Green synthesis of nanomaterials is advancing due to their ease of synthesis, cheapness, nontoxicity, and renewability. An environmentally friendly biogenic method has been developed for the green synthesis of nickel oxide nanoparticles (NiO NPs) using phytochemical-rich bioextract. They are rich in bioextract phenolics, flavonoids, and berberine. These phytochemicals successfully reduce and stabilize NiNO3 into NiO NPs. In this study, NiO NPs were synthesized by the green synthesis method from Lupinus Albus. Characterization of NiO NPs was carried out by TEM, XRD, SEM, UV, XRF, BET, and EDX analyses. According to XRD analysis, TEM results also support this, where the NiO NPs particle size diameter is 5 nm. It was determined by the Tauc equation that the band energy gap of NiO NPs is 1.69 eV. It was determined that the BET surface area of NiO NPs was 49.6 m2/g. NiO nanoparticles synthesized from Lupinus Albus extract by the green synthesis method were used as catalysts in the photocatalytic reduction of methylene blue with NaBH4. In the photocatalytic reduction of methylene blue with NaBH4, it was determined that there was no color change in 48 h without a catalyst, and in the presence of NiO nanoparticle catalyst, methylene blue was reduced by 97% in 8 min. The kinetics of the photocatalytic reduction of methylene blue with NaBH4 is a pseudo-first-order kinetic model and the kinetic rate constant is determined as 0.66 min-1, indicating that the catalytic effect of NiO NPs is very high at this value. NiO NPs were used five times in the photocatalytic reduction of methylene blue with NaBH4 and it was determined that the reduction of methylene blue was over 90% in each use.
NiO nanoparticles were synthesized from Lupinus Albus extract by green synthesis, which is an easily applied, cost-effective, and environmentally friendly method. The synthesized NiO nanoparticles were characterized using various characterization techniques. NiO nanoparticles have a high catalytic effect in the photocatalytic reduction of methylene blue with NaBH4. Photocatalytic reduction of methylene blue with uncatalyzed NaBH4 could not be achieved, and 97% reduction of methylene blue was completed in 8 min in the presence of NiO nanoparticle catalyst.

In this study, ethylene diamine-coated reduced graphene oxide-supported silver composite (Ag/rGO-ED) was synthesized and used as an efficient catalyst for the decolorization of methylene blue (MB) in the presence of NaBH4. The morphology of the obtained material was elucidated using field emission scanning electron microscopy (FE-SEM), Fourier-transform infrared spectroscopy (FTIR), energy-dispersive X-ray analysis (EDX), transmission electron microscopy (TEM), and X-ray diffraction (XRD) techniques. The influences of four parameters (MB concentration (mg/L), NaBH4 amount (mM), catalyst amount (g/L), and contact time (s)) on the decolorization process were appraised and optimized via response surface methodology (RSM). For the decolorization of MB, the optimum solutions were obtained as Co of 32.49 mg/L, NaBH4 amount of 152.89 mM, catalyst amount of 0.83 g/L, and 101.39 s contact time with MB decolorization efficiency of 97.73%. MB, a pollutant in wastewater, was decolorized rapidly by Ag/rGO-ED with an efficiency of approximately 97%. The exploration of kinetics and thermodynamics was another major emphasis of the work. The activation energy (Ea) and rate constant (k) for the decolorization of MB were obtained as 37.9 kJ/mol and 0.0135 s-1, respectively. The obtained results show that the catalyst, a new composite material in the literature, is promising for decolorization of wastewater.

In this study, three acid mine drainage (AMD) sources were investigated as potential sources of iron for the synthesis of iron nanoparticles using green tea extract (an environmentally friendly reductant) or sodium borohydride (a chemical reductant). Electrical conductivity (EC), total dissolved solids (TDS), dissolved oxygen (DO), oxidation-reduction potential (ORP), ion chromatography (IC), and inductively coupled plasma-mass spectroscopy (ICP-MS) techniques were used to characterize the AMD, and the most suitable AMD sample was selected based on availability. Additionally, three tea extracts were characterized using ferric-reducing antioxidant power (FRAP) and 2,2-diphenyl-1-picryl-hydrazine-hydrate (DPPH), and the most suitable environmentally friendly reductant was selected based on the highest FRAP (1152 µmol FeII/g) and DPPH (71%) values. The synthesized iron nanoparticles were characterized and compared using XRD, STEM, Image J, EDS, and FTIR analytical techniques. The study shows that the novel iron nanoparticles produced using the selected green tea (57 nm) and AMD were stable under air due to the surface modification by polyphenols contained in green tea extract, whereas the nanoparticles produced using sodium borohydride (67 nm) were unstable under air and produced a toxic supernatant. Both the AMD-based iron nanoparticles can be used as Fenton-like catalysts for the decoloration of methylene blue solution. While 99% decoloration was achieved by the borohydride-synthesized nanoparticles, 81% decoloration was achieved using green tea-synthesized nanoparticles.

