Periodontal regeneration is a challenge, and tissue engineering based on periodontal ligament stem cells (PDLSCs) has been shown to be a promising alternative to this process. However, the need for scaffolds has limited the therapeutic use of PDLSCs. In this context, scaffold-free tissue engineering using the cell sheet (CS) technique has been developed as an alternative approach to improve tissue regeneration. Previously, we showed that Protease-activated receptor-1 (PAR1) can regulate PDLSCs. Herein, we evaluate whether PAR1 influences osteogenesis in CSs produced from PDLSCs, without the use of scaffolds. PDLSCs were isolated and immunophenotyped. Then, CSs were obtained by supplementing the culture medium with ascorbic acid (50 µg/mL), and PAR1 was activated through its agonist peptide (100 nM). Scaffold-free 3D CSs were successfully produced from PDLSCs, and they showed higher proliferation potential than isolated PDLSCs. Also, PAR1 activation decreased senescence and improved osteogenic differentiation of CSs by increasing mineralized nodule deposition and alkaline phosphatase concentration; PAR1 also modulated osteogenic markers at the gene and protein levels. We further demonstrated that this effect was regulated by Wnt, TGF-βI, MEK, p38 MAPK, and FGF/VEGF signaling pathways in PDLSCs (p < 0.05%). Overall, PAR1 activation increased osteogenic activity in CSs, emerging as a promising scaffold-free therapeutic approach for periodontal regeneration.

The aim of this study was to assess the effect of adding arginine at different concentrations to commercial and experimental orthodontic resins on shear bond strength (SBS), as well as on the antimicrobial activity of arginine against S. mutans. Metal brackets were bonded onto the surface of 120 bovine incisors using Transbond, OrthoCem, and an experimental resin (ER), adding 0, 2.5, 5, and 7 wt.% of arginine. The SBS test was performed in deionized water at 37 ºC for 24 h, at 0.5 mm/min. SBS test results were subjected to two-way ANOVA and Tukey\'s test (α = 0.05). CFU/mL data (antimicrobial assessment) were assessed by Kruskal-Wallis and Dunn\'s tests (α = 0.05). No statistical difference between the resins was observed in untreated groups (p > 0.05). The addition of arginine at 2.5% (27.7 MPa) and 5% (29.0 MPa) increased the SBS of Transbond when compared (p < 0.05) to OrthoCem (18.5 and 15.6 MPa, respectively) and ER (16.3 and 18.1 MPa, respectively). Arginine at 7% improved the SBS of Transbond (24.1 MPa) and ER (21.0 MPa), which was statistically higher (p < 0.05) than OrthoCem (12.6 MPa). OrthoCem did not show a statistically significant difference at the three concentrations of arginine (p > 0.05). The addition of arginine to resins reduced the count of S. mutans (p < 0.05). As for ER, all concentrations of arginine significantly decreased CFU/mL (p < 0.05). Among commercial resins, only 7% of arginine significantly reduced CFU/mL. The addition of arginine did not interfere with the bond strength and demonstrated antibacterial activity against S. mutans.

Borosilicate glass was developed to enhance the mechanical behavior and smoothness of dental zirconia as an alternative to conventional glaze. This study assessed the mechanical and optical properties of 3 mol% yttria-stabilized tetragonal zirconia polycrystal (3Y-TZP) coated with borosilicate glass or a commercial glaze fired for an extended period of time. Disc-shaped 3Y-TZP zirconia specimens (Zpex, Tosoh) were sintered at 1550°C for 2 hours. The specimens were divided into three groups: as-sintered (control, C); commercial glaze (G); and borosilicate glass (SL). The glaze and borosilicate glass were applied over the zirconia and fired for 20 minutes at 950°C and 1200°C, respectively. Biaxial flexural strength, fractography, X-ray diffraction (XRD), roughness (Ra and Rz), fracture toughness (Vickers indentation method), color difference (∆E00), and translucency (TP00) analyses were conducted. The t-test or the one-way ANOVA and Tukey\'s tests were used to analyze the data (α = 0.05). Flexural strength data were subjected to the Weibull analysis. The SL group exhibited the highest flexural strength (1025.8 MPa), whereas the C (859.41 MPa) and G (816.0 MPa) groups exhibited similar values. The SL group also had the highest characteristic strength. The fracture origin in all groups was on the zirconia surface. XRD analysis revealed that the specimens from the SL group contained tetragonal, cubic, and monoclinic phases. The SL group presented the lowest surface roughness. Fracture toughness in the SL group was lower than in the C group, but similar to that observed in the G group. The translucency and color differences observed in the G and SL groups were similar. Borosilicate glass enhanced the flexural strength of 3Y-TZP, promoted the smoothest surface, and exhibited optical properties similar to those of the glaze.

