Currently, multifunction has become an essential direction of personal protective equipment (PPE), but achieving the protective effect, flexibility, physiological comfort, and intelligent application of PPE simultaneously is still a challenge. Herein, inspired by the meso-structure of rhinoceros skin, a novel strategy is proposed by compounding an ammonium sulfate ((NH4)2SO4) solution soaked gelatin hydrogel with the high weight fraction and vertically interwoven Kevlar fibers to manufacture a flexible and wearable composite with enhanced puncture resistance and strain-sensing properties. After (NH4)2SO4 solution immersion, the hydrogel\'s tensile strength, toughness, and fracture strain were up to 3.77 MPa, 4.26 MJ/m3, and 305.19%, respectively, indicating superior mechanical properties. The Kevlar/hydrogel composites revealed excellent puncture resistance (quasi-static of 132.06 N and dynamic of 295.05 N), flexibility (138.13 mN/cm), and air and moisture permeability (17.83 mm/s and 2092.73 g m-2 day-1), demonstrating a favorable balance between the protective effect and wearing comfort even after 7 days of environmental exposure. Meanwhile, salt solution immersion endowed the composite with excellent strain-sensing properties at various bending angles (30-90°) and frequencies (0.25-1 Hz) and allowed it to monitor different human motions directly in real-time. The rhinoceros-skin-inspired Kevlar/hydrogel composites provide a simple and economical solution for antipuncture materials that combine high protective effects, a comfortable wearing experience, and good strain-sensing properties, promising multifunctional PPE in the future.

The paper presents the results of testing the properties of wood-polymer composites (WPC) based on plasticised poly(vinyl chloride) (PVC-P). Materials with variable contents of wood filler (Arbocel C 320) or plasticiser (di-isononyl phthalate) were produced and then analysed. The share of wood flour in the material was up to 50 phr, and the plasticiser content was up to 40 phr. Functional properties, such as tensile properties, mechanical properties at variable temperature (DMTA), and water absorption, as well as processing properties such as rheological properties and analysis of the fusion process, were analysed. The influences of wood flour and plasticiser on the composites\' properties in the solid and melted state were found. For example, with 40 phr of plasticiser, increasing the filler share from 0 phr to 50 phr resulted in an increased tensile modulus from 18 MPa to 274 MPa and viscosity at a share rate of 20 s-1, from 721 Pa·s to 1581 Pa·s. However, increasing the share of plasticiser from 20 phr to 40 phr with 30 phr of filler reduces the value of these properties from 1760 MPa to 112 MPa and from 2768 Pa·s to 1151 Pa·s, respectively. It was also found that increasing the share of wood flour in the composite noticeably reduces the effectiveness of the plasticiser.

Flexible capacitive pressure sensors based on ionic hydrogels (IHs) have garnered significant attention in the field of wearable technology. However, the vulnerability of traditional single-network hydrogels to mechanical damage and the complexity associated with preparing double-network hydrogels present challenges in developing a highly sensitive, easily prepared, and durable IH-based flexible capacitive pressure sensor. This study introduces a novel multicross-linked dual-network IH achieved through the physical and chemical cross-linking of polymers polyvinyl alcohol (PVA) and chitosan (CS), ionic solution H3PO4, and cross-linking agent gum arabic. Flexible capacitive pressure sensors, characterized by high sensitivity and a broad pressure range, are fabricated by employing mesh as templates to design cut-corner cube microstructures with high uniformity and controllability on the IHs. The sensor exhibits high sensitivity across a wide pressure range (0-290 kPa) and with excellent features such as high resolution (∼1.3 Pa), fast response-recovery time (∼11 ms), and repeatable compression stability at 25 kPa (>2000 cycles). The IHs as a dielectric layer demonstrate long-term water retention properties, enabling exposure to air for up to 100 days. Additionally, the developed sensor shows the ability to accurately measure the pulse wave within the small pressure range. By combining the pulse wave acquired by the sensor with a trained neural network model, we achieve successful blood pressure (BP) prediction, meeting the standards set by the Association for the Advancement of Medical Instrumentation and the British Hypertension Society. Ultimately, the sensor proposed in this study holds promising prospects for broad applications in high-precision wearable medical electronic devices.

Nature with its abundant source offers numerous inspirations for structural and engineering designs. The oriented membranes stacked with bouligand structures in the fish scales show an outstanding combination of high strength and crack resistance. Although the applications of hard biomimetic composites are reported, the structures are rarely utilized in soft materials. Inspired by the scales of various fishes, electrospun membranes are used and stacked to fabricate bouligand elastomers, including orthogonal-plywood, single-bouligand, and double-bouligand structures. The effects of different structures on the properties of elastomers are systematically investigated and possible mechanism is explained using finite element analysis (FEA). The stiffness and fatigue characteristics of these biomimetic elastomers with the above structures are improved compared with the original membranes, especially the elastomers with a single-bouligand structure, which can undergo 5 000 cycles at a maximum strain of 35% without complete failure. The crack only propagates to half of the width of the elastomer with remaining strength of 50% of its original strength. Moreover, the mechanical performance can be adjusted by regulating the proportion of the components. The excellent crack-resistant properties and transparency promote its various potential applications.

The growing interest in piezoresistive sensors has favored the development of numerous approaches and materials for their fabrication. Within this framework, carbon nanotubes (CNTs) are often employed. However, CNTs are a heterogeneous material with different morphological characteristics in terms of length and diameter, and, so far, experimental studies have not usually considered the effect of these parameters on the final sensor performances. Here, we observe how, by simply changing the CNTs length in a solvent-free mechanochemistry fabrication method, different porous 3D elastomeric nanocomposites with different electrical and mechanical properties can be obtained. In particular, the use of longer carbon nanotubes allows the synthesis of porous nanocomposites with better mechanical stability and conductivity, and with a nine-times-lower limit of detection (namely 0.2 Pa) when used as a piezoresistive sensor. Moreover, the material prepared with longer carbon nanotubes evidenced a faster recovery of its shape and electrical properties during press/release cycles, thus allowing faster response at different pressures. These results provide evidence as to how CNTs length can be a key aspect in obtaining piezoresistive sensors with better properties.

