prosthodontics, emphasizing their influence on the accuracy of digital impressions, occlusal registrations, and the fit of implant-supported restorations.
A collection of published articles related to implant prosthodontics, the accuracy of digital impressions, occlusal registration, and the fit of implant-supported fixed restorations.
Three search engines were selected: Medline/PubMed, EBSCO, and Cochrane. A manual search was also conducted.
A literature search screened relevant databases and journals for studies on IOS applications in digital implant prosthodontic workflows from Dec 2018 to Dec 2023. Inclusion criteria encompassed randomized control trials, clinical trials, case series, and in vitro research focused on the use of IOS in digital implant prosthodontics.
The increased utilization of digital dental technologies has led to significant integration of digital implant prosthodontic workflows into clinicians\' clinical practice. Several variables affect the accuracy of digital impressions generated by IOS. Generally, the prevailing opinion in academic papers is that digital workflows are suitable for addressing short-span implant-supported restorations. However, when it comes to long-span defects, the accuracy of digital workflows is still a matter of debate. Digital bite registration is an integral part of the workflow. It depends mainly on the defect size and location, scan strategy, anatomical tooth variations, overbite and other factors. The overall fit of digitally prefabricated implant restorations comprises of proximal, occlusal contacts and how accurately the restoration connects with implants. Research methodologies need standardization for further validation.
In clinical practice, it is essential to have a thorough and up-to-date comprehension of various factors that can affect the accuracy of digital impressions and the fit of the final prosthesis in implant prosthodontics.

Vertical dimension (VD) is a critical factor in prosthodontics, playing a pivotal role in the functional and aesthetic outcomes of dental treatments. This literature review explores theoretical foundations and the various aspects of VD, including its definition, measurement, and clinical significance in prosthodontics. The relationship between VD and temporomandibular disorders (TMDs) is examined. Additionally, the impact of VD on facial proportions and aesthetics is significant, as it affects the lower third of the face and influences the patient\'s overall appearance and self-esteem. In conclusion, understanding the intricate relationship between VD, TMDs, facial aesthetics, and psychological well-being is essential for effective prosthodontic treatment. This comprehensive review provides valuable insights into the multifaceted role of VD in enhancing both functional and aesthetic outcomes, ultimately improving patient satisfaction and quality of life.

Prosthodontics is a dental subspecialty that includes the preparation of dental prosthetics for missing or damaged teeth. It increasingly uses computer-assisted technologies for planning and preparing dental prosthetics. This study aims to present the findings from a systematic review of publications on artificial intelligence (AI) in prosthodontics to identify current trends and future opportunities. The review question was \"What are the applications of AI in prosthodontics and how good is their performance in prosthodontics?\" Electronic searching in the Web of Science, ScienceDirect, PubMed, and Cochrane Library was conducted. The search was limited to full text from January 2012 to January 2024. Quadas-2 was used for assessing quality and potential risk of bias for the selected studies. A total of 1925 studies were identified in the initial search. After removing the duplicates and applying exclusion criteria, a total of 30 studies were selected for this review. Results of the Quadas-2 assessment of included studies found that a total of 18.3% of studies were identified as low risk of bias studies, whereas 52.6% and 28.9% of included studies were identified as studies with high and unclear risk of bias, respectively. Although they are still developing, AI models have already shown promise in the areas of dental charting, tooth shade selection, automated restoration design, mapping the preparation finishing line, manufacturing casting optimization, predicting facial changes in patients wearing removable prostheses, and designing removable partial dentures.

OBJECTIVE: The rise of stereolithographic surgical guides and digital workflow, combined with a better knowledge of materials and loading principle, has enabled the placement of the temporary prosthesis at the time of implant placement. This scoping review aimed to assess the current knowledge available on stackable guides.
METHODS: The review focused on fully edentulous or requiring total edentulism patients. The procedure studied was the use of stackable guides for edentulous patients in order to place immediate temporary prostheses. The clinical endpoint was immediate placement of the provisional prosthesis after surgery combined with a prior bone reduction using a stackable guide.
RESULTS: 12 case reports or case series articles met inclusion criteria, which did not allow an analysis by a systematic review. The included studies were case reports or case series. Most of the articles showed a base stabilized by 3 or 4 bone-pins, anchored in buccal or lingual part. Regarding the accuracy of bone reduction (ranged from 0.0248 mm to 1.98 mm) and implant placement when compared to planned, only 4 articles reported quantitative data. 11 articles showed an immediate loading with the transitional prosthesis after implant placement.
CONCLUSIONS: There are as yet no prospective or comparative studies on the efficiency of this technique. In a reliable way, stackable guides seem to be able to guide the practitioner from the flap elevation to the placement of the temporary screw-retained implant supported prosthesis. Given the lack of studies in this specific field of guided surgery, further studies are needed to confirm the clinical relevance of this technique.

