OBJECTIVE: This study aimed to establish a predictive nomogram model for recollapse of fractured vertebra after posterior pedicle screw fixation in thoracolumbar fractures (TLFs).
METHODS: Patients undergoing posterior pedicle screw fixation for TLFs at our hospital between January 2016 and December 2021 were retrospectively reviewed. Patients were divided into 2 groups according to the presence or absence of recollapse of the fractured vertebra at the final follow-up. The predictors for fractured vertebra recollapse were identified by univariate and multivariable logistic regression analysis, and a nomogram model was developed. The prediction performance and internal validation were established.
RESULTS: A total of 224 patients were included in this study. Of these, 46 (20.5%) patients developed recollapse of fractured vertebra. Age, thoracic and lumbar injury severity score, screw distribution in the fractured vertebra, and anterior vertebral height compression ratio were associated with vertebral recollapse. These predictors were used to construct a predictive nomogram. The area under the receiver operating characteristic curve of the nomogram model was 0.891. The concordance index was 0.891, and it was 0.877 with bootstrapping validation. The calibration curves and decision curve analysis also suggested that the nomogram model had excellent predictive performances for fractured vertebra recollapse.
CONCLUSIONS: A clinical nomogram incorporating 4 variables was constructed to predict fractured vertebra recollapse after posterior pedicle screw fixation for TLFs. The nomogram demonstrated good calibration and discriminative abilities, which may help clinicians to make better treatment decisions.

BACKGROUND: Minimally invasive posterior fixation surgery for pyogenic spondylitis is known to reduce invasiveness and complication rates; however, the outcomes of concomitant insertion of pedicle screws (PS) into the infected vertebrae via the posterior approach are undetermined. This study aimed to assess the safety and efficacy of PS insertion into infected vertebrae in minimally invasive posterior fixation for thoracolumbar pyogenic spondylitis.
METHODS: This multicenter retrospective cohort study included 70 patients undergoing minimally invasive posterior fixation for thoracolumbar pyogenic spondylitis across nine institutions. Patients were categorized into insertion and skip groups based on PS insertion into infected vertebrae, and surgical data and postoperative outcomes, particularly unplanned reoperations due to complications, were compared.
RESULTS: The mean age of the 70 patients was 72.8 years. The insertion group (n = 36) had shorter operative times (146 versus 195 min, p = 0.032) and a reduced range of fixation (5.4 versus 6.9 vertebrae, p = 0.0009) compared to the skip group (n = 34). Unplanned reoperations occurred in 24% (n = 17) due to surgical site infections (SSI) or implant failure; the incidence was comparable between the groups. Poor infection control necessitating additional anterior surgery was reported in four patients in the skip group.
CONCLUSIONS: PS insertion into infected vertebrae during minimally invasive posterior fixation reduces the operative time and range of fixation without increasing the occurrence of unplanned reoperations due to SSI or implant failure. Judicious PS insertion in patients with minimal bone destruction in thoracolumbar pyogenic spondylitis can minimize surgical invasiveness.

UNASSIGNED: Hirayama disease is a rare form of motor neuron amyotrophy that usually presents with weakness and atrophy of the distal upper extremities in young males. It is believed that it is caused by spinal cord compression during neck flexion because of the widening of the posterior extradural space. This case has been brought to attention due to its extraordinary rarity, serving as an educational tool for medical professionals and to advocate for surgical intervention when deemed necessary.
UNASSIGNED: The authors present a case of a young male in his 20s who was diagnosed with Hirayama disease, had weakness and atrophy in both of his upper limbs, and has been successfully treated by posterior fixation at C4, C5, and C6 with lateral mass screws.
UNASSIGNED: The majority of cases stabilize after 2-3 years of progression; therefore, cervical collars are generally sufficient for therapy. However, in certain serious cases with progression even after that time, surgical intervention is an option. Because this is such an uncommon incidence, surgical therapy has not been explored and is controversial.
UNASSIGNED: The use of posterior fixation at C4, C5, and C6 with lateral mass screws as a therapy for Hirayama disease may be regarded as a successful approach.

