We aimed to determine effects of aliskiren, a direct renin inhibitor, loaded onto polymeric nanoparticles on the (pro)renin receptor (Atp6ap2), angiotensin II type 1 receptor (Agtr1), and angiotensin-converting enzyme (ACE) gene expression in the heart of spontaneously hypertensive rats (SHR). Twelve-week-old male SHRs were divided into an untreated group and groups treated with powdered aliskiren or aliskiren-loaded nanoparticles (25 mg/kg/day). After three weeks, the accumulation of aliskiren, distribution of polymeric nanoparticles, gene expression of Atp6ap2 and Agtr1 receptors and ACE, and protein expression of NADPH oxidase along with the conjugated diene (CD) concentration were analyzed. The accumulation of aliskiren in the heart was higher in the aliskiren-loaded nanoparticle group than in the powdered group. The fluorescent signals of nanoparticles were visible in cardiomyocytes, vessel walls, and erythrocytes. Aliskiren-loaded nanoparticles decreased the gene expression of Atp6ap2 and ACE, while not affecting Agtr1. Both forms of aliskiren decreased the protein expression of NADPH oxidase, with a more pronounced effect observed in the aliskiren-loaded nanoparticle group. CD concentration was decreased only in the aliskiren-loaded nanoparticle group. We hypothesize that aliskiren-loaded nanoparticle-mediated downregulation of Atp6ap2 and ACE may contribute to a decrease in ROS generation with beneficial effects in the heart. Moreover, polymeric nanoparticles may represent a promising tool for targeted delivery of aliskiren.

Leishmaniasis is the 3rd most challenging vector-borne disease after malaria and lymphatic filariasis. Currently, no vaccine candidate is approved or marketed against leishmaniasis due to difficulties in eliciting broad immune responses when using sub-unit vaccines. The aim of this work was the design of a particulate sub-unit vaccine for vaccination against leishmaniasis. The poly (D,L-lactide) nanoparticles (PLA-NPs) were developed in order to efficiently adsorb a recombinant L. major histone H2B (L. major H2B) and to boost its immunogenicity. Firstly, a study was focused on the production of well-formed nanoparticles by the nanoprecipitation method without using a surfactant and on the antigen adsorption process under mild conditions. The set-up preparation method permitted to obtain H2B-adsorbed nanoparticles H2B/PLA (adsorption capacity of about 2.8% (w/w)) with a narrow size distribution (287 nm) and a positive zeta potential (30.9 mV). Secondly, an in vitro release assay performed at 37 °C, pH 7.4, showed a continuous release of the adsorbed H2B for almost 21 days (30%) from day 7. The immune response of H2B/PLA was investigated and compared to H2B + CpG7909 as a standard adjuvant. The humoral response intensity (IgG) was substantially similar between both formulations. Interestingly, when challenged with the standard parasite strain (GLC94) isolated from a human lesion of cutaneous leishmaniasis, mice showed a significant reduction in footpad swelling compared to unvaccinated ones, and no deaths occurred until week 17th. Taken together, these results demonstrate that PLA-NPs represent a stable, cost-effective delivery system adjuvant for use in vaccination against leishmaniasis.

BACKGROUND: After the golden age of antibiotic discovery, bacterial infections still represent a major challenge for public health worldwide. The biofilm mode of growth is mostly responsible for chronic infections that current therapeutics fail to cure and it is well-established that novel strategies must be investigated. Particulate drug delivery systems are considered as a promising strategy to face issues related to antibiotic treatments in a biofilm context. Particularly, poly-lactic acid (PLA) nanoparticles present a great interest due to their ability to migrate into biofilms thanks to their submicronic size. However, questions still remain unresolved about their mode of action in biofilms depending on their surface properties. In the current study, we have investigated the impact of their surface charge, firstly on their behavior within a bacterial biofilm, and secondly on the antibiotic delivery and the treatment efficacy.
RESULTS: Rifampicin-loaded PLA nanoparticles were synthetized by nanoprecipitation and characterized. A high and superficial loading of rifampicin, confirmed by an in silico simulation, enabled to deliver effective antibiotic doses with a two-phase release, appropriate for biofilm-associated treatments. These nanoparticles were functionalized with poly-L-lysine, a cationic peptide, by surface coating inducing charge reversal without altering the other physicochemical properties of these particles. Positively charged nanoparticles were able to interact stronger than negative ones with Staphylococcus aureus, under planktonic and biofilm modes of growth, leading to a slowed particle migration in the biofilm thickness and to an improved retention of these cationic particles in biofilms. While rifampicin was totally ineffective in biofilms after washing, the increased retention capacity of poly-L-lysine-coated rifampicin-loaded PLA nanoparticles has been associated with a better antibiotic efficacy than uncoated negatively charged ones.
CONCLUSIONS: Correlating the carrier retention capacity in biofilms with the treatment efficacy, positively charged rifampicin-loaded PLA nanoparticles are therefore proposed as an adapted and promising approach to improve antibiotic delivery in S. aureus biofilms.