The aim of this study was to evaluate the wettability and adhesion of self-organized TiO2 nanotubes formed on the surface of 8 commercially pure titanium (CP-Ti) disks and 12 dental implants (n = 12) by anodization in a glycerol-H2O (50-50 v/v) electrolyte containing NH4F. Two disk specimens were not submitted to anodization (controls). The nanotubes thus obtained had average dimensions of 50 nm in diameter by 900 nm in length. The treated disk specimens were stored for 2, 14 and 35 days (n = 2), and the wettability of their surfaces was evaluated with a goniometer at the end of each storing period. The adhesion of nanotubes to titanium was evaluated by field emission scanning electron microscopy after subjecting the 12 implants to a simulation of clinical stress in two-part synthetic bone blocks. After installing the implants with the application of an insertion torque, the two halves of the block were separated, and the implants were removed. The nanotubes remained adhered to the substrate, with no apparent deformation. The contact angles after 14 days and 35 days were 16.47° and 17.97°, respectively, values significantly higher than that observed at 2 days, which was 9.24° (p < 0.05). It was concluded that the method of anodic oxidation tested promoted the formation of a surface suitable for clinical use, containing nanotubes with levels of wettability and adhesion to titanium compatible with those obtained by other methods found in the literature. The wettability, however, did not prove stable over the tested storage periods.

UNASSIGNED: Internalized stigma among patients with tuberculosis (TB) significantly affects delayed diagnosis, increased disease transmission, and poor treatment outcomes. However, conclusive empirical evidence on psychosocial interventions to reduce internalized stigma among patients with TB in Thailand remains scarce.
UNASSIGNED: This study aimed to examine the impact of a peer support intervention on reducing internalized stigma among patients with TB in Thailand.
UNASSIGNED: A one-group within-subjects repeated-measure design was conducted in the Muang Maha Sarakham district, Thailand, from February 2023 to July 2023. The study included 26 participants who met specified criteria. Measurements were taken at baseline, three months, and six months following TB diagnosis and medication treatment. The peer support intervention comprised TB health education, psycho-educational sessions, self-management support, and home visits. The Internalized Stigma of Tuberculosis Scale Thai Version was used to measure internalized stigma. Statistical analyses included descriptive statistics and repeated measures ANOVA.
UNASSIGNED: Mean scores of total internalized stigma and its sub-dimensions (alienation, stereotype endorsement, discrimination experience, social withdrawal, and stigma resistance) differed significantly across the three-time points (p <0.001, p <0.001, p <0.001, p <0.001, p <0.001, p = 0.002, respectively). Furthermore, stigma resistance scores significantly increased from pre-intervention to three months (p = 0.005) and from pre-intervention to six months (p = 0.007). However, no significant increase was observed from three to six months (p = 0.079).
UNASSIGNED: The study underlines the positive impact of peer support intervention in reducing internalized stigma among patients with TB in Thailand over time. The findings suggest that interventions focusing on peer support can potentially address internalized stigma, highlighting the importance of integrating these strategies into healthcare practices to enhance patient care and improve TB management outcomes.

