The clinical demand for occlusal reconstruction increases rapidly with increasing number of patients who have lost their normal occlusion because of tooth wear and dentition defects. Occlusal reconstruction is a special type of restoration defined as a comprehensive restoration of the function of the stomatognathic system by reestablishing a uniform and stable occlusal relationship between the upper and lower dentitions. Occlusal function analysis is an important part of occlusal reconstruction to achieve accurate restoration design and adjustment. Digital occlusal function analysis was conducted to monitor the movement of the mandible and obtain related data for the parameter design of occlusal reconstruction. Preoperative design, intraoperative adjustment, and postoperative verification were achieved, thereby improving the efficiency and accuracy of occlusal reconstruction.
随着牙齿磨损、牙列缺损等导致正中 关系丧失的患者增多，咬合重建的临床需求也在增加。咬合重建是一种通过重新建立均匀稳定的上下牙列咬合关系以恢复口颌系统功能的一种特殊修复方式。如何进行咬合功能分析以实现精准的修复设计与调整是咬合重建中极其重要的一环。本文报告了1例利用数字化咬合功能分析获取咬合及下颌运动相关参数用于咬合重建修复体设计的病例，达到术前设计、术中调整、术后验证的目的，使得咬合重建进行得更加高效准确。.

BACKGROUND: This case report highlights the importance of standardized and fully digital sequential treatment in complex occlusal rehabilitation cases. To fully resolve the patient\'s dental needs, such cases often require multidisciplinary interventions including periodontal therapy, endodontic treatment, anterior esthetics, implant restoration, and prosthetic rehabilitation. A fully digital workflow (including facial scanners, intraoral scanners, jaw motion tracking systems, virtual articulators, and computer-aided design software) streamlined the complex treatment, enhancing workflow simplicity, efficiency, visibility, and precision.
METHODS: The patient presented with decreased chewing efficiency of the upper and lower prostheses, along with unsatisfactory esthetic appearance of the anterior teeth. After physical examination and radiological assessment, this complex occlusal rehabilitation case required periodontal therapy, anterior esthetic enhancement, implant restoration, and fixed prosthetic rehabilitation. Therefore, a fully digital workflow was adopted. Full-crown prostheses were placed on teeth 13, 23, and 34; a fixed bridge encompassed positions 32 to 42, and single implant crowns were placed on teeth 35 and 36. Implant-supported fixed bridges were constructed for teeth 12 to 22 and 44 to 46, anchored by implants at teeth 12, 22, 44, and 46. All definitive prostheses were fabricated from zirconia ceramics, chosen for their durability and esthetic characteristics. Finally, restorations with satisfactory esthetic and functional characteristics were seated, preserving the tooth and its supporting structures. During treatment and follow-up, the T-scan occlusal analysis system was utilized to continuously monitor and guide the adjustment of occlusal distribution across the patient\'s dental arches. After 18 months, the patient remains satisfied with the definitive restorations.
CONCLUSIONS: This report is intended to help dentists understand and implement standardized and fully digital workflows during the management of complex occlusal rehabilitation cases; it may also facilitate harmonious integration of esthetic and functional characteristics.

This case report explores how the presence of an adjacent implant influenced the restoration of a tooth with pulpitis in a gastro-esophageal reflux disease (GERD) patient. A patient with GERD requires a tooth-colored crown not only for aesthetics but also to address potential galvanic concerns arising from an adjacent implant. GERD, a condition causing non-cavity erosion, weakens tooth structure over time, presenting significant challenges in treatment. It resulted in bite relapse and insufficient occlusal clarity over time. A comprehensive treatment approach was needed to restore both function and appearance. This involved managing galvanism using non-metallic materials to ensure optimal occlusal clarity, as well as meticulously reinforcing and restoring tooth structure. Monoblock post-fused crowns were chosen for their superior durability, stability, and comfort. The ceramic layering not only effectively prevented galvanic issues by insulating the tooth structure but also significantly improved the natural appearance of teeth, thereby promoting long-term oral health and successfully managing complex dental concerns. The dental team successfully restored the damaged tooth by considering specific factors that influenced the treatment plan, including achieving optimal aesthetic outcomes.