Background: Alopecia treatments are scarce and lack efficacy. Cyclosporin A (CsA) has hair growth-inducing properties but its poor cutaneous absorption undermines its use in topical treatments. Aim: Development of a new potential topical treatment of alopecia with CsA. Materials & methods: CsA-loaded poly(d,l-lactide) (PLA) nanoparticles were obtained and characterized. Skin permeation was evaluated in ex vivo porcine skin. Results: Nanoparticles with good physicochemical stability increased CsA skin permeation/hair follicles accumulation, compared with a noncolloidal formulation. CsA biocompatibility in NCTC2455 keratinocytes (reference skin cell line) was clearly improved when encapsulated in PLA nanoparticles. Conclusion: This work fosters further in vivo investigation of CsA-loaded PLA nanoparticles as a promising new strategy to treat alopecia, a very traumatic, possibly autoimmune, disease.

Designing potent and safe-of-use therapies against cancers and infections remains challenging despite the emergence of novel molecule classes like checkpoint inhibitors or Toll-Like-Receptor ligands. The latest therapeutic perspectives under development for immune modulator administration exploits vectorization, and biodegradable delivery systems are one of the most promising vehicles. Nanoparticles based on Poly (D,L) Lactic Acid (PLA) as polymer for formulation are widely investigated due to its bioresorbable, biocompatible and low immunogen properties. We propose a PLA-based nanoparticle delivery system to vectorize Pam3CSK4, a lipopeptide TLR1/2 ligand and a potent activator of the proinflammatory transcription factor NF-κB that shows a self-assembling behavior from 30 µg/mL onwards. We demonstrate successful encapsulation of Pam3CSK4 in PLA nanoparticles by nanoprecipitation in a 40-180 µg/mL concentration range, with 99% of entrapment efficiency. By molecular modelling, we characterize drug/carrier interactions and conclude that Pam3CSK4 forms clusters onto the nanoparticle and is not encapsulated into the hydrophobic core. In silico predictions provide nanoprecipitation optimization and the mechanistic understanding of the particle dynamics. The loaded-Pam3CSK4 maintains bioactivity on TLR2, confirmed by in vitro experiments using reporter cell line HEK-Blue hTLR2. Our presented data and results are convincing evidence that Pam3CSK4-loaded in PLA nanoparticles represent a promising immune modulating system.

Aliskiren, a renin inhibitor, has been shown to have cardioprotective and blood pressure (BP) lowering effects. We aimed to determine the effects of nanoparticle-loaded aliskiren on BP, nitric oxide synthase activity (NOS) and structural alterations of the heart and aorta developed due to spontaneous hypertension in rats. Twelve week-old male spontaneously hypertensive rats (SHR) were divided into the untreated group, group treated with powdered or nanoparticle-loaded aliskiren (25 mg/kg/day) and group treated with nanoparticles only for 3 weeks by gavage. BP was measured by tail-cuff plethysmography. NOS activity, eNOS and nNOS protein expressions, and collagen content were determined in both the heart and aorta. Vasoactivity of the mesenteric artery and wall thickness, inner diameter, and cross-sectional area (CSA) of the aorta were analyzed. After 3 weeks, BP was lower in both powdered and nanoparticle-loaded aliskiren groups with a more pronounced effect in the latter case. Only nanoparticle-loaded aliskiren increased the expression of nNOS along with increased NOS activity in the heart (by 30%). Moreover, nanoparticle-loaded aliskiren decreased vasoconstriction of the mesenteric artery and collagen content (by 11%), and CSA (by 25%) in the aorta compared to the powdered aliskiren group. In conclusion, nanoparticle-loaded aliskiren represents a promising drug with antihypertensive and cardioprotective effects.

One of the main goals in the galenic development of innovative topical treatment options for inflammatory skin diseases such as psoriasis and atopic dermatitis is to selectively deliver the drug at the inflammation site. Recent studies have highlighted the beneficial use of polymeric nanoparticles for anti-inflammatory therapy and topical anti-inflammatory drug delivery due to their ability to form a drug reservoir retaining the drug locally at the site of action. Our approach consisted in designing innovative topical semi-solid formulations of poly(lactic acid) (PLA) nanoparticles as anti-inflammatory drug vehicles for local treatment of inflammatory skin diseases. In the course of this work, five topical formulations containing fluorescent PLA nanoparticles were initially developed, and then screened depending on their physico-chemical properties, toxicity and delivery efficacy. The penetration and permeation of a fluorophore vectorized by PLA nanoparticles into healthy and inflammatory skin were assessed using an alternative device to classical Franz cells: VitroPharma. All these investigations led to the selection of two satisfactory formulations out of five initial candidates.

