Thromboembolism, a global leading cause of mortality, needs accurate risk assessment for effective prophylaxis and treatment. Current stratification methods fall short in predicting thrombotic events, emphasizing the need for a deeper understanding of clot properties. Fibrin clot permeability, a crucial parameter in hypercoagulable states, impacts clot structure and resistance to lysis. Current clot permeability measurement limitations propel the need for standardized methods. Prior findings underscore the importance of clot permeability in various thrombotic conditions but call for improvements and more precise, repeatable, and standardized methods. Addressing these challenges, our study presents an upgraded, portable, and cost-effective system for measuring blood clot permeability, which utilizes a pressure-based approach that adheres to Darcy\'s law. By enhancing precision and sensitivity in discerning clot characteristics, this innovation provides a valuable tool for assessing thrombotic risk and associated pathological conditions. In this paper, the authors present a device that is able to automatically perform the permeability measurements on plasma or fibrinogen in vitro-induced clots on specific holders (filters). The proposed device has been tailored to distinguish clot permeability, with high precision and sensitivity, between healthy subjects and high cardiovascular-risk patients. The precise measure of clot permeability represents an excellent indicator of thrombotic risk, thus allowing the clinician, also on the basis of other anamnestic and laboratory data, to attribute a risk score to the subject. The proposed instrument was characterized by performing permeability measurements in plasma and purified fibrinogen clots derived from 17 Behcet patients and 15 sex- and age-matched controls. As expected, our results clearly indicate a significant difference in plasma clot permeability in Behcet patients with respect to controls (0.0533 ± 0.0199 d vs. 0.0976 ± 0.0160 d, p < 0.001). This difference was confirmed in the patient\'s vs. control fibrin clots (0.0487 ± 0.0170 d vs. 0.1167 ± 0.0487 d, p < 0.001). In conclusion, our study demonstrates the feasibility, efficacy, portability, and cost-effectiveness of a novel device for measuring clot permeability, allowing healthcare providers to better stratify thrombotic risk and tailor interventions, thereby improving patient outcomes and reducing healthcare costs, which could significantly improve the management of thromboembolic diseases.

The single variable domains of camelid heavy-chain only antibodies, known as nanobodies, have taken a long journey since their discovery in 1989 until the first nanobody-based drug\'s entrance to the market in 2022. On account of their unique properties, nanobodies have been successfully used for diagnosis and therapy against various diseases or conditions. Although research on the application of recombinant antibodies has focused on human medicine, the development of nanobodies has paved the way for incorporating recombinant antibody production in favour of veterinary medicine. Currently, despite many efforts in developing these biomolecules with diversified applications, significant opportunities exist for exploiting these highly versatile and cost-effective antibodies in veterinary medicine. The present study attempts to identify existing gaps and shed light on paths for future research by presenting an updated review on camelid nanobodies with potential applications in veterinary medicine.

Low-cost and scalable technologies that allow people to measure microplastics in their local environment could facilitate a greater understanding of the global problem of marine microplastic pollution. A typical way to measure marine microplastic pollution involves imaging filtered seawater samples stained with a fluorescent dye to aid in the detection of microplastics. Although traditional fluorescence microscopy allows these particles to be manually counted and detected, this is a resource- and labour-intensive task. Here, we describe a novel, low-cost microscope for automated scanning and detection of microplastics in filtered seawater samples-the EnderScope. This microscope is based on the mechanics of a low-cost 3D printer (Creality Ender 3). The hotend of the printer is replaced with an optics module, allowing for the reliable and calibrated motion system of the 3D printer to be used for automated scanning over a large area (>20 × 20 cm). The EnderScope is capable of both reflected light and fluorescence imaging. In both configurations, we aimed to make the design as simple and cost-effective as possible, for example, by using low-cost LEDs for illumination and lighting gels as emission filters. We believe this tool is a cost-effective solution for microplastic measurement. This article is part of the Theo Murphy meeting issue \'Open, reproducible hardware for microscopy\'.