OBJECTIVE: Occlusal sensitivity (OS)-the ability to detect fine objects between opposing teeth-mainly relies on the activity of mechanoreceptors located in the periodontal ligament. We tested whether somatosensory amplification (SSA)-the tendency to perceive normal somatic sensations as being intense, noxious, and disturbing, which plays a critical role in hypervigilance-affects OS.
METHODS: We measured OS in 66 adults divided into three groups based on their SSA scores (LowSSA, Intermediate - IntSSA, HighSSA) by asking them to bite on aluminum foils (8 to 72 μm thick) and a sham foil, and report whether they felt each foil. We performed 20 trials for each thickness and sham condition (each participant was tested 120 times), and compared the frequency of correct answers (%correct) among groups after adjusting for participants\' trait anxiety, depression, self-reported oral behaviors, and masseter cross-sectional area.
RESULTS: %correct was affected by the interaction Foil Thickness-by-SSA (p = 0.007). When tested with the 8 μm foil, the HighSSA group had a lower %correct than the IntSSA (contrast estimate [95% CI]: -14.2 [-25.8 - -2.6]; p = 0.012) and the LowSSA groups (-19.1 [-31.5 - -6.6]; p = 0.001). Similarly, with the 24 μm foil, the HighSSA group had a lower %correct compared to the IntSSA (-12.4 [-24.8-0.1]; p = 0.048) and the LowSSA groups (-10.8 [-22.5-0.8]; p = 0.073).
CONCLUSIONS: Individuals with high SSA present with an aberrant occlusal sensitivity.
CONCLUSIONS: Our findings provide novel insights into the relationship between occlusal perception and psychological factors, which may influence an individual\'s ability to adapt to dental work.

Mandibular fractures are very common in maxillofacial trauma surgery. While previous studies have focused on possible risk factors related to post-operative complications, none have tried to identify pre-existing conditions that may increase the risk of mandibular fractures. We hypothesized, through clinical observation, that anatomical conditions involving poor dental contacts, such as malocclusions, may increase the risk of mandibular fractures. This work was subdivided into two parts. In the first part, Digital Imaging and Communications in Medicine (DICOM) data of four healthy patients characterized by different dentoskeletal occlusions (class I, class II, class III, and anterior open bite) have been used to develop four finite element models (FEMs) that accurately reproduce human bone structure. A vertical and lateral impact have been simulated at increasing speed on each model, analyzing the force distribution within the mandibular bone. Both vertical and lateral impact showed higher level of stress at the impact point and in the condylar area in models characterized by malocclusion. Specifically, the class III and the open bite models, at the same speed of impact, had higher values for a longer period, reaching critical stress levels that are correlated with mandibular fracture, while normal occlusion seems to be a protective condition. In the second part of this study, the engineering results were validated through the comparison with a sample of patients previously treated for mandibular fracture. Data from 223 mandibular fractures, due to low-energy injuries, were retrospectively collected to evaluate a possible correlation between pre-existing malocclusion and fracture patterns, considering grade of displacement, numbers of foci, and associated CFI score. Patients were classified, according to their occlusion, into Class I, Class II, Class III, and anterior open bite or poor occlusal contact (POC). Class I patients showed lower frequencies of fracture than class II, III, and open bite or POC patients. Class I was associated with displaced fractures in 16.1% of cases, class II in 47.1%, class III in 48.8% and open bite/POC in 65.2% of cases (p-value < 0.0001). In class I patients we observed a single non-displaced fracture in 51.6% of cases, compared to 12.9% of Class II, 19.5% of Class III and 22.7% of the open bite/POC group. Our analysis shows that class I appears to better dissipate forces applied on the mandible in low-energy injuries. A higher number of dental contacts showed a lower rate of multifocal and displaced fractures, mitigating the effect of direct forces onto the bone. The correlation between clinical data and virtual simulation on FEM models seems to point out that virtual simulation successfully predicts fracture patterns and risk of association with different type of occlusion. Better knowledge of biomechanics and force dissipation on the human body may lead to the development of more effective safety devices, and help select patients to plan medical, orthodontic/dental, and/or surgical intervention to prevent injuries.

METHODS: This case report describes a procedure for assessing changes in occlusal relationships in patients with acquired open bites due to temporomandibular joint disease using an intraoral scanner (IOS). A digital impression was made using the IOS at the initial visit. Subsequent impressions were made every 6 months using the IOS and magnetic resonance imaging (MRI) or computed tomography (CT). Standard triangulated language (STL) image files of two digital impressions at different points in time were superimposed, including the occlusal relationship with reference to the maxillary dentition. Finally, three-dimensional (3D) changes in the occlusal relationship over time were evaluated.
CONCLUSIONS: In Case 1, the superimposed STL image indicated almost no evident deviation of the mandible. Therefore, an orthodontic treatment was initiated. In contrast, in cases 2 and 3, where changes in the occlusal relationship continued, secondary treatment was postponed and patients continued to be monitored periodically. In case 3, even though left condyle resorption was progressive, the degree of open bite on the right side improved after 6 months. However, the open bite continued to progress for another 6 months despite the stability of the condyle.
CONCLUSIONS: Changes in the condylar shape observed using imaging may not always reflect changes in the occlusal relationship. In addition to changes in the condyles and eminences of the temporomandibular joint (TMJ), changes in the occlusal relationships of patients with acquired open bite should be evaluated using an intraoral scanner.

