OBJECTIVE: To investigate the prevalence of incidental findings and need for further dental treatment and analyse the influence of size of field-of-view (FOV) and age in cone beam computed tomography (CBCT) for pre-implant planning.
METHODS: 404 CBCT scans were examined retrospectively for incidental findings and need for further dental treatment. Incidental finding-frequencies and need for further treatment were assessed for different age (< 40 years, 40-60 years, > 60 years) and FOV groups (small, medium, large). Intraexaminer and interexaminer agreements were evaluated.
RESULTS: In 82% of the scans at least one incidental finding was found, with a total of 766 overall. More incidental findings were found in scans with large FOV (98% vs. 72%, OR = 22.39 large vs. small FOV, p < 0.0001) and in scans of patients > 60 years (OR = 5.37 patient\'s age > 60 years vs. < 40 years, p = 0.0003). Further dental treatment due to incidental findings was needed in 31%. Scans with large FOV were more likely to entail further treatment (OR = 3.55 large vs. small FOV, p < 0.0001). Partial edentulism and large FOV were identified as risk factors for further treatment (p = 0.0003 and p < 0.0001). Further referral of the patient based on incidental findings was judged as indicated in 5%. Intra- and inter-examiner agreements were excellent (kappa = 0.944/0.805).
CONCLUSIONS: A considerable number of incidental findings with need for further dental treatment was found in partially edentulous patients and in patients > 60 years. In pre-implant planning of elderly patients, the selection of large FOV CBCT scans, including dentoalveolar regions not X-rayed recently, help to detect therapeutically relevant incidental findings.

BACKGROUND: This study aimed to evaluate the influence of field of view (FOV) and voxel size on the accuracy of dynamic navigation (DN)-assisted endodontic microsurgery (EMS).
METHODS: Nine sets of maxillary and mandibular 3-dimensional-printed jaw models composed of 180 teeth were divided into 9 groups with different FOVs (80 × 80 mm, 60 × 60 mm, and 40 × 40 mm) and voxel sizes (0.3 mm, 0.16 mm, and 0.08 mm). The endodontic DN system was used to plan and execute the EMS. The accuracy of the DN-EMS was represented by the platform deviation, end deviation, angular deviation, resection angle, and resection length deviation. Statistical analyses were performed using SPSS 24.0, and the significance level was set at P < .05.
RESULTS: The average platform deviation, end deviation, angular deviation, resection angle, and resection length deviation were 0.69 ± 0.31 mm, 0.93 ± 0.44 mm, 3.47 ± 1.80°, 2.35 ± 1.76°, and 0.41 ± 0.29 mm, respectively. No statistically significant differences in accuracy were observed between the nine FOV and voxel size groups.
CONCLUSIONS: FOV and voxel size did not appear to play an important role in the accuracy of DN-EMS. Considering the image quality and radiation dose, it is reasonable to select a limited FOV (such as 40 × 40 mm and 60 × 60 mm) to cover only the registration device, involved teeth, and periapical lesion. The voxel size should be selected according to the required resolution and cone-beam computed tomography units.

The purpose of this study was to evaluate the effect of outside-field-of-view (FOV) lead shielding on the entrance surface dose (ESD) of the breast on an anthropomorphic X-ray phantom for a variety of axial skeleton X-ray examinations.
Using an anthropomorphic phantom and radiation dosimeter, the ESD of the breast was measured with and without outside-FOV shielding in anterior-posterior (AP) abdomen, AP cervical spine, occipitomental 30° (OM30) facial bones, AP lumbar spine, and lateral lumbar spine radiography. The effect of several exposure parameters, including a low milliampere-seconds technique, grid use, automatic exposure control use, wraparound lead (WAL) use, trolley use, and X-ray table use, on the ESD of the breast with and without outside-FOV shielding was investigated. The mean ESD (μSv) and standard deviation for each radiographic protocol were calculated. A one-tailed Student\'s t-test was carried out to evaluate whether ESD to the breast was reduced with the use of outside-FOV shielding.
A total of 920 breast ESD measurements were recorded across the different protocol parameters. The largest decrease in mean ESD of the breast with outside-FOV shielding was 0.002 μSv (P = 0.084), recorded in the AP abdomen on the table with a grid, OM30 on the table with a grid, OM30 standard protocol on the trolley, and OM30 on the trolley with WAL protocols. This decrease was found to be statistically non-significant.
This study found no significant decrease in the ESD of the breast with the use of outside-FOV shielding for the AP abdomen, AP cervical spine, OM30 facial bones, AP lumbar spine, or lateral lumbar spine radiography across a range of protocols.

