BACKGROUND The Lisfranc ligament is crucial for maintaining the transverse and longitudinal arch of the foot. Owing to the disruption between the medial cuneiform bone and the base of the second metatarsal bone, the currently preferred fixation method remains controversial. Our fixation technique involves screwing one anchor to the medial and intermediate cuneiform bones and using the anchor to carry the ligament to bind the Lisfranc joint and first and second metatarsal joints altogether for elastic fixation. This study evaluated the clinical and functional outcomes of InternalBrace fixation for Lisfranc injury. MATERIAL AND METHODS This retrospective study included 58 patients who underwent InternalBrace fixation for Lisfranc injury between January 2019 and September 2022 by an experienced surgeon. One-way analysis of variance or t test was used. Preoperative classification was performed according to the Myerson classification with imaging data. Postoperative follow-up was performed based on intraoperative blood loss, fracture healing time, visual analog scale (VAS) score, the American Orthopedic Foot and Ankle Society (AOFAS) score, Tegner score, and complications. RESULTS Surgery was completed in all patients, and follow-up was performed. The patients\' ages ranged from 19 to 62 years (average: 34.6±9.4 years). The postoperative follow-up time was 12-24 months (average: 16.9±3.0 months). The average time for fracture healing was 12.8±3.0 (10-24) weeks. The VAS, AOFAS, and Tegner scores significantly improved postoperatively (from 5.33±1.0 (3-7) to 1.24±0.57 (0-2); 28.02±6.70 (18-51) to 91.59±4.76 (82-96); and 2.40±0.67 (1-4) to 6.53±0.54 (6-7), respectively), which was statistically significant (P<0.01), and the good rate of AOFAS was 91.4%. The postoperative complications were traumatic arthritis, incision infection, and temporary dorsal foot numbness, which gradually recovered. No other rejection reactions or Lisfranc fracture/dislocations recurrence occurred during the follow-up period. CONCLUSIONS InternalBrace fixation for Lisfranc injury is beneficial for restoring Lisfranc joint stability and function and allows for early and more aggressive rehabilitation for patients, with fewer surgical complications.

UNASSIGNED: To investigate the morphological characteristics of the glenohumeral joint (including the glenoid and coracoid) in the Chinese population and determine the feasibility of designing coracoid osteotomy based on the preoperative glenoid defect arc length by constructing glenoid defect models and simulating suture button fixation Latarjet procedure.
UNASSIGNED: Twelve shoulder joint specimens from 6 adult cadavers donated voluntarily were harvested. First, whether the coracoacromial ligament and conjoint tendon connected was anatomically observed and their intersection point was identified. The vertical distance from the intersection point to the coracoid, the maximum allowable osteotomy length starting from the intersection point, and the maximum osteotomy angle were measured. Next, the anteroinferior glenoid defect models of different degrees were randomly constructed. The arc length and area of the glenoid defect were measured. Based on the arc length of the glenoid defect of the model, the size of coracoid oblique osteotomy was designed and the actual length and angle of the coracoid osteotomy were measured. A limited osteotomy suture button fixation Latarjet procedure with the coracoacromial ligament and pectoralis minor preservation was performed and the position of coracoid block was observed.
UNASSIGNED: All shoulder joint specimens exhibited crossing fibers between the coracoacromial ligament and the conjoint tendon. The vertical distance from the tip of the coracoid to the coracoid return point was 24.8-32.2 mm (mean, 28.5 mm). The maximum allowable osteotomy length starting from the intersection point was 26.7-36.9 mm (mean, 32.0 mm). The maximum osteotomy angle was 58.8°-71.9° (mean, 63.5°). Based on the anteroinferior glenoid defect model, the arc length of the glenoid defect was 22.6-29.4 mm (mean, 26.0 mm); the ratio of glenoid defect was 20.8%-26.2% (mean, 23.7%). Based on the coracoid block, the length of the coracoid osteotomy was 23.5-31.4 mm (mean, 26.4 mm); the osteotomy angle was 51.3°-69.2° (mean, 57.1°). There was no significant difference between the arc length of the glenoid defect and the length of the coracoid osteotomy ( P>0.05). After simulating the suture button fixation Latarjet procedure, the highest points of the coracoid block (suture loop fixation position) in all models located below the optimal center point, with the bone block concentrated in the anteroinferior glenoid defect position.
UNASSIGNED: The size of the coracoid is generally sufficient to meet the needs of repairing larger glenoid defects. The oblique osteotomy with preserving the coracoacromial ligament may potentially replace the traditional Latarjet osteotomy method.
UNASSIGNED: 探讨国人盂肱关节（包括关节盂、喙突）形态学特点；通过构造不同程度关节盂骨缺损模型并模拟弹性固定Latarjet手术，明确根据术前关节盂骨缺损弧长度设计喙突截骨的可行性。.
UNASSIGNED: 采用自愿捐赠的6具成年尸体12个肩关节标本，首先解剖观察喙肩韧带与联合腱是否相连，确定两者交叉点，测量喙突尖端距离喙突折返处的垂直长度、以交叉点为起点允许的最大截骨线长度以及最大截骨角度。然后，随机构建不同程度关节盂前下方骨缺损模型，测量关节盂骨缺损弧长度并计算缺损面积；根据模型中关节盂骨缺损弧长度设计喙突斜形截骨，测量实际喙突截骨长度及截骨角度；模拟保留喙肩韧带有限截骨弹性固定Latarjet手术，观察骨块中心位置。.
UNASSIGNED: 所有肩关节标本喙肩韧带与联合腱之间存在交叉纤维，喙突尖距离喙突折返处垂直长度为24.8～32.2 mm，平均28.5 mm；以交叉点为起点允许的最长截骨线长度为26.7～36.9 mm，平均32.0 mm；最大截骨角度为58.8°～71.9°，平均63.5°。基于关节盂前下方骨缺损模型，测量关节盂骨缺损弧长度为22.6～29.4 mm，平均26.0 mm；关节盂骨缺损比例为20.8%～26.2%，平均23.7%。基于喙突骨块，测量喙突截骨长度23.5～31.4 mm，平均26.4 mm；截骨角度51.3°～69.2°，平均57.1°。关节盂骨缺损弧长度与喙突截骨长度比较，差异无统计学意义（ P>0.05）。模拟弹性固定Latarjet手术后，所有模型中喙突截骨骨块最高点（线袢固定位置）均位于最适圆心下方，骨块集中于关节盂前下方。.
UNASSIGNED: 喙突大小基本能满足较大关节盂骨缺损修复需求，保留喙肩韧带的斜形截骨方式有望替代传统Latarjet截骨方式。.

