UNASSIGNED: Screws for graft fixation are available in 3 different materials for anterior cruciate ligament reconstruction (ACLR) with the Tape Locking Screw (TLS) technique: titanium, poly-l-lactic acid bioabsorbable, and polyetheretherketone (PEEK).
UNASSIGNED: To compare the effect of the 3 different fixation materials on graft and implant survival after ACLR with the TLS technique.
UNASSIGNED: Cohort study; Level of evidence, 3.
UNASSIGNED: Included were 521 patients from the French Prospective ACL Study (FAST) cohort who underwent primary surgical ACLR with the TLS technique. Patients were divided into 3 groups depending on the type of screw material used: titanium (TLS-T group), poly-l-lactic acid bioabsorbable (TLS-B group), or PEEK (TLS-P group). The primary endpoint was a retear within 2 years after ACLR. The secondary endpoints were complication rate, return to sports rate, and functional scores. Objective and subjective functional scores-including the International Knee Documentation Committee, the Knee injury and Osteoarthritis Outcome Score (KOOS), and the Lysholm score-were evaluated preoperatively and at the 2-year follow-up. Pain was assessed with the KOOS-Pain subscore recorded pre- and postoperatively every 6 months up to 2 years. Patient satisfaction was recorded at the 2-year follow-up.
UNASSIGNED: No significant differences between the study groups were found in retear rates (4.4%, 4.5%, and 4.3% in the TLS-T, TLS-P, and TLS-B groups 2 years after surgery) or subjective and objective outcomes. The TLS-T group had the lowest rate of intraoperative implant-related complications (0.9%) compared with the TLS-P (4.3%) and TLS-B (7.7%) groups. Young age was a significant risk factor for retear in the TLS-T (P = .03) and TLS-B (P = .0001) groups, while a high level of sports was found to be a significant risk factor in the TLS-P (P = .04) group. All functional scores improved significantly at the 2-year follow-up (P < .0001), with no significant group difference. The KOOS-Pain subscore improved continuously with no significant group difference. The rate of return to preinjury sports was between 43.4% and 58.6%. The rate of highly satisfied patients at the final follow-up was between 86.2% and 91.8%.
UNASSIGNED: There was no difference in retear rate or objective and subjective functional scores between implant materials for TLS ACLR in this study.

BACKGROUND: Multi-rooted teeth with extensive dental defects often face challenges in stability and biomechanical failure. High-performance polymer PEEK materials, with properties closer to dentin, show promise in reducing stress concentration and preserving tooth structure. This report aimed to explore the use of a highly retentive polyetheretherketone (PEEK) for manufacturing custom-made split post and core for the restoration of grossly destroyed endodontically treated molars.
METHODS: A 40-year-old female patient presented with complaints of loss of tooth substance in the posterior mandibular tooth. This case involved the digital design and fabrication of PEEK split post and core to restore multirooted molar with insufficient dental tissue remnants. The restorations were evaluated over a 3-year follow-up using the World Federation criteria (FDI). The restoration was clinically evaluated through intraoral examination, radiographic assessment, and subjective patient satisfaction, and was deemed clinically good according to FDI criteria.
CONCLUSIONS: The outstanding mechanical properties of PEEK, coupled with the structure of the split post, provide an effective treatment option for weakened multirooted teeth. Simultaneously, the restoration configuration effectively addressed the challenge of varying postinsertion directions, and the interlocking mechanism between the primary and auxiliary posts enhanced the stability of the post and core.

Recent studies have indicated that the nucleotide-binding oligomerization domain-like receptor family pyrin domain-containing 3 (NLRP3) inflammasome is an ideal therapeutic target for osteoporosis because it affects the differentiation of osteoblasts and osteoclasts. RNA sequencing utilizing multifunctional graphene oxide (GO) nanosheets revealed a correlation between GO nanomaterials and the NLRP3 inflammasome, as well as osteogenic genes in macrophages. This study aimed to construct a bone microenvironment-responsive multifunctional two-dimensional GO coating on the surface of microporous sulfonated polyetheretherketone (SPEEK) via polydopamine modification (SPEEK@PDA-GO). In vitro analysis showed that the SPEEK@PDA-GO implants weakened the STAT3-mediated NLRP3/caspase-1/IL-1β signaling pathway in macrophages and subsequently prevented the formation of an extracellular inflammatory microenvironment, which is crucial for osteoclastogenesis. SPEEK@PDA-GO displayed significantly higher expression of M2 macrophage markers and osteogenic genes, indicating that the multifunctional GO nanosheets could facilitate bone regeneration via their immunomodulatory properties. The ability of SPEEK@PDA-GO to stimulate new bone formation and block bone loss caused by estrogen loss due to ovariectomy was also analyzed. The findings of this study offer valuable information on the possible involvement of the NLRP3 inflammasome in the interaction between the immune system and bone health in patients with osteoporosis.

