The study aimed to develop a quantitative colorimetric loop-mediated isothermal amplification technique using the phenol red indicator (QLAMP-PhR) for detecting Fusobacterium nucleatum (Fn) levels in colorectal cancer (CRC) patients and healthy individuals. QLAMP-PhR assays were conducted on 251 stool samples specific for the Fn FadA gene. Six primers were synthesized and utilized with master mix reagents, and a phenol red indicator was employed to enhance the QLAMP-PhR technique. A standard quantitative analysis curve was generated using a logarithmic function (absorbance vs. concentration) by serially diluting the copy number of genomic DNA templates (Fn ATCC25586). The CRC group exhibited a significantly higher abundance of Fn compared to the healthy control group (P < 0.001). These findings suggest that the QLAMP-PhR technique effectively identifies Fn specifically by its gene for the key virulence factor FadA. Additionally, ideas for developing a real-time QLAMP-PhR test were presented. Compared to the traditional polymerase chain reaction (PCR) technique, QLAMP-PhR offers several advantages including rapidity, simplicity, specificity, sensitivity, and cost-effectiveness method that can quantitatively screen for Fn presence in normal populations. The QLAMP-PhR method represents a sensitive and specific amplification assay for the rapid detection of the Fn pathogen. To the best of our knowledge, this study is the first to report the application of QLAMP-PhR for detecting FadA in Fn.

Single-pass intestinal perfusion (SPIP) method is a widely used experimental model to determine the intestinal permeability of drugs. These studies are performed in the presence of a reference standard (metoprolol, MT) and a zero permeability marker (phenol red, PR). Therefore, it is important to develop a validated method for simultaneous determination of the investigated compound along with MT and PR. The aim of this study was to develop a reversed phase high-performance liquid chromatography (RP-HPLC) method with UV-detection for the simultaneous determination of atenolol (ATN), MT, and PR in the perfusion medium used in SPIP experiments. Separation of compounds were performed using an InertSustain C18 (250 × 4.6 mm, 5 µm) HPLC column at 35 °C. The mobile phase was a mixture of acetonitrile and phosphate buffer (pH 7.0, 12.5 mM) in gradient elution, and was delivered at a flow rate of 1 mL/min. The acetonitrile ratio of the mobile phase increased linearly from 10 to 35 % over 15 min. The injection volume was 20 µL, and ATN, MT and PR were detected at 224 nm. The retention times under optimum HPLC conditions were 5.028 min, 12.401 min, and 13.507 min for ATN, MT and PR, respectively. The developed RP-HPLC method was validated for selectivity, specificity, calibration curve and range, accuracy and precision, carry-over effect, stability, reinjection reproducibility, recovery and robustness. The method was linear for ATN (0.76-50 μg/mL), MT (1.14-50 μg/mL), and PR (0.47-20 μg/mL) with determination coefficients of 0.9999, 0.9994 and 0.9998, respectively. The results obtained for all validation parameters of the developed RP-HPLC method met the required limits of the ICH M10 Guideline.

This work studied the degradation reaction of sulfonated dyes, indigo carmine, phenol red, and their mixtures by non-thermal plasma (NTP). Interestingly, the degradation rate constant showed a faster process and lower activation energy (Ea) for the dye mixtures than for the degradation reaction of the individual dyes. This unexpected result opened up new opportunities for understanding plasma chemistry and the interaction between reactive species formed by the plasma and the target molecule. As no catalyst or chemical additive was added to the reactor, the decrease in Ea came from a self-synergistic effect (SSE), through the dye molecules fragmentation, which resulted in plasma catalysis. The hypothesis proposed in this work is that oxysulfur (SOx) species are formed by the desulfonation reaction of dyes. The sulfonic groups (SO3) present in the chemical structures of dyes can function as precursors for forming several SOx•- species. Studies based on oxygenated sulfonated species such as SO3•-, SO4•- and SO5•- have been widely applied in advanced oxidative and reductive processes due to their satisfactory efficiency and low cost. Among them, SO4•- is the key reactive species with the best performance in the degradation of pollutants due to its high oxidation potential (E° = 2.60 V). In addition, it is an alternative source of HO• in aqueous media, improving the oxidation reaction. In order to elucidate the SSE, the kinetic process was followed by UV-Vis analysis, and the reactive species, such as alkyl, hydroxyl, and oxy-sulfur radicals were identified by Electron Paramagnetic Resonance. The by-products of the NTP degradation reaction were analyzed by ultrafast liquid chromatography coupled with a mass spectrometer, and a fragmentation route was proposed.

