The secondary alveolar bone grafting procedure is typically recommended during the late mixed dentition phase, prior to the eruption of the permanent canine, in patients with cleft lip and palate. The anatomical and functional adaptations observed in the grafted area allow spontaneous migration and eruption of the adjacent maxillary canine. An alveolar bone graft can be performed using autogenous bone or recombinant human bone morphogenetic protein-2 (rhBMP-2). Employing rhBMP-2 in a collagen membrane eliminates the need for a donor site, thus reducing surgical morbidity. This paper aims to present a case involving complete orthodontic rehabilitation with a three-year follow-up of a male patient with a unilateral complete cleft lip and palate, posterior and anterior crossbite, where grafting was performed with rhBMP-2 at a single centre. Orthodontic intervention began at 8 years of age with rapid maxillary expansion, followed by facemask therapy. The alveolar bone grafting procedure was performed using rhBMP-2 in a collagen membrane, according to the surgical protocol developed by the Oslo team. Comprehensive orthodontic treatment started 15 months post bone grafting, during which the maxillary permanent lateral incisor distal to the alveolar cleft was successfully moved mesially into the grafted region. This intervention resulted in adequate occlusal and periodontal outcomes. The alveolar graft with rhBMP-2 produced adequate and stable alveolar bone formation, facilitating tooth eruption, orthodontic movement, and stability at the cleft site.

Alveolar ridge preservation (ARP) is a well-documented procedure to maintain bone volume after tooth extraction in order to place implants. However, at the end of the healing process, the residual biomaterial that is not reabsorbed remains embedded in the bone over time. Ribose cross-linked biomaterials demonstrated their ability to promote osteoconduction and complete resorption. The aim of this study was to evaluate the histological healing pattern of a novel ribose cross-linked collagen sponge used as a grafting material left exposed in human sockets at the time of tooth extraction. On a single patient, non-restorable lower first molars were extracted on both sides, and a ribose cross-linked collagen sponge was placed bilaterally in the cavities and left uncovered at the end of the surgery. After six months, core biopsies were taken immediately prior to implant placement; after the sample preparation, a histological analysis was performed. The results are very promising for substitution with newly formed bone and the amount of residual material. Ribose cross-linked collagen sponge could represent a valid alternative to conventional biomaterials for ARP procedures with no need for flap advancement and/or the addition of a membrane to cover the graft, reducing the invasiveness, complexity, and costs of the treatment.

OBJECTIVE: The aim of the present study was to evaluate clinical and radiographic outcomes of implants placed in alveolar sockets treated by means of alveolar ridge preservation after 10 years of follow-up.
METHODS: Eleven patients treated with 11 implants placed after alveolar ridge preservation using bovine-derived xenograft particles and collagen membrane were selected. Full-mouth plaque score, full-mouth bleeding score, probing depth at four sites per implant, and radiographic marginal bone level at mesial and distal aspects for each implant were recorded at baseline and after 10 years of follow-up. The primary outcome was the radiographic marginal bone loss. The marginal bone loss was considered as the difference between marginal bone level at baseline and after 10 years of observation time.
RESULTS: After 10 years of follow-up, full-mouth plaque score increased significantly (P < .05), while no statistically significant differences were found in the change in full-mouth bleeding score (P ≥ .05). At the 10-year observation period, a significant increase in probing depth was observed at all sites (P < .05), except at the mesial aspects (P ≥ .05). Radiographic marginal bone loss was 1.1 ± 0.1 mm and 1.0 ± 0.1 mm at mesial and distal sites, respectively.
CONCLUSIONS: Whitin the limitations of the present study, implants placed in post-extraction sockets treated with alveolar ridge preservation yielded stable clinical and radiographic results after 10 years of follow-up.

UNASSIGNED: To explore information seeking behavior on medical innovations.
UNASSIGNED: While autologous and alloplastic options for breast reconstruction are well established, it is the advent of the combination of 3D printing technology and the biocompatible nature of a highly porous biodegradable implants that offers new treatment options for the future. While this type of prosthesis is not yet clinically available understanding how patients, surgeons, and nurses take up new medical innovations is of critical importance for efficient healthcare provision.
UNASSIGNED: Using the largest ever combined sample of breast cancer patients (n = 689), specialist surgeons (n = 53), and breast care nurses (n = 101), we explore participants preference for a new surgical treatment concept rooted in 3D printed and biodegradable implant technologies in the context of breast reconstruction.
UNASSIGNED: We find that patients overwhelmingly favor information from a successful patient of the proposed new technology when considering transitioning. Surgeons and nurses instead favor regulatory body advice, peer-reviewed journals, and witnessing the procedure performed (either in person or online). But while 1 in 4 nurses nominated talking to a successful patient as an information source, not a single surgeon chose the same. Our multinomial logit analysis exploring patient preference (controlling for individual differences) showed statistically significant results for both the type of surgical treatment and choice to undergo reconstruction. Women who underwent a type of mastectomy procedure (compared with lumpectomy patients) were more likely to choose a former patient than a surgeon for seeking information relating to a new breast implant technology. Further, women who chose to undergo a reconstruction procedure, compared with those who did not, where more likely to prefer a surgeon for information relating to a new breast implant technology, rather than a successful patient. For medical professionals, we find no statistically significant relationship between medical professionals\' preference and their age, nor the number of other medical professionals they work with daily, nor the average number of breast procedures performed in their practice on a weekly basis.
UNASSIGNED: As our findings show large variation exists (both within our patient group and compared with medical professionals) in where individuals favor information on new medical innovations, future behavioral research is warranted.