Scapholunate interosseous ligament injuries are a major cause of wrist instability and can be difficult to diagnose radiographically. To improve early diagnosis of scapholunate ligament injuries, we compared injury detection between bilateral routine clinical radiographs, static CT, and dynamic four-dimensional CT (4DCT) during wrist flexion-extension and radioulnar deviation. Participants with unilateral scapholunate ligament injuries were recruited to a prospective clinical trial investigating the diagnostic utility of 4DCT imaging for ligamentous wrist injury. Twenty-one participants underwent arthroscopic surgery to confirm scapholunate ligament injury. Arthrokinematics, defined as distributions of interosseous proximities across radioscaphoid and scapholunate articular surfaces at different positions within the motion cycle, were used as CT-derived biomarkers. Preoperative radiographs, static CT, and extrema of 4DCT were compared between uninjured and injured wrists using Wilcoxon signed rank or Kolmogorov-Smirnov tests. Median interosseous proximities at the scapholunate interval were significantly greater in the injured versus the uninjured wrists at static-neutral and maximum flexion, extension, radial deviation, and ulnar deviation. Mean cumulative distribution functions at the radioscaphoid joint were not significantly different between wrists but were significantly shifted at the scapholunate interval towards increased interosseous proximities in injured versus uninjured wrists in all positions. Median and cumulative distribution scapholunate proximities from static-neutral and 4DCT-derived extrema reflect injury status.

BACKGROUND: The scapholunate ligament is the most important stabilizer of the scapholunate articulation. The management of chronic irreversible injuries of this ligament in the absence of preexisting arthritis of the wrist joint remains controversial. Recently, surgeons introduced a novel surgical technique using an internal brace (IB). Several biomechanical studies on this technique have been conducted using cadavers; however, very few studies have discussed the results in detail in actual clinical practice. Therefore, herein, we investigated the radiological and functional results of patients who underwent IB augmentation as a treatment for chronic scapholunate dissociation.
METHODS: This retrospective study was conducted from April 2018 to May 2022. Twenty-two patients with chronic scapholunate dissociation were treated using the IB augmentation technique, of whom 17 were followed-up for at least 1 year. Radiological results, including scapholunate distance, scapholunate angle, and radioscaphoid angle, were collected. Furthermore, clinical parameters, such as the visual analog scale (preoperative and at final follow-up), the Disabilities of the Arm, Shoulder, and Hand scores (preoperatively and at 3, 6, and 12 months postoperatively), and Mayo wrist scores (preoperative and at final follow-up), were measured.
RESULTS: The scapholunate distance increased significantly in the affected wrist compared to the unaffected wrist, which improved after reconstruction in all wrist positions ( P < 0.05). Compared to the unaffected wrist, the scapholunate angle increased significantly in all positions ( P < 0.05) except for extension ( P = 0.535) and improved after reconstruction in all wrist positions. The radioscaphoid angle significantly increased compared to the angle of the unaffected wrist in all positions ( P < 0.05) except for extension ( P = 0.602) and clenched fist ( P = 0.556). This angle improved after reconstruction in all wrist positions except for extension ( P = 0.900). The visual analog scale score (7-2, preoperatively and at final follow-up) and Mayo wrist score (53-82, preoperatively and at final follow-up) improved after surgery. The Disabilities of the Arm, Shoulder, and Hand scores also improved after surgery (68, 53, 30, 7, preoperatively and at 3, 6, and 12 months postoperatively).
CONCLUSIONS: This study revealed that scapholunate ligament reconstruction using an autologous tendon and suture tape is a good reconstruction technique that can improve clinical symptoms and radiographic parameters with a shorter operation time and fewer complications than other reconstruction methods.

