UNASSIGNED: Despite the introduction of several anticaries products, dental caries continues to be a global problem. In recent years, there has been a rise in interest in noninvasive treatment for noncavitated caries lesions by employing remineralization concepts. Each remineralizing agent has its own drawbacks. Therefore, it is desirable to seek new agents that offer the advantages of earlier counterparts with lower detrimental reactions.
UNASSIGNED: The purpose of this research is to evaluate the remineralization efficacy of nanoparticle-based materials on white spot lesion (WSL) in children.
UNASSIGNED: A total of 45 children between the age-group of 4 and 8 years with WSLs were selected and randomly divided into three groups. At baseline, the teeth with WSLs were confirmed and identified using International Caries Detection and Assessment System II (ICDAS II) criteria, and the dimensions of the lesions were measured using photographic methods. Then, they were randomly placed into three groups of 15 samples each-group I nanosilver fluoride (NSF), group II nanohydroxyapatite (nano-HAP) serum, and group III MI varnish. Following that, the varnish was applied, and follow-up was done in the 2nd, 4th, 12th, and 24th week.
UNASSIGNED: By the 4th week, all three groups had a statistically significant difference (p < 0.05). Baseline measurements for groups I, II, and III showed that their respective mean WSL dimensions were 4.9 ± 0.66, 4.27 ± 0.69, and 5.44 ± 2.95. The dimensions of each group were reduced by the 24th week to 1.22 ± 0.46, 0.93 ± 0.41, and 2.19 ± 1.40, respectively. Overall, group II (nano-HAP serum) showed a statistically significant decrease in the dimension of the lesion at the end of the 24th week, followed by groups I and III.
UNASSIGNED: The remineralization of enamel was induced by all three agents. Nano-HAP serum is more successful than MI Varnish and NSF.
UNASSIGNED: Annadurai T, Vundela RR, Chowdhary N, et al. Evaluation of Remineralization Efficacy of Nanoparticle-based Materials on White Spot Lesions in Children: A Comparative Clinical Study. Int J Clin Pediatr Dent 2024;17(4):425-432.

Orthodontic adhesive doped with sulfur-modified TiO2 promotes antibacterial effect. The objective of the study was to characterize the physical, mechanical and antibacterial properties of the orthodontic bracket adhesive, doped with modified titanium dioxide nanoparticles. Sulfur-doped TiO2 was synthetized and morphological topography was analyzed with TEM and SEM imaging. The catalytic performance during the degradation of rhodamine B was assessed. Nanomaterial was added at four concentration (1, 3, 6, and 10 wt%) to a commercial orthodontic adhesive. The shear bond strength and microhardness of a resin-based orthodontic adhesive containing S-TiO2 were evaluated. The inhibitory effect of the pure and doped adhesives against Escherichia coli and Streptococcus mutans was examined. As the results, the highest antimicrobial activity and good adhesive properties were noticed for light-cured orthodontic adhesive doped with 3% of S-TiO2. In this case, orthodontic adhesives with strong and long-lasting bactericidal properties can be created through the incorporation of modified TiO2 without negatively influencing microhardnesses, and bonding ability. White spot lesion and demineralization, which occurs very often in patients during orthodontic treatment, can be therefore minimized.

Fixed appliance (FA) therapy predisposes patients to white spot lesions (WSLs). The F-ACP complex (amorphous calcium phosphate nanoparticles enriched with carbonate and fluorine and coated with citrate) has been effective for in vitro enamel remineralization. The aim of this study was to evaluate the efficacy of the F-ACP complex in remineralizing WSLs after FA therapy. One hundred and six adolescents (aged 12-20 years) were randomized into study and control groups after FA therapy. Patients in the study group were advised to use dental mousse containing F-ACP applied within Essix retainers for six months. The presence of WSLs was recorded at baseline (T0), 3 months (T1), and 6 months (T2) according to the International Caries Detection and Assessment System (ICDAS). Visual Plaque Index (VPI) and Gingival Bleeding Index (GBI) were recorded. Among 106 study participants, 91 (52 and 39 in study and control groups, respectively) completed the study. The results showed that the ICDAS score was significantly lower (p < 0.001) in the study group than in the control group between T0 and T2. The application of mousse containing the F-ACP complex inside Essix retainers for six months is effective in remineralizing white spot lesions in patients after FA therapy without side effects.

