Gaidropsarus mauritanicus sp. nov. is described from one specimen collected using a grab sample from the Tanoûdêrt Canyon (ca. 20° N) off Mauritania at a depth of 595 m. The new species was further observed during eight remotely operated vehicle (ROV) dives along the Mauritanian slope southwards down to the Tiguent Coral Mound Complex (~17° N) in a bathymetric range between 613 and 416 m. It can be distinguished from congeners by a combination of characteristics, including large eyes (38.1% head length [HL]), large head (25.8% standard length [SL]), elongated pelvic fins (35.7% SL), low number of vertebrae (44), and coloration (pinkish with a dorsal darker brownish hue and bright blotches along the dorsal-fin base). A species-delimitation analysis performed with available cytochrome c oxidase subunit 1 (COI) sequences affiliated to the genus Gaidropsarus additionally supported the validity of the new species. Video analyses showed a deep-water coral-associated and protection-seeking behavior, which may explain why the species has remained undescribed until now. Additional ROV footage from separate deep-water coral sites in the North Atlantic and Mediterranean Sea further highlights the ecological behavior and hidden diversity of bathyal three-bearded rocklings. Here, we additionally discuss the biogeographical distribution of all genetically verified Gaidropsarus spp. in combination with genetic data and morphological characters. G. mauritanicus sp. nov. is closely related to a species from Tasmania (43° S), a geographical point furthest among the studied samples, which may hint to an important influence of (paleo-) oceanography on the distributions of Gaidropsarus species.

OBJECTIVE: This study aims to investigate whether cumulative dose-dependent isotretinoin (Roaccutane®) could affect orthodontic tooth movement (OTM) and root resorption.
METHODS: Ninety male Wistar Albino rats were divided into 4 groups. While, the control (SALINE), solvent (SOYBEAN) and orthodontic drug (ISOTM) groups underwent orthodontic force, the non-orthodontic drug group (ISO) did not. The rats were administrated saline, soybean oil (SBO) and isotretinoin diluted in SBO (ISOTM, ISO) for 30 days, respectively. Six rats were euthanized in each orthodontic group. Fifty grams of orthodontic force was applied to the remaining rats\' first molars using the incisors as anchorage. Six more rats in each group were euthanized on the 7th, 14th and 21st days of the force application. In the ISO group, six rats were euthanized on the 37th, 44th and 51st days of administration. Six rats that were euthanized for ISOTM on the 30th day were also used for ISO to reduce the number of rats used. Micro-computed tomography (micro-CT) and histological analysis were performed.
RESULTS: Independent of orthodontic force, isotretinoin caused root resorption in the apical region. However, there was no statistically significant influence of isotretinoin on OTM and orthodontically induced root resorption (OIRR).
CONCLUSIONS: Despite the lack of strong evidence supporting the orthodontically induced resorptive effect of isotretinoin, this study provided findings regarding the resorptive effects of isotretinoin on non-orthodontic root resorption. Therefore, the present results underscore the importance of close monitoring during orthodontic treatment to mitigate potential root resorption in patients who use isotretinoin because of acne complaints.

OBJECTIVE: To date, no studies have exploited micro-CT in humans to evaluate bone morphology and structure after bone augmentation with CAD/CAM-customized titanium mesh, in mandible and maxilla. The aim of this study was to assess the composition and microstructure of bone biopsy through micro-CT analysis.
METHODS: Bone augmentation at both maxillary and mandible sites was performed on 30 patients randomly treated with customized mesh, either alone (M-) or covered with resorbable membrane (M+), in both cases filled 50:50 with autogenous bone and xenograft. After 6 months, biopsies were taken and micro-CT was performed on consecutive 1-mm-thick VOIs from coronal to apical side, measuring tissue volumes, trabecular thickness, spacing, and number.
RESULTS: In both groups, irrespective of membrane use, bone tissue (M-: 29.76% vs. M+: 30.84%) and residual graft material (M-: 14.87% vs. M+: 13.11%) values were similar. Differences were site-related (maxillary vs. mandibular) with higher percentage of bone tissue and trabecular density of low-mineralized bone and overall bone in the mandible.
CONCLUSIONS: The composition and structure of bone tissue, as assessed by micro-CT after alveolar ridge augmentation using CAD/CAM-customized titanium meshes, showed similar features regardless of whether a collagen membrane was applied.

