Sandy Dolomite is a kind of widely distributed rock. The uniaxial compressive strength (UCS) of Sandy Dolomite is an important metric in the application in civil engineering, geotechnical engineering, and underground engineering. Direct measurement of UCS is costly, time-consuming, and even infeasible in some cases. To address this problem, we establish an indirect measuring method based on the convolutional neural network (CNN) and regression analysis (RA). The new method is straightforward and effective for UCS prediction, and has significant practical implications. To evaluate the performance of the new method, 158 dolomite samples of different sandification grades are collected for testing their UCS along and near the Yuxi section of the Central Yunnan Water Diversion (CYWD) Project in Yunnan Province, Southwest of China. Two regression equations with high correlation coefficients are established according to the RA results, to predict the UCS of Sandy Dolomites. Moreover, the minimum thickness of Sandy Dolomite was determined by the Schmidt hammer rebound test. Results show that CNN outperforms RA in terms of prediction the precision of Sandy Dolomite UCS. In addition, CNN can effectively deal with uncertainty in test results, making it one of the most effective tools for predicting the UCS of Sandy Dolomite.

UNASSIGNED: In 2020, our center established a Tanner-Whitehouse 3 (TW3) artificial intelligence (AI) system using a convolutional neural network (CNN), which was built upon 9059 radiographs. However, the system, upon which our study is based, lacked a gold standard for comparison and had not undergone thorough evaluation in different working environments.
UNASSIGNED: To further verify the applicability of the AI system in clinical bone age assessment (BAA) and to enhance the accuracy and homogeneity of BAA, a prospective multi-center validation was conducted. This study utilized 744 left-hand radiographs of patients, ranging from 1 to 20 years of age, with 378 boys and 366 girls. These radiographs were obtained from nine different children\'s hospitals between August and December 2020. The BAAs were performed using the TW3 AI system and were also reviewed by experienced reviewers. Bone age accuracy within 1 year, root mean square error (RMSE), and mean absolute error (MAE) were statistically calculated to evaluate the accuracy. Kappa test and Bland-Altman (B-A) plot were conducted to measure the diagnostic consistency.
UNASSIGNED: The system exhibited a high level of performance, producing results that closely aligned with those of the reviewers. It achieved a RMSE of 0.52 years and an accuracy of 94.55% for the radius, ulna, and short bones series. When assessing the carpal series of bones, the system achieved a RMSE of 0.85 years and an accuracy of 80.38%. Overall, the system displayed satisfactory accuracy and RMSE, particularly in patients over 7 years old. The system excelled in evaluating the carpal bone age of patients aged 1-6. Both the Kappa test and B-A plot demonstrated substantial consistency between the system and the reviewers, although the model encountered challenges in consistently distinguishing specific bones, such as the capitate. Furthermore, the system\'s performance proved acceptable across different genders and age groups, as well as radiography instruments.
UNASSIGNED: In this multi-center validation, the system showcased its potential to enhance the efficiency and consistency of healthy delivery, ultimately resulting in improved patient outcomes and reduced healthcare costs.

Purpose To develop a fully automated device- and sequence-independent convolutional neural network (CNN) for reliable and high-throughput labeling of heterogeneous, unstructured MRI data. Materials and Methods Retrospective, multicentric brain MRI data (2179 patients with glioblastoma, 8544 examinations, 63 327 sequences) from 249 hospitals and 29 scanner types were used to develop a network based on ResNet-18 architecture to differentiate nine MRI sequence types, including T1-weighted, postcontrast T1-weighted, T2-weighted, fluid-attenuated inversion recovery, susceptibility-weighted, apparent diffusion coefficient, diffusion-weighted (low and high b value), and gradient-recalled echo T2*-weighted and dynamic susceptibility contrast-related images. The two-dimensional-midsection images from each sequence were allocated to training or validation (approximately 80%) and testing (approximately 20%) using a stratified split to ensure balanced groups across institutions, patients, and MRI sequence types. The prediction accuracy was quantified for each sequence type, and subgroup comparison of model performance was performed using χ2 tests. Results On the test set, the overall accuracy of the CNN (ResNet-18) ensemble model among all sequence types was 97.9% (95% CI: 97.6, 98.1), ranging from 84.2% for susceptibility-weighted images (95% CI: 81.8, 86.6) to 99.8% for T2-weighted images (95% CI: 99.7, 99.9). The ResNet-18 model achieved significantly better accuracy compared with ResNet-50 despite its simpler architecture (97.9% vs 97.1%; P ≤ .001). The accuracy of the ResNet-18 model was not affected by the presence versus absence of tumor on the two-dimensional-midsection images for any sequence type (P > .05). Conclusion The developed CNN (www.github.com/neuroAI-HD/HD-SEQ-ID) reliably differentiates nine types of MRI sequences within multicenter and large-scale population neuroimaging data and may enhance the speed, accuracy, and efficiency of clinical and research neuroradiologic workflows. Keywords: MR-Imaging, Neural Networks, CNS, Brain/Brain Stem, Computer Applications-General (Informatics), Convolutional Neural Network (CNN), Deep Learning Algorithms, Machine Learning Algorithms Supplemental material is available for this article. © RSNA, 2023.