BACKGROUND: The emerging of the C2 isthmus screw fixation technique is gaining popularity in the setting of atlantoaxial dislocation or other conditions requiring fixation of C2. However, the biomechanical stability of this fixation is poorly understood.
OBJECTIVE: To compare and elucidate the biomechanical stability of C2 pedicle screw (C2PS), C2 isthmus screw (C2IS) and C2 short isthmus screw (C2SIS) fixation techniques in atlantoaxial dislocation (AAD).
METHODS: A three-dimensional finite element model (FEM) from occiput to C3 was established and validated from a healthy male volunteer. Three FEMs, C1 pedicle screw (PS)-C2PS, C1PS-C2IS, C1PS-C2SIS were also constructed. The range of motion (ROM) and the maximum von Mises stress under flexion, extension, lateral bending and axial rotation loading were analyzed and compared. The pullout strength of the three fixations for C2 was also evaluated.
RESULTS: C1PS-C2IS model showed the greatest decrease in ROM with flexion, extension, lateral bending and axial rotation. C1PS-C2PS model showed the least ROM reduction under all loading conditions than both C2IS and C2SIS. The C1PS-C2PS model had the largest von Mises stress on the screw under all directions followed by C1PS-C2SIS, and lastly the C1PS-C2IS. Under axial rotation and lateral bending loading, the three models showed the maximum and minimum von Mises stress on the screw respectively. The stress of the three models was mainly located in the connection of the screw and rod. Overall, the maximum screw pullout strength for C2PS, C2IS and C2SIS were 729.41N, 816.62N, 640.54N respectively.
CONCLUSIONS: In patients with atlantoaxial dislocations, the C2IS fixation provided comparable stability, with no significant stress concentration. Furthermore, the C2IS had sufficient pullout strength when compared with C2PS and C2SIS. C2 isthmus screw fixation may be a biomechanically favourable option in cases with AAD. However, future clinical trials are necessary for the evaluation of the clinical outcomes of this technique.

Neurofibromatosis-1 (NF1) presents complex challenges due to its multisystemic effects, including kyphoscoliosis, dural ectasia, and arteriovenous fistulas (AVF). We present a case of a 31-year-old male with NF1 exhibiting severe cervical kyphoscoliosis, dural ectasia, a bisected cervical cord, and an arteriovenous fistula, highlighting the intricacies of managing such intricate cases. Rapid weakening in the patient\'s right arm and leg prompted imaging revealing severe cervical kyphotic deformity and a dural fold dividing the spinal cord. Surgical intervention addressed a high-flow arteriovenous fistula involving the right vertebral artery and an epidural vein, necessitating sacrifice of the artery. Posterior fusion and laminectomy were performed, resulting in stable neurological status postoperatively and significant improvement in sensory loss and weakness at three months. This case underscores the importance of a tailored posterior-only approach, involving dural fold release, to allow the spinal cord to relocate to a less tense position, thus demonstrating effective decompression in complex NF1 cases with concurrent kyphotic deformity and vertebral artery AVF.

Dyspnea has been reported to occur following posterior occipitocervical fusion. However, there are no documented cases of dyspnea following posterior fixation of the middle and lower cervical spine without posterior occipitocervical fusion. An 80-year-old woman underwent corrective fusion from T4 to the ilium for kyphoscoliosis. Sixteen months later, the patient developed cervical kyphosis (dropped head syndrome) with proximal junctional kyphosis, leading to a pedicle subtraction osteotomy at T4 and an extended fixation to C2. On the sixth postoperative day, the patient experienced respiratory arrest, prompting a reoperation to reduce cervical lordosis, ultimately resolving the respiratory dysfunction. Excessive correction of cervical kyphosis should be avoided to prevent the occurrence of postoperative dyspnea, even in cases where posterior occipitocervical fusion has not been performed.

BACKGROUND: We aim to assess the effects of gastric posterior fixation with fibrin sealant in laparoscopic sleeve gastrectomy in aspects of 12th-month body mass index and gastric volume.
METHODS: The patients who underwent laparoscopic sleeve gastrectomy between January 2019 and February 2021 were divided into two groups preoperatively. The first 75 patients were appointed to the posterior fixation group, and the second 75 were to the control group. Changes in gastric volume and body mass index were assessed in the postoperative 12th month.
RESULTS: There were 110 patients in the final analysis. Fifty-four patients had posterior fixation, and 56 had only laparoscopic sleeve gastrectomy. The posterior fixation group was superior in terms of total weight loss rate (39.1% vs. 34.5%, p<0.001) and less gastric volume increase rate (39.8% vs. 164.7%, p<0.001) in the postoperative 12th month.
CONCLUSIONS: Our study suggests that posterior fixation with fibrin sealant in laparoscopic sleeve gastrectomy is a promising method for preventing weight regain and creating a need for revision surgery.