This study evaluated the reliability of sealer penetration measurement methods used with confocal laser scanning microscopy in correlation with the percentage of residual root filling and examined the effect of residual root-filling material on dentine penetrability after retreatment. Extracted teeth were randomly divided into different groups according to the obturation sealer used (n = 6); BioRoot RCS; MTA Fillapex; Bio-C and AH Plus. Root-filling material was removed before the secondary chemo-mechanical preparation and obturation using fluorescein labelled AH Plus. Multiple micro-computed tomography scans were obtained followed by confocal laser scanning microscopy to measure the penetration of the labelled sealer into the dentinal tubules using four different methods. Measuring sealer penetration into radicular dentine using the penetration percentage method was found to be the most reliable. Dentine penetrability during retreatment did not seem to be affected by the type of residual root-filling material.

OBJECTIVE: To compare the effects of Cervical Access Cavity (CervAC) and Traditional Access Cavity (TradAC) on root canal preparation, root canal filling, and fracture resistance in mandibular incisors.
METHODS: Twenty recently extracted and intact mandibular incisors were initially scanned using a micro-CT device. The specimens were anatomically matched to create two groups (n = 10). A wedge-shaped non-carious cervical lesion (NCCL) was created on the buccal aspect of all teeth using a double-faced segmented diamond disc. In group 1, a TradAC was prepared, whilst in group 2, access was created through the simulated NCCL using a round diamond bur 1012. After root canal preparation with Rotate instruments sizes 15/0.04, 20/0.04, and 25/0.04, the teeth were scanned again and evaluated for root canal volume and surface area, static voxels, volume of removed dental tissue, and dentine thickness. After that, the root canals were filled using the single-cone technique, teeth were restored with composite resin, and subsequently rescanned to calculate the volume of filling materials and voids. Then, the restored teeth were subjected to fracture resistance tests using a universal testing machine. Statistical comparisons between groups were performed with the Mann-Whitney test or the Student\'s t-test, with a statistical significance level of 5%.
RESULTS: Statistical comparisons indicated no significant differences between groups in terms of root canal volume, surface area, static voxels, removed root dentine, root canal filling volume, percentage of voids, or fracture resistance load (p > .05). Conversely, teeth prepared with TradAC showed a significantly higher percentage of dental tissue removed from the crown (p = .001) and a greater volume of filling material remnants in the pulp chamber (p < .001) compared to the CervAC group. A significantly lower percentage reduction in dentine thickness was observed only on the mesial aspect of root at Level 1 in TradAC group (p = .008).
CONCLUSIONS: CervAC can be considered a viable alternative approach in the presence of NCCL in mandibular incisors.

暂无摘要。

This study aims to compare the shaping ability of three systems using micro-computed tomography (micro-CT). Moderately-curved mesial canals of 36 mandibular molars were assigned to three groups (n = 24); Protaper Next (PTN, 0.25, 0.06), WaveOne Gold (WOG, 0.25, 0.07), TruNatomy (TRN, 0.25, 0.04), and instrumentation was performed. Pre- and post-micro-CT scans were obtained. Canal volume and surface, structure model index (SMI), centroid shift, canal transportation, and untouched canal were analyzed. One-way ANOVA and Student\'s t-test were used for statistics. There was no difference in SMI, centroid shift, and centering ability between the study groups (p > .05). Removed dentin and canal surface changes were lower in TRN, while untouched dentin walls were higher (p < .05). Cross-sections became more rounded (p < .05), but not significant between groups (p > .05). Considering the removed dentin by TRN, it can be used in critical dentin thickness, such as the danger zone (DZ). PTN, WOG, and WOG kept the original canal course similarly. Untouched dentin by TRN (41%) was wider than PTN and WOG, consequently, meticulous irrigation is recommended. TRN, which provides a controlled increase in canal volume, can be used in thin dentin such as the DZ, however, its use should be supported by copious irrigation and brushing considering the rate of untouched dentin walls. RESEARCH HIGHLIGHTS: TRN presented a higher untouched dentin wall compared to PTN and WOG. Canal volume and surface changes were the lowest in the TRN group. The centering abilities were similar in PTN, WOG, and TRN.