For some aquatic products, pH has been considered a useful index to reflect the changes in materials during the loss of freshness. Based on the inner filter effect (IFE) between deprotonated phenol red (PR) and upconversion nanoparticles (UCNPs), UCNPs coated with PR-doped SiO2 shell were embedded in agarose hydrogel to develop a smartphone-assisted method for pH sensing. With the enhancement of pH response using a phase transfer agent (i.e., tetra butyl ammonium hydroxide, TBAH), the proposed senor realized the colorimetric and fluorescence detection of pH in the range of pH 6.6-8 and pH 6-8, respectively. The sensor also showed satisfied reversibility when switched between pH 6 and 8 for at least 5 cycles. Moreover, this sensor displayed great sensitivity, stability, and portability in analyzing actual fish, shrimp, and shellfish samples, providing a new sight for evaluating the freshness of aquatic products.

In this study, we successfully developed a screen-printed pH-responsive intelligent label using low molecular weight chitosan grafted with phenol red (LCPR) as a colorant for screen printing ink. The LCPR was synthesized via a Mannich reaction, and its successful grafting was confirmed through FT-IR, UV-vis, and NMR spectroscopy. The LCPR exhibited lower crystallinity and thermal stability compared to low molecular weight chitosan (LC) and demonstrated zwitterionic behavior. To create intelligent labels, the LCPR-based ink was efficiently printed on cotton substrates with high resolution. The label exhibited remarkable sensitivity to buffer pH solutions and ammonia gas, leading to distinctive color changes from orange to red to purple. Additionally, the label showed excellent reversibility, storage stability, and leaching resistance to different food simulant solutions. The label was utilized to monitor shrimp freshness, successfully detecting a noticeable color shift upon spoilage. These findings highlight the significant potential of the LCPR-based label as an intelligent food packaging solution, offering pH-responsiveness and color stability for qualitative freshness detection of protein-rich food.

The dramatic increase of drug-resistant pathogenic bacteria has seriously effect on human health, appealing the needs of developing theranostic platforms with stimuli-responsive materials to realize the accurate bacterial diagnostics and therapeutics. Herein, a tannic acid and carboxymethyl chitosan-based multifunctional ZIF-90@i-PPOPs-phenol red double-layered hydrogel with stimuli-responsiveness and antibacterial activity was fabricated. The inner layer hydrogel (ZIF-90@i-PPOPs-based TFC hydrogels) was fabricated based on ZIF-90@i-PPOPs, integrate tannic acid and carboxymethyl chitosan linked by formylphenylboronic acid (FPBA), which exhibited outstanding injectable, biodegradability and antibacterial activity. The outer layer hydrogel (PR@PAM hydrogels) were constructed from polyacrylamide (PAM) and pH indicator phenol red, owning porous structure and excellent tissue adhesion. Due to the weakly acidic microenvironment within wound, the inner-layer hydrogel was stimulus-responsively decomposed, resulting in the accurate delivery of the positively charged ZIF-90@i-PPOPs to the lesion site to capture and kill bacteria by enhanced Zn2+ and ROS release. Meantime, the outer-layer hydrogel could real-timely monitor the pH changes to evaluate the wound recovery status. These double-layered hydrogels possessed precisely pH monitoring capacity, excellent antibacterial ability and negligible side effect to normal tissue in vivo, implying the high potential of the suggested hydrogels as theranostic platform for antibacterial treatment.

BACKGROUND: To investigate the validation of phenol red thread (PRT) test in a Chinese population by evaluating the intraobserver repeatability and interobserver reproducibility, determining correlations between the PRT test and other dry eye disease (DED) parameters including tear meniscus height (TMH) and Schirmer I test, and testing the accuracy of diagnosing DED when using the PRT test alone.
METHODS: A total of 108 eyes were involved in this prospective and diagnostic study, and were divided into two groups (with and without DED). Each subject underwent a series of ocular surface examinations, including Ocular Surface Disease Index (OSDI) questionnaire, non-invasive tear breakup time (NIBUT), tear meniscus height (TMH) assessment, PRT test, fluorescein tear breakup time (FBUT), corneal fluorescein staining and Schirmer I test.
RESULTS: In the experimental group and the control group, the intra-class correlation coefficients (ICCs) of the repeatability were 0.747 and 0.723, respectively (all P < 0.05). The ICCs of the reproducibility in both groups were 0.588 and 0.610, respectively (all P < 0.05). The PRT test correlated weakly with the Schirmer I test and the tear meniscus height, with Spearman coefficients of 0.385 and 0.306, respectively (all P < 0.05). The PRT test is available to diagnose DED, with an area under the curve of 0.806 and a Youden index of 0.556 at the cutoff point of 8.83 mm.
CONCLUSIONS: The PRT test can provide patients a comfortable, timesaving and less irritating approach to screening and diagnosing DED compared to Schirmer I test.