Extending the access to cardiopulmonary resuscitation (CPR) training to a wider public is an important step in increasing survivability of out-of-hospital cardiac arrest. However, often price and maintenance of CPR manikins are barriers that prevent training at schools. This study aims to evaluate the learning of hands-only (HO) CPR by practicing with a low-cost manikin (LoCoMan) with visual qualitative feedback and to compare the results with the skills acquired by practice on a conventional manikin. A quasi-experimental study with 193 schoolchildren (10 to 12 years old) who were allocated to two groups: the LoCoMan group was taught via an integrative approach (science combined with physical education (PE)) and practiced on a handmade manikin, and a control group practiced in a traditional setting with a commercial manikin (Resusci Junior, Laerdal, Norway). All participants practiced for 1 hands-on skill session before performing a post-test on an instrumented CPR manikin. The outcomes including HO-CPR performance variables were compared between groups. The LoCoMan and control groups both achieved acceptable percentage of HO-CPR quality (57% and 71%, p = 0.004). Among 6th-graders, there were no significant differences in HO-CPR quality between LoCoMan 68% and control 71%, p = 0.66. The control group achieved better chest compression depth while the LoCoMan group showed more compressions with adequate chest recoil.     Conclusion: Schoolchildren are able to build and use a low-cost manikin with visual feedback. The integrative learning approach used in this study may be a feasible alternative methodology for training and learning HO-CPR in schools when commercial manikins are not available. What is Known: • Access to CPR training should be universal and independent of age, location, financial means, or access to qualified instructors. • Scientific societies promote the implementation of CPR in schools, so that teachers and schoolchildren can play a multiplier role in their environment, but the gap in CPR learning is related to cultural, economic factors or access to resources and materials. What is New: • LoCoMan may be a useful device for teaching and learning CPR in schoolchildren from the age of 10 and upwards. • LOCOMAN shows that it is feasible and possible to build a low-cost manikin (about €5 in the European Region) and to integrate it into an integrative educational project, and outlines how this could be done. this approach can be an incentive for teachers to attempt teaching CPR, but also for education outside the formal environment.

BACKGROUND: Medical simulation is essential for surgical training yet is often too expensive and inaccessible in low- and middle-income countries (LMICs). Furthermore, in otolaryngology-head and neck surgery (OHNS), while simulation training is often focused on senior residents and specialists, there is a critical need to target general practitioners who carry a significant load of OHNS care in countries with limited OHNS providers. This scoping review aims to describe affordable, effective OHNS simulation models for early-stage trainees and non-OHNS specialists in resource-limited settings and discuss gaps in the literature.
METHODS: This scoping review followed the five stages of Arksey and O\'Malley\'s Scoping Review Methodology. Seven databases were used to search for articles. Included articles discussed physical models of the ear, nose, or throat described as \"low-cost,\" \"cost-effective,\" or defined as <$150 if explicitly stated; related to the management of common and emergent OHNS conditions; and geared towards undergraduate students, medical, dental, or nursing students, and/or early-level residents.
RESULTS: Of the 1706 studies screened, 17 met inclusion criteria. Most studies were conducted in HICs. Most models were low-fidelity (less anatomically realistic) models. The most common simulated skills were peritonsillar abscess aspiration and cricothyrotomy. Information on cost was limited, and locally sourced materials were infrequently mentioned. Simulations were evaluated using questionnaires and direct observation.
CONCLUSIONS: Low-cost simulation models can be beneficial for early medical trainees and students in LMICs, addressing resource constraints and improving skill acquisition. However, there is a notable lack of contextually relevant, locally developed, and cost-effective models. This study summarizes existing low-cost OHNS simulation models for early-stage trainees and highlights the need for additional locally sourced models. Further research is needed to assess the effectiveness and sustainability of these models.