Although measuring worker productivity is crucial, the measurement of the productivity of each worker is challenging due to their dispersion across various construction jobsites. This paper presents a framework for measuring productivity based on an inertial measurement unit (IMU) and activity classification. Two deep learning algorithms and three sensor combinations were utilized to identify and analyze the feasibility of the framework in masonry work. Using the proposed method, worker activity classification could be performed with a maximum accuracy of 96.70% using the convolutional neural network model with multiple sensors, and a minimum accuracy of 72.11% using the long short-term memory (LSTM) model with a single sensor. Productivity could be measured with an accuracy of up to 96.47%. The main contributions of this study are the proposal of a method for classifying detailed activities and an exploration of the effect of the number of IMU sensors used in measuring worker productivity.

In this paper, a structural health monitoring (SHM) system is proposed to provide automatic early warning for detecting damage and its location in composite pipelines at an early stage. The study considers a basalt fiber reinforced polymer (BFRP) pipeline with an embedded Fiber Bragg grating (FBG) sensory system and first discusses the shortcomings and challenges with incorporating FBG sensors for accurate detection of damage information in pipelines. The novelty and the main focus of this study is, however, a proposed approach that relies on designing an integrated sensing-diagnostic SHM system that has the capability to detect damage in composite pipelines at an early stage via implementation of an artificial intelligence (AI)-based algorithm combining deep learning and other efficient machine learning methods using an Enhanced Convolutional Neural Network (ECNN) without retraining the model. The proposed architecture replaces the softmax layer by a k-Nearest Neighbor (k-NN) algorithm for inference. Finite element models are developed and calibrated by the results of pipe measurements under damage tests. The models are then used to assess the patterns of the strain distributions of the pipeline under internal pressure loading and under pressure changes due to bursts, and to find the relationship of strains at different locations axially and circumferentially. A prediction algorithm for pipe damage mechanisms using distributed strain patterns is also developed. The ECNN is designed and trained to identify the condition of pipe deterioration so the initiation of damage can be detected. The strain results from the current method and the available experimental results in the literature show excellent agreement. The average error between the ECNN data and FBG sensor data is 0.093%, thus confirming the reliability and accuracy of the proposed method. The proposed ECNN achieves high performance with 93.33% accuracy (P%), 91.18% regression rate (R%) and a 90.54% F1-score (F%).

Image recognition and neuroimaging are increasingly being used to understand the progression of Alzheimer\'s disease (AD). However, image data from single-photon emission computed tomography (SPECT) are limited. Medical image analysis requires large, labeled training datasets. Therefore, studies have focused on overcoming this problem. In this study, the detection performance of five convolutional neural network (CNN) models (MobileNet V2 and NASNetMobile (lightweight models); VGG16, Inception V3, and ResNet (heavier weight models)) on medical images was compared to establish a classification model for epidemiological research. Brain scan image data were collected from 99 subjects, and 4711 images were used. Demographic data were compared using the chi-squared test and one-way analysis of variance with Bonferroni\'s post hoc test. Accuracy and loss functions were used to evaluate the performance of CNN models. The cognitive abilities screening instrument and mini mental state exam scores of subjects with a clinical dementia rating (CDR) of 2 were considerably lower than those of subjects with a CDR of 1 or 0.5. This study analyzed the classification performance of various CNN models for medical images and proved the effectiveness of transfer learning in identifying the mild cognitive impairment, mild AD, and moderate AD scoring based on SPECT images.

Deep learning object-detection models are being successfully applied to develop computer-aided diagnosis systems for aiding polyp detection during colonoscopies. Here, we evidence the need to include negative samples for both (i) reducing false positives during the polyp-finding phase, by including images with artifacts that may confuse the detection models (e.g., medical instruments, water jets, feces, blood, excessive proximity of the camera to the colon wall, blurred images, etc.) that are usually not included in model development datasets, and (ii) correctly estimating a more realistic performance of the models. By retraining our previously developed YOLOv3-based detection model with a dataset that includes 15% of additional not-polyp images with a variety of artifacts, we were able to generally improve its F1 performance in our internal test datasets (from an average F1 of 0.869 to 0.893), which now include such type of images, as well as in four public datasets that include not-polyp images (from an average F1 of 0.695 to 0.722).

