OBJECTIVE: This study aimed to design a modified passive-deflation sealer injection needle and investigate its ability to improve obturation quality of single-cone technique through assessing the distribution of voids in root canals using micro-computed tomography (micro-CT).
METHODS: Forty-eight mandibular incisors were divided into eight groups (n = 6), according to the taper of root canal preparation (0.06 or 0.04), the needle used for sealer injection (modified or commercial iRoot SP injection needle), and the obturation method (iRoot SP sealer-only or single-cone obturation). After obturation, each specimen was scanned by micro-CT. The volumetric percentage and distribution of all voids were first analyzed and compared among groups, then the open and closed voids were separately analyzed and compared among single-cone obturation groups.
RESULTS: Compared to commercial needle groups, modified needle groups showed much less voids, especially in the apical root canal part (P < 0.05). Besides, the modified needle groups produced much less open voids than commercial needle groups despite the root canal taper (P < 0.05).
CONCLUSIONS: The modified passive deflation sealer injection needle could effectively improve the quality of single-cone obturation through reducing intra-canal voids, especially open voids throughout the root canal, thus might possibly be developed as an effective intra-canal sealer delivering instrument.

The aim of the study was to evaluate the ability of a modified passive deflation needle to reduce the apical voids during the intra-canal iRoot SP sealer injection. A modified passive deflation injection needle was designed. Forty 20°-curved and twenty S-shaped single-canal resin block models were allocated into six groups. Each group was mechanically prepared to #25/04 or #25/06 file; then the root canals were injected with iRoot SP sealer using a modified needle or a normal plastic needle. Radiographs were taken to measure the length of apical void in each specimen. Similarly, twenty single-canal extracted premolars were collected and randomly divided into four groups. Each group was prepared to #25/04 or #25/06 file; then the root canals were injected with iRoot SP sealer using a modified needle or a normal plastic needle. Roots were then scanned using micro-computed tomography (micro-CT), and the volume of voids in root canals was analyzed and compared among groups. Statistical analysis demonstrated that the length and the volumetric percentage of voids were much lower in the modified needle group in both resin block root canal models and extract teeth than the normal plastic needle group (P < 0.05). The modified passive deflation needle can efficiently reduce apical voids during the intra-canal iRoot SP sealer injection.

OBJECTIVE: To compare calcium silicate-based endodontic sealer and epoxy resin-based sealer remnants on root canal walls after post space preparation and their influence on the bond strength of fibre posts fixed with a dual-cured resin cement.
METHODS: Thirty-six extracted single-root mandibular premolars were instrumented and divided randomly into two equal groups with different endodontic sealers. iRoot SP (Innovative BioCeramix, Vancouver, Canada) was employed in the experimental group and AH Plus (Dentsply Sirona, Charlotte, NC, USA) was used in the control group. Sealer remnants were observed under an endodontic microscope after root canal therapy and post space preparation. Fibre posts were fixed with dual-cured resin cement. Specimens were taken at each third of the post space. The push-out bond strength was measured using a universal testing machine and fracture modes were assessed. Statistical analysis was performed using an independent samples t test and one-way analysis of variance.
RESULTS: There was no statistically significant difference in bond strength of fibre posts between the control and experimental group (P > 0.05); however, sealer remnants were observed in 38.9% of the samples treated with iRoot SP and none of the samples treated with AH Plus. The major fracture mode in samples treated with iRoot SP was adhesive failure between the resin cement and the post, and no adhesive failure between the resin cement and dentine occurred at the site of the sealer remnant. The presence of iRoot SP remnants on the root canal walls after post space preparation did not interfere with bonding.
CONCLUSIONS: iRoot SP is a viable option for root canal obturation before fibre post cementation.

UNASSIGNED: The purpose of this study was to assess the push-out bond strength of calcium-silicate and silicone based root canal sealers in bulk and with main cone.
UNASSIGNED: Roots (n=48) randomly divided into 4 groups (n=12) according to the obturation protocol; (1) iRoot SP in bulk; (2) iRoot SP with gutta-percha; (3) GuttaFlow Bioseal in bulk; (4) GuttaFlow Bioseal with gutta-percha. Six horizontal sections were obtained from each root (n=72). Effect of sealers on bond strength was statistically significant (P<0.05).
UNASSIGNED: Highest mean value was obtained in iRoot-Bulk group and lowest in GuttaFlow Bioseal-GP group. Both iRoot SP groups had significantly higher bond strength values than both GuttaFlow Bioseal groups (P<0.05). There was no significant difference between iRoot-GP and iRoot-Bulk groups (P=0.603) also GuttaFlow Bioseal-GP and GuttaFlow Bioseal-Bulk groups (P=0.684).
UNASSIGNED: Based on findings, using calcium silicate-based sealer in bulk can be also suitable in clinical practice.