The non-surgical treatment of adult concave deformity can be achieved by interdisciplinary solution, which includes condylar relocation, fixed orthodontic, and functional occlusion smile design anterior prosthesis. In this study, an adult patient with concave deformity were treated by maxillary occlusal splint, conventional fixed brackets, and upper anterior teeth porcelain veneers to lead mandibular condyle to centric relation, to correct the dental arches for functional occlusion, and to gain the final desired esthetic achievement after treatments.

UNASSIGNED: Obesity is a global public health challenge, closely related with the progression of other diseases. In recent years, odontology has intervened against obesity through the implementation of intraoral devices that contribute with weight control treatments.
UNASSIGNED: To study the use of a dental occlusal disruptor as a strategy to moderate caloric intake.
UNASSIGNED: Pilot study which included 2 patients. It was used a dental occlusal disruptor that has an impact on the smaller amount of food at each bite. Patients attended five appointments in which a stomatological evaluation was carried out and anthropometric measurements were taken. All adverse effects were reported in each patient\'s clinical history.
UNASSIGNED: Patients presented weight and body fat loss, increased muscle mass and decreased both body mass index and waist and hip measurements.
UNASSIGNED: The use of the disruptor does not alter the stomatological assessment, it promotes masticatory regulation and the decrease in body weight. It is necessary to analyze its use in a larger number of patients.
UNASSIGNED: la obesidad es un reto para la salud pública mundial y está relacionada con la aparición y progresión de diversas enfermedades. En los últimos años, la odontología ha intervenido en el combate a la obesidad mediante la implementación de aditamentos intraorales que coadyuvan en el tratamiento del control de peso.
UNASSIGNED: estudiar el uso de un disruptor oclusal dental como estrategia para moderar la ingesta calórica.
UNASSIGNED: estudio piloto que incluyó 2 pacientes. Se empleó un disruptor oclusal dental que incide en que la cantidad de alimento en cada bocado sea menor. Los pacientes acudieron a 5 citas para valoración estomatológica y toma de medidas antropométricas. Se reportaron todos los efectos adversos en la historia clínica de cada paciente.
UNASSIGNED: ambos pacientes presentaron pérdida de peso y de grasa corporal, aumento de masa muscular y disminución tanto del índice de masa corporal como de mediciones de cintura y cadera.
UNASSIGNED: el uso del disruptor no altera la valoración estomatológica, propicia la regulación masticatoria y promueve la disminución del peso corporal. Es necesario analizar su uso en mayor número de pacientes.

The purpose of this clinical report was to describe the use of a piezographic impression associated with computer-aided design and computer-aided manufacturing (CAD-CAM) for teeth setup and of digital tools for neuro-musculo-kinetic analyses. An edentulous patient with hemiglossectomy and heavily resorbed mandible consulted for complete denture rehabilitation to improve their masticatory function and speech. Master casts, wax rims, and piezographic impression were scanned for digital prosthetic work. Two digital try-ins were performed to respect the neutral zone: try-in 1 with posterior crossbite and try-in 2 without crossbite. Muscle activity and mandibular kinetics were performed for each try-in following the MAC2 protocol (six criteria): muscular tone, contraction synchrony, contraction efficiency, interocclusal rest distance, amplitude of mandibular movement, and velocity. Try-in 2 showed better data than try-in 1 in all criteria: muscle tone (respectively 71% vs. 59%), contraction synchrony (79% vs. 75%), contraction efficiency (85% vs. 77%), an increase in range of motion of 3.3 mm, and a better velocity (0.35 ± 0.12 s vs. 0.57 ± 0.14 s, p = 0.008). The piezographic impression, in combination with CAD-CAM, allowed the comparison of two prosthetic designs and the selection of the try-in with the best neuro-musculo-kinetic results.

This report describes the successful treatment of an adult case of unilateral posterior crossbite caused by maxillary transverse deficiency with miniscrew-assisted rapid palatal expansion (MARPE). A female patient aged 35.5 years presented with masticatory disturbance, facial asymmetry, and unilateral posterior crossbite. She was diagnosed with unilateral posterior crossbite with a skeletal Class III jaw-base relationship and high mandibular plane angle. Her maxillary right and mandibular bilateral second premolars were congenitally absent, and the maxillary left second premolar was impacted. After the improvement of the posterior crossbite with MARPE, 0.018″ slot lingual brackets were placed on the maxillary and mandibular dentition. The total active treatment period was 22 months, and acceptable occlusion with a functional Class I relationship was achieved. Pretreatment and posttreatment cone-beam computed tomography images showed the disarticulation of the midpalatal suture after MARPE, and changes in the dental and nasomaxillary structures, nasal cavity, and pharyngeal airway. The case results demonstrate that MARPE produces greater skeletal expansion with minimal buccal tipping of the molars. MARPE may be effective for the treatment of maxillary transverse deficiency in adult patients.