Controlling the thickness and uniformity of biomaterial films is crucial for their application in various fields including sensing and bioelectronics. In this work, we investigated film assemblies of an engineered repeat protein─specifically, the consensus tetratricopeptide repeat (CTPR) protein ─a system with unique robustness and tunability. We propose the use of microreflectance spectroscopy and apparent color inspection for the quick assessment of the thickness and uniformity of protein-based biomaterial films deposited on oxidized silicon substrates. Initially, we characterized the thickness of large, uniform, spin-coated protein films and compared the values obtained from microreflectance spectroscopy with those obtained from other typical methods, such as ellipsometry and atomic force microscopy. The excellent agreement between the results obtained from the different techniques validates the effectiveness of microreflectance as a fast, noninvasive, and affordable technique for determining the thickness of biomaterial films. Subsequently, we applied microreflectance spectroscopy to determine the thickness of drop-casted CTPR-based films prepared from small protein solution volumes, which present a smaller surface area and are less uniform compared to spin-coated samples. Additionally, we demonstrate the utility of apparent color inspection as a tool for assessing film uniformity. Finally, based on these results, we provide a calibration of film thickness as a function of the protein length and concentration for both spin-coated and drop-casted films, serving as a guide for the preparation of CTPR films with a specific thickness. Our results demonstrate the remarkable reproducibility of the CTPR film assembly, enabling the simple preparation of biomaterial films with precise thickness.

This study aimed to assess the adaptability and penetration depth capacity of recent bioceramic systems, including regular EndoSequence (BC) versus HiFlow (BCH) sealers in the presence of BC points. A total of 54 single-rooted teeth were instrumented and obturated with either the cold or warm compaction technique (n = 9), using either BC, BCH, or AH Plus (AHP) combined with BC points. The adaptation, film thickness, and gaps/voids were evaluated by scanning electron microscopy. The sealer/dentin interface was evaluated by Raman spectroscopy, and depth penetration was evaluated by a confocal laser scanning microscope. According to the normality test, the data were statistically analyzed by ANOVA or Kruskal-Wallis and Mann-Whitney U tests at p < 0.05. BCH sealer showed the significantly thinnest film with the greatest flow (p > 0.001), with further improvement when subjected to the warm compaction technique. Moreover, it exhibited close adaptation with deep penetration into radicular dentin, forming a tag-like structure. The Raman spectra also indicated close contact with the dentin surface. The use of BC sealer with BC points exhibited homogenous, single-unit obturation, either with a cold or warm technique. Furthermore, the use of the warm compaction technique with BCH sealer achieved a gap-free interface associated with tag-like structures, which exhibit the monoblock phenomenon.

Changing film thickness to manipulate microstructural properties has been considered as a potential method in practical application. Here, we report that atomic-scale structural properties are regulated by film thickness in an NiCO2O4(NCO)/CuFe2O4(CFO) bilayer heterostructure prepared on (001)-MgAl2O4 (MAO) substrate by means of aberration-corrected scanning transmission electron microscopy (STEM). The misfit dislocations at the NCO/CFO interface and antiphase boundaries (APBs) bound to dislocations within the films are both found in NCO (40 nm)/CFO (40 nm)/MAO heterostructures, contributing to the relaxation of mismatch lattice strain. In addition, the non-overlapping a/4[101]-APB is found and the structural transformation of this kind of APB is resolved at the atomic scale. In contrast, only the interfacial dislocations form at the interface without the formation of APBs within the films in NCO (10 nm)/CFO (40 nm)/MAO heterostructures. Our results provide evidence that the formation of microstructural defects can be regulated by changing film thickness to tune the magnetic properties of epitaxial bilayer spinel oxide films.

BACKGROUND: The aim of this study was to evaluate the physicochemical properties of two newly introduced premixed calcium silicate-based root canal sealers (AH Plus Bioceramic Sealer and Bio-C Sealer) compared to a resin-based root canal sealer (ADseal root canal sealer).
METHODS: Solubility, pH analysis, calcium ion release, and film thickness of each sealer were evaluated following ISO guidelines. The data were examined using the two-way ANOVA test. Furthermore, X-ray diffraction (XRD) examination was performed to investigate the crystalline phase of each type of sealer. X-ray fluorescence (XRF) analysis was done for the chemical elemental analysis of each sealer.
RESULTS: The least film thickness, highest alkalinity, and highest calcium ion release were all displayed by AH Plus Bioceramic Sealer. High solubility, high alkalinity, intermediate calcium ion release, and intermediate film thickness were all displayed by Bio-C Sealer. While ADseal root canal sealer displayed the greatest film thickness, least solubility, alkalinity, and calcium ion release.
CONCLUSIONS: Both AH Plus Bioceramic Sealer and Bio-C Sealer represented adequate properties to be considered a good sealer that could be used as a potential alternative to resin-based root canal sealers.

The evolution of organic semiconductors for organic photovoltaics (OPVs) has resulted in unforeseen outcomes. This has provided substitute choices of photoactive layer materials, which effectively convert sunlight into electricity. Recently developed OPV materials have narrowed down the gaps in efficiency, stability, and cost in devices. Records now show power conversion efficiency in single-junction devices closing to 20%. Despite this, there is still a gap between the currently developed OPV materials and those that meet the requirements of practical applications, especially the solution processability issue widely concerned in the field of OPVs. Based on the general rule that structure determines properties, methodologies to enhance the processability of OPV materials are reviewed and explored from the perspective of material design and views on the further development of processable OPV materials are presented. Considering the current dilemma that the existing evaluation indicators cannot reflect the industrial processability of OPV materials, a more complete set of key performance indicators are proposed for their processability considerations. The purpose of this perspective is to raise awareness of the boundary conditions that exist in industrial OPV manufacturing and to provide guidance for academic research that aspires to contribute to technological advancements.

