BACKGROUND: The increasing number of fatalities caused by gluteal fat grafting is concerning; thus, there is a need to determine ways to obtain the ideal aesthetic effect while ensuring a safe operation. In this study, three-dimensional (3D) measurements combined with B-ultrasound were used to evaluate the effect of gluteal fat augmentation in Asians, whose safety and effectiveness were confirmed using quantitative data.
METHODS: Thirty-five consecutive female patients were evaluated in this prospective clinical study. All patients underwent B-ultrasound-assisted gluteal fat augmentation on the subcutaneous plane alone. 3D imaging and B-ultrasound analysis of the adipose tissue thickness in the gluteal region were performed preoperatively and at 1 week, 3 months and 6 months post-operatively.
RESULTS: The waist circumference of the patients decreased, gluteal circumference and length of the gluteal crease increased and average waist-to-hip ratio improved from 0.78 to 0.74. At 3 months and 6 months post-operatively, the adipose tissue thickness decreased by 5.1% and 15.1%, respectively. The fat retention rates calculated using 3D imaging measurements at 3 months and 6 months post-operatively were 77.9% and 64.7%, respectively. According to the BODY-Q scale scores, patients reported a high level of satisfaction post-operatively.
CONCLUSIONS: B-ultrasound guidance can effectively prevent the occurrence of fatal fat embolism during gluteal fat grafting and maximise the augmentation effect. The quantitative data obtained using 3D measurements and B-ultrasound confirmed the safety and effectiveness of fat injections for gluteal augmentation under B-ultrasound guidance.

To address the issues of low measurement accuracy and unstable results when using binocular cameras to detect objects with sparse surface textures, weak surface textures, occluded surfaces, low-contrast surfaces, and surfaces with intense lighting variations, a three-dimensional measurement method based on an improved feature matching algorithm is proposed. Initially, features are extracted from the left and right images obtained by the binocular camera. The extracted feature points serve as seed points, and a one-dimensional search space is established accurately based on the disparity continuity and epipolar constraints. The optimal search range and seed point quantity are obtained using the particle swarm optimization algorithm. The zero-mean normalized cross-correlation coefficient is employed as a similarity measure function for region growing. Subsequently, the left and right images are matched based on the grayscale information of the feature regions, and seed point matching is performed within each matching region. Finally, the obtained matching pairs are used to calculate the three-dimensional information of the target object using the triangulation formula. The proposed algorithm significantly enhances matching accuracy while reducing algorithm complexity. Experimental results on the Middlebury dataset show an average relative error of 0.75% and an average measurement time of 0.82 s. The error matching rate of the proposed image matching algorithm is 2.02%, and the PSNR is 34 dB. The algorithm improves the measurement accuracy for objects with sparse or weak textures, demonstrating robustness against brightness variations and noise interference.

Underground displacement monitoring is a crucial means of preventing geological disasters. Compared to existing one-dimensional methods (measuring only horizontal or vertical displacement), the underground displacement three-dimensional measurement method and monitoring system proposed by the author\'s research team can more accurately reflect the internal movement of rock and soil mass, thereby improving the timeliness and accuracy of geological disaster prediction. To ensure the reliability and long-term operation of the underground displacement three-dimensional monitoring system, this article further introduces low-power design theory and Bluetooth wireless transmission technology into the system. By optimizing the power consumption of each sensing unit, the current during the sleep period of a single sensing unit is reduced to only 0.09 mA. Dynamic power management technology is employed to minimize power consumption during each detection cycle. By using Bluetooth wireless transmission technology, the original wired communication of the system is upgraded to a relay-type wireless network communication, effectively solving the problem of the entire sensing array\'s operation being affected when a single sensing unit is damaged. These optimized designs not only maintain monitoring accuracy (horizontal and vertical displacement errors not exceeding 1 mm) but also enable the monitoring system to operate stably for an extended period under harsh weather conditions.

