Polymer modification has been established as a cost-effective, simple, in situ method for overcoming some of the inherent disadvantages of boron-doped diamond (BDD) electrodes, and its application has been extended to reliable, low-cost environmental monitoring solutions. The present review focuses on modifying BDD electrodes with semi-conductive polymers acting as redox mediators. This article reports on the development of a 3-methyl thiophene-modified boron-doped diamond (BDD/P3MT) sensor for the electrochemical determination of total phenolic compounds (TPCs) in tea samples, using gallic acid (GA) as a marker. GA is a significant polyphenol with various biological activities, making its quantification crucial. Thus, a simple, fast, and sensitive GA sensor was fabricated using the electroanalytical square wave voltammetry (SWV) technique. The sensor utilizes a semi-conductive polymer, 3-methyl thiophene, as a redox mediator to enhance BDD\'s sensitivity and selectivity. Electrochemical synthesis was used for polymer deposition, allowing for greater purity and avoiding solubility problems. The BDD/P3MT sensor exhibits good electrochemical properties, including rapid charge transfer and a large electrochemical area, enabling GA detection with a limit of detection of 11 mg/L. The sensor\'s response was correlated with TPCs measured by the Folin-Ciocalteu method. Square wave voltammetry (SWV) showed a good linear relationship between peak currents and GA concentrations in a wide linear range of 3-71 mg/L under optimal conditions. The BDD/P3MT sensor accurately measured TPCs in green tea, rooibos tea, and black tea samples, with green tea exhibiting the highest TPC levels. The results demonstrate the potential of the modified BDD electrode for the rapid and accurate detection of phenolic compounds in tea, with implications for quality control and antioxidant activity assessments. The prolific publications of the past decade have established BDD electrodes as robust BDD sensors for quantifying polyphenols. Fruits, vegetables, nuts, plant-derived beverages such as tea and wine, traditional Eastern remedies and various herbal nutritional supplements contain phenolic chemicals. The safety concerns of contaminated food intake are significant health concerns worldwide, as there exists a critical nexus between food safety, nutrition, and food security. It has been well established that green tea polyphenol consumption promotes positive health effects. Despite their potential benefits, consuming high amounts of these polyphenols has sparked debate due to concerns over potential negative consequences.

The quality of traditional Chinese medicine (TCM) is the premise to ensure its safety and effectiveness in clinical application. In this study, a complete quality control system for four-dimensional fingerprinting of TCM was innovatively constructed based on multiple detection techniques, and the quality of Shuanghuanglian oral liquid (SHL) was evaluated. Electrochemical fingerprinting (ECFP) as an emerging method without pretreatment provides rich and quantifiable information for SHL samples. The first quantitative ECFP of SHL was developed by the B-Z oscillation system. Eight characteristic parameters were analyzed and a good linear relationship was found between the oscillation lifetime and sample volume, by which the calculated values of the added sample volume (VL) showed different fluctuations between samples. What is more, high-performance liquid chromatography five-wavelength fusion fingerprint (HPLC-FWFP), GC fingerprint (GC-FP), and UV quantum fingerprint (UV-QFP) was established. Meanwhile, the purity of the peaks of the HPLC-FWFP was verified by the dual-wavelength absorption coefficient ratio spectrum (DWAR). Equal weighted ratio quantitative fingerprinting method (EWRQFM) was successfully proposed to extract all potential features for the overall quality assessment of the samples. Finally, a comprehensive evaluation strategy was proposed, namely the variation coefficient weighting algorithm (VCWA). The results of qualitative and quantitative evaluation of HPLC-FWFP, GC-FP, electrochemical quantum fingerprints (EC-QFP), and UV-QFP were integrated by this method. The established evaluation system is also a suitable strategy to control the quality of other TCM preparations.

Spinel ferrites are promising anode materials for lithium-ion batteries (LIBs) owing to their high theoretical specific capacities. However, their practical application is impeded by inherent low conductivity and severe volume expansion, which can be surpassed by increasing the surface-to-volume ratio of nanoparticles. Currently, most methods produce spinel ferrite nanoparticles with large size and severe aggregation, degrading their electrochemical performance. In this study, a low-temperature aminolytic route was designed to synthesize sub-10 nm CoFe2 O4 nanoparticles with good dispersion through carefully exploiting the reaction of acetates and oleylamine. The performance of CoFe2 O4 nanoparticles obtained by a traditional co-precipitation method was also investigated for comparison. This work demonstrates that CoFe2 O4 nanoparticles synthesized by the aminolytic route are promising as anode materials for LIBs. Besides, this method can be extended to design other spinel ferrites for energy storage devices with superior performance by simply changing the starting material, such as MnFe2 O4 , MgFe2 O4 , ZnFe2 O4 , and so on.