Scorpion envenoming represents a public health issue in subtropical regions of the world. Treatment and prevention need to promote antitoxin immunity. Preserving antigenic presentation while removing toxin effect remains a major challenge in toxin vaccine development. Among particulate adjuvant, particles prepared with poly (D,L-lactide) polymer are the most extensively investigated due to their excellent biocompatibility and biodegradability. The aim of this study is to develop surfactant-free PLA nanoparticles that safely deliver venom toxic fraction to enhance specific immune response. PLA nanoparticles are coated with AahG50 (AahG50/PLA) and BotG50 (BotG50/PLA): a toxic fraction purified from Androctonus australis hector and Buthus occitanus tunetanus venoms, respectively. Residual toxicities are evaluated following injections of PLA-containing high doses of AahG50 (or BotG50). Immunization trials are performed with the detoxified fraction administered alone without adjuvant. A comparative study of the effect of Freund is also included. The neutralizing capacity of sera is determined in naive mice. Six months later, immunized mice are challenged subcutaneously with increased doses of AahG50. Subcutaneous lethal dose 50 (LD50) of AahG50 and BotG50 is of 575 μg/kg and 1300 μg/kg respectively. By comparison, BotG50/PLA is totally innocuous while 50% of tested mice survive 2875 μg AahG50/kg. Alhydrogel and Freund are not able to detoxify such a high dose. Cross-antigenicity between particulate and soluble fraction is also, ensured. AahG50/PLA and BotG50/PLA induce high antibody levels in mice serum. The neutralizing capacity per mL of anti-venom was 258 μg/mL and 186 μg/mL calculated for anti-AahG50/PLA and anti-BotG50/PLA sera, respectively. Animals immunized with AahG50/PLA are protected against AahG50 injected dose of 3162 μg/kg as opposed all non-immunized mice died at this dose. We find that the detoxification approach based PLA nanoparticles, benefit the immunogenicity and protective efficacy of venom immunogen.

Mucosal surfaces are a major portal of entry for many pathogens that are the cause of infectious diseases. Therefore, effective vaccines that induce a protective immune response at these sites are much needed. However, despite early success with the live attenuated oral polio vaccine over 50 years ago, only a few new mucosal vaccines have been subsequently licensed. Development of new adjuvants, comprising antigen delivery platforms and immunostimulatory molecules, are critical for the successful development of new mucosal vaccines. Among them, biodegradable nanoparticle delivery systems are promising and NOD-like receptors are considered as potential new targets for immunostimulatory molecules. In this work, different NOD1 and NOD2 ligands were encapsulated in polylactic acid (PLA) nanoparticles, coated with HIV-1 gag p24 antigen. We showed that these new formulations are able to induce proliferation of HIV-specific T cells from HIV(+) individuals as well as autophagy. In vivo, these formulations highly enhanced p24-specific systemic and mucosal immune responses in mice not only after mucosal administration but also after immunization via the parenteral route. Our results provide a rational approach for combining nanosized particulate carriers and encapsulated NOD receptor ligands as potent synergistic tools for induction of specific mucosal immunity.

The aim of this study is to prepare a nanosuspension of budesonide for respiratory delivery using nebuliser by optimising its particle size and characterising its in vitro deposition behaviour. PLA (poly lactic acid)-budesonide nanosuspension (BNS) was prepared using high-pressure emulsification/solvent evaporation method. To optimise particle size, different parameters such as PLA concentration, sonication time, and amplitude were investigated. Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and scanning electron microscope (SEM) analyses were performed to characterise the prepared PLA-budesonide nanoparticles. The in vitro aerodynamic characteristics of the PLA-BNS using a jet nebuliser were estimated and compared with that of commercially available suspension formulation of budesonide. Budesonide-loaded PLA nanoparticles with fine particle size (an average size of 224-360 nm), narrow size distribution, and spherical and smooth surface were prepared. The optimum condition for preparation of fine particle size for aerosolisation was found to be at PLA concentration of 1.2 mg/ml and amplitude of 70 for 75 s sonication time. The in vitro aerosolisation performance of PLA-BNS compared to that of commercial budesonide indicated that it has significantly (p < 0.05) smaller mass median aerodynamic diameter (MMAD) value with an enhancement in fine particle fraction (FPF) value. Improving the in vitro deposition of budesonide, PLA-BNS could be considered as a promising alternative suspension formulation for deep lung delivery of the drug using nebuliser.