OBJECTIVE: Protocols that determine the lesion depth of specific demineralization solutions are lacking. This in vitro study aimed to evaluate various lesion depths of artificial white spot lesions (WSLs) at different exposure times.  Materials and methods: Artificial WSLs were created by placing 30 extracted human premolar teeth into 0.05M acetate buffer solution with a controlled environment of pH 4.4 at 37ºC, which were then exposed in the solution for various durations of 4, 5, 6, 8, 10, and 12 days. The specimens were visually examined using the Ekstrand-Ricketts-Kidd (ERK) system to confirm the WSL, followed by buccolingual sectioning, and evaluated under a scanning electron microscope (SEM) to measure the lesion depth.
RESULTS: The SEM showed that the mean lesion depths of representative specimens were 101.33 µm (day 4), 124 µm (day 5), 159 µm (day 6), 187 µm (day 8), 202 µm (day 10), and 212 µm (day 12). The artificial WSL was visually demonstrated in grades 1 and 2 of the ERK system.
CONCLUSIONS: The depths of the lesions increased as the duration increased from day 4 to day 12, indicating that the lesion depths increased with the more prolonged exposure to the acetate buffer solution.

In this preliminary study, a multidisciplinary method based on high-resolution analytical techniques (such as microcomputed tomography, Raman Microspectroscopy, scanning electron microscopy, and Vickers microhardness test) was exploited to evaluate the alterations that occur in human teeth at the initial stage of the carious lesion. To this purpose, six extracted molars displaying a natural white spot lesion (WSL) were investigated. Specific morphological, structural, and chemical parameters, such as the mineral density, indentation hardness, molecular and elemental composition, and surface micromorphology were obtained on the WSL, and the results were statistically compared (t-test, p < 0.05) to those of the sound enamel on the same tooth. In the WSL, with respect to the sound area, a decrease in the mineral density and crystallinity was detected together with differences in the molecular composition and surface microstructure, such as the occurrence of micropores and irregularities. Moreover, the elemental analysis highlighted in WSL showed a statistically significant decrease in Ca and P percentages. In conclusion, this multidisciplinary approach allows us to fully characterize the area of interest, providing a deeper knowledge of these enamel lesions, which could have important clinical implications.

UNASSIGNED: To evaluate the changes in lesion depth and mineral density of resin infiltration-treated white spot lesions against a simulated oral environment using thermal and acidic challenges in vitro.
UNASSIGNED: Two enamel slabs were prepared from each buccal surface of permanent human premolars, for a total of 56 slabs. Artificial white spot lesions were induced. One specimen was treated with resin infiltration, while the other was used as an untreated control. A micro-CT was used to assess the lesion depth and mineral density of each specimen. Subsequently, all specimens were subjected to 10,000 cycles of thermocycling and pH cycling for 10 days before being re-evaluated using the micro-CT. Lesion depth and mineral density were examined and compared between before and after aging procedures within each group by the paired sample t-test. The independent samples t-test was utilized to compare lesion depth progression and percentage change of mineral density between groups.
UNASSIGNED: After aging, there was both a significant lesion depth progression and a mineral loss in the control and resin infiltration groups. Mean lesion depth progression was 132.88 ± 4.18 µm for the control group and 52.31 ± 4.16 µm for resin infiltration group. Percentage mineral density loss as a percentage for the control and resin infiltration groups were 16.1 ± 0.64 % and 8.83 ± 0.30 %, respectively. The resin infiltration group demonstrated a significantly lower mean lesion depth progression and percentage changes in mineral loss compared to the control group.
UNASSIGNED: The lesion depth and mineral density changes in the resin infiltrated-treated group were lower than untreated white spot lesions after aging procedures using thermal and acidic challenges.
UNASSIGNED: Resin infiltration is a promising approach to inhibit the progression of white spot lesions related to the initial stage of dental caries.

BACKGROUND: Non-invasive restoration of tooth enamel is a topic of high relevance in dental material science. Multiple approaches have been proposed to reach optimum reconstruction results. The current study was performed to evaluate the cross-sectional microhardness besides mineral quality and content in artificially induced carious enamel after treatment with hydroxyapatite-chitosan (HAp-CS) nanocomposite gel.
METHODS: Artificially carious lesions were induced by immersion of teeth in acidic carboxymethyl cellulose gel (pH 4.95-5) for 24- and 72-hours periods. Two different compositions of HAp-CS nanocomposite hydrogel were prepared with two different ratios 50/50 (%) and 70/30 (%), respectively. Additionally, sodium fluoride gel (1000 ppm concentration) was prepared and used as reference. Gels were applied to carious lesions twice/day for 3 min/each. After 45 days of application, surface morphology, energy dispersive x-ray spectroscopy, micro-Raman analysis in addition to cross-sectional microhardness were evaluated. Statistical analysis was performed using two-way ANOVA and Tukey\'s post hoc statistical tests.
RESULTS: Surface morphological evaluation of treated surfaces showed obliteration of surface irregularities. Groups demineralized for 24 hours and treated with 70/30 (HAp-CS) showed highest significant cross-sectional-microhardness (P ≤ 0.05). Evaluated subsurface cross-sectional microhardness showed better mineral quality for groups demineralized for 24 hours and treated with HAp-CS nanocomposite gels.
CONCLUSIONS: Nanocomposite gel with 70/30 (HAp-CS) could efficiently improve cross-sectional microhardness and both minerals composition and quality for lesions demineralized for 24 hours. More severely induced lesions, as demineralized for 72 hours, need more powerful agent compositions and/or prolonged application protocols for improvement.