Graphene is a promising material for thermoacoustic sources due to its extremely low heat capacity per unit area and high thermal conductivity. However, current graphene thermoacoustic devices have limited device area and relatively high cost, which limit their applications of daily use. Here, we adopt a dip-coating method to fabricate a large-scale and cost-effective graphene sound source. This sound source has the three-dimensional (3D) porous structure that can increase the contact area between graphene and air, thus assisting heat to release into the air. In this method, polyurethane (PU) is used as a support, and graphene nanoplates are attached onto the PU skeleton so that a highly flexible graphene foam (GrF) device is obtained. At a measuring distance of 1 mm, it can emit sound at up to 70 dB under the normalized input power of 1 W. Considering its unique porous structure, we establish a thermoacoustic analysis model to simulate the acoustic performance of GrF. Furthermore, the obtained GrF can be made up to 44 in. (100 cm × 50 cm) in size, and it has good flexibility and processability, which broadens the application fields of GrF loudspeakers. It can be attached to the surfaces of objects with different shapes, making it suitable to be used as a large-area speaker in automobiles, houses, and other application scenarios, such as neck mounted speaker. In addition, it can also be widely used as a fully flexible in-ear earphone.

Ultrasound-guided vascular access is a medical procedure that is becoming increasingly common in daily practice and is recommended to avoid iatrogenic complications. One of the procedures with a high-risk rate of complications is the vascular puncture. However, training on this technique can be challenging due to the limited availability of simulation models. We propose a simple, cost-effective, and effective ultrasound-guided vascular access simulation model that utilizes chicken breast and a urine catheter to address this need.

In this paper are presented a Proof of Concept (POC) architectures of a cost-effective system for COVID-19 patient monitoring. While the hardware used by the system remains the same, two different approaches are shown and compared. This gives freedom and flexibility to hospitals and/or healthcare practitioners to choose with budget and available IT support in mind.

The development of innovative methods for highly efficient production of recombinant proteins remains a prominent focus of research in the biotechnology field, primarily due to the fact that current commercial protein expression systems rely on expensive chemical inducers, such as isopropyl β-D-thiogalactoside (IPTG). In our study, we designed a novel approach for protein expression by creating a plasmid that responds to copper. This specialized plasmid was engineered through the fusion of a copper-sensing element with an optimized multiple cloning site (MCS) sequence. This MCS sequence can be easily customized by inserting the coding sequences of target recombinant proteins. Once the plasmid was generated, it was introduced into an engineered Escherichia coli strain lacking copA and cueO. With this modified E. coli strain, we demonstrated that the presence of copper ions can efficiently trigger the induction of recombinant protein expression, resulting in the production of active proteins. Most importantly, this expression system can directly utilize copper-containing industrial wastewater as an inducer for protein expression while simultaneously removing copper from the wastewater. Thus, this study provides a low-cost and eco-friendly strategy for the large-scale recombinant protein production. To the best of our knowledge, this is the first report on the induction of recombinant proteins using industrial wastewater.

Redox flow batteries (RFBs) are membrane-separated rechargeable flow cells with redox electrolytes, offering the potential for large-scale energy storage and supporting renewable energy grids. Yet, creating a cost-effective, high-performance RFB system is challenging. In this work, we investigate an Fe/Mn RFB alkaline system based on the [(TEA)Fe-O-Fe(TEA)]3-/4- and MnO4-/2- redox couples with a theoretical cell voltage of ∼1.43 V. This combination has not been systematically studied previously, but it can lead to a very low-cost and sustainable materials for high energy storage. Constant current cycling tests were performed at ±41 mA cm-2 between 20% and 80% SOC over 800 h (400 cycles) with an apparent Coulombic efficiency (CE) approaching 100%, while the voltage efficiency (VE) gradually decreased from ∼75.3% to ∼61.4% due to increasing internal resistances. The voltage efficiency loss can be mitigated through a periodic acid treatment to remove MnO2 deposits from the separator.