UNASSIGNED: To investigate the effect of micro-implant anchorage combined with a clear aligner on the efficiency of mandibular molar distalization and the protection of anterior teeth anchorage, provide reference for clinical scheme design.
UNASSIGNED: This is a prospective study. Seventeen patients who were treated in the Orthodontics Department of the Hospital of Stomatology affiliated to Fujian Medical University from 2019 to 2021 and used Invisalign clear aligners to move mandibular molars distally were included and divided into two groups according to anchorage types: Group-A and Group-B. Group-A (ten cases) were treated without micro-implant anchorage, while Group-B (seven cases) were treated with micro-implant anchorage nails for enhanced anchorage. The effect of micro-implant anchorage on crown and root distal movement of mandibular molars and the difference in three-dimensional movement between mandibular molars and mandibular central incisors were analyzed.
UNASSIGNED: The crown distalization efficiency of mandibular first and second molars in Group-B was 68.66% and 71.02%, respectively, which were higher than those in Group-A(p<0.05). The mandibular central incisors in Group-A showed labial displacement and a small amount of elongation, while those in Group-B showed less anchorage loss(p<0.05). In Group-A, the crown was tilted in the distal direction and moved in the buccal direction during mandibular molar distalization(p<0.05). While in Group-B, the crown was tilted in the distal directio (p<0.05) and the mandibular second molar was depressed(p<0.05).
UNASSIGNED: In the process of mandibular molar distalization assisted by micro-implant anchorage combined with a clear aligner, better protects the anchorage of the mandibular central incisor and improves the efficiency of the molar crown distalization.

Morphology plays a crucial role in understanding the intricacies of biological forms. Traditional morphometric methods, focusing on one- or two-dimensional geometric levels, often fall short of accurately capturing the three-dimensional (3D) structure of organisms. The advent of 3D scanning techniques has revolutionized the study of organismal morphology, enabling comprehensive and accurate measurements. This study employs a 3D structured light scanning system to analyze the morphological variations in the Chinese toad (Bufo gargarizans Cantor, 1842) along the Yellow River Basin. The 3D digital model obtained from the scan was used to calculate various morphological parameters including body surface area, volume, fractal dimensions, and limb size. The research explores geographic variability patterns and identifies environmental drivers affecting the 3D phenotypic variation of B. gargarizans. Results reveal a bimodal pattern of variation in the toad population, with higher elevations exhibiting smaller body sizes, greater appendage proportions, and more complex body structures. Linear regression analyses highlight the influence of elevation and annual mean temperature on the morphological variation of B. gargarizans, with elevation playing a significant role. This study underscores the significance of 3D morphometric analysis in unraveling the intricacies of organismal morphology and understanding the adaptive strategies of species in diverse environments.

OBJECTIVE: This study aims to evaluate the morphological features of gubernacular tract (GT) for erupting permanent mandibular canines at different ages from 5 to 9 years old with a three-dimensional (3D) measurement method.
METHODS: The cone-beam CT images of 50 patients were divided into five age groups. The 3D models of the GT for mandibular canines were reconstructed and analysed. The characteristics of the GT, including length, diameter, ellipticity, tortuosity, superficial area, volume, and the angle between the canine and GT, were evaluated using a centreline fitting algorithm.
RESULTS: Among the 100 GTs that were examined, the length of the GT for mandibular canines decreased between the ages of 5 and 9 years, while the diameter increased until the age of 7 years. Additionally, the ellipticity and tortuosity of the GT decreased as age advanced. The superficial area and volume exhibited a trend of initially increasing and then decreasing. The morphological variations of the GT displayed heterogeneous changes during different periods.
CONCLUSIONS: The 3D measurement method effectively portrayed the morphological attributes of the GT for mandibular canines. The morphological characteristics of the GT during the eruption process exhibited significant variations. The variations in morphological changes may indicate different stages of mandibular canine eruption.

