Macrofungi commonly referred to as Mushrooms are distributed worldwide and well known for their nutritional, medicinal, and organoleptic properties. Strain improvement in mushrooms is lagging due to paucity of efficient genome modification techniques. Thus, for advanced developments in research and commercial or economical viability and benefit, CRISPR/Cas9 (clustered regularly interspaced short palindromic repeats/CRISPR-associated nuclease 9) emerged as an efficient genome editing tool. The higher efficiency and precision of the desired genetic modification(s) are the most valuable attributes of this recent technology. The present review comprehensively summarizes various conventional methods utilized for strain improvement in mushrooms including hybridization, protoplast fusion, and di-mon mating. Furthermore, the problems associated with these techniques have been discussed besides providing the potential recluses. The significance of CRISPR/Cas9 strategies employed for improvement in various mushroom genera has been deliberated, as these strategies will paves the way forward for obtaining improved strain and effective cultivation methods for enhancing the yield and quality of the fruit bodies.

BACKGROUND: Oritavancin is a new generation of semi-synthetic glycopeptide antibiotics against Gram-positive bacteria, which served as the first and only antibiotic with a single-dose therapeutic regimen to treat ABSSSI. A naturally occurring glycopeptide A82846B is the direct precursor of oritavancin. However, its application has been hampered by low yields and homologous impurities. This study established a multi-step combinatorial strategy to rationally construct a high-quality and high-efficiency biosynthesis system for A82846B and systematically optimize its fermentation process to break through the bottleneck of microbial fermentation production.
RESULTS: Firstly, based on the genome sequencing and analysis, we deleted putative competitive pathways and constructed a better A82846B-producing strain with a cleaner metabolic background, increasing A82846B production from 92 to 174 mg/L. Subsequently, the PhiC31 integrase system was introduced based on the CRISPR-Cas12a system. Then, the fermentation level of A82846B was improved to 226 mg/L by over-expressing the pathway-specific regulator StrR via the constructed PhiC31 system. Furthermore, overexpressing glycosyl-synthesis gene evaE enhanced the production to 332 mg/L due to the great conversion of the intermediate to target product. Finally, the scale-up production of A82846B reached 725 mg/L in a 15 L fermenter under fermentation optimization, which is the highest reported yield of A82846B without the generation of homologous impurities.
CONCLUSIONS: Under approaches including blocking competitive pathways, inserting site-specific recombination system, overexpressing regulator, overexpressing glycosyl-synthesis gene and optimizing fermentation process, a multi-step combinatorial strategy for the high-level production of A82846B was developed, constructing a high-producing strain AO-6. The combinatorial strategies employed here can be widely applied to improve the fermentation level of other microbial secondary metabolites, providing a reference for constructing an efficient microbial cell factory for high-value natural products.

BACKGROUND: Entomopathogenic fungi, such as Beauveria bassiana, hold promise as biological control agents against insect pests. However, the efficacy of these fungi can be hindered by insect immune responses. One strategy to enhance fungal virulence is to manipulate host immune by targeting key regulatory molecules like 20-hydroxyecdysone (20E).
RESULTS: In this study, we engineered B. bassiana strains to constitutively express the enzyme ecdysteroid UDP-glucosyltransferase (EGT), which inactivates 20E, a crucial insect molting hormone. The engineered strain Bb::EGT-1 exhibited robust expression of EGT, leading to a significant reduction in insect 20E levels upon infection. Moreover, infection with Bb::EGT-1 resulted in accelerated larval mortality. Immune responses analysis revealed repression of insect immune response genes and decreased phenoloxidase (PO) activity in larvae infected with Bb::EGT-1. Microbiome analysis indicated alterations in bacterial composition within infected insects, with increased abundance observed during infection with Bb::EGT-1. Additionally, the presence of bacteria hindered hyphal emergence from insect cadavers, suggesting a role for microbial competition in fungal dissemination.
CONCLUSIONS: Constitutive expression of EGT in B. bassiana enhances fungal virulence by reducing insect 20E levels, suppressing immune responses, and altering the insect microbiome. These findings highlighted the potential of engineered fungi as effective biocontrol agents against insect pests and provide insights into the complex interactions between entomopathogenic fungi, their hosts, and associated microbes. © 2024 Society of Chemical Industry.

Microfluidic systems have fundamentally transformed the realm of adaptive laboratory evolution (ALE) for microorganisms by offering unparalleled control over environmental conditions, thereby optimizing mutant generation and desired trait selection. This review summarizes the substantial influence of microfluidic technologies and their design paradigms on microbial adaptation, with a primary focus on leveraging spatial stressor concentration gradients to enhance microbial growth in challenging environments. Specifically, microfluidic platforms tailored for scaled-down ALE processes not only enable highly autonomous and precise setups but also incorporate novel functionalities. These capabilities encompass fostering the growth of biofilms alongside planktonic cells, refining selection gradient profiles, and simulating adaptation dynamics akin to natural habitats. The integration of these aspects enables shaping phenotypes under pressure, presenting an unprecedented avenue for developing robust, stress-resistant strains, a feat not easily attainable using conventional ALE setups. The versatility of these microfluidic systems is not limited to fundamental research but also offers promising applications in various areas of stress resistance. As microfluidic technologies continue to evolve and merge with cutting-edge methodologies, they possess the potential not only to redefine the landscape of microbial adaptation studies but also to expedite advancements in various biotechnological areas. KEY POINTS: • Microfluidics enable precise microbial adaptation in controlled gradients. • Microfluidic ALE offers insights into stress resistance and distinguishes between resistance and persistence. • Integration of adaptation-influencing factors in microfluidic setups facilitates efficient generation of stress-resistant strains.