An insufficient volume of the alveolar bone may prevent implants from being placed in the prosthetically optimal position. Complex restoration of bony structures is required to achieve long-term peri-implant bone stability and represents an adequate prosthetic solution. Background and Objectives: The shell technique has become a widespread and important method for guided bone regeneration in dentistry. Allogeneic bone materials appear to be the most similar substitution for autogenous bone transplants. However, there are few studies using cortical bone allografts in combination with a mix of autogenous and xenograft materials for the augmentation of horizontal ridge defects. This combination offers the advantage of reduced patient morbidity while adding adequate volume and contour to the alveolar ridge. Case report: The present case study aimed to clinically and radiographically evaluate the efficacy of allogenic cortical bone lamina combined with a composite bone graft in the augmentation of a horizontal bone defect in the edentulous maxilla during a 6-year follow-up period. Three CB CT scans taken before treatment, 6 months after the augmentation period/before implant placement, and after a 6-year follow-up period, were analyzed using stable referent points. After the 6 -year follow-up period, the average resorption rate was 21.65% on the augmented buccal side, with no implant exposure being observed. Conclusions: The bone shell technique used in conjunction with allogenic bone plates combined with autogenous bone, xenografts, and collagen membranes is an effective technique to manage horizontal ridge defects.

Orbital implant materials have evolved greatly over the past century and include but are not limited to metal, ceramic, polymer, silicone, and glass. Knowledge of historically used materials is clinically relevant to patient care as certain materials carry a greater risk of migration, extrusion, infection, and limitations for imaging modalities utilized to visualize adjacent structures. We report an unusual case of an 80-year-old male who presented to our community hospital with seizure-like activity. CT imaging of the brain revealed several white matter and cortex lesions with the largest lesion measuring 2.5 × 2 × 1.9 cm. The patient had a history of enucleation with placement of an orbital implant following a penetrating injury to the left eye at four years of age. Hounsfield scale analysis was read by radiology as being most consistent with a thin metallic shell surrounding the orbital implant. The potential for metallic material was consistent with the implant\'s age and time of placement. Few reviews on ocular implant materials from this period exist in the current medical literature. A single case report discussing a hollow metal orbital implant with similar-appearing imaging was identified. Due to concern for possible metal implant materials, the patient underwent implant exchange so MRI imaging could safely be performed. Intraoperatively, the implant was identified as a clear, hollow, non-metallic, non-porous polymer sphere. Following surgery, the patient was able to undergo appropriate neuroimaging with subsequent diagnostic biopsy. Current literature reviewing CT or photographic imaging of ocular implant devices prior to the 1940s is limited. This case highlights the importance of detailing materials historically used in orbital implants, their effects on clinical decision-making, and the utility of Hounsfield scale values to identify a material\'s radiodensity on CT imaging.

BACKGROUND: There are several indications for partial or total replacement of the temporomandibular joint (TMJ), including neoplasms and severe bone resorptions. In this regard, several techniques have been suggested to increase the functionality and longevity of these prosthetic devices. This case report describes the treatment of a TMJ ankylosis patient with the Puricelli biconvex arthroplasty (ABiP) technique, with a long-term follow-up.
METHODS: In 1978, a 33-year-old male polytraumatised patient developed painful symptoms in the right preauricular region, associated with restricted movement of the ipsilateral TMJ. Due to subcondylar fracture, an elastic maxillomandibular immobilisation (EMMI) was applied. Subsequently, the patient was referred for treatment when limitations of the interincisal opening (10 mm) and the presence of spontaneous pain that increased on palpation were confirmed. Imaging exams confirmed the fracture, with anteromedial displacement and bony ankylosis of the joint. Exeresis of the compromised tissues and their replacement through ABiP was indicated. The method uses conservative access (i.e., preauricular incision), partial resection of the ankylosed mass, and tissue replacement using two poly(methyl methacrylate) components, with minimal and stable contact between the convex surfaces. At the end of the procedure, joint stability and dental occlusion were tested. The patient showed significant improvement at the postoperative 6-month follow-up, with no pain and increased mouth opening range (30 mm). At the 43-year follow-up, no joint noises, pain or movement restrictions were reported (mouth opening of 36 mm). Imaging exams did not indicate tissue degeneration and showed the integrity of prosthetic components.
CONCLUSIONS: The present case report indicates that ABiP enables joint movements of the TMJ, allowing the remission of signs and symptoms over more than 40 years of follow-up. These data suggest that this technique is a simple and effective alternative when there is an indication for TMJ reconstruction in adult patients with ankylosis.