BACKGROUND: The aim of the study was to validate a software-based planning method for the Schoettle Point and to evaluate precision and time efficiency of its live overlay on the intraoperative X-ray.
METHODS: A software-based method was compared with surgeons\' manual planning in an inter- and intrarater study. Subsequently, K-wire placement was performed with and without an overlay of the planning. The time used and the precision achieved were statistically compared.
RESULTS: The average deviation between the surgeons (1.68 mm; 2.26 mm) was greater than the discrepancy between the surgeons and the software-based planning (1.30 mm; 1.38 mm). In the intrarater comparison, software-based planning provided consistent results. Live overlay showed a significantly lower positioning error (0.9 ± 0.5 mm) compared with that without overlay (3.0 ± 1.4 mm, p = 0.000; 3.1 ± 1.4 mm, p = 0.001). Live overlay did not achieve a significant time gain (p = 0.393; p = 0.678).
CONCLUSIONS: The software-based planning and live overlay of the Schoettle Point improves surgical precision without negatively affecting time efficiency.

OBJECTIVE: There is consensus in favor of a description of the dorsal ligaments of the carpus as not including a direct ligament between the lunate and capitate. On the other hand, there is an anatomical formation which, according to the currently accepted description, corresponds to the dorsal midcarpal capsule, itself thickened by the dorsal intercarpal ligament. The question is whether the capsule at this point deserves to be called an individualizable ligament. In our operative experience of the dorsal carpus, we have encountered a stout structure adherent to the lunate and capitate. In this article, we present the anatomic evidence of this structure\'s existence.
METHODS: Seven adult fresh frozen upper extremities were dissected. Three wrists were longitudinally sectioned in line with the middle finger metacarpal. The remaining 4 were dissected dorsally. Two representative samples of the stout structure connecting the lunate to the capitate were sent to pathology for histologic analysis and staining.
RESULTS: In all 3 of the longitudinally sectioned wrists, a thick band of tissue could clearly be seen, originating on the lunate, spanning the dorsal interval between the lunate and the capitate, and inserting on the capitate. With this structure intact, dorsal dislocation of the capitate was not possible, but preliminary sectioning of the structure allowed dislocation. In the 4 dorsally dissected wrists, the same connection was observed, palmar to the dorsal intercarpal ligament, in every specimen. The average dimensions of the dorsal capitolunate were: 15.25 ± 1 mm long, 8.75 ± 1 mm wide at the midpoint, and 1.75 ± 1 mm thick. The two specimens sent to pathology after sectioning showed longitudinally oriented collagen fibers. This structure also stained positive for elastin and contained intrasubstance vascular structures.
CONCLUSIONS: There is a stout ligamentous structure connecting the lunate to the capitate, palmar to the dorsal intercarpal ligament. Disruption of this structure appears to be necessary for dorsal dislocation of the capitate. Clinical studies are needed to gain better understanding of the exact function and importance of this structure.

To investigate the influence of sacroiliac interosseous ligament tension and laxity on the biomechanics of the lumbar spine.
A static analysis of a three-dimensional finite element model of the Lumbar-Pelvic is conducted to verify the model\'s effectiveness. Adjusting the sacroiliac ligament\'s elasticity modulus under a 10Nm lumbar flexion/extension moment, it simulates ligament tension/laxity to calculate vertebrae displacements, intervertebral disc stress and deformation, nucleus pulposus pressure, facet joint force, and ligament stress.
With the elastic modulus of the sacroiliac ligament changing by +50%, -50%, and -90%, the angular displacement of vertebra 3 in forward flexion changes by +1.64%, -4.84%, and -42.3%, and the line displacements change by +5.7%, -16.4%, and -144.9%, respectively; and the angular displacements in backward extension change by +0.2%, -0.6%, -5.9% and the line displacements change by +5.5%, -14.3%, and -125.8%. However, the angular displacement and center distance between adjacent vertebrae do not change, leading to no change in the maximum stress of the intervertebral disc and the maximum pressure in the nucleus pulposus. Flexion and extension directly affect the deformation and stress magnitude and distribution in the lumbar spine.
While sacroiliac interosseous ligament laxity and tension have little effect on disc deformation and stress, and nucleus pulposus pressure, they reduce the stability of the lumbar-sacral vertebrae. In a forward flexion state, the lumbar ligaments bear a large load and are prone to laxity, thereby increasing the risk of lumbar injury.