OBJECTIVE: Nonunion and significant subsidence after anterior cervical discectomy and fusion (ACDF) are associated with poor clinical outcomes, which occasionally lead to revision surgery. Allograft and polyetheretherketone (PEEK) cages are the two most commonly used interbody spacer devices for ACDF. Although studies have been conducted to compare the efficacies of these two interbody materials, the question remains regarding the superiority of one over the other. Therefore, the authors conducted a systematic review and meta-analysis to compare nonunion, subsidence, and reoperation rates after ACDF using allograft and PEEK cages as interbody devices.
METHODS: In this systematic review and meta-analysis, the authors systematically searched the MEDLINE, EMBASE, and Cochrane Library databases for studies published prior to November 2023 that compared the efficacy and safety of allograft and PEEK cages for ACDF. A pooled analysis was designed to identify differences in nonunion, subsidence, and reoperation rates between the two interbody devices.
RESULTS: Ten studies involving 1462 patients (allograft, 852 patients; PEEK cage, 610 patients) were included. The pooled analysis demonstrated that allograft had a significantly lower rate of nonunion compared to that of PEEK cages (OR 0.33, 95% CI 0.14-0.79; p = 0.01). Furthermore, the reoperation rate due to nonunion was significantly higher with PEEK cages compared to that with allograft (OR 0.28, 95% CI 0.11-0.71; p < 0.01), whereas the reoperation rate due to overall causes did not display significant results (OR 0.38, 95% CI 0.11-1.29; p = 0.12). The incidence of significant subsidence (OR 0.66, 95% CI 0.28-1.55; p = 0.34) and the mean amount of subsidence (standard mean difference 0.03, 95% CI -0.42 to 0.47; p = 0.90) did not demonstrate significant differences between allograft and PEEK cages.
CONCLUSIONS: Overall, the current meta-analysis suggests the advantages of allograft over PEEK cages used for ACDF, due to an enhanced fusion rate and minimized revision risk, with no increase in the risk of subsidence.

This study presents a scanning electron microscopy analysis of a failed PEEK retainer in an orthodontic patient. After 15 months of use, the patient reported a gap opening between teeth 41 and 42. The PEEK retainer was removed and sent for electron microscope analysis. To investigate the failure, scanning electron microscopy was employed to assess the microstructure and composition of the retainer at various magnifications. These findings suggest that the failure of the PEEK retainer was multifaceted, implicating factors such as material defects, manufacturing flaws, inadequate design, environmental factors, and patient-related factors. In conclusion, this scanning electron microscopy analysis offers valuable insights into the failure mechanisms of PEEK retainers in orthodontic applications. Further research is necessary to explore preventive strategies and optimize the design and fabrication of PEEK retainers, minimizing the occurrence of failures in orthodontic practice.

Today, it would be difficult for us to live a full life without polymers, especially in medicine, where its applicability is constantly expanding, giving satisfactory results without any harm effects on health. This study focused on the formation of hexagonal domains doped with AgNPs using a KrF excimer laser (λ=248 nm) on the polyetheretherketone (PEEK) surface that acts as an unfailing source of the antibacterial agent - silver. The hexagonal structure was formed with a grid placed in front of the incident laser beam. Surfaces with immobilized silver nanoparticles (AgNPs) were observed by AFM and SEM. Changes in surface chemistry were studied by XPS. To determine the concentration of released Ag+ ions, ICP-MS analysis was used. The antibacterial tests proved the antibacterial efficacy of Ag-doped PEEK composites against Escherichia coli and Staphylococcus aureus as the most common pathogens. Because AgNPs are also known for their strong toxicity, we also included cytotoxicity tests in this study. The findings presented here contribute to the advancement of materials design in the biomedical field, offering a novel starting point for combating bacterial infections through the innovative integration of AgNPs into inert synthetic polymers.

Polyetheretherketone (PEEK) is a high-performance polymer suitable for use in biomedical coatings. The implants based on PEEK have been extensively studied in dental and orthopedic fields. However, their inherent inert surfaces and poor osteogenic properties limit their broader clinical applications. Thus, there is a pressing need to produce a multifunctional PEEK implant to address this issue. In response, we developed sulfonated PEEK (sPEEK)-Cobalt-parathyroid hormone (PTH) materials featuring multifunctional nanostructures. This involved loading cobalt (Co) ions and PTH (1-34) protein onto the PEEK implant to tackle this challenge. The findings revealed that the controlled release of Co2+ notably enhanced the vascular formation and the expression of angiogenic-related genes, and offered antimicrobial capabilities for sPEEK-Co-PTH materials. Additionally, the sPEEK-Co-PTH group exhibited improved cell compatibility and bone regeneration capacity in terms of cell activity, alkaline phosphatase (ALP) staining, matrix mineralization and osteogenic gene expression. It surpassed solely sulfonated and other functionalized sPEEK groups, demonstrating comparable efficacy even when compared to the titanium (Ti) group. Crucially, animal experiments also corroborated the significant enhancement of osteogenesis due to the dual loading of cobalt ions and PTH (1-34). This study demonstrated the potential of bioactive Co2+ and PTH (1-34) for bone replacement, optimizing the bone integration of PEEK implants in clinical applications.