UNASSIGNED: To evaluate the aesthetic outcome by varying the duration allowed for infiltrant penetration when treating white spot lesions with resin infiltration.
UNASSIGNED: An in vitro, experimental randomised study.
UNASSIGNED: Artificially created white spot lesions (WSLs) were induced on 100 extracted anterior teeth (T1). Teeth were divided into enamel and dentine groups depending on the extent of the lesion and then randomly assigned into different treatment protocol groups: penetration times of 3, 6 and 9 min. Resin infiltration treatment was applied according to the treatment protocol assigned (T2). Samples were thermocycled for 10,000 cycles (1 clinical year) (T3). The samples from the 3-min enamel and dentine groups were then randomly assigned into either a repeat treatment or no additional treatment group (T4). Samples were then thermocycled for an additional 10,000 cycles (T5). Spectrophotometric analysis was measured colour change (ΔE) for all groups.
UNASSIGNED: Mean ΔE values equal to or greater than the critical value (3.7) indicate a detectable clinical difference in colour of the treated WSL when compared to before WSL formation. Mean ΔE values, for the enamel groups, were slightly above or significantly below the critical value, and for the dentine groups, were significantly above the critical value. Mean ΔE values within the enamel and dentine groups both demonstrated a downward trend with increasing time allowed for resin infiltrant penetration (P < 0.05). No significant mean ΔE difference (P = 0.53) was found between groups that received a single or repeat treatment. After the first thermocycling event, no significant difference in colour change was observed in all groups except for the deep dentine lesion treated for 3 min. There was a significant difference in colour change for all groups except the enamel group that received a single treatment following thermocycling after a single or repeat treatment.
UNASSIGNED: Increasing the resin infiltrant penetration time to at least 9 min is advised as the most optimised treatment protocol. Resin infiltration treatment should be done only once to treat a particular white spot lesion as subsequent treatment for the same lesion results in marginal colour improvement. The colour improvement of WSLs resulting from the resin infiltration treatment can be expected to last for at least 1 year. Resin infiltration treatment of shallow lesions with a single and optimised infiltration technique can be expected to last an additional year.

Due to multifactorial aetiology, tooth surfaces of primary dentition are more prone to dental caries and follow the specific pattern of dental caries which is difficult to control. The proper knowledge of caries-susceptible areas on individual primary teeth surfaces guides the clinician to take early preventive measures to stop the progression of dental caries. This study aims to find the prevalence of caries-susceptible areas on primary teeth surfaces in preschool children and the most commonly affected primary teeth. The study design adopted was a cross-sectional study. A total number of 3720 teeth of 186 preschool children were examined for initial pinpoint caries lesions using World Health Organization (WHO) caries detection criteria. 33 caries-susceptible areas were examined on individual primary tooth surfaces of preschool children who visited the Faculty of Dental Sciences. Each tooth surface was recorded separately and no radiographic examination was done. Obtained data was analysed keeping the level of significance at 5%. The overall prevalence of caries-susceptible area was found significantly higher in the maxillary teeth (Maxillary teeth: 41.7% vs. Mandible teeth: 30.7%; p < 0.001) and anterior teeth (Anterior teeth: 43.7% vs. Posterior teeth: 28.4%; p < 0.001). The prevalence of caries-susceptible area on primary teeth on the right side when compared to left counterparts was similar (Right side-38.6% and left side-38.4%; p = 0.931). Area 2 was the most prevalent area on primary teeth surfaces and primary canine was more prevalent in caries-susceptible areas.

BACKGROUND: Demineralization of the enamel surface, which appears as white spot lesions during and after removal of the fixed orthodontic appliance, is the most common disadvantage of the orthodontic treatment course. Using the remineralizing agents during and after orthodontic treatment helps to avoid those enamel defects.
OBJECTIVE: The present study aims to assess the remineralizing effect of the chicken eggshell powder on the demineralized enamel surfaces after debonding the orthodontic bracket system.
METHODS: The current study was performed on 80 prepared premolar crowns embedded into acrylic molds. The samples were prepared to receive routine steps of the bonding process for the bracket system. The paste of the chicken eggshell powder was added to the samples after the debonding process. Scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX) were used to evaluate the remineralization effect of the chicken eggshell powder. Also, the Vickers microhardness tester was used to assess the enamel surface microhardness.
RESULTS: It was found that the mean value of the Ca/P ratio for the samples before bonding of the orthodontic bracket system was (4.17 ± 2.2). This value significantly decreased to (2 ± 1.3) after debonding of the orthodontic bracket system and then showed a significant increase to (4.79 ± 2.65) after remineralization. These results were assured by the values of the Vickers microhardness tester.
CONCLUSIONS: The chicken eggshell powder has an excellent remineralization effect for the demineralized enamel surface after debonding the orthodontic enamel surface.