OBJECTIVE: To study the morphology and the morphometry of the oblique popliteal ligament (OPL).
METHODS: Thirty cadaver knees were dissected to study the morphology and morphometry of the OPL. For the measurement of the morphology of the OPL a standard tape and the vernier callipers were used.
RESULTS: Out of 30 specimens 14 were Y shaped, 10 were band shaped, and 6 were Z shaped observed. Total length was measured on both the limbs, on the right side it was 4.5 ± 0.4 cm and on the left side 4.5 ± 0.5 cm was recorded. Width at the medial attachment was also measured on both the limbs, on the right side it was 4.6 ± 0.5 cm and on the left side 4.7 ± 0.5 cm was recorded. And width at the lateral attachment was recorded too, on the right side it was 4 ± 0.3 cm and on the left side it was 4 ± 0.3 cm. Width at the midpoint was recorded as on the right side 3.5 ± 0.2 cm and on the left side 3.5 ± 0.2 cm.
CONCLUSIONS: The OPL is a thick ligament that arises as an extension of the semimembranosus, and it exists in various morphology which includes band, Y, Z, complex shapes.

OBJECTIVE: This study aimed to investigate the geometrical and mechanical properties of human thoracic spine ligaments subjected to uniaxial quasi-static tensile test.
METHODS: Four human thoracic spines, obtained through a body donation program, were utilized for the study. The anterior longitudinal ligament (ALL), posterior longitudinal ligament (PLL), capsular ligament (CL), ligamenta flava (LF), and the interspinous ligament and supraspinous ligament complex (ISL + SSL), were investigated. The samples underwent specimen preparation, including dissection, cleaning, and reinforcement, before being immersed in epoxy resin. Uniaxial tensile tests were performed using a custom-designed mechanical testing machine equipped with an environmental chamber (T = 36.6 °C; humidity 95%). Then, the obtained tensile curves were averaged preserving the characteristic regions of typical ligaments response.
RESULTS: Geometrical and mechanical properties, such as initial length and width, failure load, and failure elongation, were measured. Analysis of variance (ANOVA) revealed significant differences among the ligaments for all investigated parameters. Pairwise comparisons using Tukey\'s post-hoc test indicated differences in initial length and width. ALL and PLL exhibited higher failure forces compared to CL and LF. ALL and ISL + SSL demonstrated biggest failure elongation. Comparisons with other studies showed variations in initial length, failure force, and failure elongation across different ligaments. The subsystem (Th1 - Th6 and Th7 - Th12) analysis revealed increases in initial length, width, failure force, and elongation for certain ligaments.
CONCLUSIONS: Variations of both the geometric and mechanical properties of the ligaments were noticed, highlighting their unique characteristics and response to tensile force. Presented results extend very limited experimental data base of thoracic spine ligaments existing in the literature. The obtained geometrical and mechanical properties can help in the development of more precise human body models (HBMs).

Ankle injuries account for 15% to 25% of all sports injuries resulting in significant pain and loss of function. The purpose of this cross-sectional study was to validate a scale to help surgeons quantify the psychological readiness to Return To Sport (RTS) in patients undergoing ankle fracture surgery. ALR-RSI was used to assess the psychological readiness for RTS in athletic patients who underwent ankle fracture fixation between January 2020 and January 2021. Participants filled out ALR-RSI and 2 Patient-Related Outcome Measurement (PROM) tools: Olerud-Molander Ankle Score (OMAS) and Self-Reported Foot and Ankle Score (SEFAS). A total of 93 patients were included. There was a strong correlation between ALR-RSI and both OMAS and SEFAS, with Pearson coefficients of r = 0.58 and 0.53, respectively. ALR-RSI was significantly higher in the RTS group than in those who no longer practiced their main preinjury sport. Moreover, the discriminant validity of ALR-RSI (AUC = 0.81) was better than that of the SEFAS and OMAS (AUC = 0.64 and 0.65, respectively, p = .001). The intra-class correlation coefficient ρ of 0.94 showed excellent reproducibility. At an optimal cutoff value of 76.7, ALR-RSI had a sensitivity of 81% and a specificity of 75% with a Youden index of 0.56. In conclusion, ALR-RSI was a valid and reproducible tool to evaluate the psychological readiness for RTS in an active population after an ankle fracture. This score could help surgeons identify athletes who may have unfavorable postoperative outcomes and provide support on the ability to RTS.