BACKGROUND: Recently, technology that provides virtual reality (VR) content based on streaming services has been rapidly developed. However, there have been few studies to reduce VR sickness that occurs while the user watches VR content while wearing a head-mounted display (HMD) in real time.
OBJECTIVE: Based on this background, we propose a new approach to measure and reduce VR sickness that occurs while the user watches VR content while wearing an HMD in real time.
METHODS: The proposed approach is to apply VR sickness reduction methods in accordance with the user\'s real-time VR sickness level. Three methods that are known to be effective in reducing VR sickness and a single type of VR content were used to examine the effectiveness of the proposed approach, which was confirmed by the experimental results.
RESULTS: Our results show that VR sickness significantly decreased when a new approach was applied to VR content (in all cases, P<.05).
CONCLUSIONS: From our results, it was confirmed that VR sickness could be measured without wearing additional equipment, and its reduction method could be applied in real time in accordance with the user\'s condition by the proposed approach in this paper.

The purpose of this study was to evaluate the effect of single-energy metal artifact reduction (SEMAR) for metal artifacts using CT images reconstructed with adaptive iterative dose reduction three dimensional (AIDR3D) and advanced intelligent clear-IQ engine (AiCE) in calibration-field of view of various sizes. A prosthetic hip joint was arranged at the center of the phantom. The phantom images were scanned by changing calibration-field of view of 320 mm and 500 mm, and were reconstructed using filtered back-projection (FBP), AIDR3D, and AiCE with and without SEMAR, respectively. The metal artifact reduction with SEMAR was evaluated by calculated the relative artifact index value and visual scores in degree of artifact by seven radiology technologists. Relative artifact index of FBP, AIDR3D, and AiCE with 320 mm/500 mm calibration-field of views were 10.2/10.0, 16.3/16.4, and 17.8/17.9 without SEMAR, 3.3/3.1, 2.6/2.5, and 2.3/2.0 with SEMAR, respectively. Visual scores were not significantly different between 320 and 500 mm calibration-field of views in all reconstruction methods. The effect of metal artifact reduction was not affected by calibration-field of view sizes in the SEMAR combined with AIDR3D or AiCE.

The aim of this study was to assess the accuracy of 3D rendering of the mandibular condylar region obtained from different semi-automatic segmentation methodology. A total of 10 Cone beam computed tomography (CBCT) were selected to perform semi-automatic segmentation of the condyles by using three free-source software (Invesalius, version 3.0.0, Centro de Tecnologia da Informação Renato Archer, Campinas, SP, Brazil; ITK-Snap, version2.2.0; Slicer 3D, version 4.10.2) and one commercially available software Dolphin 3D (Dolphin Imaging, version 11.0, Chatsworth, CA, USA). The same models were also manually segmented (Mimics, version 17.01, Materialise, Leuven, Belgium) and set as ground truth. The accuracy of semi-automatic segmentation was evaluated by (1) comparing the volume of each semi-automatic 3D rendered condylar model with that obtained with manual segmentation, (2) deviation analysis of each 3D rendered mandibular models with those obtained from manual segmentation. No significant differences were found in the volumetric dimensions of the condylar models among the tested software (p > 0.05). However, the color-coded map showed underestimation of the condylar models obtained with ITK-Snap and Slicer 3D, and overestimation with Dolphin 3D and Invesalius. Excellent reliability was found for both intra-observer and inter-observer readings. Despite the excellent reliability, the present findings suggest that data of condylar morphology obtained with semi-automatic segmentation should be taken with caution when an accurate definition of condylar boundaries is required.

Purpose: To evaluate the initial experience of four experienced vitreoretinal surgeons, in France, with a three-dimensional (3-D) system, and to explore the potential advantages and disadvantages of this technology. We also report anatomical surgical outcomes of full-thickness idiopathic macular holes (MH) and primary rhegmatogenous retinal detachment (RRD), by using traditional microscopy and heads-up method. Methods: Four French retinal surgeons performed several types of ophthalmic surgeries with this new technology. To compare the 3-D system with ocular viewing, ergonomics, educational value, image sharpness, depth perception, field of view, technical feasibility, advantages and disadvantages, and expectations for the future, were assessed using a questionnaire. We also compared the same questionnaire with the answers of six Brazilian experienced vitreoretinal surgeons. For treating MHs, the surgeons performed 88 surgeries (44 with microscopy and 44 with 3-D). They performed 100 PPV for treating primary RRD (50 with ocular viewing and 50 with 3-D). The visualization method for each patient, as well as the assignment of each surgeon for a specific patient, were all randomly selected. Results: On the questionnaire, 3-D was preferred to traditional microscopy, except for technical feasibility; the type of surgery benefitting most from the 3-D was macula surgery and the least was anterior segment surgery; the most used by all is the black and white filter in patients with atrophic RPE during ILM peeling. Eighty-one (92.1%) MHs was successfully closed with one surgery and out of the 100 eyes with a primary RRD, the anatomical success after 3 months of follow-up was 91%, with no statistical significance between 3-D and ocular viewing. Conclusions: The surgeons in this study preferred 3-D to ocular viewing. Vitrectomy surgery to treat MHs and RRDs can be performed using the 3-D with the same efficiency as microscopy. Digital integration of 3-D and iOCT can be useful in some cases. With continuous refinement to improve the ability to visualize inside of the eye, this promising technology may enhance what we do as surgeons.