Accurate orthodontic analysis and diagnosis based on anatomical landmarks is essential to the success of orthodontic treatment. Helical computed tomography (CT) has evolved markedly, and dentists can now quickly obtain 3-dimensional (3D) reconstruction data using this imaging modality. The planning of orthodontic treatment had traditionally been based on cephalometric analysis using 2D landmarks. This study aimed to collect 3D morphological data using CT images to establish new landmarks for analysis and diagnosis in orthodontic treatment. Twenty male and 20 female adult Japanese dry skulls with of normal occlusion were selected. The skulls were scanned using a multidetector helical CT system (SIEMENS, Volume Zoom Plus 4, Germany). Models were reconstructed using 3D measurement software (Simplant, Dentsply Sirona, Tokyo, Japan) and 45 landmarks determined. Three-dimensional measurement for a total of 30 items representing these landmarks was then performed. The results provided 3D standard values for maxillofacial morphology in adult Japanese individuals with normal occlusion. These measurement items should allow the disadvantages of 2D cephalometric analysis to be overcome.

The aims of this study were to analyze the morphological changes of the mandibular angle after orthognathic surgery for mandibular setback and investigate related factors. This retrospective study included patients from January 2017 to December 2021 diagnosed with skeletal class III deformity who underwent BSSRO (Group I) or bimaxillary surgery (Group II). Preoperative (T0), within 1 month postoperatively (T1), and 6 months postoperatively (T2) CT scans were collected from 61 patients to three-dimensionally analyze the proximal segment displacement, the linear and angular changes of the mandibular angle. The gonion points moved posteriorly and laterally (P < 0.001), while the inferior movement was not significant (P = 1.000, P = 0.274). The intergonial width increased by 3.32 ± 1.87 mm and 2.34 ± 1.77 mm as revealed by T2 CTs, respectively, in Group I and Group II. Mandibular angle decreased in both groups and by 1.41 ± 2.95° in Group I and 1.37 ± 3.41° in Group II. The increase in intergonial width between T1 and T0 was negatively correlated with the preoperative mandibular angle (P = 0.003) and positively correlated with the transverse outward movement of the proximal segment (P < 0.001). After surgery, the intergonial width increased and the inferior and posterior border of the proximal segment flared outward. The changes in intergonial width and mandibular angle were mainly related to the rotation of the proximal segment, which has a certain impact on the aesthetics of the lower face. Therefore, controlling the position of the proximal segment is of vital importance to lessen the changes in the mandibular angle area.Level of Evidence III. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Orbital floor fractures (OFFs) are common injuries of the midface and may result in long-term complications. The aim of this study was to compare two restoration materials, PDS foils and titanium meshes, with regards to (1) clinical outcome and (2) reduction in orbital volume. The monocentric discovery cohort was analyzed retrospectively and included 476 patients with OFFs treated between 2010 and 2020. A subcohort of 104 patients (study cohort) with isolated OFFs and available high-resolution imaging material was used for volume measurements. Postoperative complications were not significantly different between patients treated with different restoration materials. Prevalence of revision surgery was significantly higher in patients treated with thick PDS foils (25 mm). OFFs treated with PDS foils and titanium meshes showed a significant reduction in orbital volume (p = 0.0422 and p = 0.0056, respectively), however, this volume decrease was significantly less pronounced in patients treated with PDS foils alone (p = 0.0134). Restoration using PDS foil in an isolated OFF reduces the orbital volume to a lesser extent than titanium mesh. Class III patients according to the classification of Jaquiéry with a missing bony ledge medial to the infraorbital fissure particularly benefit from restoration with PDS foils due to a lower reduction in the orbital volume. Regarding short- and long-term postoperative complications, a PDS foil thickness of 0.15 mm appears equivalent to titanium mesh in the treatment of OFFs.

Due to the advantages of simple construction, easy application and good environmental suitability, handheld structured-light measurement systems have broad application prospects in 3D measurements. Here, a monocular-vision-guided line-structured-light measurement system is developed, and the posture of the handheld device can be obtained via a specifically designed target attached to it. No more marker points need to be adhered onto the object under inspection. The key for the system calibration is to obtain the coordinate transformation matrix from the sensor to the featured target coordinate system. The mathematical model of the system is first established. Then, an improved multi-view calibration method is proposed, where a selection process for the image pairs is conducted for accuracy improvement. With this method, the maximum relative error of the measured stair heights can be reduced from 0.48% to 0.16%. The measurement results for the specific parts further verified the effectiveness of the proposed system and the calibration method.