Two-dimensional (2D) PdSe2film has the characteristics of adjustable bandgap, high carrier mobility, and high stability. Photodetector (PD) based on 2D PdSe2exhibits wide spectral self-driving features, demonstrating enormous potential in the field of optical detection. Here, we design and fabricate PdSe2/Si heterojunction PDs with various thicknesses of the PdSe2films from 10 to 35 nm. Due to the enhancement of light absorption capacity and built-in electric field of heterojunction, the photodetector with thicker PdSe2film can generate more photo-generated carriers and effectively separate them to form a large photocurrent, thus showing more excellent photodetection performance. The responsivity and specific detectivity of the PdSe2/Si PDs with 10 nm, 20 nm, and 35 nm PdSe2films are 2.12 A W-1and 6.72 × 109Jones, 6.17 A W-1and 1.95 × 1010Jones, and 8.02 A W-1and 2.54 × 1010Jones, respectively (808 nm illumination). The PD with 35 nm PdSe2film exhibits better performance than the other two PDs, with the rise/fall times of 15.8μs/138.9μs atf= 1 kHz and the cut-off frequency of 8.6 kHz. Furthermore, we demonstrate that the properties of PdSe2/Si PD array have excellent uniformity and stability at room temperature and shows potential for image sensing in the UV-vis-NIR wavelength range.

The optical behavior of devices based on thin films is determined by complex refractive index and thickness of each slab composing the stack; these important parameters are usually evaluated from photometric and/or ellipsometric spectral measurements, given a model of the stack, by means of dedicated software. In the case of complex multilayer devices, generally a number of simpler specimens (like single-film on substrate) must be preliminarily characterized. This paper introduces the reader to a new open source software for thin film characterization finally released after about 30 years of development. The software has already been used in various fields of physics, such as thin film optical filters, architectural glazing, detectors for high energy physics, solar energy, and, last but not least, photovoltaic devices. Code source files, MS Windows executable, user manual as well as a sample of working directories populated with assorted files can be freely downloaded from the kSEMAW GitHub repository.

This study aimed to determine the reinforcing effect of two weight ratios of Gum Arabic (GA) natural biopolymer, i.e., 0.5% and 1.0% in the powdered composition of glass ionomer luting cement. GA powder was oxidized and GA-reinforced GIC in 0.5 and 1.0 wt.% formulations were prepared in rectangular bars using two commercially available GIC luting materials (Medicem and Ketac Cem Radiopaque). The control groups of both materials were prepared as such. The effect of reinforcement was evaluated in terms of microhardness, flexural strength (FS), fracture toughness (FT), and tensile strength (TS). The internal porosity and water contact angle formation on the study samples were also evaluated. Film thickness was measured to gauge the effect of micron-sized GA powder in GA-GIC composite. Paired sample t-tests were conducted to analyze data for statistical significance (p < 0.05). The experimental groups of both materials containing 0.5 wt.% GA-GIC significantly improved FS, FT, and TS compared to their respective control groups. However, the microhardness significantly decreased in experimental groups of both cements compared to their respective control groups. The addition of GA powder did not cause a significant increase in film thickness and the water contact angle of both 0.5 and 1.0 wt.% GA-GIC formulations were less than 90o. Interestingly, the internal porosity of 0.5 wt.% GA-GIC formulations in both materials were observed less compared to their respective control groups. The significantly higher mechanical properties and low porosity in 0.5 wt.% GA-GIC formulations compared to their respective control group indicate that reinforcing GA powder with 0.5 wt.% in GIC might be promising in enhancing the mechanical properties of GIC luting materials.

Vanadium dioxide (VO2) thin films of different thicknesses were prepared by regulating the deposition time (2, 2.5, 3, and 3.5 h). The impact of deposition time on the microstructure, surface morphology, and cross-section morphology was investigated. The results showed that the grain size increased with the film thickness. Meanwhile, the influence of film thickness on the residual stress was evaluated by X-ray diffraction. The phenomenon of \"compressive-to-tensile stress transition\" was illustrated as the thickness increased. The change of dominant mechanism for residual stress was used for explaining this situation. First, the composition of residual stress indicates that growth stress play a key role. Then, the effect of \"atomic shot peening\" can be used to explain the compressive stress. Lastly, the increased grain size, lower grain boundary density, and \"tight effect\" in the progress of film growth cause tensile stress.

The loosening of an artificial joint is a frequent and critical complication in orthopedics and trauma surgery. Due to a lack of accuracy, conventional diagnostic methods such as projection radiography cannot reliably diagnose loosening in its early stages or detect whether it is associated with the formation of a biofilm at the bone-implant interface. In this work, we present a non-invasive ultrasound-based interferometric measurement procedure for quantifying the thickness of the layer between bone and prosthesis as a correlate to loosening. In principle, it also allows for the material characterization of the interface. A well-known analytical model for the superposition of sound waves reflected in a three-layer system was combined with a new method in data processing to be suitable for medical application at the bone-implant interface. By non-linear fitting of the theoretical prediction of the model to the actual shape of the reflected sound waves in the frequency domain, the thickness of the interlayer can be determined and predictions about its physical properties are possible. With respect to determining the layer\'s thickness, the presented approach was successfully applied to idealized test systems and a bone-implant system in the range of approx. 200 µm to 2 mm. After further optimization and adaptation, as well as further experimental tests, the procedure offers great potential to significantly improve the diagnosis of prosthesis loosening at an early stage and may also be applicable to detecting the formation of a biofilm.