Presenting unpaired unconditional stimuli (US) during extinction training reduces the renewal of conditional fear due to context change and slows re-acquisition. The present study investigated whether this reduced return of fear is mediated by Pavlovian inhibitory conditioning to the conditional stimulus paired with the US during acquisition (CS+) that is acquired when this stimulus is presented without the US in an excitatory extinction context. Using an ABA renewal paradigm that trained extinction in a context different from acquisition and renewal test, participants either received no USs (Standard), five unsignalled US presentations (Unsignalled) or five presentations of the US preceded by a novel, third CS (Signalled) during extinction training. Extinction was followed by tests for renewal and re-acquisition. Replicating previous results, renewal of electrodermal conditional responses was observed in group Standard, but not in group Unsignalled. Signalling the additional USs, and thus reducing context conditioning and the potential for inhibitory conditioning, did not reduce their effect in that renewal was absent in group Signalled. These results are inconsistent with an inhibitory conditioning account of the effects of unpaired US presentations during extinction. A trial sequence learning account or an arousal account may explain the effects of unpaired presentations of the US during extinction.

While it is widely known that humans are typically highly accurate at recognizing familiar faces, it is less clear how efficiently recognition is achieved. In a series of three experiments, we used event-related brain potentials (ERP) in a repetition priming paradigm to examine the efficiency of familiar face recognition. Specifically, we varied the presentation time of the prime stimulus between 500 ms and 33 ms (Experiments 1 and 2), and additionally used backward masks (Experiment 3) to prevent the potential occurrence of visual aftereffects. Crucially, to test for the recognition of facial identity rather than a specific picture, we used different images of the same facial identities in repetition conditions. We observed clear ERP repetition priming effects between 300 and 500 ms after target onset at all prime durations, which suggests that the prime stimulus was sufficiently well processed to allow for facilitated recognition of the target in all conditions. This finding held true even in severely restricted viewing conditions including very brief prime durations and backward masks. We conclude that the facial recognition system is both highly effective and efficient, thus allowing for our impressive ability to recognise the faces that we know.

This in vitro study aimed to evaluate the repair bond strength of resin-modified glass ionomer cement using either the same material or a universal adhesive in the etch-and-rinse and self-etch modes plus resin composite. Twenty-four resin-modified glass ionomer cement blocks were stored in distilled water for 14 d and thermocycled. Sandpaper ground specimens were randomly assigned to three experimental groups according to the repair protocol: resin-modified glass ionomer cement (Riva Light Cure, SDI) and universal adhesive (Scotchbond Universal Adhesive, 3M Oral Care) in etch-and-rinse or self-etch modes and nanohybrid resin composite (Z350 XT, 3M Oral Care). After 24 h of water storage, the blocks were sectioned, and bonded sticks were subjected to the microtensile bond strength (μTBS) test. One-way ANOVA and Tukey\'s test were used to analyze the data. The failure mode was descriptively analyzed. The highest μTBS values were obtained when the resin-modified glass ionomer cement was repaired using the same material (p < 0.01). In addition, the mode of application of the universal adhesive system did not influence the repair bond strength of the resin-modified glass ionomer cement. Adhesive/mixed failures prevailed in all groups. Repair of resin-modified glass ionomers with the same material appears to be the preferred option to improve bond strength.