Secondary metabolites are produced by microbes in minimal quantities in the natural environment out of necessity. However, in the pharmaceutical industry, their overproduction becomes essential. To achieve higher yields, genetic modifications are employed to create strains that surpass the productivity of the initially isolated strains. While rational screening and genetic engineering have emerged as valuable practices in recent years, the cost-effective technique of mutagenesis and selection, known as \"random screening,\" remains a preferred method for efficient short-term strain development. This review aims to comprehensively explore all aspects of strain improvement, focusing on why random mutagenesis continues to be widely adopted.

Strain improvement via chemical mutagen could impart traits with better enzyme production or improved characteristics. The present study sought to investigate the physicochemical properties of pullulanase produced from the wild Bacillus sp and the mutant. The pullulanases produced from the wild and the mutant Bacillus sp. (obtained via induction with ethyl methyl sulfonate) were purified in a-three step purification procedure and were also characterized. The wild and mutant pullulanases, which have molecular masses of 40 and 43.23 kDa, showed yields of 2.3% with 6.0-fold purification and 2.0% with 5.0-fold purification, respectively, and were most active at 50 and 40 °C and pH 7 and 8, respectively. The highest stability of the wild and mutant was between 40 and 50 °C after 1 h, although the mutant retained greater enzymatic activity between pH 6 and 9 than the wild. The mutant had a decreased Km of 0.03 mM as opposed to the wild type of 1.6 mM. In comparison to the wild, the mutant demonstrated a better capacity for tolerating metal ions and chelating agents. These exceptional characteristics of the mutant pullulanase may have been caused by a single mutation, which could improve its utility in industrial and commercial applications.

Brevibacillus sp. SPR20 produced potentially antibacterial substances against methicillin-resistant Staphylococcus aureus (MRSA). The synthesis of these substances is controlled by their biosynthetic gene clusters. Several mutagenesis methods are used to overcome the restriction of gene regulations when genetic information is absent. Atmospheric and room temperature plasma (ARTP) is a powerful technique to initiate random mutagenesis for microbial strain improvement. This study utilized an argon-based ARTP to conduct the mutations on SPR20. The positive mutants of 40% occurred. The M27 mutant exhibited an increase in anti-MRSA activity when compared to the wild-type strain, with the MIC values of 250-500 and 500 μg/mL, respectively. M27 had genetic stability because it exhibited constant activity throughout fifteen generations. This mutant had similar morphology and antibiotic susceptibility to the wild type. Comparative proteomic analysis identified some specific proteins that were upregulated in M27. These proteins were involved in the metabolism of amino acids, cell structure and movement, and catalytic enzymes. These might result in the enhancement of the anti-MRSA activity of the ARTP-treated SPR20 mutant. This study supports the ARTP technology designed to increase the production of valuable antibacterial agents.

In the control of plant diseases, biocontrol has the advantages of being efficient and safe for human health and the environment. The filamentous fungus Trichoderma harzianum and its closely related species can inhibit the growth of many phytopathogenic fungi, and have been developed as commercial biocontrol agents for decades. In this review, we summarize studies on T. harzianum species complex from the perspective of strain improvement. To elevate the biocontrol ability, the production of extracellular proteins and compounds with antimicrobial or plant immunity-eliciting activities need to be enhanced. In addition, resistance to various environmental stressors should be strengthened. Engineering the gene regulatory system has the potential to modulate a variety of biological processes related to biocontrol. With the rapidly developing technologies for fungal genetic engineering, T. harzianum strains with increased biocontrol activities are expected to be constructed to promote the sustainable development of agriculture.

Studies on the microorganisms used in food production are of interest because microbial genotypes are reflected in food qualities such as taste, flavor, and yield. However, several microbes are nonmodel organisms, and their analysis is often limited by the lack of genetic tools. Tetragenococcus halophilus, a halophilic lactic acid bacterium used in soy sauce fermentation starter culture, is one such microorganism. The lack of DNA transformation techniques for T. halophilus makes gene complementation and disruption assays difficult. Here, we report that the endogenous insertion sequence ISTeha4, belonging to the IS4 family, is translocated at an extremely high frequency in T. halophilus and causes insertional mutations at various loci. We developed a method named targeting spontaneous insertional mutations in genomes (TIMING), which combines high-frequency insertional mutations and efficient PCR screening, enabling the isolation of gene mutants of interest from a library. The method provides a reverse genetics and strain improvement tool, does not require the introduction of exogenous DNA constructs, and enables the analysis of nonmodel microorganisms lacking DNA transformation techniques. Our results highlight the important role of insertion sequences as a source of spontaneous mutagenesis and genetic diversity in bacteria. IMPORTANCE Genetic and strain improvement tools to manipulate a gene of interest are required for the nontransformable lactic acid bacterium Tetragenococcus halophilus. Here, we demonstrate that an endogenous transposable element, ISTeha4, is transposed into the host genome at an extremely high frequency. A genotype-based and non-genetically engineered screening system was constructed to isolate knockout mutants using this transposable element. The method described enables a better understanding of the genotype-phenotype relationship and serves as a tool to develop food-grade-appropriate mutants of T. halophilus.

In recent years, mass spectrometry-based metabolomics has been established as a powerful and versatile technique for studying cellular metabolism by comprehensive analysis of metabolites in the cell. Although there are many scientific reports on the use of metabolomics for the elucidation of mechanism and physiological changes occurring in the cell, there are surprisingly very few reports on its use for the identification of rate-limiting steps in a synthetic biological system that can lead to the actual improvement of the host organism. In this mini review, we discuss different strategies for improving strain performance using metabolomics data and compare the application of metabolomics-driven strain improvement techniques in different host microorganisms. Finally, we highlight several success stories on the use of metabolomics-driven strain improvement strategies, which led to significant bioproductivity improvements.