Epoxy-based nanocomposites can be ideal electromagnetic interference (EMI)-shielding materials owing to their lightness, chemical inertness, and mechanical durability. However, poor conductivity and brittleness of the epoxy resin are challenges for fast-growing portable and flexible EMI-shielding applications, such as smart wristband, medical cloth, aerospace, and military equipment. In this study, we explored hybrid nanofillers of single-walled carbon nanotubes (SWCNT)/reduced graphene oxide (rGO) as conductive inks and polyester fabrics (PFs) as a substrate for flexible EMI-shielding composites. The highest electrical conductivity and fracture toughness of the SWCNT/rGO/PF/epoxy composites were 30.2 S m-1 and 38.5 MPa m1/2, which are ~ 270 and 65% enhancement over those of the composites without SWCNTs, respectively. Excellent mechanical durability was demonstrated by stable electrical conductivity retention during 1000 cycles of bending test. An EMI-shielding effectiveness of ~ 41 dB in the X-band frequency of 8.2-12.4 GHz with a thickness of 0.6 mm was obtained with an EM absorption-dominant behavior over a 0.7 absorption coefficient. These results are attributed to the hierarchical architecture of the macroscale PF skeleton and nanoscale SWCNT/rGO networks, leading to superior EMI-shielding performance. We believe that this approach provides highly flexible and robust EMI-shielding composites for next-generation wearable electronic devices.

Fish scales serve as a natural dermal armor with remarkable flexibility and puncture resistance. Through studying fish scales, researchers can replicate these properties and tune them by adjusting their design parameters to create biomimetic scales. Overlapping scales, as seen in elasmoid scales, can lead to complex interactions between each scale. These interactions are able to maintain the stiffness of the fish\'s structure with improved flexibility. Hence, it is important to understand these interactions in order to design biomimetic fish scales. Modeling the flexibility of fish scales, when subject to shear loading across a substrate, requires accounting for nonlinear relations. Current studies focus on characterizing these kinematic linear and nonlinear regions but fall short in modeling the kinematic phase shift. Here, we propose an approach that will predict when the linear-to-nonlinear transition will occur, allowing for more control of the overall behavior of the fish scale structure. Using a geometric analysis of the interacting scales, we can model the flexibility at the transition point where the scales start to engage in a nonlinear manner. The validity of these geometric predictions is investigated through finite element analysis. This investigation will allow for efficient optimization of scale-like designs and can be applied to various applications.

Magnetostrictive materials have a wide variety of applications due to their great capability as sensors and energy-harvesting devices. However, their brittleness inhibits their applications as magnetostrictive devices. Recently, we developed a continuous magnetostrictive Fe-Co-fiber-embedded epoxy matrix composite to increase the flexibility of the material. In this study, we fabricated random magnetostrictive Fe-Co short fiber/epoxy composite sheets. It was found that the discontinuous Fe-Co fiber composite sheet has the magnetostrictive properties along the orientation parallel to the length of the sheet. Finite element computations were also carried out using a coupled magneto-mechanical model, for the representative volume element (RVE) of unidirectional aligned magnetostrictive short fiber composites. A simple model of two-dimensional, randomly oriented, magnetostrictive short fiber composites was then proposed and the effective piezomagnetic coefficient was determined. It was shown that the present model is very accurate yet relatively simple to predict the piezomagnetic coefficient of magnetostrictive short fiber composites. This magnetostrictive composite sheet is expected to be used as a flexible smart material.

The construction of flexible electrochemical devices for energy storage and generation is of utmost importance in modern society. In this article, we report on the synthesis of flexible MoS2-based composite paper by high-energy shear force milling and simple vacuum filtration. This composite material combines high flexibility, mechanical strength and good chemical stability. Chronopotentiometric charge-discharge measurements were used to determine the capacitance of our paper material. The highest capacitance achieved was 33 mF·cm-2 at a current density of 1 mA·cm-2, demonstrating potential application in supercapacitors. We further used the material as a cathode for the hydrogen evolution reaction (HER) with an onset potential of approximately -0.2 V vs RHE. The onset potential was even lower (approximately -0.1 V vs RHE) after treatment with n-butyllithium, suggesting the introduction of new active sites. Finally, a potential use in lithium ion batteries (LIB) was examined. Our material can be used directly without any binder, additive carbon or copper current collector and delivers specific capacity of 740 mA·h·g-1 at a current density of 0.1 A·g-1. After 40 cycles at this current density the material still reached a capacity retention of 91%. Our findings show that this composite material could find application in electrochemical energy storage and generation devices where high flexibility and mechanical strength are desired.

Herein is presented the preparation and characterization of a composite material obtained by the combination of nanosheets of a coordination polymer (CP) based on the copper(I)-I double chain with response to temperature and pressure with polylactic acid (PLA) as biodegradable organic matrix. The new films of composite materials are generated using a simple and low-cost method and can be created with long lateral dimensions and thicknesses ranging from a few microns to a few nanometers. Studies show that the new material maintains the optical response versus the temperature, while the elasticity and flexibility of the PLA totally quenches the response to pressure previously observed for the CP. This new material can act as a reversible sensor at low temperatures, thanks to the flexibility of the copper(I)-iodine chain that conforms the CP. The addition of CP to the PLA matrix reduces the elastic modulus and ultimate elongation of the organic matrix, although it does not reduce its tensile strength.