OBJECTIVE: To explore the association between violent behaviors and emotions in individuals with mental disorders, to evaluate the application value of facial expression analysis technology in violence risk assessment of individuals with mental disorders in supervised settings, and to provide a reference for violence risk assessment.
METHODS: Thirty-nine male individuals with mental disorders in supervised settings were selected, the participant risk of violence, cognitive function, psychiatric symptoms and severity were assessed using the Modified Overt Aggression Scale (MOAS), the Historical, Clinical, Risk Management-Chinese version(HCR-CV), the Positive and Negative Syndrome Scale (PANSS) and the Brief Psychiatric Rating Scale (BPRS). An emotional arousal was performed on the participants and the intensity of their emotions and facial expression action units was recorded before, during and after the arousal. One-way analysis of variance (ANOVA) was used to compare the differences in the intensity of emotions and facial expression action units before, during and after the arousal. Pearson correlation analysis was used to calculate the correlations between the intensity of the seven basic emotional facial expressions and the scores of the assessment scales.
RESULTS: The intensity difference of sadness, surprise and fear in different time periods was statistically significant (P<0.05). The intensity of the left medial eyebrow lift action unit was found significantly different before and after the emotional arousal (P<0.05). The intensity of anger was positively correlated with the Modified Overt Aggression Scale score throughout the experiment (P<0.05).
CONCLUSIONS: Eye action units such as eyebrow lifting, eyelid tightening and upper eyelid lifting can be used as effective action units to identify sadness, anger and other negative emotions associated with violent behaviors. Facial expression analysis technology can be used as an auxiliary tool to assess the potential risk of violence in individuals with mental disorders in supervised settings.
目的: 探究精神障碍者暴力攻击行为与其情绪之间的联系，评价表情分析技术在监管场所内精神障碍者暴力风险评估中的应用价值，为暴力风险评估提供参考依据。方法: 选取39例监管场所男性精神障碍者，采用修改版外显攻击行为量表，暴力历史、临床、风险评估量表中文版，阳性与阴性症状量表和简明精神病量表，评估受试者的暴力风险、认知功能、精神症状及严重程度，对受试者进行情绪唤醒并记录唤醒前、唤醒后及唤醒过程中的情绪及表情动作单元强度，采用单因素重复测量方差分析比较唤醒前、唤醒后及唤醒过程中的情绪和表情动作单元强度差异，并采用Pearson相关分析计算7种基础情绪表情强度与评估量表评分间的相关性。结果: 受试者的悲伤、惊奇和惧怕3种情绪在不同时间段强度差异具有统计学意义（P<0.05），左内侧眉毛提起动作单元强度在诱发情绪前后强度差异具有统计学意义（P<0.05），愤怒情绪强度在整个研究过程中均与修改版外显攻击行为量表评分呈正相关（P<0.05）。结论: 眉毛提起、眼睑收紧、上眼睑提起等眼部动作单元可以作为识别暴力攻击行为相关的负性情绪（如悲伤、愤怒）的有效动作单元，表情分析技术可作为辅助手段应用于监管场所内精神障碍者的潜在暴力风险评估。.

OBJECTIVE: Bisphosphonates are prescribed to treat excessive bone resorption in patients with osteoporosis. However, its use is associated with potential adverse effects such as medication-related osteonecrosis of the jaw, prompting the introduction of the drug holiday concept in patients prior to dentoalveolar surgery. Furthermore, bisphosphonate discontinuation has been studied in vivo, in humans, and in animal models. However, it is not known whether this approach could affect bone cells in vitro. Therefore, the objective of this study was to investigate the potential effects of bisphosphonate discontinuation on pre-osteoblast and osteoblast activities in vitro.
METHODS: Pre-osteoblasts (MC3T3) and osteoblasts were treated with bisphosphonate (alendronate) at concentrations of 1, 5, and 10 µM. Alendronate was then withdrawn at different time points. The negative control consisted of untreated cells (0 µM), while the positive control consisted of cells incubated with alendronate throughout the experiment. Cell viability, cell adhesion, cell cytoskeleton, mineralization, and gene expressions were investigated.
RESULTS: Pre-osteoblasts and osteoblasts showed a decrease in cell viability after treatment with 5-10 μM alendronate for 4 days or longer. Two days of alendronate discontinuation significantly increased cell viability compared with the positive control. However, these levels did not reach those of the negative control. Bone nodule formation was reduced by alendronate. Discontinuation of alendronate regained bone nodule formation. Longer periods of discontinuation were more effective in restoring nodule formation than shorter periods. Addition of alendronate resulted in an increase in the percentage of dead cells, which, in turn, decreased when alendronate was discontinued. Alendronate affected the cell cytoskeleton by disassembling actin stress fibers. Cell adhesion and cell morphological parameters were also affected by alendronate. Discontinuation of alendronate restored cell adhesion and these parameters. Overall, the highest improvement after alendronate discontinuation was seen at 10 µM. However, alendronate treatment and discontinuation did not affect osteoblast gene expression.
CONCLUSIONS: Discontinuation of alendronate helps to reverse the negative effects of the drug on cell viability, cell adhesion, and mineralization by restoring the cell cytoskeleton. Our data suggest the benefits of drug holiday and/or intermittent strategies for alendronate administration at the cellular level.