This work focuses on the comparison of H2 evolution in the hydrolysis of boron-containing hydrides (NaBH4, NH3BH3, and (CH2NH2BH3)2) over the Co metal catalyst and the Co3O4-based catalysts. The Co3O4 catalysts were activated in the reaction medium, and a small amount of CuO was added to activate Co3O4 under the action of weaker reducers (NH3BH3, (CH2NH2BH3)2). The high activity of Co3O4 has been previously associated with its reduced states (nanosized CoBn). The performed DFT modeling shows that activating water on the metal-like surface requires overcoming a higher energy barrier compared to hydride activation. The novelty of this study lies in its focus on understanding the impact of the remaining cobalt oxide phase. The XRD, TPR H2, TEM, Raman, and ATR FTIR confirm the formation of oxygen vacancies in the Co3O4 structure in the reaction medium, which increases the amount of adsorbed water. The kinetic isotopic effect measurements in D2O, as well as DFT modeling, reveal differences in water activation between Co and Co3O4-based catalysts. It can be assumed that the oxide phase serves not only as a precursor and support for the reduced nanosized cobalt active component but also as a key catalyst component that improves water activation.

NiO nanoparticles were synthesized from pine cone extract by green synthesis method, which is a simple, cost-effective, environmentally friendly and sustainable method. The particle size of NiO nanoparticles was determined to be in the range of 10-25 nm by X-diffraction differential and transmission electron microscope analysis, and the bandgap energy of NiO nanoparticles was determined to be 2.66 eV. The catalytic effect of NiO nanoparticles in both microwave-assisted sodium borohydride hydrolysis and photocatalytic reduction of methylene blue was examined and it was determined that they had a high catalytic effect in both applications. It was determined that the hydrogen production rate in sodium borohydride hydrolysis was 1135 mL/g/min. The activation energy of sodium borohydride hydrolysis is 29.69 kJ/mol and 29.59 kJ/mol for the nth-order and Langmuir Hinshelwood kinetic models, respectively. In the photocatalytic reduction of methylene blue with NaBH4, it was determined that the reduction did not occur in the absence of a catalyst, but in the presence of the catalyst, the reduction occurred 98% in 3 min. It was determined that NiO nanoparticles were used five times in the photocatalytic reduction of methylene blue and the reduction efficiency for the fifth time was 93%. It was determined that the photocatalytic reduction of methylene blue was pseudo-first order and the rate constant was 1.63 s-1. It was determined that NiO nanoparticles synthesized by the environmentally friendly green synthesis method can be used as catalysts for two different applications.
NiO nanoparticles were synthesized from pinecone extract in a simple, cost-effective, and green method. The synthesized NiO nanoparticles were characterized using various characterization techniques. NiO nanoparticles have high activity both in the photocatalytic reduction of methylene blue and in the hydrolysis of sodium borohydride, and they are catalysts with high activity in two different applications. Photocatalytic reduction of methylene blue with uncatalyzed NaBH4 was not achieved and was completed in 3 min in the presence of NiO nanoparticle catalyst. It was determined that the hydrogen production rate in sodium borohydride hydrolysis was 1135 mL/g/min. NiO nanoparticle catalysts have low activation energy for sodium borohydride hydrolysis.

The global production of plywood is constantly increasing as its application in the furniture and interior decoration industry becomes more widespread. An urgent issue is how to decrease the formaldehyde released from plywood, considering its carcinogenic effect on humans and harm to the environment. Reducing the free formaldehyde content of the urea formaldehyde (UF) adhesives used in the preparation process is considered an effective method. Therefore, it is necessary to identify a new type of formaldehyde scavengers. Here, the strongly reducing substance sodium borohydride was used to reduce and degrade the free formaldehyde in UF adhesives, and its effects on the properties of the UF adhesive and plywood were studied. When 0.7% sodium borohydride was added to the UF adhesive with a molar ratio of formaldehyde to urea of 1.4:1, the free formaldehyde content of the UF resin decreased to 0.21%, which is 53% lower than that of the untreated control. Moreover, the formaldehyde released from the plywood was reduced to 0.81 mg/L, ~45% lower than that from the group. The bonding strength of the treated samples could reach ~1.1 MPa, which was only reduced by ~4% compared to that of the control. This study of removing formaldehyde from UF adhesive by reduction could provide a new approach for suppressing formaldehyde release from the final products.