BACKGROUND: Preservation of the remaining structures while maintaining an esthetic appearance is a major objective in removable partial prosthodontics. So, the aim of the current study was to compare the stresses induced on the supporting structures by two digitally produced esthetic core materials; Zirconia and Polyetheretherketone when used as an extracoronal attachment in distal extension removable partial dentures using strain gauge analysis.
METHODS: A mandibular Kennedy class II stone cast with the necessary abutments\' preparations was scanned. The mandibular left canine and first premolar teeth were virtually removed. An acrylic mandibular left canine and first premolar teeth were prepared with heavy chamfer finish line and scanned. Virtual superimposition of the acrylic teeth in their corresponding positions was done. Two strain gauge slots were designed: distal to the terminal abutment and in the residual ridge. Two models and two sets of scanned teeth were digitally printed. The printed teeth were then placed in their corresponding sockets in each model and scanned. The attachment design was selected from the software library and milled out of Zirconia in the model ZR and Polyetheretherketone in the model PE. Five removable partial dentures were constructed for each model. The strain gauges were installed in their grooves. A Universal testing machine was used for unilateral load application of 100 N (N). For each removable partial denture, five measurements were made. The data followed normal distribution and were statistically analyzed by using unpaired t test. P value < 0.05 was considered to be statistically significant.
RESULTS: During unilateral loading unpaired t test showed statistically significant difference (p = 0.0001) in the microstrain values recorded distal to the abutment between the models ZR (-1001.6 µε ± 24.56) and PE (-682.6 µε ± 22.18). However, non statistically significant difference (p = 0.3122) was observed in the residual ridge between them; ZR (16.2 µε ± 4.53) and PE (15 µε ± 3.74).
CONCLUSIONS: In removable partial dentures, Polyetheretherketone extracoronal attachment induces less stress on the supporting abutments compared to the zirconia one with no difference in the stresses induced by them on the residual ridge.

UNASSIGNED: This was a retrospective longitudinal observational study.
UNASSIGNED: The purpose of this study was to analyze the results of cervical sagittal parameters on preoperative and postoperative lateral radiographs in anterior cervical discectomy and fusion (ACDF). ACDF is believed to change craniocervical parameters and thus cervical curvature using polyetheretherketone (PEEK) or titanium cages with or without self-locking as well as an anterior plate, the latter of which has not been shown to provide better clinical or radiological results.
UNASSIGNED: Cervical spondylotic myelopathy (CSM) is a common degenerative pathology that can affect one or more levels and treatment has varied over time trying to maintain sagittal parameters within acceptable values where the ACDF is the main treatment.
UNASSIGNED: The study was performed in patients with CSM who underwent anterior cervical discectomy, and their pre- and postoperative radiographs were analyzed using Surgimap software a few days before and 3 months after surgery.
UNASSIGNED: Fifteen files were included in the study. Statistically significant sagittal balance variables were observed in cervical lordosis (CL) with an increase of 4.73° (P = 0.019) and T1 slope (T1S)-CL with a decrease of -5.93° (P = 0.007).
UNASSIGNED: CL and T1S-CL showed favorably modified values when performing ACDF using stand-alone PEEK cages without the need for self-blocking or an anterior plate.

OBJECTIVE: To evaluate the effect of different adhesives and veneering resins on the shear bond strength (SBS) of polyetheretherketone (PEEK).
METHODS: A total of 138 PEEK specimens were randomly divided into 6 groups according to adhesive material application: Control (C, no application), Adhese Universal (A) (Ivoclar Vivadent, Schaan, Liechtenstein), Gluma Bond Universal (G) (Heraeus Kulzer, South Bend, IN, USA), G-PremioBOND (P) (GC Corporation, Tokyo, Japan), Single Bond Universal (S) (3M, Saint Paul, MN, USA) and visio.link (V) (Bredent, Senden, Germany). Each adhesive group was divided into two subgroups according to the type of veneering material: Estenia direct composite (D) and Gradia Plus indirect composite (IN) (both GC Corporation). After the veneering process, the specimens were aged by thermal cycling. Kruskal-Wallis and Mann-Whitney U tests were used for SBS analysis (P < 0.05).
RESULTS: The highest SBS results were obtained in the VIN group, followed by the VD, PD, GIN, AIN, AD, SIN, SD, PIN, GD, CIN and CD groups, respectively (P = 0.001). There were no significant differences in terms of the type of veneering composite when the same adhesive was applied (P > 0.05), except for Gluma Bond Universal (P = 0.009). All the adhesives tested showed clinically acceptable SBS results.
CONCLUSIONS: Visio.link offered the highest adhesion to PEEK, whereas the tested universal adhesives may be used as an alternative to visio.link in clinical settings. It was determined that changing the veneer type has no statistical difference when the same adhesive material is used.