Although cancer-associated fibroblasts (CAFs) have gained increased attention for supporting cancer progression, current CAF-targeted therapeutic options are limited and failing in clinical trials. As the largest component of the tumor microenvironment (TME), CAFs alter the biochemical and physical structure of the TME, modulating cancer progression. Here, we review the role of CAFs in altering drug response, modifying the TME mechanics and the current models for studying CAFs. To provide new perspectives, we highlight key considerations of CAF activity and discuss emerging technologies that can better address CAFs; and therefore, increase the likelihood of therapeutic efficacy. We argue that CAFs are crucial components of the cancer drug discovery pipeline and incorporating these cells will improve drug discovery success rates.
Recent advances in cancer research have improved our understanding of disease progression; however, the number of drugs failing in clinical trials remains high and therefore, present a critical challenge for cancer drug discovery. Although the interactions of the tissue surrounding the tumor, the tumor microenvironment, are now considered key targets for new interventions in cancer, the role of microenvironment is largely absent in drug discovery pipelines. Here we explore the role of the most prominent cell type in the tumor microenvironment, cancer-associated fibroblasts (CAFs), in altering cancer therapy response and ultimately patient outcome. To provide new perspectives for future studies, we draw attention to key complications of CAF biology and highlight emerging technologies that could be used to address this. We believe including CAFs in drug discovery, whether for targeting cancer cells or the microenvironment, will allow for a better understanding of therapeutic efficacy and ultimately improve clinical outcome.

BACKGROUND: Studies evaluating guided bone regeneration (GBR) on knife-edge ridges using absorbable membranes with staged approaches have reported various horizontal bone gains. This study compared the horizontal bone gain obtained via a conventional technique of GBR and a recently-reported technique. Bone loss during the healing process was also measured.
METHODS: Consecutive patients who underwent GBR on knife-edge ridges via a conventional technique (control group) or the Sausage Technique (test group) were included in this study. GBR was performed using a collagen membrane and deproteinized bovine bone mineral combined with an autogenous graft at a 1:1 ratio. Cone-beam computed tomography (CBCT) was performed preoperatively, postoperatively, and after the patient healed. Horizontal bone width was measured on CBCT images 2 mm apical from the top of the crest. The preoperative CBCT and posthealing CBCT were superimposed to calculate the bone gain after healing, and the preoperative and postoperative CBCT scans were superimposed to calculate the bone gain after surgery. Bone loss during healing was calculated by subtracting the width of the ridge after healing from the postoperative width.
RESULTS: The mean horizontal bone gain was significantly lower in the control group (2.7 ± 1.8 mm; 83.2%) than in the test group (5.3 ± 2.3 mm; 216.8%) (p = 0.003). The average horizontal bone loss between regeneration and implant placement was 0.9 mm in the control group (27.9%) and 2.1 mm in the test group (29.4%). While the absolute bone loss was significantly different (p = 0.012), the percentage of bone resorption was not (p = 0.608).
CONCLUSIONS: The new technique resulted in significantly more bone gain than a conventional GBR technique. The rate of graft resorption during healing was stable regardless of the amount of grafted material.

In the era of the coronavirus pandemic, one of the most demanding areas was the supply of healthcare systems in essential Personal Protection Equipment (PPE), including face-shields and hands-free door openers. This need, impossible to fill by traditional manufacturing methods, was met by implementing of such emerging technologies as additive manufacturing (AM/3D printing). In this article, Poly(lactic acid) (PLA) filaments for Fused filament fabrication (FFF) technology in the context of the antibacterial properties of finished products were analyzed. The methodology included 2D radiography and scanning electron microscopy (SEM) analysis to determine the presence of antimicrobial additives in the material and their impact on such hospital pathogens as Staphylococcus aureus, Pseudomonas aeruginosa, and Clostridium difficile. The results show that not all tested materials displayed the expected antimicrobial properties after processing in FFF technology. The results showed that in the case of specific species of bacteria, the FFF samples, produced using the declared antibacterial materials, may even stimulate the microbial growth. The novelty of the results relies on methodological approach exceeding scope of ISO 22196 standard and is based on tests with three different species of bacteria in two types of media simulating common body fluids that can be found on frequently touched, nosocomial surfaces. The data presented in this article is of pivotal meaning taking under consideration the increasing interest in application of such products in the clinical setting.