A family of inherently chiral electroactive selectors based on the 2,2\'-biindole atropisomeric scaffold, of easy synthesis and modulable functional properties, is studied in cascade in two enantioselection contexts. They are at first investigated as probes in enantioselective HPLC, studying molecular structure and temperature effects, and achieving very efficient semipreparative enantioseparation. The enantiomers thus obtained, of remarkable chiroptical features (optical rotation as well as circular dichroism), are successfully applied as selectors in chiral voltammetry in different media for discrimination of the enantiomers of chiral electroactive probes, either by conversion into enantiopure electroactive electrode surfaces by electrooligomerization on glassy carbon substrate (the two monomers with shorter alkyl chains), or as chiral additive in achiral ionic liquid (the monomer with longest alkyl chains). Discrimination is conveniently and reproducibly achieved in terms of significant potential differences for the two enantiomers, specularly inverting either probe or selector configuration. In one case successful discrimination is also observed with the two probe enantiomers concurrently present, either as racemate or with enantiomeric excesses, neatly accounted for by the peak current ratios.

Carvedilol (CRV) is a non-selective blocker of α and β adrenergic receptors, which has been extensively used for the treatment of hypertension and congestive heart failure. Owing to its poor biopharmaceutical properties, CRV has been incorporated into different types of drug delivery systems and this necessitates the importance of investigating their compatibility and stability. In this sense, we have investigated the applicability of several electroanalytical tools to assess CRV compatibility with lipid excipients. Voltammetric and electrochemical impedance spectroscopy techniques were used to evaluate the redox behavior of CRV and lipid excipients. Results showed that Plurol® isostearic, liquid excipient, and stearic acid presented the greatest anode peak potential variation, and these were considered suitable excipients for CRV formulation. CRV showed the highest stability at room temperature and at 50 °C when mixed with stearic acid (7% w/w). The results also provided evidence that electrochemical methods might be feasible to complement standard stability/compatibility studies related to redox reactions.

The ultimate goal in the understanding of complex chemical processes is a complete description of the underlying reaction mechanism. In the present study and for this purpose, a novel experimental platform is introduced that builds upon electrochemistry capable of generating reactive intermediate species at the electrode surface. The atmospherically relevant nitration of catechols is taken as a case example. First, we confirm the recently proposed nitration mechanism, advancing the understanding of atmospheric brown carbon formation in the dark. We are able to selectively quantify aromatic isomers, which is beyond the limits of conventional electroanalysis. Second, we identify a new pathway of nitrocatechol hydroxylation, which proceeds simply by oxidation and the addition of water. This pathway can be environmentally significant in the dark aqueous-phase formation of secondary organic aerosols. Third, the developed methodology is capable of selectively detecting a wide range of nitroaromatics; a possible application in environmental monitoring is proposed.

Conducting organic polymers (COPs) are made of a conjugated polymer backbone supporting a certain degree of oxidation. These positive charges are compensated by the doping anions that are introduced into the polymer synthesis along with their accompanying cations. In this work, the influence of these cations on the stoichiometry and physicochemical properties of the resulting COPs have been investigated, something that has previously been overlooked, but, as here proven, is highly relevant. As the doping anion, metallacarborane [Co(C2 B9 H11 )2 ]- was chosen, which acts as a thistle. This anion binds to the accompanying cation with a distinct strength. If the binding strength is weak, the doping anion is more prone to compensate the positive charge of the polymer, and the opposite is also true. Thus, the ability of the doping anion to compensate the positive charges of the polymer can be tuned, and this determines the stoichiometry of the polymer. As the polymer, PEDOT was studied, whereas Cs+ , Na+ , K+ , Li+ , and H+ as cations. Notably, with the [Co(C2 B9 H11 )2 ]- anions, these cations are grouped into two sets, Cs+ and H+ in one and Na+ , K+ , and Li+ in the second, according to the stoichiometry of the COPs: 2:1 EDOT/[Co(C2 B9 H11 )2 ]- for Cs+ and H+ , and 3:1 EDOT/[Co(C2 B9 H11 )2 ]- for Na+ , K+ , and Li+ . The distinct stoichiometries are manifested in the physicochemical properties of the COPs, namely in the electrochemical response, electronic conductivity, ionic conductivity, and capacitance.