BACKGROUND: Stifle osteoarthritis (OA) lesions are most common in the medial femorotibial (MFT) compartment. Their characterisation and mapping will inform equine veterinarians towards an accurate diagnosis of OA.
OBJECTIVE: Investigate and map micro-CT (μCT) changes in the hyaline articular cartilage (HAC) in the medial femoral condyle (MFC) and medial tibial plateau (MTP).
METHODS: Ex vivo cadaveric.
METHODS: Stifles (n = 7 OA and 17 control [CO]) were retrieved from a tissue bank. The MFC and MFT were imaged with μCT. Regions of interest (ROIs) were cranial (MFCcr; MTPcr) and caudal (MFCca; MTPca) sites. In each ROI, μCT images were scored for HAC fibrillation, surface mineralisation and for the presence of high-density mineralised protrusions (HDMP). The lesions were mapped, and site-matched histology was performed.
RESULTS: The microstructure of healthy and abnormal HAC was discernible on μCT images and confirmed with histology. HAC fibrillation was more prevalent (p = 0.019) in the MFCcr of the OA group (n = 7/7, 100%) when compared with the CO group (n = 7/17, 41%). Score 1 HAC surface mineralisation was more prevalent (p = 0.038) in the OA MFCca (n = 4/7, 57%) when compared with the CO group (n = 2/17, 12%). HDMP were heterogenous and hyperdense mineralised material protruding into the HAC and were more frequent (p = 0.033) in MFCs (n = 12/24, 50%) compared with MTPs (n = 5/24, 20%). Score 3 HDMPs were also more prevalent (p = 0.003) in the MFCcr (n = 7/24, 29%) compared with MFCca (n = 0/24, 0%) and in MFCs (n = 7/24, 29%) compared with MTPs (n = 3/24, 12.5%) (p = 0.046).
CONCLUSIONS: Clinical history was not available for all specimens.
CONCLUSIONS: Equine HDMP and HAC surface mineralisation are imaged for the first time in the MFT joint. HAC fibrillation and erosion and HDMP are more frequent in the cranial aspect of the MFC. μCT images of OA in equine stifle joints provide a novel perspective of lesions and improve understanding of OA.

This study assessed canal preparation effects on disinfection and dentin preservation. Thirty mandibular incisors were paired into two experimental groups (n = 10). Following contamination, the initial microbial sample was collected. Instruments 30/0.03 (Group 1) and 30/0.05 (Group 2) were employed and a second sample was obtained. Canals were enlarged using instruments 40/0.03 and 40/0.05, respectively, and a third sample was collected. Final irrigation was performed, and sample S4 obtained. A final scan evaluated volume, surface area, unprepared areas, removed dentin and dentin thickness. Data were analysed using Student t-test, Mann-Whitney, Kruskal-Wallis and Dunn tests. A significant difference was observed between S1 and other time points (p < 0.05). Comparison between groups showed no differences in bacterial loads and in the percentage of microbial reduction (p > 0.05). Group 2 exhibited greater reduction in dentin thickness than group 1 in the mesial aspect of the root (p < 0.05). Instrument 30/0.03 might provide effective disinfection and safety during mandibular incisors canal preparation.

The hemicultrine fishes are a group of small-sized cyprinids, widely distributed but endemic to East Asian rivers and lakes. Till now, the taxonomic boundaries and relationships within this group remain poorly explored. In the present study, we study the phylogeny of this group, providing suggestions for classification of the hemicultrine group. Using two mitochondrial and three nuclear genes, and samples representing all genera, our results showed that the group consists of seven major lineages, of which four (Hemiculterella, Hainania, Pseudolaubuca, and Anabarilius) were monophyletic and three (Hemiculter, Toxabramis, and Pseudohemiculter) were not. Based on the phylogenetic tree, we redefined the genera. We revive the genus Siniichthys, which has three species, Siniichthys bleekeri, Siniichthys lucidus, and S. varpachovskii, that were previously treated as members of the genus Hemiculter but showed distant relationships to the genus Hemiculter in our phylogenetic tree. With the new results, a diagnostic key for clades of the hemicultrine group is provided. Furthermore, we provide more detailed information on diagnostic features of the recently described species Hemiculter yungaoi (Vasil\'eva et al., 2022). This work will facilitate future systematic studies, pave the way for evolutionary studies, and provide valuable information for the urgent conservation of hemicultrine fishes.