The primary objective of this study is to conduct a comprehensive review of the existing literature that discusses research on post and core restorations, covering aspects such as their composition, manufacturing methods, and clinical effectiveness. The methodology employed in this review encompasses the implementation of a well-defined search strategy, the establishment of criteria for inclusion and exclusion, and the selection of relevant studies to summarize their findings. To gather relevant literature published between 1993 and 2023, the research team conducted separate searches on PubMed, Web of Science, and Embase databases. In total, 168 titles were initially retrieved from these electronic databases. By applying the predefined exclusion criteria, the researchers identified 73 articles that specifically address the conventional and computer-aided design/computer-aided manufacturing (CAD/CAM) technologies employed in post and core restorations. These treatments are commonly employed to restore teeth that have received endodontic therapy and subsequently experienced loss of dental structure. The development of computerized technology for the creation of customized posts and cores has emerged as a straightforward and efficient alternative to traditional methods. The review synthesizes papers discussing the techniques and materials involved in CAD/CAM-based construction of post and cores. It explores strategies for restoring endodontically treated teeth, highlighting both direct and indirect approaches. Commonly mentioned materials include zirconia, composite resin, and hybrid ceramics. Despite the limited literature on CAD/CAM post and core procedures, the review emphasizes the necessity of further research to assess long-term outcomes and efficacy. Additionally, it suggests including implications for future research and clinical recommendations to enhance the depth and practical relevance of the review.

The purpose of this systematic review and meta-analysis was to evaluate the accuracy (trueness and precision), marginal and internal adaptation, and margin quality of zirconia crowns made by additive manufacturing compared to subtractive manufacturing technology.
The investigation adhered to the PRISMA-ScR guidelines for systematic reviews and was registered at the Prospero database (n°CRD42023452927). Four electronic databases, including PubMed, Scopus, Embase, and Web of Science and manual search was conducted to find relevant studies published until September 2023. In vitro studies that assessed the trueness and precision, marginal and internal adaptation, and margin quality of printed crowns compared to milled ones were included. Studies on crowns over implants, pontics, temporary restorations, laminates, or exclusively experimental materials were excluded.
A total of 9 studies were included in the descriptive reporting and 7 for meta-analysis. The global meta-analysis of the trueness (P<0.74,I2=90 %) and the margin quality (P<0.61,I2=0 %) indicated no significant difference between the root mean square of printed and milled zirconia crowns. The subgroup analysis for the printing system showed a significant effect (P<0.01). The meta-analysis of the crown areas indicated no significant difference in most of the areas, except for the marginal (favoring milled crowns) and axial (favoring printed crowns) areas. For precision and adaptation, both methods showed a clinically acceptable level.
Additive manufacturing technology produces crowns with trueness and margin quality comparable to subtractive manufacturing. Both techniques have demonstrated the ability to produce crowns with precision levels, internal discrepancy, and marginal fit within clinically acceptable limits.
3D printing emerges as a promising and potentially applicable alternative method for manufacturing zirconia crowns, as it shows trueness and margin quality comparable to restorations produced by the subtractive method.

Despite the development of implant-supported prostheses, there are still patients for whom conservative treatments such as resin-bonded fixed dental prostheses (RBFDPs) are more appropriate. This study\'s objective was to analyze the available research on full-ceramic RBFDPs. In this study, Web of Science, MEDLINE/PubMed, Scopus, Embase, Cochrane Library, and Google Scholar databases were searched for articles published in English between 2010 and 2020. A total of 14 studies were reviewed based on the eligibility criteria. The results showed that using a cantilever design with one abutment had an advantage over two abutments. Additionally, it was proposed that preparations designed with retentive aids, such as a proximal box, groove, and pinhole, could improve RBFDP survival rates. IPS e.max ZirCAD, In-Ceram alumina, and zirconia CAD/CAM were the most commonly used framework materials. Most studies used air abrasion, salinization, or hydrofluoric acid for surface treatment. Adhesive resin cements were the most frequently used type of cement. The survival rate of In-Ceram ceramics (85.3%-94.8%) was lower than that of In-Ceram zirconia and IPS e.max ZirCAD. Debonding, followed by framework fracture, was the leading cause of failure. Following 3-10 years follow-up, the survival percentage of all-ceramic RBFDPs ranged from 76% to 100%. Although RBFDPs have demonstrated satisfactory success as a conservative treatment, long-term follow-ups and higher sample sizes in clinical research are required to gain more reliable outcomes on the clinical success rate of various RBFDP designs.

Chitosan, a versatile biopolymer, has gained recognition in the discipline of dental implantology due to possessing salient properties. This comprehensive review explores the potential of chitosan in dental implants, focusing on its biocompatibility, bioactivity, and the various chitosan-based materials that have been utilized for dental implant therapy. The review also highlights the importance of surface treatment in dental implants to enhance osseointegration and inhibit bacterial biofilm formation. Additionally, the chemical structure, properties, and sources of chitosan are described, along with its different structural forms. The characteristics of chitosan particularly color, molecular weight, viscosity, and degree of deacetylation are discussed about their influence on its applications. This review provides valuable insights into the promising utilization of polymeric chitosan in enhancing the success and functionality of dental implants. This study highlights the potential applications of chitosan in oral implantology. Chitosan possesses various advantageous properties, including muco-adhesiveness, hemostatic action, biocompatibility, biodegradability, bioactivity, and antibacterial and antifungal activities, which enhance its uses in dental implantology. However, it has limited aqueous solubility at the physiological pH, which sometimes restricts its biological application, but this problem can be overcome by using modified chitosan or chitosan derivatives, which have also shown encouraging results. Recent research suggests that chitosan may act as a promising material for coating titanium-based implants, improving osteointegration together with antibacterial properties.