暂无摘要。

OBJECTIVE: To evaluate the initial experiences of several vitreoretinal surgeons in Brazil, both experienced and beginners, with a three-dimensional (3D) system, and to report the advantages and disadvantages of this technology. We also report surgical manipulations performed using the heads-up method in porcine eyes. For full-thickness idiopathic macular holes (MHs), we analyzed the times required for pars plana vitrectomy (PPV) and internal limiting membrane (ILM) rhexis by using traditional microscopy and 3D system, and to evaluate anatomical surgical results.
METHODS: During experimental vitreoretinal surgery on porcine eyes, two retinal surgeons applied the heads-up method. In clinical surgery, 14 retinal surgeons performed almost all types of vitreoretinal surgeries in association with facectomy, Ahmed glaucoma valve implant, or minimally invasive glaucoma surgery using an iStent®. The Ngenuity® 3D Visualization System was digitally integrated with intraoperative optical coherence tomography, the Verion™ Image-Guided System, and an endoscope (with a modified GoPro® camera). To compare the 3D system with traditional microscopy, ergonomics, educational value, image sharpness, depth perception, field of view, advantages and disadvantages, and technical feasibility were assessed using a questionnaire. One year later, the 14 surgeons answered the same questionnaire again, in order to assess whether they became more comfortable or not with 3D. For treating MHs, four surgeons (surgeon 1, fellows 1, 2, 3) performed the total of 40 surgeries. Each one performed 10 surgeries (5 with traditional microscopy and 5 with 3D visualization). The completion time for PPV and ILM rhexis were determined by using both methods.
RESULTS: In porcine eyes, disabling the color channels allowed better visualization of the ILM, either with Brilliant Blue G (BBG), indocyanine green chorioangiography (ICG), or açai dye; transillumination through the sclera was also better without a color channel, but visualization of the peripheral vitreous was better with a blue channel. Regarding clinical experience, the questionnaire responses showed that the respondents generally favored the heads-up method compared with traditional microscopy (p < 0.05); however, despite a slightly higher average score, the 3D system was not statistically significantly preferred in terms of technical feasibility (p = 0.1814). Answering again the same questionnaire 1 year later, the 14 surgeons felt more comfortable with 3D (p < 0.05). The type of surgery benefitting most from the 3D system was peeling of the ILM or epiretinal membrane (p < 0.001), and that receiving the least benefit was anterior segment surgery (p < 0.001). In addition, surgeons did not report benefits of color channels, preferring to disable it (p < 0.001). Comparisons between the average time for full PPV and ILM rhexis by using the two methods were non-significant, neither in each individual case of 3D surgery for each surgeon. Surgeon 1 had always been faster than his fellows. Thirty-six (90%) full-thickness MHs were successfully closed with one surgery.
CONCLUSIONS: The 3D system was preferred to traditional microscopy. The 3D system was especially helpful for certain specific types of surgeries and served as an educational tool, having reduced illumination and allowing precise focusing. Concerning MH surgery, heads-up method was similar to traditional microscopy regarding length of time and anatomical surgical results. As a digital platform, it will be amenable to constant upgrades and may ultimately become the new standard for ophthalmic surgery.

BACKGROUND: Lens probes used in arthroscopy typically have a small diameter and wide field-of-view. This introduces strong radial distortion (RD) into the image, ultimately affecting the surgeon\'s hand-eye coordination. This study evaluates potential benefits of using distortion-free images in arthroscopic surgery.
METHODS: Distortion-free images were obtained using RDFixer™ software (Perceive3D, SA) to remove RD in the input video stream. Twelve orthopedic residents performed an arthroscopic task (loose body removal) in a dry-knee model using video with and without distortion. Residents were questioned about image quality, and surgical performance was rated using an adapted Global Rating Scale.
RESULTS: A statistically significant improvement of all parameters was observed with distortion-free images. Residents perceived distortion-free images as providing a wider field-of-view and a better notion of relative depth and distance.
CONCLUSIONS: RD correction improved the surgical performance of residents, potentially decreasing their learning curve. Future work will study whether the benefits are observable in experienced surgeons. Copyright © 2014 John Wiley & Sons, Ltd.