OBJECTIVE: The premixed bioceramic sealer iRoot SP that is widely used clinically has been reported to kill bacterial biofilms and promote osteogenic differentiation of human stem cells from the apical papilla (hSCAPs). Although miR-141-3p has been substantiated to be involved in the osteogenic process, the underlying mechanisms remain unclear. The aim of this study was to investigate the role of miR-141-3p in osteogenic differentiation and underlying mechanisms of iRoot SP-treated hSCAPs.
METHODS: hSCAPs were extracted from tissue blocks with enzyme digestion and identified by using immunofluorescence, flow cytometry and alizarin red staining. The mRNA expression level of miR-141-3p in hSCPAs after culture with iRoot SP was examined by quantitative real-time PCR (qRT-PCR) assay. SPAG9 was identified as a downstream target gene of miR-141-3p by dual-luciferase report assay. Alkaline phosphatase (ALP) staining and activity detection, alizarin red staining, calcium concentration assay, qRT-PCR and western blot were used to estimate osteogenic differentiation ability and involved protein expression levels of the osteogenic makers and signalling pathway-related factors in iRoot SP-treated hSCAPs. Data were analysed by one-way anova and post hoc Tukey\'s test to determine any statistical differences between the experimental groups and the control group. p < .05 was considered statistically significant.
RESULTS: Expression of miR-141-3p was reduced in iRoot SP-treated hSCAPs with the increased exposure time up to 7 days, and the western blot and qRT-PCR results revealed that the osteogenic markers osteocalcin (OCN), osterix (OSX), runt-related transcription factor 2 (RUNX2) and dentin sialophosphoprotein (DSPP) were inversely correlated with miR-141-3p. The negative regulatory relationship between miR-141-3p and SPAG9/ mitogen-activated protein kinases (MAPK) signalling axis was validated in this in vitro experiments.
CONCLUSIONS: The bioceramic sealer iRoot SP promoted osteogenic differentiation of hSCAPs by inhibiting miR-141-3p following down-regulated SPAG9 expression, and activated MAPK pathway. These findings proposed a novel therapeutic impact of bioceramic sealer iRoot SP inducing bone regeneration in refractory periapical periodontitis.

This study aimed to compare the effect of a bioceramic sealer (iRoot SP) and a resin-based sealer (AH Plus) on the outcome of root canal treatment in a 2-year follow-up. Seventy-six teeth with irreversibly or necrotic pulp were recruited. After instrumentation and disinfection, the root canals were obturated using warm vertical compaction with iRoot SP (n = 43) or AH Plus (n = 33). Patients were followed up by clinical and radiographic examination at 6 12 and 24 months with recall rates of 84.2%, 65.8% and 48.7%, respectively. During each recall session, the success rates were 80%, 85.2% and 85% in the iRoot SP group and 82.8%, 91.3% and 88.2% in the AH Plus group. The success rates of the two groups did not differ significantly (p > 0.05). The bioceramic sealer resulted in a similar clinical performance and success rate to the resin-based sealer in endodontic treatment during a 2-year follow-up.

OBJECTIVE: The present study evaluated the efficacy of three different supplementary cleaning protocols on the removal of bioceramic-based root canal filling materials from oval-shaped canals.
METHODS: A total of 36 human mandibular premolars were instrumented and obturated with gutta-percha and iRoot SP using the single-cone technique. Retreatment was performed with ProTaper Universal retreatment files. The samples were randomly divided into the following supplementary cleaning protocols: conventional syringe irrigation (CSI), passive ultrasonic irrigation (PUI), and XP-endo Finisher R (XPR). The samples underwent micro-CT scanning to quantify the amount of residual filling materials after retreatment and after performing the cleaning protocols. The volume of filling material removal was analyzed by one-way analysis of variance and post hoc Bonferroni and Games-Howell tests (P < 0.05).
RESULTS: There were significant differences in the amount of root canal filling material removal in every comparison group (P < 0.05). The XPR removed significantly more residual filling materials (P < 0.01) followed by PUI and CSI (P < 0.05). Similar efficacy was found in the total root canal and all root thirds.
CONCLUSIONS: The additional use of XP-endo Finisher R and passive ultrasonic irrigation effectively removed the bioceramic-obturated root filling materials from the oval-shaped canals. However, none of the techniques completely removed the filling materials.
CONCLUSIONS: The XP-endo Finisher R and passive ultrasonic irrigation exhibited greater efficacy compared with syringe irrigation in the reduction of residual filling materials after retreatment in root-filled teeth with a bioceramic sealer.