Nano-sized silver has drawn a great deal of attention in the field of health sciences owing to its remarkable therapeutic applications. Interestingly, the method applied to synthesize nanoparticles and the choice of reagents considerably influence their therapeutic potential and toxicities. Current research has explored the toxicity, anti-inflammatory, antinociceptive, and antioxidant responses of the malonic acid-capped silver nanoparticles (MA-AgNPs (C) by using sodium borohydride as a reducing agent at low temperatures by employing both in vitro and in vivo approaches. Furthermore, it has highlighted the synergistic effect of these novel compounds with conventional anti-inflammatory therapeutic agents. Acute and sub-acute toxicity analysis performed following OECD guidelines showed that the studied MA-AgNPs (C) are safer, and prominent toxic signs have not been detected at the highest studied dose of 2,000 mg/kg. Cytotoxicity evaluation through brine shrimp lethality revealed 20% lethality at the highest concentration of 169.8 μg/mL. Significantly, positive anti-inflammatory and analgesic responses alone as well as synergism with the standard were identified through in vitro as well as in vivo methods which were more potent at a lower dose (200 mg/kg). Notably synergistic outcomes were more pronounced than individual ones, indicating their prominent effect as a feasible drug delivery system. IL-6 and TNF-α assessment in excised paw tissue through RTPCR technique further supported their anti-inflammatory potential. DPPH assay revealed eminent in vitro antioxidant activity which was further corroborated by in vivo antioxidant assessment through evaluation of SOD in excised paw tissue.

Silver nanoparticles (AgNPs) in the form of nanospheres from a few nm to 100 nm in diameter were synthesized in a controlled manner using a combination of two reducing agents: sodium borohydride (SBH) and trisodium citrate (TSC). The influence of the size of AgNPs on antibacterial activity was investigated with different concentrations of AgNPs on two types of bacteria:Pseudomonas aeruginosa(PA) andStaphylococcus aureusresistant (SA) while the positive control wasAmpicillin (Amp)50μg/ml and the negative control was water. AgNPs were investigated for morphology, size and size distribution using transmission electron microscopy (TEM) and dynamic light scattering (DLS) measurements. The optical properties of the AgNPs were investigated by recording their UV-vis absorption spectra. The antimicrobial activity of AgNPs was determined using the disc diffusion method. The results showed that the antibacterial ability of AgNPs depends on both concentration and particle size. With a particle concentration of 50μg ml-1, the antibacterial ability is the best. The smaller the particle size, the higher the antibacterial ability. The simultaneous use of two reducing agents TSC and SBH is the novelty of the article to synthesize AgNPs particles that are uniform in shape and size while controlling the particle size. On that basis, their antibacterial performance is increased.

Sodium borohydride (NaBH4 ) has earned recognition as a promising hydrogen carrier, attributed to its exceptional hydrogen storage capacity, boasting a high theoretical storage capacity of 10.8 wt %. Nonetheless, the utilization of traditional pyrolysis and hydrolysis methods still presents a formidable challenge in achieving controlled hydrogen generation especially under ambient conditions. In this work, we report an innovative electrochemical strategy for production H2 by coupling NaBH4 electrooxidation reaction (BOR) at anode in alkaline media with hydrogen evolution reaction (HER) at cathode in acidic media. To implement this, we have developed a bifunctional electrocatalyst denoted as Pd-Mo2 C@CNTs, wherein Pd nanoparticles are grown in situ on Mo2 C embedded within N-doped carbon nanotubes. This electrocatalyst demonstrates exceptional performance in catalyzing both alkaline BOR and acidic HER. We have developed a hybrid acid/alkali cell, utilizing Pd/Mo2 C@CNTs as the anode and cathode electrocatalysts. This configuration showcases remarkable capabilities for self-sustained, precise, and uninterrupted indirect release of H2 stored in NaBH4 , even at high current densities of 100 mA cm-2 with a Faraday efficiency approaching 100 %. Additionally, this electrochemical device exhibits significant promise as a fuel cell, with the ability to deliver a maximum power density of 20 mW cm-2 .

Borohydride imidazolium ionic liquids, [IL]BH4, used for the first time as reductants in the N-formylation of various amines with CO2, provided an excellent yield of formamides. Under the same conditions, 5 bar CO2 and 80 °C, NaBH4 produced a mixture of N-formylated and N-methylated products in a ratio of 1 : 2. An alternative approach, based on the addition of halide imidazolium salts ([IL]Cl or [IL]Br) to the reactions of amine with NaBH4 and CO2, resulted in a significant increase of selectivity to formamide. However, no effect was noted for [IL]BF4 and [IL]PF6. Monitoring the reaction course in time using 1H NMR brought about new insight into the role of BH3 in the reduction of CO2 and the functionalization of amines. The formation of N-methylaniline - borane intermediate was evidenced.