OBJECTIVE: To assess the tear film parameters in breastfeeding women. satisfaction.
UNASSIGNED: The observational study was conducted at the College of Applied Medical Sciences, Riyadh, Saudi Arabia, from December 15, 2021, to February 12, 2022, and comprised healthy women aged 18-40 years who had no ocular diseases. Breastfeeding women were in group A and non-breastfeeding women formed the control group B. Ocular surface disease index, phenol red thread, and tear ferning tests were used in that order to assess the tear film for all the subjects. A gap of 5 minutes was allowed between phenol red thread and tear ferning tests. Data was analysed using SPSS, version 22.
RESULTS: Of the 50 subjects, 25(50%) were in group A with mean age 30.4±5.9 years having a mean breastfeeding period of 5.4±5.0 months. The remaining 25(50%) women were in group B with mean age 28.5±2.1 years. Significant differences were found between the groups for ocular surface disease index, phenol red thread, and tear ferning (p<0.05). Significant moderate correlation was found between tear ferning grades and breastfeeding duration (p<0.05).
UNASSIGNED: Breastfeeding was found to increase dry eye symptoms in women.

Post-natal or newborn screening for thalassemia and hemoglobinopathies is useful for genetic counseling and managing thalassemia in children. We characterized thalassemia genotypes in newborns from the eastern part of Thailand. The results demonstrated a high heterogeneity of thalassemia and hemoglobinopathies with seventeen genotypes. We focused on α0- thalassemia (Southeast Asian [SEA] deletion) in this study. We developed and validated the loop-mediated isothermal amplification (LAMP) colorimetric assay for detecting α0- thalassemia (SEA deletion) using simple direct cord blood sampling compared to genomic DNA. A total of 160 cord blood samples were evaluated with the LAMP assay. The sensitivity and specificity of the LAMP colorimetric assay for α0-thalassemia (SEA deletion) using direct cord blood showed 100% (6/6 x 100) and 98.05% (151/154 x 100) whereas, genomic DNA showed 100% (6/6 x 100) and 100% (154/154 x 100), respectively. Moreover, we demonstrated other simple screening tools for α0-thalassemia with %Hb Bart\'s, MCV, and MCH values and found that these parameters were not diagnostic in our samples. The direct cord blood with colorimetric LAMP assay is simple, rapid, and does not require a post-LAMP step compared to conventional PCR. These techniques could be applied in post-natal or large population screening for α0-thalassemia (SEA deletion). Finally, this could support early prevention of complications, early management, genetic counseling for α-thalassemia disease in children, or a long-term prevention and control program of severe thalassemia in Thailand.

The current COVID-19 pandemic has made patent the need for rapid and cost-effective diagnostic tests, crucial for future infectious outbreaks. Loop-mediated isothermal amplification (LAMP) is a promising and decentralized alternative to qPCR. In this work we have developed a sensitive, fast, and simple innovative methodology for quantification of SARS-CoV-2 RNA copies, combining reverse-transcription LAMP with electrochemical detection. This is based on the oxidation of phenol red (PR), a visual and electroactive LAMP indicator, which oxidation peak potential (Ep) changes with the progress of the LAMP reaction. Using that Ep shift as analytical signal, a calibration curve was obtained for fragment N1 copies of SARS-CoV2 (which provided better results than N or S fragments), with a potential shift of 16.2 mV per order of magnitude, and a practical limit of detection of 21 copies·μL-1. Moreover, the precision of Ep is excellent (RSD < 2%): 557 ± 5 mV for negative and 602 ± 7 mV for positive (2148 N fragment RNA copies·µL-1·-1) LAMP controls. This methodology has been applied to the analysis of nasopharyngeal swab samples, resulting in total concordance with clinical RT-qPCR results. Advances towards fully decentralization have been achieved by designing and fabricating a small portable heater for isothermal procedures, obtaining comparable results to those from a commercial benchtop thermal cycler.