UNASSIGNED: Endoscopically visible gastric neoplastic lesions (GNLs), including early gastric cancer and intraepithelial neoplasia, should be accurately diagnosed and promptly treated. However, a high rate of missed diagnosis of GNLs contributes to the potential risk of the progression of gastric cancer. The aim of this study was to develop a deep learning-based computer-aided diagnosis (CAD) system for the diagnosis and segmentation of GNLs under magnifying endoscopy with narrow-band imaging (ME-NBI) in patients with suspected superficial lesions.
UNASSIGNED: ME-NBI images of patients with GNLs in two centers were retrospectively analysed. Two convolutional neural network (CNN) modules were developed and trained on these images. CNN1 was trained to diagnose GNLs, and CNN2 was trained for segmentation. An additional internal test set and an external test set from another center were used to evaluate the diagnosis and segmentation performance.
UNASSIGNED: CNN1 showed a diagnostic performance with an accuracy, sensitivity, specificity, positive predictive value (PPV) and negative predictive value (NPV) of 90.8%, 92.5%, 89.0%, 89.4% and 92.2%, respectively, and an area under the curve (AUC) of 0.928 in the internal test set. With CNN1 assistance, all endoscopists had a higher accuracy than for an independent diagnosis. The average intersection over union (IOU) between CNN2 and the ground truth was 0.5837, with a precision, recall and the Dice coefficient of 0.776, 0.983 and 0.867, respectively.
UNASSIGNED: This CAD system can be used as an auxiliary tool to diagnose and segment GNLs, assisting endoscopists in more accurately diagnosing GNLs and delineating their extent to improve the positive rate of lesion biopsy and ensure the integrity of endoscopic resection.

Autism spectrum disorder (ASD) is a neurological illness characterized by deficits in cognition, physical activities, and social skills. There is no specific medication to treat this illness; only early intervention can improve brain functionality. Since there is no medical test to identify ASD, a diagnosis might be challenging. In order to determine a diagnosis, doctors consider the child\'s behavior and developmental history. The human face can be used as a biomarker as it is one of the potential reflections of the brain and thus can be used as a simple and handy tool for early diagnosis. This study uses several deep convolutional neural network (CNN)-based transfer learning approaches to detect autistic children using the facial image. An empirical study is conducted to select the best optimizer and set of hyperparameters to achieve better prediction accuracy using the CNN model. After training and validating with the optimized setting, the modified Xception model demonstrates the best performance by achieving an accuracy of 95% on the test set, whereas the VGG19, ResNet50V2, MobileNetV2, and EfficientNetB0 achieved 86.5%, 94%, 92%, and 85.8%, accuracy, respectively. Our preliminary computational results demonstrate that our transfer learning approaches outperformed existing methods. Our modified model can be employed to assist doctors and practitioners in validating their initial screening to detect children with ASD disease.

UNASSIGNED: To evaluate the ability of fine-grained annotations to overcome shortcut learning in deep learning (DL)-based diagnosis using chest radiographs.
UNASSIGNED: Two DL models were developed using radiograph-level annotations (disease present: yes or no) and fine-grained lesion-level annotations (lesion bounding boxes), respectively named CheXNet and CheXDet. A total of 34 501 chest radiographs obtained from January 2005 to September 2019 were retrospectively collected and annotated regarding cardiomegaly, pleural effusion, mass, nodule, pneumonia, pneumothorax, tuberculosis, fracture, and aortic calcification. The internal classification performance and lesion localization performance of the models were compared on a testing set (n = 2922); external classification performance was compared on National Institutes of Health (NIH) Google (n = 4376) and PadChest (n = 24 536) datasets; and external lesion localization performance was compared on the NIH ChestX-ray14 dataset (n = 880). The models were also compared with radiologist performance on a subset of the internal testing set (n = 496). Performance was evaluated using receiver operating characteristic (ROC) curve analysis.
UNASSIGNED: Given sufficient training data, both models performed similarly to radiologists. CheXDet achieved significant improvement for external classification, such as classifying fracture on NIH Google (CheXDet area under the ROC curve [AUC], 0.67; CheXNet AUC, 0.51; P < .001) and PadChest (CheXDet AUC, 0.78; CheXNet AUC, 0.55; P < .001). CheXDet achieved higher lesion detection performance than CheXNet for most abnormalities on all datasets, such as detecting pneumothorax on the internal set (CheXDet jackknife alternative free-response ROC [JAFROC] figure of merit [FOM], 0.87; CheXNet JAFROC FOM, 0.13; P < .001) and NIH ChestX-ray14 (CheXDet JAFROC FOM, 0.55; CheXNet JAFROC FOM, 0.04; P < .001).
UNASSIGNED: Fine-grained annotations overcame shortcut learning and enabled DL models to identify correct lesion patterns, improving the generalizability of the models.Keywords: Computer-aided Diagnosis, Conventional Radiography, Convolutional Neural Network (CNN), Deep Learning Algorithms, Machine Learning Algorithms, Localization Supplemental material is available for this article © RSNA, 2022.