Research shows that nano-bioceramics can modulate the differentiation of dental stem cells. The novel ready-to-use calcium-silicate-based root-canal sealer iRoot SP is widely used in root filling. Accordingly, the aim of this study was to evaluate the effects of iRoot SP on proliferation and osteogenic differentiation in human stem cells from the apical papilla (hSCAPs).
hSCAPs were isolated and characterized in vitro, then cultured with various concentrations of iRoot SP extract. Cell proliferation was assessed by CCK-8 assay, and scratch-wound-healing assays were performed to evaluate cell-migration capacity. hSCAPs were then cultured in osteogenic medium supplemented with iRoot SP extracts. Alkaline phosphatase (ALP) activity assay was used to evaluate ALP enzyme levels. Alizarin red staining and cetylpyridinium chloride (CPC) assays were performed to assess calcified-nodule formation and matrix-calcium accumulation of hSCAPs. The mRNA and protein expression levels of the osteogenic markers OCN, OSX, Runx2, and DSPP were determined by qRT-PCR and Western blotting. The data were analyzed using one-way ANOVA and LSD-t tests.
iRoot SP at low concentrations (2, 0.2, and 0.02 mg/mL) is nontoxic to hSCAPs. iRoot SP at concentrations of 0.02 and 0.2 mg/mL significantly increases cell-migration capacity. In terms of osteogenic differentiation, 0.2 mg/mL iRoot SP promotes intracellular ALP activity and the formation of mineralized nodules. Moreover, the expression of osteogenic markers at the mRNA and protein levels are upregulated by iRoot SP.
iRoot SP is an effective filling material for periapical bone regeneration.

Tricalcium silicate-based sealers have been usually indicated for the single-cone technique and result in more residual filling materials in root canal retreatment. Passive ultrasonic irrigation and photon-initiated photoacoustic streaming have been reported to improve the removal efficacy of root canal filling materials. However, the abilities of both techniques combined with NiTi re-instrumentation to remove residual tricalcium silicate-based sealer and gutta-percha have not been compared. The aim of this study was to evaluate the efficacy of laser-activated and ultrasonic-activated techniques in vitro for the removal of the tricalcium silicate-based sealer iRoot SP and gutta-percha after standard canal retreatment procedures with the use of nickel-titanium (NiTi) rotary instruments.

OBJECTIVE: To evaluate the effect of different endodontic sealers (epoxy resin-based and bioceramic-based) and the time of post-cementation on the bond strength of a fiber post cemented with resin cement.
METHODS: Forty human premolars were instrumented and divided into 4 groups. According to the type of sealer and the time of post-cementation: AH-IM (AH Plus, post-cemented immediately after root canal treatment), SP-IM (iRoot SP, post-cemented immediately after root canal treatment), AH-OW (AH Plus, post-cementation after one week), and SP-OW (iRoot SP, post-cementation after one week). In each group, the samples were submitted to push-out test, and failure mode was assessed. Levene\'s test, one-way ANOVA, and Kruskal-Wallis analysis were applied for statistical analysis (α = 5%).
RESULTS: The highest mean push-out bond strength was obtained from the SP-IM group in the apical part (10.45 ± 5.15MPa), while the lowest was observed in samples from the AH-OW group in the middle part (2.63 ± 1.54 MPa). One-way ANOVA showed that within the same root region, the time of post-cementation had a negative influence on the bonding strength in the SP groups in the middle and apical portion (P<0.05), however, when comparing the effect of type of sealers on bonding strength between the OW groups or IM groups within the same root region, no significant difference was observed regardless of the post cementation time (P>0.05).
CONCLUSIONS: The bond strength of the fiber post was higher when the post was cemented immediately after root canal treatment when the bioceramic sealer was applied.
CONCLUSIONS: The correct choice of an endodontic sealer and the proper time of post-cementation may help to obtain the best quality of post-and-core restoration.