OBJECTIVE: This study aimed to investigate the clinical outcomes of posterior fixation, combined with one- or two-stage anterior debridement and bone grafting in treating children younger than 3 years of age with thoracic and lumbar tuberculosis.
METHODS: This was a retrospective study involving 16 young children with thoracic or lumbar tuberculosis. Surgical data were recorded. Frankel Grade was used to assess neurological function. The regional kyphosis angle was measured to evaluate the deformity correction. Erythrocyte sedimentation rate (ESR) and C-reactive protein (CRP) levels were detected to assess the activity of tuberculosis. Bony fusion and complications were also recorded.
RESULTS: The mean operation time was 204.4 ± 41.8 min. The mean estimated blood loss was 126.3 ± 94.4 ml. Preoperative Frankel Grade results indicated five patients with Grade C, six with Grade D, and five with Grade E. At the final follow-up, all patients were in Grade E. Twelve patients were brought back to normal spinal alignment and the rest four patients remained kyphotic. There was an improvement of 29.3° ± 18.3° in regional kyphotic angle postoperatively. And the deformity correction was 27.4° ± 19.1° at the final follow-up. ESR and CRP decreased to a normal range at three months follow-up. Bony fusion was achieved in all patients. None of the cases developed fixation failure, pseudoarthrosis, or tuberculosis recurrence.
CONCLUSIONS: Posterior fixation, combined with one- or two-stage anterior debridement and bone grafting, is a safe and effective surgical strategy for treating young children with thoracic and lumbar tuberculosis.

Objective: To investigate the biomechanical characteristics of different posterior fixation techniques in treatment of osteoporotic thoracolumbar burst fractures by finite element analysis. Methods: The Dicom format images of T10-L5 segments were obtained from CT scanning of a volunteer, and transferred to the Geomagic Studio software, which was used to build digital models. L1 osteoporotic burst fracture and different posterior fixation techniques were simulated by SolidWorks software. The data of ROM, the maximum displacement of fixed segment, ROM of fractured L1 vertebrae, the stress on the screws and rods as well as on fractured L1 vertebrae under different movement conditions were collected and analysed by finite element analysis. Results: Among the four groups, the largest ROM of fixed segment, the maximum displacement of fixed segment and ROM of fractured vertebrae occurred in CBT, and the corresponding data was 1.3°, 2.57 mm and 1.37°, respectively. While the smallest ROM of fixed segment, the maximum displacement of fixed segment and ROM of fractured vertebrae was found in LSPS, and the corresponding data was 0.92°, 2.46 mm and 0.89°, respectively. The largest stress of screws was 390.97 Mpa, appeared in CBT, and the largest stress of rods was 84.68 MPa, appeared in LSPS. The stress concentrated at the junction area between the root screws and rods. The maximum stress on fractured vertebrae was 93.25 MPa, appeared in CBT and the minimum stress was 56.68 MPa, appeared in CAPS. And the stress of fractured vertebrae concentrated in the middle and posterior column of the fixed segment, especially in the posterior edge of the superior endplate. Conclusion: In this study, long-segment posterior fixation (LSPF) provided with the greatest stability of fixed segment after fixation, while cortical bone screw fixation (CBT) provided with the smallest stability. Cement-augmented pedicle screw-rod fixation (CAPS) and combined using cortical bone screw and pedicle screw fixation (CBT-PS) provided with the moderate stability. CBT-PS exhibited superiority in resistance of rotational torsion for using multiple connecting rods. CAPS and CBT-PS maybe biomechanically superior options for the surgical treatment of burst TL fractures in osteoporotic patients.

BACKGROUND: Pedicle screw loosening and breakage are common causes of revision surgery after lumbar fusion. Thus, there remains a continued need for supplemental fixation options that offer immediate stability without the associated failure modes. This finite element analysis compared the biomechanical properties of a novel cortico-pedicular posterior fixation (CPPF) device with those of a conventional pedicle screw system (PSS).
METHODS: The CPPF device is a polyetheretherketone strap providing circumferential cortical fixation for lumbar fusion procedures via an arcuate tunnel. Using a validated finite element model, we compared the stability and load transfer characteristics of CPPF to intact conditions under a 415 N follower load and PSS conditions under a 222 N preload. Depending on the instrumented levels, two different interbody devices were used: a lateral lumbar interbody device at L4-5 or an anterior lumbar interbody device at L5-S1. Primary outcomes included range of motion of the functional spinal units and anterior load transfer, defined as the total load through the disk and interbody device after functional motion and follower load application.
RESULTS: Across all combinations of interbody devices and lumbar levels evaluated, CPPF consistently demonstrated significant reductions in flexion (ranging from 90 to 98%), extension (ranging from 88 to 94%), lateral bending (ranging from 75 to 80%), and torsion (ranging from 77 to 86%) compared to the intact spine. Stability provided by the CPPF device was comparable to PSS in all simulations (range of motion within 0.5 degrees for flexion-extension, 0.6 degrees for lateral bending, and 0.5 degrees for torsion). The total anterior load transfer was higher with CPPF versus PSS, with differences across all tested conditions ranging from 128 to 258 N during flexion, 89-323 N during extension, 135-377 N during lateral bending, 95-258 N during torsion, and 82-250 N during standing.
CONCLUSIONS: Under the modeled conditions, cortico-pedicular fixation for supplementing anterior or lateral interbody devices between L4 and S1 resulted in comparable stability based on range of motion measures and less anterior column stress shielding based on total anterior load transfer measures compared to PSS. Clinical studies are needed to confirm these finite element analysis findings.