Poor removal of many pharmaceuticals and personal care products in sewage treatment plants leads to their discharge into the receiving waters, where they may cause negative effects for aquatic environment and organisms. In this study, electrochemical removal process has been used as alternative method for removal of mefenamic acid (MEF). For our knowledge, removal of MEF using electrochemical process has not been reported yet. Effects of initial concentration of mefenamic acid, sodium chloride (NaCl), and applied voltage were evaluated for improvement of the efficiency of electrochemical treatment process and to understand how much electric energy was consumed in this process. Removal percentage (R%) was ranged between 44 and 97%, depending on the operating parameters except for 0.1 g NaCl which was 9.1%. Consumption energy was 0.224 Wh/mg after 50 min at 2 mg/L of mefenamic acid, 0.5 g NaCl, and 5 V. High consumption energy (0.433 Wh/mg) was observed using high applied voltage of 7 V. Investigation and elucidation of the transformation products were provided by Bruker software dataAnalysis using liquid chromatography-time of flight mass spectrometry. Seven chlorinated and two non-chlorinated transformation products were investigated after 20 min of electrochemical treatment. However, all transformation products (TPs) were eliminated after 140 min. For the assessment of the toxicity, it was impacted by the formation of transformation products especially between 20 and 60 min then the inhibition percentage of E. coli bacteria was decreased after 80 min to be the lowest value.

The realization of artificial photosynthesis may depend on the efficient integration of photoactive semiconductors and catalysts to promote photoelectrochemical water splitting. Many efforts are currently devoted to the processing of multicomponent anodes and cathodes in the search for appropriate synergy between light absorbers and active catalysts. No single material appears to combine both features. Many experimental parameters are key to achieve the needed synergy between both systems, without clear protocols for success. Herein, we show how computational chemistry can shed some light on this cumbersome problem. DFT calculations are useful to predict adequate energy-level alignment for thermodynamically favored hole transfer. As proof of concept, we experimentally confirmed the limited performance enhancement in hematite photoanodes decorated with cobalt hexacyanoferrate as a competent water-oxidation catalyst. Computational methods describe the misalignment of their energy levels, which is the origin of this mismatch. Photoelectrochemical studies indicate that the catalyst exclusively shifts the hematite surface state to lower potentials, which therefore reduces the onset for water oxidation. Although kinetics will still depend on interface architecture, our simple theoretical approach may identify and predict plausible semiconductor/catalyst combinations, which will speed up experimental work towards promising photoelectrocatalytic systems.

Microbial electrosynthesis is a highly promising application of microbial electrochemical technologies for the sustainable production of organic compounds. At the same time a multitude of questions need to be answered and challenges to be met. Central for its further development is using appropriate electroactive microorganisms and their efficient extracellular electron transfer (EET) as well as wiring of the metabolism to EET. Among others, Clostridia are believed to represent electroactive microbes being highly promising for microbial electrosynthesis. We investigated the potential steps and challenges for the bio-electrochemical fermentation (electro-fermentation) of mid-chain organic acids using Clostridium kluyveri. Starting from a metabolic model the potential limitations of the metabolism as well as beneficial scenarios for electrochemical stimulation were identified and experimentally investigated. C. kluyveri was shown to not be able to exchange electrons with an electrode directly. Therefore, exogenous mediators (2-hydroxy-1,4-naphthoquinone, potassium ferrocyanide, neutral red, methyl viologen, methylene blue, and the macrocyclic cobalt hexaamine [Co(trans-diammac)]3+) were tested for their toxicity and electro-fermentations were performed in 1L bioreactors covering 38 biotic and 8 abiotic runs. When using C. kluyveri and mediators, maximum absolute current densities higher than the abiotic controls were detected for all runs. At the same time, no significant impact on the cell metabolism (product formation, carbon recovery, growth rate) was found. From this observation, we deduce general potential limitations of electro-fermentations with C. kluyveri and discuss strategies to successfully overcome them.